Is a TWAIN driver included in the Phtosmart All-in-One 6525 printer driver download?

I am trying to use the new mobile deposit my bank recenly offered,however it requires a TWAIN driver. I downloaded the drivers under e6525 however I still am not able to participate in the service as my printer doesn't display in the available printers drop-down (the reason provided is does not support a TWAIN driver).
This question was solved.
View Solution.

Hi Jodi,
You can verify its installed by going to the following location
C:\Windows - if you scroll through you will see the twain_32 folder. If that folder is missing, then you can't scan with the HP software, and also from the sounds of it your banks. Just verify its there. Typically will be created/updated during installation.
You can also run the PSDR, fix scanning issue and it will list the twain driver.
I hope this answers your question. Thanks again.
I worked on behalf of HP.

Similar Messages

Hp Photosmart All In One d110a Printer Driver Installation Failure

I have tried over and over to install my printer wirelessly (as it is usb connected to my desktop that is a piece of crap and freezes all the time) to my Toshiba laptop. I have tried everything I can think of or have read, but nothing works! I am so frustrated and I just need to print my work, as I am a college student. I have uninstalled everything and reinstalled numerous times, I have redownloaded drivers and everything over and over, I feel like I've tried everything and it just fails. It doesn't even tell me it failed. I have to go into the control panel, into the printers and devices menu, and look at the printer icon (as microsoft word doesn't even show it's there at all). It says the network is connected but on down it says needs troubleshooting, yet the only issue it says it has is to install the full feature drivers and software which I have done so many times I'm ready to just throw the printer out the window. It just doesn't install or something, I don't know. Help please!!!!!!!!!!!

Try downloading the software from here after deleting what you've already installed from /Library/Printers/hp:
http://support.apple.com/kb/DL907
You could also use the AirPrint driver:
http://support.apple.com/kb/HT4356
Hope this helps

OLE driver included in the Oracle client 9i 9.2.04?

is that OLE driver included in the Oracle client 9i 9.2.04 for windows 2000
Message was edited by:
shakil_zubair

I believe there are three install options for 9.2 client ( Admin, Runtime and custom). If you choose runtime, OLE is not included. If you choose admin, OLE gets installed. If you choose custom and if you include oracle windows interfaces option, OLE gets installed. ( This is for the 9.2.0.1 base client install. I am not sure above 9.2.0.4 patchset)
Hope this helps!
-Ramesh

HT3986 This what my boot camp says , when ever i am trying to instal windows 7 ''There is no USB drive connected to the system. Please insert a USB drive to continue. "' Can someone help me . ?

This what my boot camp says , when ever i am trying to instal windows 7 ''There is no USB drive connected to the system. Please insert a USB drive to continue.

pump

My hard drive crashed and i lost all my rippped cd songs from the hard drive. Luckily they are all in icloud but how do i get ripped music from icloud to redownload back to the PC all in one go???

My hard drive crashed and i lost all my rippped cd songs from the hard drive. Luckily they are all in icloud but how do i get ripped music from icloud to redownload back to the PC all in one go???

Hi,
The simplest solution would to restore from your back up - https://discussions.apple.com/docs/DOC-4112
If you do not have a back, you can select first track on list in song view, from menu > edit > select all. Next ctrl+click and select download from pop up. You may wish to do this in small batches as it will take some time to download.
Jim

The Drive carriage in my Envy All-in-One will vibrate and make a "Buzzing" noise

The Drive carriage in my Envy All-in-One will vibrate and make a "Buzzing" noise. I can stop the noise temporarily by pushing in on the drive. The noise always returns.

Heavy wrote:
The Drive carriage
By Drive carriage do you mean cd/dvd drive?, could you plese give more details
Charles
Independent Computer Technician

OfficeJet 4500 Wireless All in One G510n-z driver

I have an OfficeJet 4500 All in One Wireless G510n-z. Is there a driver that I need for it to work with my Pavilion g6-2200 CTO notebook computer once I upgrade from Windows 8 to 8.1?
Or is the driver included in the file I download and install from the HP web site?
This question was solved.
View Solution.

