Is a script available to set a default background for email messages?

I am new to the community, not to Mac though. Currently I am on a new MacBook Air, Lion installed.
I had a couple of minor issues about mail, the first I solved myself using automator, and succeding in sending an attachment file from finder. It went on working also after the upgrade from snow leopard to lion.
I could not find out how to set a specific default background for new email messages (e.g. a color, or a certain template); I do not want to do it everytime for each message. I tried automator, the workflows runs ok, tried to save it as service for mail and for finder but it did not catch; as application it works, but veeeery slow.
When I pull down the mail window, the Services line says "no services available".
Anyone who worked on this?
thanks

Hi ..
That's not possible as yet but you can provide feedback to Apple here.

Similar Messages

  • Make the color BLUE the default color for email messages

    I know I can change the font color by message, but can I make a color change permanent? Also, how do I get a picture to be part of my signiture so that it stays small? Thanks!
    PowerBook G4   Mac OS X (10.3.7)  

    This is the Mail & Address Book - Tiger discussion. If you are using Panther, please post in the Panther discussions. Thank you.

  • Setting a default color for messages in Mail

    I figured out how to change the default font & font size in messages in the Mail application, and how to change the color in my signature, however I cannot figure out how to set the default color for new messages?

    Hi,
    Look at the Mail's preferences, under Composing. Select where you like to save notes and todos.

  • Convergence - default behavior for deleting messages

    How do you set the default behavior for deleting messages in Convergence to move to Trash instead of marking as deleted?

    jessethompson wrote:
    I deleted the nswmExtendedUserPrefs attribute completely on a test account. Then I logged in to Convergence with that account. I went to Options -> Mail -> General and confirmed that "Mark messages as deleted" is selected. I went back and checked the nswmExtendedUserPrefs, and they remain empty.It appears Convergence will not propagate nswmExtendedUserPrefs values if the system folders already exist. So if you log into Convergence for the first time (nswmExtendedUserPrefs unset) but you already have "INBOX" / "Trash" / "Sent" and "Drafts" folders created on the IMAP server (e.g. you had previously accessed the account using an IMAP client which had created the folders) the matching nswmExtendedUserPrefs: values won't get added.
    Specifically, the default behavior of this option is the opposite of ME. Should I open a Sun call to file an RFE to have this default setting changed back to the way it was?I've created a bug for this behaviour as it is inconsistent with UWC/CE behaviour and can lead to confusing default behaviour:
    bug #6862511 - "Convergence doesn't set defaults for nswmExtendedUserPrefs if system folders already exist"
    Raise a support case to get this bug escalated.
    Regards,
    Shane.

  • SRM 4.0- How to set the default values for product type (01) only for SC

    The radio button “Service” should not be visible.
    Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
    How to set the default values for product type (01) only for SC
    We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
    Here we can set defalut value 01 but it is not correct one since same search help is using several places.
    We need to limit the search help results only for SC.
    Kindly help out me ASAP.

    The easiest way to set defautl values is to edit the batch class.
    Goto the characteiristic and go to update values.
    In here you probably have something like 0 - 100 as a spec range.
    On the next line enter the default value within this range.  At the end of the line, click in the box in the column labelled "D".  This indicates the defautl value for the characteristic.
    If you need to you can do this in the material classification view as well.
    Just to be clear, these values will only show up in the batch record.  You can not have defautl values in resutls recording screens.
    FF

  • Can I set a default Reply-From email address on my iPad/iPhone?

    In Mail for the Mac, there is an option under the Compose settings to set a default Reply-From email address for all your emails, so that, regardless of which account any email came from, you will always reply by default from one specific address. Is there a way to set a default Reply-From address on the iPad/iPhone?

    [EDIT: Sorry, mis-read question. Ignore me.]

  • How to set a default value for particular field in SRM PO Portal

    Dear Gurus,
    Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
    My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
    I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
    Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
    Thanks in advance...
    Regards,
    Sathish

    Dear Laurent,
    Thanks for your response,
    But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
    My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
    Kinly guide me how to get the particular node of field in the Purchase order screen.
    Thanks you in advance,
    Sorry for the inconvenience if any
    Regards,
    sathish

  • "I would like to know how to set the default view for the columns. Somewhere I read it could be done in by music icon under Library.  Can't find it.  Thanks

    "I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it."  Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns.  Trouble is, I can't find a Musi Folder or icon in my user library.
    Any help would be appreiated.  OSX 10.9.2  iTunes version 11.1.5  Thanks!!! CW!

