Is a new logic board revision confirmed? How to recognize it?

I have seen a lot of talk about a new logic board, and some sort of photo of a paper someone got describing that it required 1.0.4.6...
Is this really a new revision (which then fixes the whine and heat)?
How do you recognize it? I mean, does it have a name, or what do I tell the tech guys at my local service center here in Sweden?
Apple surely must have some stock of spare older logic boards left, and I really want to make sure that I won't receive one of those when I take my MBP in for service.

If your computer is still whining, then yes, you may absolutely be able to get your logic board replaced again. Your logic board was replaced once on March 29th but, as I now too can confirm, Apple released an even newer, revised logic board for the MacBook Pros during the last week of June.
If you are still experiencing the whine, call up AppleCare and simply be persistent and ask for a logic board replacement. If they say they don't know what you're talking about, simply tell them to look it up, as this is what I had to do. Once my Product Specialist sent an "escalation" to Engineering, he called me back within 2 business days and was able to directly confirm that there was a new logic board released recently, and we arranged to have my MBP sent in. And don't worry that your logic board was already replaced once. Mine too was replaced even more recently (end of May), but being as though this revision is very recent, it didn't matter. Just be polite but insist on getting a new logic board.
I however am still waiting on its return to verify whether or not my whine is gone. Turnaround time was amazing; MBP shipped overnight (over Thursday night, that is) and arrived at the repair depot yesterday morning and is on its way back to me as we speak! I should be able to report back on Monday afternoon...

Similar Messages

New logic board, and new display, but now completely dead.

Hi guys,
I've got an iBook G3, running 10.3.9.
In December 2006, the logic board failed, so I bought a MacBook, because I didn't have time to be offline waiting weeks for Apple to replace the iBook's logic board.
After much badgering, Apple reluctantly replaced the iBook's logic board under the extended warranty program.
While the iBook was with the Apple repair store, they replaced the display for new as well, even though I didn't ask them to, and even though I wasn't charged for it.
I presume that was because the store discovered that the display was duff enough to be replaced under another extended warranty program.
When I got the "repaired" unit home, with a brand new logic board, and a brand new display, I turned it on, and it seemed to be working fine, so I turned it off, and continued to use my MacBook.
A few weeks ago, the second logic board on my MacBook failed (another long horror story entirely), so I began using the iBook for the first time since it had been "repaired" some six months earlier.
Almost immediately, the iBook began exhibiting a major problem, specifically that I'd be typing away, and suddenly the display would go black.
I could just about see the icons and documents on the screen, but the unit was unusable.
So I pulled restarts, full shutdowns, disk utility, zapped the PRAM, etc, all to no avail.
It seemed to be an intermittent problem.
For example, sometimes, from a cold start, the unit would work for two or three hours until the display went black.
Other times, I'd pull a cold start, and it would go straight to the black display.
By chance, I discovered that if I gave the iBook a shake, the display would come back on.
But then it would go black after a second or two.
And then with another shake, it would come back on for a second or two.
And then it would go black after a second or two.
And then with another shake, it would come back on, sometimes for a couple of hours at a time.
So I figured that it must be a cable which, during the installation of the logic board, and/or the new display, wasn't seated correctly by the technician.
I phoned Apple, and told them about it.
They said that because I had reported the issue beyond 90 days since the logic board had been replaced, it was no longer Apple's problem.
I explained to Apple that I hadn't used the iBook for six months, because I had a MacBook.
After much badgering, Apple has agreed to replace the logic board if it's faulty.
However, Apple has refused to replace the NEW display, even if that's also faulty.
Apple is also insisting that I have to pay all the labor charges.
Meanwhile, I've noticed that the iBook is now incredibly hot.
I mean, the MacBook is infamous for running hot, but this "repaired" iBook makes my MacBook feel like a block of ice by comparison.
I don't remember the iBook running so extremely hot before the "repair."
Which has made me notice that during the last few weeks, I've never heard the iBook's fan come on.
I presume that an iBook has a fan ?
Please confirm.
Therefore, another loose cable ?
Today, the display went black again, as usual.
So I gave the iBook a shake.
But this time, nothing happened.
No display.
No fan.
No hard drive spinning.
Just silent and dead.
What do you reckon, guys ?
Duff logic board ?
And/or duff display ?
And/or duff fan ?
And/or duff cabling by the technician ?
As far as I'm concerned, I don't see why I should have to pay for yet another repair, to correct hardware and/or workmanship which was so bad that after only three weeks of ACTUAL use since the "repair", the unit is now completely dead.
All opinions and advice gratefully received.
With thanks and best wishes,
Michael
London, England

