Is a power transformer required for use in other countries or can you just use a plug adapter?

I'm flying to France tomorrow and don't wan't to bring or buy anything unnecessary. I have heard that some laptops don't need additional transformers to work over seas(just a plug addapter). Do you need a transformer for HP laptops?

No you just need a plug adapter. The AC "brick" is designed to accept 110-240 volts of current coming in and still put out the correct power to the laptop.

Similar Messages

DVD+R DL - "failed to calibrate the power level required for this media"

For the first time since owning our MBP (almost a year) I have tried to burn DVD dual layer discs. I get the error message that says the "device failed to calibrate the power level required for this media"
I have searched the web and this discussion forum and see many people have the same situation.
I am simply trying to burn 7GB of data in the finder onto my disc.
I am running 10.5.2, and have tried both Fuji and Memorex discs with no success. I am a little ****** off since the discs aren't cheap...
Do I need to get my DVD burner replaced or is this a software / media issue?
Any help very much appreciated. (& the international settings tweak that worked for some did not work in my case.)

I found the fix to this problem. I tried the trick with changing the languages and it didn't work for me. After hearing the success stories from other people using the language trick I realized that calling apple and getting my superdrive replaced won't do the trick. My superdrive burns CD and 4.7Gb DVD without any problems but when I try to burn DL it shows the message "failed to calibrate". Here's the temporary solution to the problem (it worked for me)
Create a new account
Change the language to something other than English (I speak Russian so Russian worked for me).
I know that it may not work for some of you guys but give it a shot. Hopefully Apple will fix this software bug in the next update.

Does it mandatory to use Delta/WYE 3phase PDU for CRS1 8 slot deployment? Can we just use default single phase AC power-shelves?

does it mandatory to use Delta/WYE 3phase PDU for CRS1 8 slot deployment? Can we just use default single phase AC power-shelves?

The fixed power supplies (legacy / zone based system) require 3-phase AC-Delta/WYE.
The modular power supplies do not use a zone based system and require a single phase. You can order a CRS PDU to convert 3-phase AC input (from power source) to single-phase AC input for the power shelf.
HTH,
Sam

Is N55-8P-SSK9 required for using native FC ports on N55-M8P8FP

Hello,
Could you tell me if Storage Services license (N55-8P-SSK9) required for using native FC ports on N55-M8P8FP (non-UP ports module - 8 ports 1/10G + 8 ports 8/4/2/1G FC) ?
thank you

Hello,
Could you tell me if Storage Services license (N55-8P-SSK9) required for using native FC ports on N55-M8P8FP (non-UP ports module - 8 ports 1/10G + 8 ports 8/4/2/1G FC) ?
thank you

Hardware requirements for using BI-IP

Hello experts,
i would like to have something like a how to paper in which i can find something about the hardware requirements for ideal using of BI integrated planning. Can anyone give me a help?
Thanks in advance.
Best Regards,
Ali

HI Ali,
I have been unable to find specific hardware requirements for using BI -IP so I would refer you to the hardware requirements for running Bi as per notes:
1013139 - prereqs for frontend bi7
1013201 - Hardware and Software requirement for BI Standalone frontend
and please also review the IP note:
1056259 - Collective note: Performance of BI planning
I hope this helps
best regards
Orla.

Is UDF required for this?!! or Can we manage with Node Functions?!!!

HI Gurus,
I have a requirement like below desc, Is UDF required for this?!! or Can we manage with Node Functions?!!!
Source File: ( File )
a) PO_TYPE
b) Style1
c) Style2
Note: Style1 leads to Headernode and Style2 leads to ChildNode, Style1 and Style 2 are interconnected.
Target File: ( Idoc )
a) Header Node ( EHDRNDE)
b) Child NOde ( CHLDNDE)
And my question is.... I have to populate Header Node and Child Node in target side on certain conditions of the source file. they are;
I) Whenver a different style1 comes in file...I have to create a Headernode for that in target file. Style1 can contain number of Style2 nodes with the same node. like
Ex:
i) Style1 -
Style2a, Style2b, Style2c
ii) Style1 ....... Style2aa, Style2ab.
For this above requirement, I have to create corresponding target nodes for Header ( Style1 ) and as well as for Child ( Style2)
for ex1: it should be one Header node in target and 3 corresponding child nodes
for ex2 : It should be One Header Node and 2 child nodes
For this requirement...can we use node functions....if it is...could you please help me.
....Stallin
Edited by: stallin xavier on May 1, 2008 4:18 AM

Hi,
You can do it by using node function as well as UDF also.
1) If your sequence is sorted and always come in sorted order only e.g. 1st come only style1 node and child node and then come all nodes from style 2 then u can use node function.
2) for parent node use collpse context then remove context.
3) for child node 1st differntiat according to your condition and then use split by value(value change)
4) If occurance of style1 node and style2 node is not fixed then you don't have any option you have to write UDF.
I think this will help you.
Regards,
Rohit.
Reward points if helpful

I use the operating system Mac os x 10.10.2 and would like me like to purchase Adobe Photoshop Elements 13 am with but not sure because is specified in the system requirement only os x 10.9. Can you help me?

