Is a mass configuration of Metrics and Policies possible?

There are some metrics that we would like to change in all of our databases, and on clusters the the metrics must be configured at the instance level, making this a time-consuming process. Is there a way to change a metric across the board, for every registered instance, a mass deployment if you will? We are using 10.2.0.5 EM

Yes, you should use Monitoring Templates for this
Go to Setup --> Monitoring Templates
Create a Template by using one of your Targets (for instance Database Instance) as base and define the metrics and plocies you want.
Save the Template
Apply the template to all the database instances you want.
Regards
Rob
For more info on working with OEM GC, you might want to check http://oemgc.wordpress.com

Similar Messages

  • Need the default configuration of map-class and policies for WAAS version 5.3.1.20

    Do someone have the default configuraion cli of class-maps and policies for the WAAS version 5.3.1.20. I need this to compare with the configuration that I have in the network, I need the verify what have been changed.

    I'm sure you figured this out already since it's been 9 months.  But just in case someone needs this - you can restore the default policies if they don't show up.  Device Groups -> AllWAASGroup and edit.  There you will see a "Restore default Optimization Policies"

  • Poor Security Metrics and none policies for Sybase Plugin

    Hi.
    I found out that the Sybase Plugin for Grid Control is mostly focused on performance metrics and alerts and I need a more deep intrusion on security matters.
    How can I create metrics or policies for Sybase Targets? or if not, would it be considered on future versions??
    Thanks

    Downgrade your routers firmware to the last known working version by going here.  Now give it a try.

  • Mass configuration of standard ES Bundle ESA Add-On 603

    Hi All:
    We have recently installed and activated the ECC-SE ESA add-on 603 on our SAP ERP 7.0 SP14 with soamanager transaction. I have checked that the add-on, I believe, it is most likely well installed. At least, when I execute the SPROXY transaction and I search for the enterprise service definitions, I can found them all. (All the standard services included on the add-on).
    I have activated on the SICF all the services included on the /default_host/sap/bc/srt/xip/sap/ route, and I have also activated the services for the SOA application manager, where I can successfully enter.
    I have reviewed many documentation available on the SDN but I cannot find how to create a real mass configuration of the standard services included on the ES Bundle. I have reviewed the documentation available at http://help.sap.com/saphelp_nw70/helpdata/EN/47/3431de6c720aa7e10000000a114a6b/frameset.htm , and execute most of the steps included but the documentation is not very good.
    I have entered on the SOAMANAGER transaction and access to the +Technical Configuration / Profile Management +, where I have created a default profile or at least after some attemps it has appeared. I have reviewed all the profile characteristics at seems the correct thing to do.
    1.Create the DEFAULT_PROFILE.
    Later I entered on the Mass Configuration, where you can create a configuration scenario, selecting all the service you want to configure. Here I created a test scenario where I selected some test services such as detailed_flight_info_get, businesspartner.. and so on. Later you save it and you active the configuration scenario.
    I had to assign each one of them to the profile I previously created in order to configured them. My question:
    Is there is a way to skip or to automate this step or I have to manually assign all the 600 services included on the ES Bundle to the default profile in order to "mass configure" them.

    Hi all:
    I have entered on the ES Workplace site and see how configurations are for SOA MANAGER there, I have opened a standard service similar to the one I am trying to configure and I see that it has no services or endpoint either.
    Object Status: Services: 0 / Endpoints: 0
    Porttype Namespace: http://sap.com/xi/EA-APPL/SE/Global
    Porttype Name: MaintenanceOrderCreateRequestConfirmation_In
    Internal Name: ECC_MAINTENANCEORDERCRTRC
    SOAP Applikation: URN:SAP-COM:SOAP:XMS:APPLICATION:XIP
    Package Name: PLM-SE_EAM_XI_PROXY
    So I am a little bit disoriented, I have seem that if I go to WSCONFIG and WSADMIN all the services are there. This makes sense as this is an upgraded version and the services where already created using these transactions. Nonetheless, I am still disoriented I cannot find relation between the soamanager and the wsconfig / wsadmin transactions.
    Frankly, I am starting to believe that I should release the services with the WSCONFIG / WSADMIN, and forget about the soamanager until SAP create a meaningful guide of how to work with this application as currently it makes no sense at all.
    Or perhaps there is a how-to of the configuration steps to perform once a ES Bundle has been activated.
    kind regards

  • 12c - List of Metric and Polciy Settings.