Hi S,
Many thanks for your helpful and swift response.
I agree with you regarding the likelihood that these problems would have surfaced immediately during normal usage, regardless of how much or little time had passed since the repair.
As advised, I will inform Apple Customer Relations UK about the new developments.
Indeed, when I resubmit the iBook, I'll include a print-out of this discussion.
I agree with you about the fan.
Prior to the failure of the first logic board, I ran that iBook for YEARS, without noticing any heat issue.
Indeed, if there had been such incredible heat, then I'd have searched these discussion boards, and reported it to Apple HQ.
Therefore, the astonishing heat is definitely a new development since the "repair."
Consequently, I take on board your comments about the lack of a working fan since the "repair", which I shall also mention to Apple HQ.
As for running the Apple Hardware Test, the unit is completely dead.
The power cable is green, but the unit is now completely silent and black.
I also note your suggestions regarding the cable which connects the display to the rest of the unit, which I shall also mention to Apple HQ.
No repair sheet was ever given to me by the Apple Repair Centre (ARC).
Indeed, no receipt was ever given to me when I delivered the unit to the ARC, nor was any paperwork ever given to me when I collected the unit from the ARC.
However, Apple HQ can see on their screen that the logic board and display were both replaced for new by the ARC.
What else was and wasn't done by the ARC is a mystery.
I'll phone the ARC and ask for copies of any and all paperwork, so that I can submit it all to Apple HQ, which I note is your recommended option, rather than returning the unit to the ARC.
However, the complicating factor is that with the exception of the logic board, it is my understanding that Apple is denying any liability on any part of the "repaired" unit, including the brand new display.
If I understand Apple HQ correctly, they're now saying that all other hardware and labor costs will be mine.
I'm sure I could buy a WORKING second-hand iBook G3 for the same price as a repair, if not cheaper.
Therefore, perhaps I should return the unit to the ARC, and give them the opportunity to correct their previous workmanship, at their OWN cost.
Because as far as I'm concerned, the ARC had two customers during the repair: Apple and the end-user, as evidenced by the fact that the ARC has invoiced its first customer Apple for workmanship which was clearly not up to Apple's own standards, and the ARC has then delivered the unit to its second customer, the end-user.
In addition, regardless of Apple's 90 day warranty on repaired hardware, UK law includes the Sale of Goods Act 1979, and other relevant legislation: http://www.dti.gov.uk/consumers/fact-sheets/page38311.html
Furthermore, if the ARC is completely unhelpful, I could jump all over them, by writing to Apple HQ, with cc's to the UK editions of MacWorld, MacFormat, and MacUser magazines.
As advised, if the unit goes to Apple HQ, I will suggest that the unit is looked at carefully during disassembly, to see if errors were made during the ARC "repair."
I'm always polite when on the phone to Apple, because I love the company so much.
Indeed, even though during the last twelve months, I've been having very bad luck with the iBook, as well as with a MacBook which has exhibited so many problems that Apple has now agreed to replace old for new, I still love my Mac.
And joy, sweet joy, I've just seen on the TNT courier's tracker website, that my replacement MacBook, built by Apple in Singapore, then flown to Arnhem in Germany, then flown to Northampton UK, then delivered to Heathrow UK, left the Heathrow depot 30 minutes ago, for delivery to the customer.
And the sun is shining.
Thank you again for all your kind and wise advice.
With best wishes,
Michael
London, England

Keys 5-9 no longer work after water damage. Do I need a new logic board?

