Is a work 'mode' possible

Hi,
I wanted to know if it was possible to set up a work 'mode' or something similar that I can switch my phone to while I'm at work,
The reason is to save using mobile data
When at work I have things like Outlook, facebook and twitter open on my computer and so don't need them on my phone, but want them on the way home, when I leave my computer
Is there anyway apart from going into the mobile settings and turning off the use data buttons for the individual settings for the apps, to set up a work 'mode' or 'profile' so that they don't eat data while I'm at work - simply?
Hope you can gauge my issue from the above.......
Thanks in advance

Do you need cellular data on at all while at work? If not, you could go to Settings > Cellular and turn Cellular Data to Off. Not as easy as what you are looking for but easier than turning off one app at a time -- if you don't need it on for something.

Similar Messages

Can anybody help with UCCE feature "Work Mode on Outgoing" in Agent Desk Settings

Hi,
my customer wants to have a wrapup time till the agents change their state to "ready" by
themself.
So I have configured the maximum for wrapup time 7200 sec in Agent Desk Settings.
But I have a problem with the feature "Work Mode on Outgoing" in agent desk settings in
ICM 7.5.5.
I think I recognized the function of this feature. It works like that:
- if an agent gets a call via ICM or directly on his phone he will be set into work mode
- if he make a call and the called number answer that call the agent is still on work
mode after he hung up
- but if the called number doesn't answer that call and the agent hangs up his phone he
is in ready/not ready state and that isn't the expected state.
( you can also rebuild this when you go off hook and then on hook again)
The problem is when the agent in state "ready" gets a call via ICM and after he hung up
his phone he is in state "work Ready". Now he makes an outgoing call but this call will
not be answered and if he hangs up his phone he directly gets a new call from ICM because
he was in "ready" state.
Is it possible to set a registry key or do another configuration for that feature "work
mode on outgoing" that it works for every new call even if the call will not be answered?
Cheers,
Tobias

ed_umansky wrote:The proper way to make outbound calls is to first go Not Ready then make a call using the desktop software.
Agreed. In fact, with CAD and CTIOS you cannot make an outbound call when Ready.
Regards,
Geoff

Hello My system version 10.5.8 I have installed Safari update - 5.0.6 and the browser stopped working. At openingit shows the following icon: "Safari has suddenly finished working. Possible problem is in the action of the plugin "TastyAppsAVPlugin".

Hello
My system version 10.5.8
I have installed Safari update - 5.0.6 and the browser stopped working. At openingit shows the following icon:
"Safari has suddenly finished working. Possible problem is in the action of the plugin "TastyAppsAVPlugin".
After deleting all plugins from the folder "Internet Plugin", Safari worked again no problem, BUT all sites with flash content (e.g.YouTube) did not work.
I then tried the following experimental steps:
a) Moved all plugins from the folder "Internet Plugin" into a temporary folder.
b) Downloaded and istalled Adobe Flash Player version 10.3.181.34
c) Started Safari and it did not work ( same message"TastyAppsAVPlugin")
d) Deleted Adobe Flash Player from the folder "Internet Plugin". Safari worked.
e) Moved back all plugins, except Adobe Flash Player, from the temporary folder to "Internet Plugin" folder. Safari works... But Flash won't work!!! Before update to Safari 5.0.6 , ev erything worked perfectly well.
Guys, please solve the problem
Regards
Ruslan Reed
[email protected]

MayaMa --
There are many threads on this. I typed "Uninstalling TastyApps" in the Google search, and came up with these:
http://www.google.com/search?client=safari&rls=en&q=Uninstalling+tastyapps&ie=UT F-8&oe=UTF-8
I do not know which of the many TastyApps haxies you have. Perhaps it would be better to contact them directly, once you know which of their products you have.

Change working mode on X-Fi Titanium Fatality cause system freeze

Hi.
Using X-Fi Titanium Fatality soundcard and latest beta driver. But then I need change working mode (from Game to Audio Creation or Audio Creation to Game) it's cause system freeze. And only hard reset helps. No errors message or error logs in system.
This problem appear only if I played any games in Game mode and after want listen music in Audio mode. If don't play any games or listen music, you can change modes multiple times without problem.
I try clean Windows 7 installation and problem is still here.
Attached log information from Creative System Information.
My computer configuration - http://systemprofile.net/p/1/Kuja
Attached Files
CTSi.zip
(18.4 KB, 0 views)

Sorry but support doesn't monitor these discussion boards. Please use this email form to contact them.

