Is a .msi download available for bulk installs of flash and reader?

looking for .msi download

You need to apply for a distribution license
Flash Player: http://www.adobe.com/products/players/flash-player-distribution.html
Adobe Reader: http://www.adobe.com/products/reader/distribution.html
This will take some time to get approved; in the meantime you can download the MSI installers directly
Flash Player ActiveX: http://download.macromedia.com/get/flashplayer/current/licensing/win/install_flash_player_ 11_active_x.msi
Flash Player plugin: http://download.macromedia.com/get/flashplayer/current/licensing/win/install_flash_player_ 11_plugin.msi
Adobe Reader (English version): http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/AdbeRdr11000_en_US.msi

Similar Messages

  • HT1926 I have a French computer running on 32 bits instead of 64 (Vista). Reinstalled several times iTunes but keep on having failure 42110!! No download available for 32 bits????

    I have a French computer running on 32 bits instead of 64 (Vista).
    Reinstalled several times the latest iTunes but keep on having failure 42110!!
    No download available for 32 bits???? This is more an Apple support question!!

    Try this user tip:
    https://discussions.apple.com/docs/DOC-4831
    Hope that helps.
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • I have lost my mail application on the dock and in the application folder. Is a download available for osx 10.6?

    I have lost my mail application on the dock and in the application folder. Is a download available for osx 10.6?

    Possibly installing the big 10.5.8 Combo will bring it back, but first...
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    1058 Combo Update, 10.5.8...
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    Repair Permissions afterwords, reboot.

  • Safari Download Available for IMAC OS9.0.x?

    I have an older version of Internet Explorer. When attempting to download a new version of the Browser, it referred me to Safari as of Jan 06. Is Safari download available for my IMAC 0S 9.0.4?

    Hello iMac Lady,
    No, I'm afraid the earliest version of Safari was only available for OS 10.2.x.
    This macslash article mentions a few alternatives that are available for OS9 however:
    http://macslash.org/article.pl?sid=04/06/19/148223

  • ERROR: The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used

    As the title indicates, I'm having this error during installation. It occurs when I try to install
    the "Management Studio" part of the program. I've tried a bunch of things like
    copying to hard drive and installing, but to no avail. To isolate the problem, i've even tried removing Reporting services, since at the time of failure it seems to be trying to install/configure the Microsoft.Reporting Services dll.
    Additionally, I have SQL Express installed (installed it separately, not as part of the SQL 2005 DVD), VS 2005, .NET Framework 2.0, SQL Management Studio Express CTP. Could the Management Studio Express be causing a problem?
    Please note:
    Although the error is about missing / corrupt Sql.cab, I have searched the entire dvd for the said file, but there is no file called Sql.cab on the dvd. Am I missing something?
    Any solution would be greatly appreciated.
    TIA

    I was installing SQLServer2014_Developer which I had just purchased as a 64bit iso download to VirtualBox Windows_10_64bit Instance that i had just created.
    I got the following error about 90% through the SQLServer2014_Developer install:
    >>> ===================================================================
    >>> SQL Server 2014
    >>> ===================================================================
    >>> TITLE: Microsoft SQL Server 2014 Setup
    >>> ------------------------------
    >>> The following error has occurred:
    >>> The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used.
    >>> This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
    >>> For help, click:
    >>> h t t p ://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xDF039760%25401201%25401
    >>> ------------------------------
    A quick rerun of failed SQLServer2014_Developer install just for the Management_Tools and review of the SQLServer2014_Developer install logs
      confirmed error still prelevant:
    C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\...
    >>> ...
    >>> Detailed results:
    >>>   Feature:                       Management Tools - Complete
    >>>   Status:                        Failed: see logs for details
    >>>   Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
    >>>   Next Step:                     Use the following information to resolve the error, and then try the setup process again.
    >>>   Component name:                SQL Server Management Services
    >>>   Component error code:          1335
    >>>   Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150206_223659\sql_ssms_Cpu64_1.log
    >>>   Error description:             The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading
    from the CD-ROM, or a problem with this package.
    >>>   Error help link:               h t t p ://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40InstallFiles%401335
    >>>
    >>>   Feature:                       Management Tools - Basic
    >>>   Status:                        Failed: see logs for details
    >>>   Reason for failure:            An error occurred during the setup process of the feature.
    >>>   Next Step:                     Use the following information to resolve the error, and then try the setup process again.
    >>>   Component name:                SQL Server Management Services
    >>>   Component error code:          1335
    >>>   Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150206_223659\sql_ssms_Cpu64_1.log
    >>>   Error description:             The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading
    from the CD-ROM, or a problem with this package.
    >>>   Error help link:               h t t p ://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40InstallFiles%401335
    >>> ...
    Reading though the many Google hits going way back AD-2000/AD-2006/AD-2011/AD-2014 for various installs including SQLserver_2008/2012 etc
    I noted that in the main there were x2 common themes.
    1. Problem with corruption the original download.
    --- Although I had not run the download checksum
    --- I had previously just installed SQLServer2014_Developer successfully, so at the minute, I was confident downloads were ok.
    --- Many hits mentioned this 'Sql.cab' file and 90% of the install had been successfull -
    --- I figured the chances of us all having corruption of this one files were agaianst the odds and
    ---   probably re-downloading it would not fix this - but I kicked a re-download off anyhow .
    While it was running ...
    2. Network issue when installing - some of the hits asked if could be related to Virtual drives.
    --- This struck a chord
    --- I had downloaded the SQLServer2014 .iso to my host PC and then copied it onto one OneDrive so I could access it within the VirtualBox_Windows_10.
    --- From within the VirtualBox_Windows_10 I had then used SetupVirtualCloneDrive5450.exe to mount the OneDrive SQLServer2014 .iso and then autorun the install.
    What worked for me ...
    --- I decided to
    --- 1. Copy the same SQLServer2014 .iso that had failed to install x2 from OneDrive to the c:\ root of the VirtualBox_Windows_10.
    --- 2. Remount the same SQLServer2014 .iso from c:\ again using SetupVirtualCloneDrive5450.exe.
    --- 3. Re-run the SQLServer2014 install using the repair mode.
    This time the [Maintenance] [Repair] install completed with all elements showing installed successfully.
    Hope this helps
    Andy

