Is a western digital cavier black 1tb, 64mb compatible mith my 2005 quad core G5 power mac

Hi can anyone tell me, if I can use a western digital 1TB cavier black hard drive in my Power Mac 2.5 G5 quad core please.

You can check here to see what if any WD drives are compatible with your Mac:
http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1787&p_c reated=1203707437&p_sid=dO9DFidk&p_accessibility=0&p_redirect=&p_srch=1&p_lva=&p _sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MjQ4LDI0OCZwX3Byb2Rz PSZwX2NhdHM9JnBfcHY9JnBfY3Y9JnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9Ym9vdGFibGUgb24gbWFj &p_li=&p_topview=1
Using a WD drive with Time Machine running Lion:
http://wdc.custhelp.com/app/answers/detail/a_id/1694/related/1/session/L2F2LzEvd GltZS8xMzE4NDM1NTg0L3NpZC91WDcxWW5Haw%3D%3D
A few basic facts to consider when buying a hard drive:
http://macs.about.com/od/peripherals/bb/exthd.htm

Similar Messages

  • Western Digital Caviar Black 1TB drive - anyone using these in internal bay

    Just a side thread to a current discussion I've started (http://discussions.apple.com/forum.jspa?forumID=1125&start=0) to try to see if anyone can report positive results using a Western Digital Caviar Black in their Mac Pro, especially if they're doing so as the Startup Disk.
    I have horrible performance with a new one and want to see if others have had good or bad experience.

    Out of curiosity did you prepare the drive properly? Most new bare drives have not been partitioned for use on the Mac and also are formatted FAT32. Consider doing the following;
    Extended Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the drop down menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    I have seen elsewhere some mention that WD drives have some configuration jumpers. You might check the information about the drive's configuration at the WD support site to be sure that the drive is correctly configured (if there is a need to do so, that is.)

  • Hp (compaq) mini 110c - no boot with Western Digital Scorpio Black WD5000BEKT

    Dears
    I just bougth Western Digital Scorpio Black WD5000BEKT plug in and no boot  
    I have black screen, HD is alive because i hear is started and the HD led blink in same frequency so looks like Bios cannot read HD firmware to do initialization.
    Motherboard version should be 308f if not mistaken, AMI BIOS has not been upgrade yet, actually i saw only one BIOS update which fix some Bluetoth issue. 
    Could anybody can confirm that disk is running OK on that model ?
    Is there any quick workaround ? 
    I would like to avoid editing(moding)  the BIOS if possible. 
    I am looking forward for your answer
    Link to the HP mini
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01894558&lc=en&jumpid=reg_r1002_us...
    Any support will be highly appreciates.

    No problem maiki83. I am glad you got it running.
    I believe however, that the processors are all fixed to the system boards in the Compaq Mini 110c series. Not having your exact model number, I will show you first how to find your exact model number, and then where to find the information (if it exists).
    <How Do I Find My Notebook Model Number>: http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
    Go to HP's support page and "Enter your product name/number".
    HP Consumer Support:
    http://support.hp.com/
    When you are on your products support page go to the 'User Guides' section
    Look for the "Maintenance and Service Guide"
    In the guide locate the "Removal and replacement procedures" then the "Component replacement procedures"
    If there is a "CPU" or "Processor" category then it will have a list of supported CPU's.
    If you can only locate "System Board" then the list of boards will show the processor that comes on the boards. The latter will most likely be the case.
    Good luck.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Cannot boot from 750GB Western Digital Scorpio Black

