Is a UPS required for the new MacPro?

Given that the primary drive is all flash memory, how easily can it be erased by a power spike or brownout and therefore requiring a UPS?

More likely to see your modem and other devices damaged by those power events.
I don't think the question of whether, only what size, and that depends on what else you want to be powered and covered.
A good 1000VA Cyberpower is a good investment, and even 1500VA and still under $200. Added protection and insurance.
I can't imagine not having one. I don't know if sudden outage will affect RAM but my guess is "maybe."

Similar Messages

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell wh

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell what I do and do not have?

Apple Menu --> About this Mac.
Mylenium

I've read that Promise Pegasus2 series does not sell replacement parts. I'm buying the new MacPro but am concerned about spending $2K for storage that may break and cannot be fixed. What are others buying for storage for the new MacPro?

I've read that Promise Pegasus2 R6 thunderbolt 2 series does not sell replacement parts (no replacement parts for any of the Pegasus line). I'm buying the new MacPro but am concerned about spending $2K for storage (12tb version) that may break and cannot be fixed (am told that one must purchase a new unit if a part breaks). What are others buying for storage for the new MacPro? Thanks so much for your help.
Discussion about this issue at MacWorld.com: http://www.macworld.com/article/2082783/first-look-promises-pegasus2-r6-thunderb olt-2-raid-array.html

I've used the original Pegasus R6 units for a couple of years now and have been very pleased with them. On the two occasions I've had to call on their technical sujpport, I've found them readily available, knowledgeable, and very helpful. In one case it involved the reset of a unit after a power failure at an inopportune time; in the other case it was a question about upgrading disk drives to higher capacities (1 Gb gto 4 Gb). I was pleased to learn that their tech support people were in California and as good if not better than upper-tier AppleCare reps. The hardware itself has functioned flawlessly so far.

Photoshop Elements 10 plug-in required for the new Camera RAW file format used by the new Canon 6D

I have a new Canon 6D and prefer to use Camera RAW. This new file format is not compatable with Elements 10. A new plug-in maybe is required.
Can anyone help?
Regards,
gordo422209

I can't find Canon 6D in the list of supported cameras for even ACR 7.3. I would thus suggest you converting your raw files to dng using dng convertor tool and then open the dng files in ACR.
Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your original raw files as backups and for use in the manufacturers software)
Windows download click here DNG Converter 7.2
Mac download click here DNG Converter 7.2
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial
Source: http://forums.adobe.com/message/4893342#4893342 curtsey of 99jon

Im trying to download the new itunes so i can use my iphone 5 , however , the new itunes requires Mac OS X 10.6.8 or later and i cant seem to install that onto my imac even after searching for the new update (my imac is currently on 10.5.8.

.Im trying to download the new itunes so i can use my iphone 5 , however , the new itunes requires Mac OS X 10.6.8 or later and i cant seem to install that onto my imac even after searching for the new update (my imac is currently on 10.5.8.

You have already seen that you cannot load the new iTunes into your 10.5.8, so as Neil says, you need Snow Leopard (current cost £14). And you'll probably need to update the disc you buy via the combo update, though that is free.
As far as the new iTunes is concerned, there's been a certain amount of grumbling so you may want to study the forums before you update. The main problem has been with album artwork which does not transfer easily.

I lost my iphone in the water I bought a new one 4S now I have 2 back ups in Icloud, the one for the new Iphne and the old Iphone where I have the most info I need. How I can download my old backup?

I lost my iphone in the water I bought a new one 4S now I have 2 back ups in Icloud, the one for the new Iphne and the old Iphone where I have the most info I need. How I can download my old backup?

Welcome to the Apple community.
You cannot download a backup from iCloud, the only way to access it is to restore to the backup with your new phone, which you should have done when you first connected it. If you restore now, you will lose all the new information you have added to your new phone.

I require an update to Camera Raw for CS6 for the new Olympus 4/3 OMD E-M5 MARK II to process my images. How can I get this?

I require an update to Camera Raw for CS6 for the new Olympus 4/3 OMD E-M5 MARK II to process my images. How can I get this?