Hi,
Please use the following package:
http://ftp.hp.com/pub/softlib/software12/COL32439/mp-109545-1/OJ_AIO_4500_G510n-z_Full_Win_WW_140_40...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Re-install software for the C6280 all in one printer... get an error message "can't find file"

need to re-install the software for the c6280 all in one printer. downloaded the latest install package from the HP web site. During the install process, I get an error message .. can't find user/appdata/local/temp/7z256315/setup/.....setup/blocksysuser........
the folder 7z256315 does not exist on the HD.
I also get a message that it can't find PS_A10_02_software.msi.
Windows 7 , C6280 all in one printer. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via wireless to the router.
hope you can help
thanks
charlie
This question was solved.
View Solution.

Hi cberistain,
Follow the steps below, and let me know what happens?
Step one: Clear temp directory
Type %temp% in the run or search for programs and files field
Highlight all the files in this folder, and then press the delete key to delete. If you get a message that the file is in use you will need to skip this file(s).
Continue with Step 2 below
Step two: Downloaded and extracted to your system:
1. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-77039-1&cc=us&dlc=en&lc=en&...=
2. Once the download is finished double click on the file to extract the software.
3. When the installation window opens press the cancel button to stop the installation
4. Type %temp% in the run or search for programs and files field
5. Look for, and open the folder starting with 7z (Example: 7zS2356)
6. Right click on the folder, and select Copy
7. Close that window, and all your open windows, and then in the middle of the desktop right click your mouse, and select Paste. This will move the 7z folder to your desktop.
8. Open the 7z folder you just copied to your desktop
9. Open folder Util
10. Open folder CCC
11. Run the uninstall_L4
12. When the uninstall has completed restart the computer
13. Run Disk cleanup from Accessories\ System Tools folder under all programs
14. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
15. Open the 7z folder, and then double click on the Setup.exe file which will be toward the bottom of the open window. Follow the on screen instructions to reinstall your printer.
Let me know if you are able to successfully install the software and driver, and are able to print & scan?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Driver for Officejet 4500 Wireless all-in-one will not install after upgrading to Windows 8.1

Upgraded to Windows 8.1 on Pavilion g6. Officejet 4500 Wireless all-in-one still prints but won't scan. Downloaded full feature driver. Installation quit giving error message 'file cannot be found'. Tried 'chat' sessions with no resolution
This question was solved.
View Solution.

Hello bob5e,
I am sorry to hear that you are unable to install successfully on your Windows 8.1 with your Officejet 4500 Wireless. I can see that the installation quits on you, giving you an error message. I am going to recommend trying a couple of things to hopefully make the installation successful.
1. First of all, try installing by using The Printer Install Wizard for Windows which finds the correct driver for your unit and installs it.
2. If that does not work, please try this next troubleshooting document step by step.
Installation issues - The Progress Bar on the Software Installation Stops or Stalls
I hope this helps!
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How do i remove all traces of a print driver

I need to remove all traces of my print driver for my canon printer.
I loaded my canon iP pixma 4000R with a print driver i downloaded. It seems to be a japanese version as the paper standards are all a bit strange. No 4x6 option, instead, something called Hagaki that does not quite fit. Canon says to reinstall the driver from the US website.
When I try to, it always asks me if I want to "upgrade". If I say yes, then I end up with the same print options. I think I need to fully delete and install the driver from new.
I delete the printer from printer list. I've been going through library files, but I don't know what else to delete.
Anybody have any suggestions?
Thanks
Tony

I would try Printer Setup Repair from Fixamac software. I believe version 5.0.3 is for Tiger. I am sure this program can do the job for you!
Joe

Will the 2710 all-in-one printer be supported by windows 7? works on xp, will it on windows7?

Is the 2710 all-in-one printer supported/compatible to Windows 7? It was on a XP, however hard drive is crashing and need to see if I may need to buy another all in one printer or able to keep my 2710.