I had the smallest amount of water on my fingers when I typed something on my keyboard and now keys 5-9 no longer work. Will I need a whole new logic board for this? I've been into two Apple stores and both say I need to book an appointment online. I've been online and tried to book in at three different Apole stores within my area and I just get 'there are no slots available' how am I supposed to get this fixed if I can't book a session to see some!?! Sort it out Apply, it's why your products cost so bl**dy much isn't it!?

thanks, but I really don't think its the logic board since I can still plug in head phones and i can hear movies, etc.
also when i don't have my magicJack plugged in to make calls they now give you a magictalk dial pad to make calls and when i plug in the headphones again i can talk through the speakers and be heard and I can hear them too. Is there something I can used to maybe pull out the connection. I think it thinks the headphones are plugged in all the time.

New logic board and network connection problems

My late 2007 MBP just had a new logic board installed. I have home and work wireless networks that are configured to connect automatically. This always worked flawlessly in the past. My MBP would find the network, connect and all was well. Since I've had the new logic board I'm having issues. The wireless network will be detected but an IP address is not assigned so I can't get on the network or internet. Both my home and work networks were set to assign a specific IP address to my computer. The MAC address detected by the router is correct, at least according to System Preferences.
The only way I can connect is to disable the firewall (Allow all incoming connections). When I do this I connect immediately to the network and everything works as normal. I can even turn the firewall back on and everything will be fine, that is until I leave work and turn the computer on at home. Then I have to go through this again. And then again when I go to work in the morning. I've tried deleting my router profile and resetting from scratch, deleting the network profiles in System Preferences and re-detecting. I don't know what else to try. It's an annoying problem.
Any suggestions?
Thanks.
Kevin

I think I have it fixed. One of the solutions I read about had to do with the 10.5.7 upgrade. I have always installed the smaller upgrades, not the larger "combo" upgrades. One tip suggested installing the full combo upgrade because, among other things, it re-creates two specific files that control how the computer interacts with the network. I installed the combo upgrade last Friday and connected without difficulty to the network at my office this morning. If I connect just as easily when I get home tonight I will consider the problem solved.
Cheers!
Kevin

Time Machine Restore After New Logic Board

Older iMac (2009) had hard drive and logic board replaced. Running latest system (10.10.2) before and after logic board replacement.
When attempting to restore from a Time Machine backup made prior to the new logic board, although the iMac sees the Time Capsule and the "Data" file, attempts to proceed with the restore are met with error message "There was a problem connecting to the server [name of Time Capsule] - contact your administrator."
Any experience with this issue? Anybody successfully perform a restore following a new logic board?
Thanks very much.

I would refer you to visit Pondini's Time Machine FAQ for help with Time Machine and full system restore. It also provides instruction on how to restore a backup from another system or Time Machine backup drive.

Imac G5 needs new logic board

Hi,
My imac G5 was revving up quite a bit and acted like I was downloading something all the time. I thought it might just need the fans to be cleaned but I took it into the genius bar and was told that they guy "thinks" that I need a new logic board but isn't positive and would I like to look at the new imacs. ( I love looking at the new imacs but it's not in my budget). He said it would cost close to $800.00 to repair my imac. I edit video on it and it's also become the family computer. Any suggestions? Do I put the money into replacing the logic board? Do I put money into expanding the memory on my macbook pro that only has 2 gb of memory?