You may need to purge your Bridge cache for the folder with Mark II raws in it using:
Bridge / Tools / Cache / Purge Cache For Folder current-folder-name
I can see Mark II files in Bridge 5.0.2 for CS6 after installing the ACR 8.8 update, but I didn't try viewing thumbnails in the folder before I had ACR 8.8 so there were no cached "cannot read this file" thumbnails..
If purging the cache and letting it rebuild doesn't work check to see what version of ACR Bridge has by using ridge / Edit / Camera Raw Preferences... (that's the Windows menu path). Here is what I see:

Will final cut pro X 10.0.8 still be available for purchase after the new final cut pro release for mavericks/new macpro in december?

will final cut pro X 10.0.8 still be available for purchase after the new final cut pro release for mavericks/new macpro in december?

10.0.8 is no longer available, except in the trial version. The current sale version is 10.0.9. Apple has never sold older versions of their software, only the current version. That's not going to change in the near future.

TS3992 I lost my iphone 4, i now have an iphone 5. I tried to restore the phone from the back up but i accidently restored the back up intead. now i can't seem to access the old back ups for the new phone. Does this mean Icloud has deleted the old back up

I lost my iphone 4, i now have an iphone 5. I tried to restore the phone from the back up but i accidently pressed "restored back" up intead.
Now i can't seem to access the old back ups for the new phone. Does this mean Icloud has deleted the old back ups?
Help!
xD

Help for forgotten passcode > iOS: Forgotten passcode or device disabled after entering wrong passcode
When you have access to your iPhone again, FaceTime is a pre installed app that cannot be removed.
Try a search > iOS: Understanding Spotlight Search

On installation of Firefox 4 beta, it tells me that it won't run on my Mac. When I go to system requirements, it takes me to a page for Firefox3.6 requirements. Where can I find the requirements for the beta?

The link to system requirements for Firefox 4 beta takes you to a page that gives you the requirements for Firefox 3.6 instead. I assume that the requirements for the beta are different as I can't seem to install the beta on my Macs. Where can I find the beta system requirements?

I never expected Mozilla to neglect the users of Apple's PowerPC (PPC) computers, while still supporting much older operating environments such as Windows XP. So, I should just throw away a $6,000 system, which is still fast and functional, and contribute masses of heavy metals to land-fills because…?
I'm hurt and confused after supporting Firefox for many years — installing and using it not only on my own computers but on most of my customers' computers. Now I have to tell my customers with PPC Macs they can't have a secure cross-platform browsing experience from Mozilla. They'll have to learn to use some other browser, or buy a new computer.
If one doesn't buy a new computer every year, one doesn't deserve Firefox 4. This is sort of sounding more like a Microsoft™© doctrine. (But wait, I can still have Firefox 4 on a ''SERIOUSLY CRAPPY WINDBLOWS XP pile of rubbish?!'') Please open your eyes Mozilla. This just doesn't make sense.

I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?

I want to upgrade my 2008 Mac pro to the latest one, will it meet the requirement for the future Software that's coming out for the next four years?.

I'd wait. What can't you do that you need? You mean you want to buy a new model, then why not wait for an actual new one, not the two year old 5,1, when you need to and have outgrown.
Yours will run Mountain Lion. yours is 4 yrs old and still supported and has life left.

I would like to upgrade my OS to the latest version. I now have 10.6.8 and my machine has 1Gb of memory. Need 2Gb for the new OS. Is is possible (and practical) to add memory to a machine that's five years old?

I would like to upgrade my OS to the latest version. I now have 10.6.8 and my machine has 1Gb of memory. Need 2Gb for the new OS. Is is possible (and practical) to add memory to a machine that's five years old?