  • Error: the cabinet file required for this installation is corrupt and cannot be used.

    Hi, ive recently just built a brand new computer and purchased windows 7 64 bit. the system runs fine except for the fact that i cannot install any games (these include command and conquer 4, red alert 3 and sims 3. i go to install and partway through it stops with a message saying:
     "the cabinet file 'name.cab' required for this installation is corrupt and cannot be used. this could indicate a network error, an error reading from the CD ROM, or a problem with this package."
    At first i suspectd a faulty cd rom drive, but the same thing happend wen i tried it with another drive. i know the disks are fine because theyr new. iv searced online and tried things such as disabling the antivirus, going into command prompt and deleting the .....\SQMClient\DisabledSessions as administrator and anything else that was recommended, but it still cant seem to like cabinet files (btw when the installation stops it doesnt always stop on the same .cab as a previous attempt, sometimes it gets further through the installation than others). they install fine on other computes with windows 7 64bit.
    Any help is appreciated! Thanx

    Hi Dazattack, I suggest you check the following KB article first:
    Error message during Office 2000 or Office XP installation: "Error 1335 - Cannot Copy Cab File Office1.cab"
    http://support.microsoft.com/kb/314810
    Note: Though it's for Office, some steps in the article can still be used in such scenario.
    Meanwhile, can you install other applications that downloaded from the Internet ?
    Sean Zhu - MSFT

  • Firefox is available for Android phones (2.0 and above) / LG ALLY?

    Firefox is available for Android phones (2.0 and above)...
    Have you tested it on LG ALLY?

    See the link to '''supported devices '''on this page: http://www.mozilla.com/en-US/mobile/download/

  • I bought a pdf book last year and had no problem reading it for a few months then all of a sudden I could no longer open it and to this day. Any other pdf download off internet I can still open and read, except for that particular book. Operating system i

    I bought a pdf book last year and had no problem reading it for a few months then all of a sudden I could no longer open it and to this day. Any other pdf download off internet I can still open and read, except for that particular book. Operating system is Windows 7 Home Premium, Adobe Reader XI 11.0.07.  When trying to open file I get msg "You did'nt login or your session has expired. Please log in to read this document for the first time". (Like I said I have read it before). So I log in but that prompts me to give the name of the file I want to export or convert to Word or something else, which is not what I want to do of course. I have not purchased any service from Adobe or Acrobat as I only need to read. Thanks for your help..

    Thank you for your reply. Operating system is Windows 7 Home Premium, Adobe Reader XI 11.0.07.  When trying to open file I get msg "You did'nt login or your session has expired. Please log in to read this document for the first time". (Like I said I have read it before). So I log in but that prompts me to give the name of the file I want to export or convert to Word or something else, which is not what I want to do of course. I have not purchased any service from Adobe or Acrobat as I only need to read. Thanks for your help.

  • Download page for trial version of Photoshop and Lightroom Mac OS 10.6.8

    Where can I find the download page for trial versions of Lightroom and Photoshop for Mac OS 10.6.8?
    It's so hard that Adobe has no contact form, no way I can see to contact them. The help is not helpful to me, it's more like an FAQ. So I'd also be interested in knowing how their customer support is from anyone who has had to use it. They don't have any obvious way to contact them for pre-sales support. When I see that I get suspicious that you will get no help once you hand your money over.