Work Mode

Hello all,
I have been watching the videos on changing mode from personal to work. However when scroll down as shown in the video's noting happens. I can get the buttons to show up to change mode. Is there anything I have to do to make this work?
Many thanks in advance
Pete

the balance mode will be enforced if you link your Z10 to a corporate BlackBerry server.
the work mode in Balance will restrict your device.
Please note that the Balance thing is not about having two personal profiles for you. It is on one hand, your personal device, where you can do whatever you want, and on the other hand, a corporate section with all the corporate restrictions (for example you will NOT be able to copy/paste from one app in one mode to one app in the other mode).
From a general perspective, the Balance feature is useless, except if you are a user that does BYOD (= you accept to have your company enforce restriction on your personal phone).
Balance is about how to deal with corporate restrictions.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Clamshell mode & possible battery issues

Hello everyone!
I just started using my MacBook Air in closed «Clamshell» mode. I bought my MacBook in October and since I got it I read all the advice on how to ameliorate battery performance. I also read that keeping the computer plugged in all the time could damage the battery. As I also noticed, Clamshell mode won't work unless the computer is plugged in continuously (once, I took off the cable and my ext monitor stopped).
So my question lies to these facts; my workflow obliges me to use Clamshell for the most percent of the time (I type and can't use the laptop's keyboard all the time); laptop is needed to be on charge all time; won't this ruin my battery's life?
Thank you in advance!

Apple strongly recommends that you not use the computer plugged in all the time, true. But if you just make sure to use it on battery a couple times a month you'll be okay. Long ago I set a calendar event for one Friday evening a month. It reminds me I need to use the computer on battery during the weekend. My 2009 MBA is now 6 years old with its original battery! which is still getting just above 80% of the full charge it did when it was new. It has just slightly more than 400 cycles which clearly shows that it was used more on power than battery.

[SOLVED] Disabling N mode: possible? (iwl4965)

Hey guys, I have an Intel 4965 802.11abgn wireless card.
I have been getting download speeds significantly lower than what I expect and what I get with Windows Vista on the same machine.
For example, with the easylist.com Arch mirror I usually get about around 1mbps on other computers. With this one, I get between 60-200kbps.
This happened in Vista as well, but I fixed the problem by disabling N mode in a device manager. I guess our router doesn't support it. So, my question is this: is there a way for me to disable N mode under Linux? It'd be great to get my regular download speeds back. Thanks!
Last edited by wirenik (2008-12-05 01:39:17)

lucke wrote:Try loading the module with "modprobe module_name that_option=1" (rmmod it first). If it works, add "options module_name that_option=1" to /etc/modprobe.conf to make it permament.
I did it!
$ modprobe -r iwlagn
$ modprobe iwlagn 11n_disable=1
Now I get up to nearly 2mbps from easynews, and download speeds everywhere else are soaring too. Thanks a million for the help, everyone!

Is forcing Http tunneling mode possible ?

Hello,
in order to make some tests between 2 PC on the same intranet, I would like to know if it's possible to force RMI to use http tunneling, and to choose the mode : http-to-port or http-to-cgi ?
If possible, please tell me how.
Many thanks in advance.
C. BREZAK

RMI depends on custom socket factories (sun.rmi.transport.proxy.RMIHttpToPortSocketFactory, sun.rmi.transport.proxy.RMIHttpToCGISocketFactory) for carrying out the HTTP tunneling of RMI request if normal way of establishing a connection with the remote object fails. If no particular RMI socket factory is set in RMI application, RMI runtime chooses the RMIMasterSocketFactory() for creating client and server sockets. This socket factory maintains a list of socket factories which should be tried in order in establishing a successful connection with the remote object. This list includes RMIDirectSocketFacotry and HTTP tunneling socket factories mentioned above if http.proxyHost proerty is set.
You can force HTTP tunneling by explicitly setting default socket factory (RMISocketFactory.setSocketFactory(...)) to sun.rmi.transport.proxy.RMIHttpToPortSocketFactory in the client application. If this fails you can try setting default socket factory to RMIHttpToCGISocketFactory. It may not be possible trying these two options in the same instance of the program, because setSocketFactory() does not allow you to change the already defined default factory to the new one. This may not be elegant solution.
-- Srinath Mandalapu

Which IOS command allows me to check AP's current working mode?

Hi All,
I would like to know that my AP is working in root mode or workgroup bridge mode. I can check it via web browser. Just curious how to check it via IOS command. Thanks in advance.