    I am doing research on 12c OEM, specifically what is monitored. What is the "Mertrics and Policy Settings" section in 12g.
    http://docs.oracle.com/cd/E24628_01/doc.121/e24473/toc.htm is the main Cloud Admiins Guide but could not see what I am looking for in there.
    Any links or tips would be welcome
    Ta
    MN

    Hi,
    I am not sure I understand exactly what you are looking for, but I will give a try. If you are looking for information on the "Metric and Policy Settings" page, it no longer exists in EM 12c.
    Metric reference manuals are available here:
    http://docs.oracle.com/cd/E24628_01/nav/reference.htm
    In EM 12c, Compliance Standards replace metric policies. For information on Compliance see:
    http://docs.oracle.com/cd/E24628_01/em.121/e27046/compliance_lcm.htm#CIAIICAF
    Regards,
    - Loc

  • Applying Metric and Policy Settings globally

    Hi,
    I wish to remove some Metric and Policy Settings globally.
    Example: I want to remove monitoring for percentage of space left in tablespaces. Instead, I want to make all tablespaces auto-extensible and only monitor disk space.
    I don't want to go into the configuration of each and every database in order to do this. There must be a way to globally remove out-of-box configurations and globally add a custom configured one, or is that not true?
    Thank you for any insights!
    Maria

    It disappears only because there is a drop down at the top that says to filter "metrics with thresholds" just switch that to "All metrics" and you will see the blank ones again. As for the disabling a collection. A collection is used for many metrics. When you go to disable a metric collection, by clicking on the link for "Every 15 minutes" (for example). It will list all of the metrics that you will no longer collect data for.
    Again, I would suggest not stopping the collection, and simply blanking out the thesholds. Thats the way it was designed.
    Eg. Disabling Archive space used collection will disable the following other metrics:
    Archive Area Used (%)
    Archive Area Used (KB)
    Dump Area Directory
    Dump Area Used (%)
    Dump Area Used (KB)
    Free Archive Area (KB)
    Free Dump Area (KB)
    Total Archive Area (KB)
    Total Dump Area (KB)

  • Confusion on Roles and Policies

    Dear Friends,
         Now i try to understand the what is weblogic and how its component are working .But i have confused with the roles and policies concept in security realm.My Scenario:I have created the one user and assign this user to the monitoring group.Then i want this user to start and stop servers also.So i create the role and policy in managed server security option.But it is not working .I know this is very simple question but i stuck this in many days even i referring the document..I am not able to put my post on security space .So please guide me for creating the roles and policies with example scenario or any documents
    Thanks & Regards,
    Ove.
    Message was edited by: Ove

    the oracle documentation explains this question:
    https://docs.oracle.com/cd/E57014_01/wls/WLACH/taskhelp/security/UseRolesAndPoliciesToSecureResources.html
    https://docs.oracle.com/middleware/1212/wls/ROLES/understdg.htm#ROLES120
    Check this link too:
    https://thecattlecrew.wordpress.com/2014/08/07/it-security-part-7-weblogic-server-roles-role-mapping-and-configuring-a-role-mapping-provider/

  • Firefox 27.1 silent install and configuration(homepage, proxys and bookmark)

    Hello,
    I am trying to perform a silent install and configuration for Firefox 27.1 but I am not able to get the same results I got with versions 26 and below. For these previous versions I used the method described in this link:
    http://www.mockbox.net/configmgr-sccm/174-install-and-configure-firefox-silently
    But for Firefox 27 creating the Mozilla.cfg and the other files doesn't seem to work. Could you please tell me how to silently configure the proxys and homepage on Firefox 27.1 during the install. I also need to add a bookmark during the installation. Could you please tell me how to do that as well? I found some methods saying I had to edit a bookmark.html file but I don't think this file is present on firefox 26 on.
    thank you in advance.
    regards.