Has it been shutting down unexpectedly?
There was a repair extension program for some of these iMacs which suffered from defective capacitors on the Logic Board and the Power Supply. It's been closed since Dec. 08, but I've heard of people appealing to Apple Customer Service anyway and getting the repairs covered. First you should open the computer and determine if the capacitors on the Logic Board are swelling or leaking at all. If so, you might be able to convince Apple to do the repairs. 1-800-275-2273. If at first you get turned down, ask to speak to a higher level rep.
Tell them how unfair you think it is that those who had the problem before the program closed were covered, and it was just your bad luck that your computer lasted a bit longer. You can also say that had you opened it up earlier, you probably would have seen the bad capacitor issue developing before the program closed. They are numerous little cylinders about 3/4 inch tall. The tops should be perfectly flat. No brownish gunk. Inspect it very carefully.You won't be able to look inside the Power Supply easily, though. If your iMac is not an iSight, it's very easy to open up. Just three screws at the bottom. Have a look here for illustrated instructions for your model. If it is an iSight, probably best not to try; a bit too complicated. Or you might just call the repair service and ask exactly why they thought it needed a new Logic Board. Did they see bad capacitors?
http://www.ifixit.com/blog/?p=1892
These were the covered serial #'s
* iMac G5 Repair Extension Program for
Video and Power Issues - September 2005
Computer model: iMac G5, 17-inch and 20-inch
iMac Serial number range, first 5 digits:
W8435 - W8522 or
QP435 - QP522 or
CK435 - CK522 or
YD435 - YD522
Message was edited by: WZZZ

Facetime issue - after installing a new logic board due to liquid damage.

I installed a new logic board this week.. after installing the os x operation system and then upgrading it to mavericks and i used migration assistant to load my backuped user from an external disk.
I tried to log in using my apple id ( which is verified) it couldn't log in beacuse "could not sign in. please check your network connection and try again"
and i did all the updates of mavericks. i tried also before installing mavericks i thougt upgrading will fix it..
i saw on forums that i should add 2 DNS's (8888 and 8844) didn't work.
i tried connection to my phones hotspot - didn't work.
i also went to the firewall thing to allow it recieve cennections..
pleassee help!!
is there a way to reinstall the facetime or something?!?!?!

My problem solved could possiblly be your solution: Check to make sure your system serial number is being read by your logic baord. If the tech forgot to reenter the serial number, it's a known issue for Facetime and Messages (apparantly not know enough yet though, no tech bulliten exists on the topic).
I spent several days trouble shooting my inablility to login to my account with Facetime or Messages (other cloud services worked) after upgrading to Mavericks. I went as far as doing a clean install on my hard drive after spending two hours with a baffled mac tech in a retail store and many hours searching the message boards.
I have never had a logic board (or hard drive) replaced on my Macbook Air, but somehow after the Mavericks update the logic board stopped reading the serial number on my system. It took a call to Apple and a ticket opened to engineering to figure this out (after I uploaded log files).
They were puzzled I experienced this without a logic board replacement, but it was indeed the root cause of the facetime and messages apps failing to log in, and said they'd run in to it recently more than once.
Wish I knew how to post this unbiquitously across all the boards for folks to troubleshoot by simply looking at their system info in the Apple menu; Apple scheduled an appointment for me at an Apple genius bar and it was fixed in fifteen minutes.

Can applecare be extended with new logic board

My Imac is with apple having a new logic board fitted for the second time and before that they replaced the computer. Since my cover runs out in August 09 has apple been known to extend the cover when replacing the logic boards, if so how do you go about it.

If your iMac is still less than a year old, you can purchase the extended AppleCare out-of-pocket. If you already have an extended warranty, then you can no longer extend it any further.
Technically, replacement parts (such as a logic board) can have longer warranties than the rest of the computer. This is because replacement parts are covered by either a 90-day warranty, or the remainder of the limited/extended warranty, whichever is longer. This means that if you had a logic board installed on the last day of your warranty, the logic board would still be under warranty for another three months even after the computer's warranty had expired.

Is there a fix for a dead ethernet port besides a new logic board?