    I just installed a new 750GB 7200rpm Western Digital Scorpio Black in my early 2008 15" MacBook Pro (last pre-unibody). I can boot the computer from the Scorpio Black when it's in an external enclosure, I can boot another computer, a MacBook, from the Scorpio Black via firewire while that's installed in my MacBook Pro, but what I cannot do is get the MacBook Pro to boot off the Scorpio Black as the internal drive. It will recognize it and show the main and recovery partititions, but it won't boot the OS (10.7.1.).
    Here's a rundown of the installation and troubleshooting steps I've taken:
    1.) Installed the drive in an external USB enclosure, formatted GUID partition table (GPT), file system HFS+ extended journaled.
    1.b) Downloaded and installed Lion (10.7.1) from the App Store, used migration assistant to transfer accounts from my (now former) internal drive, and then booted from the Scorpio Black in the external enclosure to ensure everything worked fine.
    2.) Installed the drive via iFixit instructions. Everything fit properly and I double checked the SATA connector was seated correctly.
    3.) Booted computer for the first time with the Scorpio Black. It stuck at a spinning wheel on a grey screen.
    4.) Held down option key at startup -- the computer showed the main partition and the recovery partition on the Scorpio Black as the startup drive options.
    5.) Tried the recovery partition -- spinning wheel on a grey screen.
    6.) Tried safe verbose boot (command - shift - v) -- it interleaves "still waiting for root device" with "SATA WARNING: Enable Drive PHY PM failed" and "SATA WARNING: auto-activate failed".
    7.) Reset PRAM & NVRAM -- no joy.
    8.) Connected the MacBook Pro via firewire to a Core 2 Duo white MacBook also running 10.7.1. The MacBook recognized the drive and in Disk Utility, I could see all the partitions on it.
    9.) Ran repair volume (for the drive) and repair partition (for my main partition) from disk utility on the MacBook -- it said everything's fine with both.
    10.) In system preferences, set the Scorpio Black as the startup drive for the MacBook.
    11.) Astonishingly, the MacBook booted up just fine off the Scorpio Black in the MacBook Pro. I logged in, opened a few photos and played a video. Everything worked just peachy.
    12.) Booted the MacBook Pro off my old internal hard drive, now in an external enclosure.
    13.) Disk utility sees the internal Scorpio Black, and reports everything is fine with the volume and the partition.
    14.) System profiler says everything is fine when I check under SATA. SMART status is verified.
    Which brings me to step 15: admit defeat and ask for help. Any suggestions? The exact model number of the drive is WD7500BKPT. I purchased it from Other World Computing.
    Thanks for any help.
    Cheers.

    I actually first replaced the stock hard drive with a Western Digital 500 GB Scorpio Blue (i.e., a 5400 rpm drive). Here's what I can tell you about all three.
    First, I didn't notice any difference in noise, vibration or power consumption between any of the drives. The computer felt stock with both of the Western Digital drives.
    In terms of speed, my understanding is, all other things being equal, a larger drive is always faster than a lower capacity drive (I believe that's because more of the data is on the faster rotating outer areas). That being said, the step up to the 750GB 7200 rpm Scorpio Black was a bigger one than to the 500 GB 5400 rpm Scorpio Blue -- it gave a noticeable bump in performance. Opening my Aperture library and browsing photos went from sluggish and borderline unusuable to acceptable, or even good.
    Bottom line, it's not a solid state drive, so don't expect MacBook Air levels of responsiveness, but I can wholeheartedly recommend the Scorpio Black.

  • Western Digital MyPassport 1TB not recognized

    I have had a Western Digital MyPassport Essential (1TB) for a little more than a year now. I'd been using it fine with my Late 2008 Aluminum Unibody MacBook. This August, I purchased a MacBook Pro with Retina Display and now the drive rarely (if ever) shows up when connected. I've tried uninstalling and reinstalling the drivers, plugging it into different ports, and nothing works. Yet, when I try to use it with another computer it works fine.
    Has anyone else had this problem/know of a fix? I ordered a new USB 3.0 cable from Amazon, so maybe that will solve the problem, but I'm looking for a solution in the meantime.