    From the iTunes menu bar try View>Show View Options.  Make sure what you want to see is checked and what you don't is unchecked.  You can do this (may need to do this) for any playlists, your main Library, etc.
    Good luck
    srb

  • How to remove the option "Set as default background..." from the right-click menu on a picture, for all users.

    Hi! I would like to know if there is any possibility to remove the option "Set as default background..." from the right-click menu on a picture, for all users. I know that's possible to edit userContent.css or userChrome.css, but this concerns only a profile at a time and being in a domain, I would like to set this for all people using Firefox.
    Can it be possible to edit a mozilla.cfg file to get the same result?
    Thank you in advance for help and tips.

    AFAIK then there is no way to do that system wide. You can only do that via userChrome.css or an extension like the Menu Editor per profile .You can install extensions globally, but the user will have to enable them anyway. That is not required for userChrome.css code.

  • How do you set the default magnification for Acrobat.  All documents that I open enlarge to 174% and are too big.

    How do you set the default magnification for Acrobat.  All documents that I open enlarge to 174% and are too big.  I see how to change the size after the document is open by going to File/properties/initial view and saving this setting.  I want all documents to open at 100% when they are first opened.  Can I set this as a default view?

    Hey Kris,
    You might go to Edit> Preferences> Zoom
    Do this without opening any particular PDF so that it applies to the program itself and not just one document.
    Try this and then let me know.
    Regards,
    Anubha

  • How do I set the default folder for file - open file... ?

    When I save a file, photo, etc., the default folder for OPENING a file becomes the last folder I SAVED to - even after closing and reopening Firefox. Is there a way to maintain the same default folder for opening files?
    Thanks.

    Originally posted by: kwarner.uneedspeed.net
    Well... I found over 200 bugs none of which seemed to talk about setting
    the default folder. I probably missed the relevant bug in the spew.
    I ask a question here as a last resort -- after I've done what I think
    is an appropriate search for answers.
    But thanks for your help in any case.
    Daniel Megert wrote:
    > DemonDuck wrote:
    >
    >> When I need to open a file not in the workspace, I use File -> Open File.
    >>
    >> But the default folder it opens is in C:\Documents and
    >> Setting\Administrator
    >>
    >> I would like File -> Open File to first open in someplace more
    >> reasonable -- like the workspace.
    >>
    >> How do I set the default folder for File -> Open File ????
    >
    >
    > Is your '?' key broken? Check bugzilla there's a feature request
    > regarding your question.
    >
    > Dani

  • How to set the Default values for Info Objects in Data Selection of InfoPac

    Hi All,
    Flat file Extracion:
    How to set the Default values for Info Objects in Data Selection Tab  for Info Package
    ex: Fiscal Year Variant  Info Object having values 'K4' 'Y2' etc  in Flat file
    Initially  default value(not constant)  for this info Object value should be 'K4'  in Info Package
    If I set data selection value for this info object K4 it will retreive records with this selection only? how to handle
    Rgds,
    CV

    Hi,
    suppose as your ex. if you are having fiscalyear variant in the dataselection tab then specify K4 in the from column, again the ficalyearvariant row and click on insert duplicate row at the bottom . you will get another row . In that enter Y2 in the from column. now you can extract K4, y2 values .
    haritha

  • Set a Default Calendar for New Appointments in iCal?