My ethernet port went dead on my IMac. I unplugged the ethernet cable and plugged it into my laptop and it worked instantly. I am still able to connect wirelessly. I bought an apple USB to Ethernet converter and plugged it in. It worked for about 3 days and then it went dead. Once again I was able to unplug the ethernet cable, plug it into my laptop and instantly had a connection. Is there a fix for a dead ethernet port besides a new logic board and if not how do I figure out which logic board I need?
Thanks
Step

This problem baffled me. I kept getting the "ethernet cable unplugged" error after testing my cables good. Was abut to write it off as port gone bad when I found this thread.
The YouTube video reference above fixed my problem. (http://www.youtube.com/watch?v=u1P6X87qArs)
Basically go to SETTINGS/NETWORK. Then highlight your ETHERNET port and click the ADVANCED button. From there click the HARDWARE tab.
Set
CONFIGURE to MANUALLY
SPEED to whatever your ethernet speed is, in my case 1000baseT
DUPLEX - FULL DUPLEX, FLOW CONTROL
Leave MTU at Standard
Hit OK.
Then don't forget to hit APPLY. I didn't do this the first couple of times assuming hitting OK applied these settings. You gotta hit APPLY.
In about two seconds, my Ethernet connected again.
I went back and reset it to AUTOMATIC just to test and after doing so got the cable unplugged error again. So I am leaving it on manual and it's working.

New logic board, still boot problems with Turbo Fans

I bought a 2Ghz dual G5 from a guy on craigslist and he told me that the Geniuses at the Apple Store said it had a bad logic board. So I bought a brand new logic board from DVwarehouse.com, and installed it along with a new set of matched RAM from Crucial, a new HD, new PRAM battery, new video card and a new superdrive. The only thing original are the processors and power supply (and fans, of course).
When I start it up, after the chime it quickly goes into "turbo-fan mode", which I have read that means the Op Sys didn't load correctly. Many restarts later, I was able to reset the nvram in the Open Firmware, but that didn't seem to help at all. I also pressed the SMU button (according to Apple's directions), but that didn't help much either.
I've had a few successful boots, but always with the fans going full blast. I though that once I got Leopard loaded onto the HD, then it would calm down with a software update. But before I ever get that far, the G5 hangs. Sometimes the G5 will boot and access the HD but hangs soon after. Sometimes I can get it to boot off the Leopard DVD. But most of the time it just boots and sits there slowly spinning up the fans into turbo mode.
The few times it has booted to access the HD or DVD, the fans go turbo right away. Other times it will boot with a chime, but then it won't access the HD or DVD and I get noting on the display.
I should say that this behavior is almost identical to how it was acting before I replaced the logic board. But how can that be? It should be a new computer, unless the problem is in the CPUs. Is that very likely? How would I find out if the CPUs are bad?
I've been reading alot about the problems I'm having with this G5 and what I've been having seems to be very common. But I've run out of fixes. Is there anything I can do to fix this machine or is it just money down the drain?

my iMac 20" G5 experience since December 2004, even though I love this machine,it has gone through 3 power supply (661-3350) replacements and 3 logic board replacement since late 2004. Pretty crazy for a single machine but I still love it. The last logic board replacement did NOT fix my boot up problem, as I expected, and the genius finally agreed to replace the power supply and that fixed it. SO: My recommendation to you is "replaced the power supply" here is one place you can get one: http://www.dvwarehouse.com/Power-supply-180W-for-iMac-G5-20--100v-661-3350---614 -0353-----NEW-p-25613.html

Serial No. no longer shows in system profiler after new logic board..!

My Macbook had to go in to my Apple Service centre to get the random shutdown fault fixed. They fitted a new logic board and last night I noticed that the System Profiler no longer show the computers serial number. Instead it says "systemserialnumb" where before it listed the Macbooks serial number. Does anybody know whether this will affect my 3 year Applecare warranty as normally they check your machines warranty status by confirming the serial number? I have all the documents but would not normally carry them all if away from home.