    thank you for your reply guigs2, unfortunately none of those links were helpful for me. As I mentioned in my question I already tried the silent install method using the Mozilla.cfg file. It worked for the previous versions but it doesn’t work for version 27 anymore. As for the INI file, that doesn’t help me either since I need to configure the homepage, proxies and bookmarks all during the installation, for the INI all I’ve seen is that you can configure INSTALLDIR, shortcuts etc. Configuring proxies, homepage and bookmarks through group policies as one of the solutions said is not an option for me, I need to do that during the silent install of Firefox 27.

  • Tweaking QoS port parameters and policing

    Hi,
    Is there a mathematical method of configuring bandwidth weights and queue limits or is it more art than science? For example, using the 3550 series switches, when you perform auto-qos, it chooses the following parameters:
    wrr-queue bandwidth 10 20 70 1
    wrr-queue queue-limit 50 25 15 10
    I need to know the reason for how this values were chosen, in order to understand how changing these values affect the overall queueing process. Is there some kind of best practice (recommended) values for setting them? I notice a pattern that bandwidth weights with the exception of the priority queue (qid 4) are larger; whereas the queue-limit values are lower for higher priority traffic, i.e. they get the smallest slice of the egress buffers.
    Also the burst-byte value parameter in policing under policy map. How do you obtain an appropriate value for this? How does that relate to the access-rate?
    In the auto-qos it gives the same 8000 byte value to the burst byte, see below:
    policy-map AutoQoS-Police-SoftPhone
    class AutoQoS-VoIP-RTP-Trust
    set dscp ef
    police 320000 8000 exceed-action policed-dscp-transmit
    class AutoQoS-VoIP-Control-Trust
    set dscp cs3
    police 32000 8000 exceed-action policed-dscp-transmit
    Any help is greatly appreciated.
    Many thanks

    To allocate bandwidth between standard transmit queue 1 (low priority) and standard transmit queue 2 (high priority), use the wrr-queue bandwidth command is used. Use the no form of this command to return to the default settings.
    http://www.cisco.com/en/US/products/hw/switches/ps708/products_command_reference_chapter09186a00801026fa.html#wp1085797

  • Soft for a device mass configuration with variables support

    Hello everyone.
    Does anyone know a soft for mass configuration of Cisco network devices with variables support? I have a lot of network devices with the typical configuration. But some of parametres at this devises can be different (IP octets, IPs at ACLs, names with numbers, etc). So is there some soft where I can give it some script with variables for all devices and it puts values for each device from some DB or file? Right now I have found only one soft with name "DeviceExpert" but is there more?
    Best Regards.

    Hi,
    You would need to contact Adobe Support via online chat.
                        http://www.adobe.com/support/chat/ivrchat.html
    Regards,
    Sharad

  • How to configure a shell and tube heat exchanger with Lab VIew to get data

    HiI
    In our undergraduate chemical engineering labboratory we want to configure our shell and tube heat exchanger  with a DAq and Lab VIEW to get information about the temperaure (of the cold fluid stream being heated), the pressure (of the steam on the shell side of the heat exchanger) and the flowrate (of the water being heated).
    Can anyone suggest thermocouples, pressure transducers and flowmeters to fit between the heat exchanger and the DAq?
    P.S. the heat exchanger is already fitted with thermometers, a pressure gauge and a rotameter but we don't know how to connect these hardware to the DAq
    Solved!
    Go to Solution.