HP recommends that you use genuine HP cartridges. HP cannot guarantee the quality or reliability of non-HP cartridges, or refilled HP cartridges.
Well that being said about the cartridge, I would try a power reset like this:
With the power on, open the ink access door. Remove the power from the printer. Remove the ink cartridge and close the cover. Wait at least 30 seconds then reconnect the power cord to the printer. Turn the printer on. Open the access door and insert the cartridge. That may clear up the issue, if not well.......
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Driver for windows 7 HP All-in-One - 20-2210ix

Driver req for windows 7 32bit & 64 bit

Hello @Bkumar19,
I understand that you are looking for Windows 7 drivers for your HP All-in-One - 20-2210ix. Unfortunately, according to the HP All-in-One - 20-2210ix Drivers there are only Windows 8.1 drivers currently available for your computer. Your only options would be default Windows drivers or try to find the drivers from the individual components manufacturer sites.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

HT3669 Unable to run the HP All-in-One Installer for LJ 3055 -- Error message says I need to install Rosetta

I have an HP LJ 3055 All-in-One. Previously, I haven't used it connected to my Mac (i.e., only in 'standalone' mode). I now want to use the unit's software for faxing and scanning purposes.
However, when I insert the CD that includes the HP All-in-One Installer, I see an error message saying:
"To open LaserJet AIO Installer, you need to install Rosetta. Would you like to install it now?"
I assume this is related to the CD's having been produced contemporaneous with Tiger, not Snow Leopard -- though I have no idea why it's prompting about Rosetta, since this is a Macintosh installation CD.
Can anyone inform me what I need to do to install the software (i.e., to run the installer) under Snow Leopard, so that I can access the All-in-One's functions via the Mac?
Thanks. Replies appreciated.

kostby wrote:
Responding to two of your posts here...
Thanks. It wasn't (and still isn't) clear to my why I was getting the prompt about installing Rosetta. While using the unit with Tiger, I never saw anything about a need for Rosetta (i.e., nothing indicating that any of the software on the CD was pre-Intel).
Printing continues to be available from the Mac but nothing else is supported via the computer. Scan, fax and copy are available only directly from the unit.
Funny that this can happen with a unit that continues to work perfectly well, without a hitch. You'd think that OS upgrades would, if anything, enhance software control of a unit -- rather than eliminate it completely.
★ Is there any reason to think that going the 'Rosetta' route would restore the lost functionality (in 10.6.8)? ★
Thanks.
The reason you were getting the prompt about installing Rosetta now is because Rosetta was automatically installed on OS X 'Tiger' 10.4 and 'Leopard' 10.5. HP didn't mention it as a requirement, because at the time, it was already there and invisible.
Rosetta became an optional install on OS X 10.6, because (I presume) the number of programs and devices still using pre-2006 PowerPC code and thus needing Rosetta, was in steady decline. Why add extra clutter to (this is my guesstimate) 85% of the Macs running Snow Leopard that DO NOT need Rosetta?
In my opinion, it cannot hurt to install Rosetta now.
Only programs (your HP drivers) that REQUIRE Rosetta will even attempt to use it.
The scan fax and copy functions don't work now with Snow Leopard, so at worst, they still won't work.
You can always delete Rosetta again if you need the disk space.
Message was edited by: kostby
If I correctly understand how Rosetta worked, it created an emulation environment in which certain software (including 'multifunction printer' drivers) would work, the implication being that these software products were not specifically written for the Mac OS.
However, wouldn't those drivers still also have to be supported by the Mac's currently-installed OS in order to work -- as they were in Tiger and Leopard (but are not in Snow Leopard)?

The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?

The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?

Is the Paper Size: set to US Letter and Scale: set to 100%
Dennis

I have a hp C410 all-in-one series printer. When I updated to 10.8.1 it was no longer supported. HP told me to go to the Apple system updates and download an installation program. I can't find that program in my Apple updates file.

I have a hp C410 all-in-one series printer. When I updated to 10.8.1 it was no longer supported. HP told me to go to the Apple system updates and download an installation program update. I can't find that program in my Apple updates file. Please help.

From the HP Support site, this may help:)
"Re: Problem with latest HP software update for Mountain Lion and HP Photosmart Premier C410.
Options
08-10-2012 10:54 AM
Download and install this: http://support.apple.com/kb/DL907
Reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it."
Hope this helps

Is a TWAIN driver included in the Phtosmart All-in-One 6525 printer driver download?

Similar Messages

Maybe you are looking for