I love this board..ask a question and someone always knows the answer..! Mort..thanks, at least now I know it has happened to other people and also that the serial number is also to be found under the battery which for repair and service purposes is good. I am a little surprised that the engineers don't routinely reset it at the time of repair though as it is one of the pretty relevant bits of information in the "about this computer" button.
thanks

Mac got new logic board

My mac had to get a new logic board. I can find my website in idisk public. I see the folder of my website. When I open Iweb my site does not appear.
How do i get Iweb to re-recognize my site?

See this Apple doc on How to back up MobileMe data. It says:
Any websites you have published with iWeb should still be available within iWeb. iWeb stores everything in a Domain file, normally located in the ~/Library/Application Support/iWeb folder (although it can be moved). If you no longer have this file, you can view your currently published pages and manually recreate them within iWeb, but there is no way to import published pages back into iWeb.
You can manually back up the Domain file, or use Backup to back it up.
By the way, for searching purposes it may be useful to know that an iWeb '06 Domain file is called "Domain.sites" and iWeb '08 & '09 Domain files are called "Domain.sites2" — although the “.sites” extension is usually invisible.
If you don't have a backup of your Domain file (e.g. via Time Machine), paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
http://iwebfaq.org/site/iWebBackupretrieve.html

Lost my registrations and my sites in iweb after new logic board was instal

I recently brought my MacBook Pro in to the Apple to store to check out why it wasn't starting up properly. I would hear a chime but the display wouldn't even light up. We tried an SMC and a PRAM reset. We tried plugging in an external monitor and reseating the ram. They had determined after 30 minutes at the genius bar that I must have a faulty logic board. Four days later I picked up my repaired notebook and everything was fine.
I then began noticing some very peculiar things. Saved settings seemed to be missing. My browsers cache was not as I had left it. My BootCamp Volume had gone back to a previous state prior to some applications being installed and even had a user account missing. So far, this didn't seem to be enough to make an issue of until tonight.
I went to open an application and it prompted me for my registration number. I've had this app installed for about 6 months now and never had an issue. Then I go to open iWeb and discover that all my sites and pages are missing. I haven't looked for them because they really aren't that important to me... but what if they were?!
Many settings and preferences are perfectly fine but I find it extremely hard to understand how coincidentally all of these other items crapped out immediately after a new logic board was installed. Is there any explanation for this at all? Is there any further testing or further info I can provide to get to the bottom of this?

Look in "About This Mac" in the  menu for the serial number. They probably didn't copy it to the new logic board. They can download software to do this from a website restricted to Apple service departments.

Where can i buy a NEW logic board for my macbook pro 2012?

My video card has recently failed, in this model video card is sticked to logic board.
Does anyone know where i can buy a NEW logic board? Its a Mid 2012 MacBook Pro

"Where" questions are more easily answered if you give your approximate location. Especially important if you live in the US because there is a low-cost repair option for which you can ask.
If you are out of warranty and you live in the US, the most cost-effective solution is a depot repair. Instead of fixing the computer in an Apple Store, it is sent to a central refurbishment center and they fix anything that's wrong (other than damage to the case and/or display) for a flat fee of around US$325. It takes about a working week but it is worth it. All the posts here from people who have availed themselves fo this option were glowing.