    I never found a post with a sufficient answer to this question. However, it seems as though I may have stumbled on a resolution myself.
    iCal has it's own default calendars: Home and Work. I use MobileMe so the MoblieMe calendar is listed there as well. I also have an iPhone 4. I wanted all calendars to syncronize automatically when I create a new appointment on any of the 3 locations (laptop, cloud, or phone). I found that when create a new event in iCal on my macbook pro, it wouldn't update with mobileme or my phone. This was because when I double click to create a new event, iCal automatically puts the new event into my "Home" calendar, even though it was unchecked and not highlighted. As soon as I double click to create the new event, iCal's default kicks in and the Home calendar in the "On My Mac" section suddenly becomes checked and highlighted all by itself and the new event is automatically placed there, never to be updated with the cloud or on my phone.
    I think the problem may be related to something I read under "How Do I Set a Default Calendar for New Appointments in iCal?" There a solution given was that the uppermost calendar was being defaulted to and it was suggested to drag the desired calendar to the uppermost position. None of my calendars would drag anywhere. However, I find that if I uncheck Home and Work in the column on the left under "On My Mac" AND then click the arrow so those two calendars are hidden (very important), and then check and highlight the only showing calendar: MobileMe, that (so far) when I doulbe click to create a new event, a new event is created in the MobileMe calendar, and Home and/or Work under the "On My Mac" section never becomes checked or highlighted. So the new event is created only in the MobileMe calendar listed and updates on my laptop, in the cloud, and on my phone.
    So far that has been my experience; but, it has been only minutes since I tried that, so let's see what happens after a couple of weeks or so of normal use and see if the problem is actually resolved.

    I have been searching for this information for weeks now -- thank you!
    This works for Google Calendar as well as for Mobile Me. I'm going to type a little more information here to see if I can help this answer come up more quickly for other users when they keyword search as I was doing.
    This answer helped me reset and change the default calendar for iCal. I can now set my Google Calendar as the default calendar in iCal. When I create a new event in iCal, it syncs to Google Calendar as the default calendar without having to choose another calendar. All my iCal new events now go directly to Google Calendar and sync to my iPhone and iPad. I couldn't move the gmail google calendar to the top position, and just unchecking Home and Work didn't change where new events defaulted. Now my new events automatically go from iCal to google calendar, and I don't lose track of any events. I think you can set any calendar as the default iCal calendar for new events using this approach.

  • Set a default layout for all users via DIAPI

    Hello everyone,
    I am attempting to set a default report for all users/business partners using the DI-API. 
    I can accomplish this in the B1 application via Tools> Layout Designer...>Set as Default
    If there are entries in the RDFL table for this layout, I am prompted to delete these entries and set this layout as the default for all users/BP's
    Based on the SDK Documentation, the following code should accomplish the same thing via the DI-API
    (stripped down for clarity)
    Dim oDefaultReportParams As DefaultReportParams
    oDefaultReportParams = oLayoutService.GetDataInterface(ReportLayoutsServiceDataInterfaces.rlsdiDefaultReportParams)
    oDefaultReportParams.LayoutCode = sMyLayoutCode
    oDefaultReportParams.ReportCode = sMyReportCode
    Me.oLayoutService.SetDefaultReport(oDefaultReportParams)
    Code executes fine, but it doesn't have the expected impact on settings.  The above code adds an entry to the RDFL table rather than changing the DfltReport field in the RTYP table like I expected, so instead of setting the default report globally for all bps/users, its adding an entry to the RDFL table to set the value for a specific user/bp
    I experimented by including and setting the following properties to every combination I could think of with the same results
            oDefaultReportParams.UserID = 'tried 1, 0, -1
            oDefaultReportParams.CardCode = 'tried "", "0", "-1"
    Am I misunderstanding the API, or using the wrong objects/calls...? If all else fails I could accomplish this via the UI-API instead, but the application was intended to be a stand alone app that didn't rely on SAP B1 application running, so any help or suggestions would be much appreciated.
    Thanks!

    Hi,
    Please repost at SDK forum to get quick response. Close this thread here with helpful answer.
    Thanks.

  • Set a default value for a radio button populated with a List of value

    Hi,
    I am using jdeveloper 11.1.1.3.0. I need to set a default value for a radio button populated with a List of value(Yes/No). Here's the selectonechoice code.
    <af:selectOneRadio value="#{bindings.Code.inputValue}"
    label="#{bindings.Code.label}"
    required="#{bindings.Code.hints.mandatory}"
    shortDesc="#{bindings.Code.hints.tooltip}"
    id="sor1" autoSubmit="true"
    valuePassThru="true" layout="horizontal">
    <f:selectItems value="#{bindings.Code.items}" id="si1"/>
    </af:selectOneRadio>
    I want to have the selectonechoice set to No by default. In the previous versions, I set the default value in the base attribute VO. But it is not working in the new version.
    Thanks

    Hi,
    this should work in JDeveloper 11.1.1.3 the same as in 11.1.1.2. If it doesn't then it is better to file a bug than to work around it
    Frank

Maybe you are looking for