    its not the cable, its the SATA card thats failing.   Seen it a 1000 times,  that part is a stinker and as sure as sunrise
    junky 50 cent SATA bridge/card in an external HD
    **When you plug it into another computer and find that it works but works only sporadically on your primary computer, thats also indicative of a SATA card failure, hence the "haunted hard drive syndrome" name given to the strange nature of external HD behavior. It often makes no logical sense what is going on when your HD cant be logically diagnosed due to odd behavior.
    External HD are very easy to diagnose. Bad USB cable (on commercial sold USB drives) almost doesn’t exist anymore.
    External USB HD have 4 'parts' (not counting the HD internals)
    1. USB cable (never an issue anymore, approaching 100%)
    2. HD enclosure.....a plastic or metal box which cannot ever be an issue.
    3. the HD itself   (which will either fail or make noticable 'going bad' signals)
    4. ....and last but not least is the epicenter of 'weak links' ,.....a SATA card/bridge that is connected to the HD inside the HD box, the size of a stick of gum, with SATA female on one side, and female USB on the other side, containing circuitry for data transfer between the SATA on the HD and to USB on the other.
    While these bridge cards are better than they used to be, theyre still insanely unreliable.
    There are literally probably MORE than 100,000 perfect external hard drives out there thrown away every year because people assume the "hard drive is bad" when really they could crack open the HD enclosure, remove the HD and put the good HD into a new enclosure.
    See this video of the SATA CARD, its at 8:55min. http://www.youtube.com/watch?v=2pS_EDsP2KI
    All conventional HD external are nearly 100% like the video above.
    This  nasty piece causes very odd behaviour, some have called it "haunted hard drive syndrome".  Random ejects, random strange vanishing of the HD , especially in mid transfer of data.
    the card attached to the TOP of the HD plugs in, that the SATA bridge

  • Western Digital External Drive and a VERY slow computer. Is my HD failing?

    Hello, thank you for looking at my question.
    First off, I am NOT very tech-savvy, but I'm willing to research and learn, I'm just afraid to make a mistake and blow up my computer.
    I have had my Macbook for 2 years. I have not backed up my hard drive during that time. Bad, I know.
    Recently I've noticed my Mac getting slow with the "spinning beach ball" showing up more often and everything getting slower. Usually a reboot will help. Yesterday, for the first time, the reboot took about 8-10 minutes! I figured that wasn't a good sign, so I headed down and picked up an external hard drive (Western Digital Essential model, 1TB) and figured I'd back everything up. I formatted the drive according to the Mac partition model (tech support from WD helped over the phone) and got it going. From 1530 to 0800 this morning, of 52 GB it had only backed up 15.3 GB. The fan was running at high speed the entire afternoon and night. That's about one GB per hour. Is that normal?? Then, it froze and wouldn't respond, or back up at all. Just nothing. I held the power button down and restarted it.
    At this point, I am concerned that perhaps the hard drive is failing (hence the speed and fan issues) and that maybe I should be taking it in to a repair shop (we don't live anywhere near an Apple store)
    Do you think this may be the case? Is there any way to back up my hard drive faster - before it dies? I have two years worth of photos and papers, etc on there, music and such and it would be a tremendous loss if it all crashed.