Kernel panic.. with new logic board

Hi,
So I recently replaced my logic board after trying EVERYTHING to fix a somewhat frequently occuring kernel panic. Now however.. it has happened again.
Does anyone have any idea what could be causing this? I honestly feel like I've tried everything. Could it be bad RAM? I've changed the hard drive, done a fresh OS X install (perhaps its something in my settings from migrating my old stuff back over?), new logic board.. reset PRAM, every suggestion I could find.
Here is the old discussion before I changed the logic board. https://discussions.apple.com/thread/3902490
Attached the latest crash log.
Interval Since Last Panic Report: 389295 sec
Panics Since Last Report:          2
Anonymous UUID:                    F57DA50B-3111-4118-A66E-A003634B4A5D
Sat Aug 4 20:34:26 2012
panic(cpu 1 caller 0xffffff80002c473a): Kernel trap at 0xffffff80002aaae2, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x000000000645e000, CR3: 0x000000002fb3d000, CR4: 0x0000000000000660
RAX: 0xffff80000668f000, RBX: 0xffffff801014ce80, RCX: 0xfffeffffffffffff, RDX: 0xffffff801014ce98
RSP: 0xffffff80e7e43200, RBP: 0xffffff80e7e43280, RSI: 0x0000000000000000, RDI: 0x00000000001a13f4
R8: 0x0000000000000000, R9: 0xffffff800cd25000, R10: 0x00000000001b2fff, R11: 0x0000000000000000
R12: 0x8000000000000000, R13: 0x0000000000000000, R14: 0xffffff801014ce80, R15: 0x000000000668f000
RFL: 0x0000000000010246, RIP: 0xffffff80002aaae2, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x000000000645e000, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80e7e42eb0 : 0xffffff8000220792
0xffffff80e7e42f30 : 0xffffff80002c473a
0xffffff80e7e430e0 : 0xffffff80002da0cd
0xffffff80e7e43100 : 0xffffff80002aaae2
0xffffff80e7e43280 : 0xffffff80002adbd4
0xffffff80e7e432a0 : 0xffffff800026740e
0xffffff80e7e432d0 : 0xffffff800026804b
0xffffff80e7e436d0 : 0xffffff8000268448
0xffffff80e7e43730 : 0xffffff8000571351
0xffffff80e7e43780 : 0xffffff80002ff905
0xffffff80e7e437d0 : 0xffffff80002ff59e
0xffffff80e7e43810 : 0xffffff8000301996
0xffffff80e7e438a0 : 0xffffff80004ddf0c
0xffffff80e7e43990 : 0xffffff80004fe325
0xffffff80e7e43ae0 : 0xffffff80005010d5
0xffffff80e7e43b40 : 0xffffff800031ccbd
0xffffff80e7e43bb0 : 0xffffff800030b9c8
0xffffff80e7e43da0 : 0xffffff800030bdad
0xffffff80e7e43f60 : 0xffffff80005ccfe8
0xffffff80e7e43fb0 : 0xffffff80002da5e9
BSD process name corresponding to current thread: Google Chrome
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: MacBookPro5,3 (Mac-F22587C8)
System uptime in nanoseconds: 21950465015381
last loaded kext at 21384906305176: com.apple.filesystems.msdosfs          1.7.1 (addr 0xffffff7f81322000, size 57344)
loaded kexts:
com.bresink.driver.BRESINKx86Monitoring          9.0
com.apple.filesystems.msdosfs          1.7.1
com.apple.driver.AppleUSBCDC          4.1.17
com.apple.filesystems.smbfs          1.7.2
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AGPM          100.12.42
com.apple.driver.AppleHDAHardwareConfigDriver          2.2.0f3
com.apple.driver.AppleHDA          2.2.0f3
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AppleMCCSControl          1.0.26
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.0.5f11
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d0
com.apple.driver.AppleLPC          1.5.8
com.apple.driver.AppleMikeyDriver          2.2.0f3
com.apple.driver.AppleMuxControl          3.0.16
com.apple.driver.AppleBacklight          170.1.9
com.apple.GeForce          7.1.8
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleSMCLMU          2.0.1d2
com.apple.driver.AppleUSBTCButtons          225.2
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.5f11
com.apple.driver.AppleUSBTCKeyEventDriver          225.2
com.apple.driver.AppleUSBTCKeyboard          225.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.driver.AppleIRController          312
com.apple.driver.AppleUSBCardReader          3.0.1
com.apple.iokit.SCSITaskUserClient          3.2.0
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCISerialATAPI          2.0.3