    It sounds like you have enough information to pick out appropriate sensors, you just need to do the research. I would start looking through the Omega catalog, or give them a call - they're usually helpful. I can't take the time to spec out parts for you - that would be a lot of time spent on someone else's project. Most pressure sensors put out either a 4-20mA or 0-5V signal, either of which you can read through an analog input on a DAQ; measuring a 4-20mA signal requires a resistor to convert to voltage. Most of the NI DAQ boards can read a thermocouple on an analog input, but make sure that your hardware does support reading thermocouples. For accurate readings, use a device that has built-in cold junction compensation - for example, the SCB-68 connector block - and for the most accurate readings, get a board specifically designed for temperature measurement.
    For the flow measurement, a standard, simple solution is an orifice plate. You put a differential pressure transducer across it, look up the appropriate equations, and use them to calculate the flow rate given the density of the fluid (which you'll be able to calculate from the pressure and temperature, since steam tables are widely available). There are other differential pressure devices available as well - at a previous job we used a V-Cone from McCrometer. If you call them they'll spec one for you - but get an approximate cost first to make sure it's within your budget.

  • HT203200 Have deleted temp video, configured anti spam and firewall, and one specific video keeps giving me an error. Just tried downloading a previous episode of the show and it worked just fine. Always sunny in philly "Charlie rules the world" anyone el

    Have deleted temp video, configured anti spam and firewall, and one specific video keeps giving me an error. Just tried downloading a previous episode of the show and it worked just fine. Always sunny in philly "Charlie rules the world" anyone else??

    Have deleted temp video, configured anti spam and firewall, and one specific video keeps giving me an error. Just tried downloading a previous episode of the show and it worked just fine. Always sunny in philly "Charlie rules the world" anyone else??

  • How to configure sales forcast and assign marketing budget

    how to configure sales forcast and assign marketing budget

    Hi,
    As per my knowledge i am telling forecasting is done by Historical Data { MM & PP Module }
    when you collect the data based that we have to plan every month how much you want to procure the raw material etc..,
    that should be entered in the material master under "Forecasting" tab there we have to maintain monthly wise forecasting values
    i think it should get some idea if i wrong please clarify
    Regards,
    Prasanna

  • Why won't my iPod let me download anything? Ever since I downloaded iOS6 awhile ago it was acting up I had to erase my whole iPod now every time I hit download on an app it keeps saying I must agree to knew terms and policies every time I hit download.

    Why can I not download apps on my iPod? I had to erase the memory now it keeps saying I have to agree to new terms and policies but it won't download that will just keep popping up.Why won't my iPod let me download anything? Ever since I downloaded iOS6 awhile ago it was acting up I had to erase my whole iPod now every time I hit download on an app it keeps saying I must agree to knew terms and policies every time I hit download.

    I'd like to know who Marlene is....oh wait, it was a mixup.
    I suspect these posts will be deleted.
    It's every software company's answer to everything - upgrade to the latest version.
    And for good reason, the bugs they know about get fixed, while introducing new ones. Not on purpose, of course, it just happens.

  • I write digital port by 'DAQmx Configure Logging.vi​' and receive TDMS file with 8 boolean channels. How can I write to 1 integer channel?

    Hello!
    I want to write 1 digital port from PXI-6536 with streaming to TDMS file.
    I'm writing by 'DAQmx Configure Logging.vi' and become TDMS file with 8 boolean channels.
    How can I write to 1integer channel?
    Attachments:
    1.JPG ‏27 KB

    Hey Atrina,
    The actual data stored on disk is just the raw data (that is, a byte per sample in your case).  It's really just a matter of how that data is being represented in LabVIEW whenever you read back the TDMS file.
    I'm not sure if there is a better way to do this, but here is a way to accomplish what you're wanting:
    Read back the TDMS file as a digital waveform.  Then there's a conversion function in LabVIEW called DWDT Digital to Binary.  This function will convert that set of digital channels into the "port format" that you're wanting.  I've attached an example of what I mean.
    Note: When looking at this VI, there are a few things that the downgrade process did to the VI that I would not recommend for these TDMS files.  It added a 1.0 constant on the TDMS Open function, and it set "disable buffering" on the TDMS Open function to false; you can get rid of both of those constants.
    Message Edited by AndrewMc on 01-27-2010 11:21 AM
    Thanks,
    Andy McRorie
    NI R&D
    Attachments:
    digitalconvert.vi ‏13 KB

Maybe you are looking for