    carroteye wrote:
    Hello, thank you for looking at my question.
    First off, I am NOT very tech-savvy, but I'm willing to research and learn, I'm just afraid to make a mistake and blow up my computer.
    Good! Better to inquire than leap!
    I have had my Macbook for 2 years. I have not backed up my hard drive during that time. Bad, I know.
    Yup.
    That's about one GB per hour. Is that normal?? Then, it froze and wouldn't respond, or back up at all. Just nothing. I held the power button down and restarted it.
    No, not normal at all.
    At this point, I am concerned that perhaps the hard drive is failing (hence the speed and fan issues) and that maybe I should be taking it in to a repair shop (we don't live anywhere near an Apple store)
    Do you think this may be the case? Is there any way to back up my hard drive faster - before it dies? I have two years worth of photos and papers, etc on there, music and such and it would be a tremendous loss if it all crashed.
    As slow as that backup was, anything else will be nearly as bad.
    There are four common causes of this:
    Your startup drive is nearly full (less than a couple of GBs of free space). If that's the case, find something big you can "archive" to CD/DVD or copy to the external HD and delete.
    The drive is failing.
    Corrupted directores, etc., in the file system
    One or more "runaway" processes, usually from incompletely-installed or partially-deleted apps
    |
    It's a toss-up; try to diagnose what's wrong, or try to get a backup.
    The fastest way to back up, with the least "thrashing" of your hard drive, would be to start up from your Leopard Install disc and use the Restore tab to make a copy of your internal HD on the external.
    That will copy any file system problems "as is," but if your internal HD is beginning to fail, at least you'll have a full copy of the data (corrupted or not) on the external HD.
    Check this to be sure your WD drive will boot your Mac: http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?pfaqid=1787 If not, do all the steps below except #4.
    Here's what I'd recommend:
    1. Start up from your Install disc, per the yellow box in #1 of [Formatting, Partitioning, Verifying, and Repairing Disks|http://web.me.com/pondini/AppleTips/DU.html]
    2. Reformat the external HD, with a single partition, per the blue box there. You'll want the +Mac OS Extended (Journaled)+ Format and either the GUID or +Apple Partition Map+ *Partition Map Scheme* as detailed there.
    3. Use the Restore tab to copy your internal HD (almost certainly named +Macintosh HD)+ to the external HD, per #7 in the link above. Note that will copy the name of the internal HD to the external.
    4. When that's done, quit Disk Utility, then select +Startup Disk+ from the Utilities menu in the menubar (per the yellow box above). Select the external HD and start up from it.
    |
    The copy may take a very long time. There will be a progress bar, but they're notoriously inaccurate under the best of circumstances. If it completes, and you can start up from the external, post back and we'll see if we can find the problem, and either fix it or confirm that you need to take it to Apple.

  • Macbook Pro Harddrive Upgrade Western Digital Scorpio Blue WD10TPVT

    I recently purchased a Western Digital Scorpio Blue 1TB hard drive (WD10TPVT) in order to replace the 500GB hard drive in my Unibody Macbook Pro 15" running Mac OS X 10.6.4.
    After swapping the hard drives I wanted to install Snow Leopard from the scratch on the empty hard drive. I partitioned the hard drive and started the install, but after about 30 min the computer seems to freeze. I tried several times, and each time the behavior is similar. After swapping the hard drives again (back to the old hard drive) I connected the WD10TPVT via an external USB enclosure, and now it works fine - over an extended period of time. So I'm fairly sure the drive itself is working properly.
    I did some research, and it seems that people had similar issues with this drive (e.g. a thread in this forum titled "WD 1TB WD10TPVT in Late 2009 15" Unibody Macbook Pro - NEED HELP!" from April 15). It seems to me that this issue is old but still unresolved, and I wonder if there are any new developments concerning this problem. Is there a "generic" solution?
    Another question: the WD10TPVT has 4 additional pins next to the ribbon cable connector. I didn't find any documentation on this, but I assume that these are jumper pins. I found some information that certain jumper configurations will/will not work in the Macbook Pro, but no details on this. What jumper settings do I need to get the WD10TPVT running in my Macbook Pro?
    Thanks a lot!

    There are known issues with replacement HD's on 2009 MBP (and, posibly other models too).
    According to Apple support, it is due to acceleration sensor, which in MBP requires HD to have custom firmware.
    There was even a fix to solve this issue (which I cannot find now, and it actually didn't solve much).
    So far, the best "fix" seems to be to install HD with Apple firmware (works 100%). There are reports that certain drives without acceleration sensor are working properly too, a bit expensive to try, though.
    Still a mystery why Apple does not clearly warn about this issue.

  • Windows 8.1 setup on 4TB Western digital HD problem

    hello: i assembled a pc with the following spec's:MB Gigabyte x99 gaming g1.HD western digital 4tb black when booting from dvd-rom to install windows 8.1 pro 64bit, windows setup screen the available hd's to install windows on it.when selecting the above hd and said new, winodws setup only recognise 2.5tb from the 4 tb! and the rest is un-allocated partion and couldn't format or use to create bootable partion.when erasing all partions on hd, there are 2 allocated partions one 2tb, and the oher 1.6tb.couldn't move from here. this problem happened on another pc with MB Gigabyte z87x-d3h and 3 tb westen digital black.please  help

    Hi there, welcome to the community, 
    Did you format the drive before installing Windows? Because what you are explaining seems awefully similar as to when you format drives that are 2TB and larger in MBR instead of GPT.
    If you are 100% sure that you have formatter the drive using GPT parition table, you should be able to expand the partition once the OS is installed.