You can put two 2gb RAM sticks in your model 2,1 but it can only use 3,3gb. This is a hardware limitation and cannot be changed.
http://en.wikipedia.org/wiki/3_GB_barrier
http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-core-2-duo-3-g b-memory-limitation-details.html
OWC tests have found that there is a slight speed increase with having two 2gb sticks in rather than one 1gb and one 2gb. Your model is in the gray lines at the bottom of the graph. http://eshop.macsales.com/shop/Memory_Benchmark/Apple_MacBook/
You can buy Lion for $29 from the App Store witht a model 2,1 MacBook. Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. As for programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.
These are good online stores for Mac compatible RAM
OWC http://eshop.macsales.com/shop/memory/MacBook/DDR2/ - They offer Mac tested RAM at very good prices.
Crucial Memory http://www.crucial.com/ - good place to buy RAM from all over the world. They also have an excellent memory selector that allows you to choose memory based on your computer's model
Data Memory Systems http://www.datamemorysystems.com/apple-memory.asp - another good, cheap place to buying RAM if you live in the U.S.
Here are instructions on replacing RAM in a MacBook with a removable battery. http://homeoffice.consumerelectronicsnet.com/articles/viewarticle.jsp?id=44404
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/

Is there a fix for the new virus that hit apple computers called "FLASHBACK"?

Is there a fix for the new virus that hit apple computers called "FLASHBACK"?

Current recommendations is turn Java off. Generally you don't need it. Do not confuse it with Javascript which you do need for your browsers.
You can disable in the browser you are using and/or more globally using the Java Preferences too (in Utilities), General tab (uncheck the checkboxes).
More new tricks from Flashback
How to check for and disable Java in OS X
Protect Yourself from the Mac OS X Java Vulnerability
If it turns out you need it for some specific application or web site that you trust then turn it on only when running that application or visiting that site. If your work requires Java be enabled then at least disable it in your browsers.
If you do need to run Java, be sure that you pick up the Java Software Update 7 posted recently that takes 10.6 and 10.7 up to Java SE 6 revision 31.
Flashback is a moving target with lots of strains (various versions, permutations) and changing all the time. So who knows what's next?

Pre-requisites required for the local configuration of the Weblogic portal

Hi All,
I have got the code from the client. It is appenntly came to know that Code has been developed in Weblogic workshop.
When we build teh application we are getting the following web services related Errors:
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
ERROR: ERROR
ERROR: DESCRIPTION:An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.NullPointerException:null
WARNING: SUGGESTION:An unexpected error occurred. Please contact [email protected] for further assistance.
PortaleWebApp: Created control beans for 19 controls in 12703 milliseconds
BUILD FAILED
ERROR: Build failed with 15 error(s).
When we deploy in the Portal weblogic server, Application is deploying with out any errors. But it is not showing any login page when I start the PTLoginMain.portal file.
As I am completly new to this Weblogic Portal server, Please let me know, Do i need to configure the any setting before starting the application. I mean to ask you that Pre-requisites required for the local configuration of the Weblogic portal Server.
Any Help would be much appriciated.
Regards & thanks,
Nirmala Vijaay Sekhar Varre

and your server address can be resolved or not?
Are you accessing the server from Windows or Linux?
- On Linux try editing the /etc/hosts file and add something like: 10.241.110.105 server1.etcetera
- On Windows try editing the C:\WINDOWS\system32\drivers\etc\hosts file and add something like: 10.241.110.105 server1.etcetera
When this works, contact your system administrator and ask him or her to map an ip to your hostname in DNS and DHCP
such that the servername automatically resolves the ip-address

Suggestion for Apple: MacBooks as terminals for the new Mac Pro

Suggesting Apple to enable using MacBooks as terminals for the new Mac Pro if connecting through the thunderbolt.
I am planning to get a new Mac Pro this month and use it as a 'portable' workstation since it weighs only 5kg.
I am working on scienctific research which requires travels quite often.
I want to have a workstation with me when I'm off-site so that I can work without worrying about the network connection.
It would be great if I can use Macbook Air as a display, keyboard and touchpad for the Mac Pro.
I will be fully geared by taking a Mac Pro and a MacBook Air with me where ever I travel.

I don't know much about Thunderbold connections.
Especially how does it combine PICe and DisplayPort signal together.
I would like the MacBook serve as an external screen and an external PCIe video card to the Mac Pro, together with its touchpad and keyboard connected to the Mac Pro as an external USB keyboard and touchpad.
In this case, one may not even boot into the OS on the MacBook side, just need proper drivers in the Mac Pro side for the 'external PCIe video card', keyboard and touchpad.

Is a UPS required for the new MacPro?

Similar Messages

Maybe you are looking for