    Hi Wave.watcher.
    Welcome to Adobe Forums.
    We apologize for the inconvenience caused to you.
    Since you are using Mac 10.6.8 you cannot use the CC version of Photoshop
    so CS6 version of Photoshop would be apt for you.
    Please use the below link
    http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
    Link for lightroom 4
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5392
    Thanks

  • I just downloaded Java for OS X 2014-001 and my Epson Workforce 630 printer is not recognized? Any thoughts?

    I just downloaded Java for OS X 2014-001 and my printer is not recognized. I use an Epson Workforce 630. Has anyone had similar problems?

    Hi there wildwatercolors,
    I would recommend taking a look at the printer troubleshooting steps found in the article below. 
    Troubleshooting printer issues in OS X
    -Griff W.

  • I was downloading updates for ipod touch 2nd gen and twice when I was to processing files stage it clicked off. There was no message on whether it was done or what I was to do next. I needed to reset the ipod. Now what do I do?

    I was downloading updates for Ipod touch 2nd gen and when the process was to the processing files point the screen changed and I wasn't given any idea as to whether the process was complete or not and if it was what was to be done next. I needed to reset the Ipod and now I am wondering what to do . Spend another Hour downloading and whatever amount on processing files and end up where I am now . Whats the next step in finding out what to do? This was the second attempt to do this with the first try happening the same except I am not sure how long the processing files part was.. Any suggestions as to what to try will be greatly appreciated.. Thanks

    Likely a batter problem since high temperatures destroy a battery.  I wold make an appointment at the Genius Bar of an Apple store to see what they say.  It is free except for your time.

  • My downloaded apps are not opening, they flash and then shut down. This hapened after i upgraded to the 5.0

    my downloaded apps are not opening, they flash and then shut down. This hapened after i upgraded to the 5.0. How do i fix it!? I've tried everything

    You need to resync you applications or redownload them for free via app store. They may be read by your phone, but they are really not there. Re downloading will fix this.

  • No Licensing Website download available for Acrobat 9 Pro Extended

    Although my company has a licence listed, the Adobe LWS site does not contain a downloadable version of the product for re-install on a user's machine. Adobe support says this is because the product is no longer supported and that I should ask if anyone on this forum has a version for download. The retail version downloads available online do not accept our serial number. Thanks!

    Mark.o if the download is not able to be enabled then you would need to obtain a volume license version of the installation files.  I am not aware of any other locations than https://licensing.adobe.com/.  Do you have a case number from your interaction with our support team that I can reference?

  • No software downloads available for Satellite A100-165

    I need to download software for my A100-165(PSAA9E-OOVOOHFR) and it is not listed in the laptops series?

    I really dont know what your problem is but if I search on Toshiba for Satellite A100 PSAA9E I have founded all drivers and tools.
    So try it again, maybe you searched on the wrong website:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers

  • Is there a download available for Firefox on Motorola Razr phone?

    We recently switch to a new phone, the Motorola Razr (WT912), but couldn't find it listed under your list of supported devices under Android.

    Hi,
    Is this the new DROID Razr? If you can provide me with the model or series that would help. If your phone meets the minimum requirements, it might support Firefox mobile, and we just haven't tested it yet. The minimum requirements are here:
    Firefox is available for Android 2.1 or higher. It requires:
    A phone with an ARMv7 processor.
    Approximately 17MB internal or SD storage. It runs best on devices with at least 512MB of RAM.
    You can also go to the android market web site on your laptop (https://market.android.com/details?id=org.mozilla.firefox) and when you log in in the upper-right with your google account it will indicate, based on your registration with google when you bought the phone, if Firefox is compatible and from there, you can install Firefox to your phone.
    -Michelle

Maybe you are looking for

  • How do I connect my MacBook Pro to a monitor or tv via a Thunderbolt to hdmi cable?

    I have an early 2011 model MacBook Pro 15in. I purchased this cord to use the Macbook with my tv and my monitor. I've tried the detect display option, I've also tried different hdmi ports on my tv but it won't display for whatever reason. http://www.

  • VideoDisplay control

    According to the Developers guide in flexbuilder 2 you can use the videodisplay control to stream video. The code they show is this: <?xml version="1.0"?> <!-- controls\videodisplay\VideoDisplayCamera.mxml --> <mx:Application xmlns:mx=" http://www.ad

  • Screen enhancment for PR,PO and MIGO

    Hi experts, I have added long material text(more than 40 characters) into material master using screen enhancement , now i want to add this into Purchase Requisition , Purchase order  and MIGO . I have added LONG TEXT into PR & PO using screen enhanc

  • Manual PR should be checked MRP Parameters

    Hi Experts I have set MRP parameters Re Order Level, Minimum Lot size and Maximum Stock parameter for a Material. Now I can generate PR automatically but my management requirement is that we should be able to create manual PR also and i know that we

  • Book operations disabled - missing plug-in

    I am working with CS4  (skipped CS3 entirely).  I am trying to create an index from a book and get the message that book operations are disabled due to a missing plug-in.  The plug in is contactcs.pln, which was probably intalled way back in InDesign