  • Western Digital external 500 GB with MacBook?

    A family member received an external Western Digital 500 GB USB drive for Christmas. We reformatted it as a Mac drive and attached it to her MacBook, but when starting to copy over files, it hangs after transferring 1.75 GB, regardless of the size of the files we are copying (some of which are slightly over 10 GB movie files). Is this an issue with formatting, or power, or both? It's very frustrating.

    Hi,
    I have a Western Digital 320gb External Hard Drive and I am able to move 7gb files in 6 minutes with no lag. Maybe it is best for you to return or exchange it. There is no stocking fees for these sort of items at most retail stores.
    Hope this helps in your decision making.
    Happy Holidays!!!

  • How to attach an external Western Digital Hardrive

    I have a G4 12 inch power book. I have about 554 mb of memory left on my hardrive. I just purchased an external western digital hardrive. I want to transfer some of the things from my mac hardrive to the external hardrive. The problem is there are no directions that come with the western digital hardrive to do this. I put in the disk that came with the hardrive but nothing remotely happens, just you're now able to see two files on the disk. When I plug in the hardrive, the mac recognizes it in the disk utility but I don't know what to do from there. Some of the options that I am getting are: partion hardrive, raid, etc. I know this is something simple and I am just not understanding this but I think I must mount the external drive to the computer? please help.....

    Welcome to Apple Discussions!
    It appears your post is being answered in this thread. Please avoid crossposting your question in the future unless asked to because of being in the wrong discussion board:
    http://discussions.apple.com/message.jspa?messageID=2639838#2639838

  • Time capsule vs western digital

    I want to purchase an external hard drive but not sure if I should get Apple's Time Capsule or Western Digital. I'm getting the new 27" iMac Quad. Anyone with suggestions would be helpful and appreciated.
    Thanks
    Ron

    If all you need is an external hard drive, then you may not want to pay the extra cash for a router, which is included in the Time Capsule.
    If you need a new dual band router and also have other Macs that will be backing up, the Time Capsule's shared network drive is a nice feature to have as all computers will back up to the same device.
    If you want the fastest backup speeds available, then you need to look for a FireWire 800 drive, which will connect directly to your computer. Be forewarned though, if you try FireWire 800, you will not want to use anything else.

  • How do I erase an older Western Digital 1TB mirrored hard drive? Newer drives can be erased via a WD Utility, but the WD site says to "ask Apple" about the older ones.

    I have a MacBook Pro with OSX 10.7.5.  The hard drive is approx. six years old - a Western Digital for Macs, mirrored with 1TB on each half. 
    Because the drive is "infected" with Time Machine backups that I can't erase, I have removed all important files from the drive and now want to wipe it clean.  I've done this with new drives, via the WD Utility that came with the drive, but the older drive doesn't have such a utility.  The WD site only has a protocol for PCs. 
    I find nothing on the Apple site itself.  Can you community members help??
    (I've tried various ways of deleting the Time Machine backups, but nothing has worked.  The instructions for that, which I read on a community support site, were too advanced for me to understand.  A Mac IT guy tried to erase the backups, but he didn't know how either.  So that is why I'm erasing the drive totally.  I've learned my lesson and have a dedicated Time Machine drive now.)

    Please be clear:
    This is a mirrored RAID that you use as the startup disk?
    You now have a different startup disk and wish to erase the RAID mirror?
    Do you wish to continue using the RAID for backup?
    If all you want to do is erase the RAID to get rid or the Time Machine backups, the use Disk Utility to erase the mirror disk mounted on the Desktop.