I use the operating system Mac os x 10.10.2 and would like me like to purchase Adobe Photoshop Elements 13 am with but not sure because is specified in the system requirement only os x 10.9. Can you help me?

Yes, it works. Download the trial and see for yourself. Adobe never updates the system requirements after any version is released, so that is what was available last Sept. when PSE 13 was released.

Can I charge my iPad mini and/or my iPhone 4S from 220 volt outlets using just the correct plug adapter for the country.

Can I charge my iPad mini and/or my iPhone 4S from 220 volt outlets using just the correct plug adapter for the country, without a power converter?

Not staff or owner by a long shot.
I just know that anecdotally I have seen people reporting issues with their mini's charging. Is there a real issue or not? I don't know. Not a day goes by that a person doesn't post here complaining that their iPad won't charge and it turns out that they're trying to do it via USB or with the iPhone block.
But while there are a lot of user fixes sometimes it's good to have the pros take a look at things,and at the very least document that there has been an issue.
the four main reasons an iPad won't charge (beyond being plugged into a USB port)
Bad cable
bad outlet
bad brick
rule those out and it leaves issue with the iPad.

HT201209 Can I purchase iTunes gift cards for people in other countries to use?

Can I purchase iTunes gift cards for people in other countries to use? I have a brother that lives in Vietnam and I want to buy him a gift card that he can use there. I've read the iTunes gift cards are country specific.

What you have read is correct; gift cards are country specific. So only if iTunes cards are issued in Vietnam, and if they are if you can find a retailer there that sells such cards and would accept an out-of-country credit card, would you be able to purchase a gift card for your brother. The same would apply to any other country.
Regards.

Does the iPhone 4s need a data plan inorder for "siri" to work or can you just use your local wifi?

Does the iPhone 4s need a data plan inorder for "siri" to work or can you just use your local wifi?

It can use both in all the commercials they are using wifi im trying to find out just how much Siri depends on data but so far I think it mainly uses it to pull info up and for some reason to dictate email but it does work on carrier data I guess it's just slower so you don't neccersarily need a data plan in place or have to dig into it to use Siri If you have wifi close by

I am going to buy a time capsule it it will work on European 220v as the Mac Book Pro does. Can anyone tell me if it does when you use a plug adapter. Thanks

Will the Time Capsule work on European 220v if it was bought in the US. Do you need a transformer or just a plug adapter? Thanks

The Time Capsule will run on 100-240 volts and 50-60 Hz so you only need a plug adapter, not a transformer with this device.
For more details, look under the Electrical heading on the specifications of the Time Capsule.
http://www.apple.com/timecapsule/specs.html

HT203167 I had itunes on another laptop which is no longer in use. I have changed my apple id to my email address which has completed fine. I cannot find the itunes I had on my account before that I had on my other laptop. Can you help?

I had itunes on another laptop which is no longer in use. I have changed my apple id to my email address which has completed fine. I cannot find the itunes I had on my account before that I had on my other laptop. Can you help?

Your music will only be where you put it. It does not magically appear in other places. Copy it from your old computer or your backup copy of your old computer.
If for some reason you have failed to maintain a backup, not good, then you can redownload some itunes purchases in some coutries:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I want to maintain Safari 10.6.8 on my computer and then install Maverick on a separate internal drive so I can run new FCPX software and maintain the older OS for my older software versions. Can you tell me how please?

I want to maintain Safari 10.6.8 on my computer and then install Maverick on a separate internal drive so I can run new FCPX software and maintain the older OS for my older software versions. Can you tell me how please?
I see an upgrade path from Safari but don't want to change that and would like to be able boot from Maverick when needed.
Is this possible and how?
Thank you!

On the Apple site I see an upgrade path but not from scratch. I will use my current systems and then it place a complete install of Maverick on the other drive to boot from?
Thank you!

HT1657 I have rented a movie 8hours ago, and it will NOT play. The system also charged me twice, for the same movie! How can you help me please?

I have rented a movie 8hours ago, and it will NOT play. The system also charged me twice, for the same movie! How can you help me please?

For the film not playing, you can use the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that film and use the 'Report a Problem' link.
Not sure whether you can request a refund for the double charge via the same link, if not then you can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

I'm interested in buying fcp x for OS 10.8.5. Can you send me a link as to where I can do this?

I'm interested in buying fcp x for OS 10.8.5. Can you send me a link as to where I can do this?
I can't update to mavericks or above as it does not support my server software which connects my media drives.
I'm new to f cp x as I use Adobe Creative Cloud usually but have a new edit file to amend
Many thanks in advance

@Matt Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support
Worth a try.
@Innocentius: It might work because the OP is running Mountain Lion.
Russ

Is a power transformer required for use in other countries or can you just use a plug adapter?

Similar Messages

Maybe you are looking for