com.apple.iokit.IOAHCIBlockStorage          2.0.3
com.apple.driver.AppleFWOHCI          4.8.9
com.apple.driver.AirPort.Brcm4331          530.4.20
com.apple.driver.AppleUSBHub          4.5.0
com.apple.nvenet          2.0.17
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleAHCIPort          2.3.0
com.apple.driver.AppleUSBOHCI          4.4.5
com.apple.driver.AppleUSBEHCI          4.5.8
com.apple.driver.AppleEFINVRAM          1.5.0
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.6
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleSMBIOS          1.8
com.apple.driver.AppleACPIEC          1.5
com.apple.driver.AppleAPIC          1.5
com.apple.driver.AppleIntelCPUPowerManagementClient          193.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.3
com.apple.driver.AppleIntelCPUPowerManagement          193.0.0
com.apple.driver.DspFuncLib          2.2.0f3
com.apple.iokit.IOSurface          80.0.2
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.iokit.IOAudioFamily          1.8.6fc17
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.ApplePolicyControl          3.0.16
com.apple.driver.IOPlatformPluginLegacy          5.0.0d0
com.apple.driver.IOPlatformPluginFamily          5.1.0d17
com.apple.driver.AppleGraphicsControl          3.0.16
com.apple.driver.AppleBacklightExpert          1.0.3
com.apple.nvidia.nv50hal          7.1.8
com.apple.NVDAResman          7.1.8
com.apple.iokit.IONDRVSupport          2.3.2
com.apple.kext.triggers          1.0
com.apple.iokit.IOFireWireIP          2.2.4
com.apple.driver.AppleSMC          3.1.3d8
com.apple.driver.AppleHDAController          2.2.0f3
com.apple.iokit.IOGraphicsFamily          2.3.2
com.apple.iokit.IOHDAFamily          2.2.0f3
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleFileSystemDriver          13
com.apple.driver.AppleUSBBluetoothHCIController          4.0.5f11
com.apple.iokit.IOBluetoothFamily          4.0.5f11
com.apple.driver.AppleUSBMultitouch          227.1
com.apple.iokit.IOUSBHIDDriver          4.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.2.0
com.apple.iokit.IOUSBMassStorageClass          3.0.1
com.apple.driver.AppleUSBMergeNub          4.5.3
com.apple.driver.AppleUSBComposite          4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.0
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.7
com.apple.iokit.IOCDStorageFamily          1.7
com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.0
com.apple.iokit.IOFireWireFamily          4.4.5
com.apple.iokit.IO80211Family          420.3
com.apple.iokit.IOUSBUserClient          4.5.8
com.apple.iokit.IONetworkingFamily          2.1
com.apple.iokit.IOAHCIFamily          2.0.8
com.apple.iokit.IOUSBFamily          4.5.8
com.apple.driver.NVSMU          2.2.9
com.apple.driver.AppleEFIRuntime          1.5.0
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.5
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          331.6
com.apple.iokit.IOStorageFamily          1.7.1
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily          2.6.8
com.apple.iokit.IOACPIFamily          1.4
Model: MacBookPro5,3, BootROM MBP53.00AC.B03, 2 processors, Intel Core 2 Duo, 3.06 GHz, 8 GB, SMC 1.48f2
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x393930353432382D3031322E4130304C4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x393930353432382D3031322E4130304C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.198.4.20)
Bluetooth: Version 4.0.5f11, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: SAMSUNG HM501II, 500.11 GB
Serial ATA Device: MATSHITADVD-R   UJ-868
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x04600000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06110000 / 5
Any help at all or new fixes I could try would be greatly appreciated! Very frustrating!

Cheers - I've run Rember a few times and it hasn't come up with any errors, but I've heard it's not a 100% accurate test. Looks like that's the only thing left it could be!

Is a new logic board revision confirmed? How to recognize it?

Similar Messages

Maybe you are looking for