  • Ello, I changed my Imac hard drive which no longer worked. I installed a hard drive Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want

    Hello, I changed my Imac hard drive which no longer worked. I installed a hard drive
    Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want
    install OS X 10.4.2 on the hard drive, I do not see the disk. What is the problem?

    Thanks for the help
    I started on the installation CD OS X 10.4.2, I used Disk Utility
    to partition the disk according to the document that you have proposed. unfortunately
    I have not succeeded. When I partition the disk, even if I called it Macintosh HD, it
    does not keep the name and it shows disk0s3 instead. I did an erase on disk.
    When I mount the disk it tells me that I must repair. When I tried to repair, I got
    the following message:
    Volume check failed
    The underflying task reported failure on exit
    1 HFS volume checked
    1 volume could not be repaired because of an error.
    I also had a message:
    Invalid b-tree node size.
    Note: The disc is new, but it has already been formatted on a computer Imac 27 inch 2011 OS X Lion.
          I used a USB 2.0 to SATA cable to adjust the formatting.
    What to do to fix it?

  • Airport Extreme 802.11n & Western Digital (My Book Essential 1TB)

    I just bought a Airport Extreme 2days ago. I am trying to connect to my external HDD which is Western Digital, My book Essential, 1TB. But I just could not see the HDD on my laptop. The HDD is detected by the the airport utility and shows 930.9GB WD My Book 1110 1032. I have enable file sharing on the device as well. But i just could not see the HDD. I have tried connecting my both laptops wirelessly & using EtherNet Cable, for both options, the HDD is still not visible. Please help me
    Details as below,
    Airport Extreme with firmware version 7.5.1
    Airport Utility, version 5.5.1
    All systems at home are Windows XP with Service Pack 3
    Internet Type: Cable
    HDD details
    Brand & Model: Western Digital, My Book Essential, 1TB
    Format : NTFS
    Network description, Cable modem -> AE -> HDD into the USB of the AE
    All laptop are on wireless.
    I have called up the apple support helpdesk, which they ask me to hold on, but the line was cut off, and no one actually call me back.
    I badly need help to get this working..

    I have the same WD drive on my Airport. In the Airport utility, I have checked the "Enable File Sharing" box. I have selected to share with my Airport Extreme password. Further down the page, the workgroup box is filled in as "WORKGROUP" - I did not have to do this, the Airport seems to have detected it. If you have nothing there, you might want to fill it in.
    On the PC, with File Explorer, expand the tree My Network Places:Entire Network:Microsoft Windows Network:Workgroup. The Airport shows up here. When I click it, I get a prompt for username and password. I use the info from the PC that I use to manage the airport. Then My Book shows up and I can browse it.

  • The hard drive on my 2009 midyear 13" MBP died. I found this on Amazon and want to know if it is a good replacement choice:  Western Digital WD Scorpio Black 750 GB SATA 3 GB/s 7200 RPM 16 MB Cache Internal Bulk/OEM 2.5-Inch Mobile Hard Drive

    The hard drive on my 2009 midyear 13" MBP died. I found this on Amazon and want to know if it is a good replacement choice:  Western Digital WD Scorpio Black 750 GB SATA 3 GB/s 7200 RPM 16 MB Cache Internal Bulk/OEM 2.5-Inch Mobile Hard Drive

    If you are going to upgrade your harddisk, why not upgrade to SSD harddisk. You macbook pro supports SATA II SSD drives acccording to these Specs. SATA III is backward compatible with SATA II, so you can buy SATA III drive if you can't find SATA II drives.
    Upgrading to SATA II SSD drive you give you super fast performence.
    These are a few Segate SSD drives from amazon, that are not that expensive, I guess.
    As for Western Digital vs Segate comparison, I second clintonfrombirmingham's suggestion. Western Digital never works for me.
    *** After the harddisk upgrade
    Install latest OS if possible
    Update your EFI firmware
    and clean NVRAM http://support.apple.com/kb/ht1379

Maybe you are looking for