Hi Robert,
Perform the "show run interface dot0" command to show the running-configuration for your dot11radio0 interface. Look for the command line that starts with "station-role". This will tell you what role your radio is in.
For example, if it is "station-role root bridge", the radio is configured as a root bridge. If it's just "station-role root", then it's configured as an infrastructure AP.
This is what Rob is saying, but a bit more specific. I don't know of there being a "show" command that states what the radio's role is.
Jeff

Is booting into update mode possible?

Okay...here's the deal. Installed "enhanced kernel (titan) for power users" from my install list in application manager, as part of trying to get the Mobile Hotspot app to work. I was advised to do so by some very knowledgeable N900 users on this forum. Well...long story short(er)...loading the kernel did not make mobile hotspot work, so I decided to uninstall and revert back to the factory kernel. I did so using the "uninstall" app that came with the titan kernel....the screen went blank about half way through the process,...gave me a message that "kernel couldn't be removed". Thereafter, upon rebooting the phone, the N900 just sits there and reboots, reboots, reboots now...never completing a reboot before rebooting again. Sever has informed me that someone might be able to tell me how to reboot into update mode instead of Maemo for flashing....perhaps being able to just flash the kernel instead of the whole OS,...which I'll do if necessary. Anyone want to take this one on? Sure appreciate the assistance ! Thanks in advance.
Solved!
Go to Solution.

Here's the line before I hit enter:
flasher-3.5 -F RX-51_2009SE_10.2010.19-1_PR_COMBINED_MR0_ARM.bin
flasher v2.5.2 (Nov 25 2009)
Here's what came up after I hit enter
SW version in image: RX-51_2009SE_10.2010.19-1_PR_MR0
Image 'kernel', size 1705 kB
Version 2.6.28-20101501+0m5
Image 'rootfs', size 173568 kB
Version RX-51_2009SE_10.2010.19-1_PR_MR0
Image 'cmt-2nd', size 81408 bytes
Version BB5_09.36
Image 'cmt-algo', size 519808 bytes
Version BB5_09.36
Image 'cmt-mcusw', size 5826 kB
Version rx51_ICPR82_10w08
Image '2nd', size 14720 bytes
Valid for RX-51: 2217, 2218, 2219, 2220, 2120
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2217, 2218, 2219, 2220, 2120
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2217, 2218, 2219, 2220, 2120
Version 1.4.14.8+0m5
Image '2nd', size 14720 bytes
Valid for RX-51: 2101, 2102, 2103
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2101, 2102, 2103
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2101, 2102, 2103
Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2307, 2308, 2309, 2310
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2307, 2308, 2309, 2310
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2307, 2308, 2309, 2310
Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2407, 2408, 2409, 2410
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2407, 2408, 2409, 2410
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2407, 2408, 2409, 2410
Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
Version 1.4.14.8+0m5
Image '2nd', size 14720 bytes
Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2113, 2114, 2115, 2116, 2117, 2118, 2119
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2113, 2114, 2115, 2116, 2117, 2118, 2119
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2113, 2114, 2115, 2116, 2117, 2118, 2119
Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2607, 2608, 2609, 2610
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2607, 2608, 2609, 2610
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2607, 2608, 2609, 2610
Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2507, 2508, 2509, 2510
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2507, 2508, 2509, 2510
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2507, 2508, 2509, 2510
Version 1.4.14.8+0m5
Image '2nd', size 14720 bytes
Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2210, 2211, 2212, 2213, 2214, 2215, 2216
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2210, 2211, 2212, 2213, 2214, 2215, 2216
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2210, 2211, 2212, 2213, 2214, 2215, 2216
Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
Version 1.4.14.8+0m5
Nothing to do!
Usage: flasher [OPTIONS]
Options:
  -F, --fiasco=ARG Location of a FIASCO image
  -k, --kernel=ARG Location of kernel image
  -n, --initfs=ARG Location of initfs image
  -r, --rootfs=ARG Location of root JFFS2 image
   --cmt-2nd=ARG Location of CMT FIASCO 2nd image
   --cmt-algo=ARG Location of CMT FIASCO algorithm image
   --cmt-mcusw=ARG Location of CMT FIASCO MCUSW image
   --cmt-no-verify Disable verification of CMT programming
  -x, --xloader=ARG Location of X-Loader image
  -s, --secondary=ARG Location of NOLO secondary bootloader image
  -2, --2nd=ARG Location of NOLO cold flasher ("2nd") image
  -u, --unpack[=ARG] Unpack a FIASCO image
  -f, --flash Load and flash all supplied images
  -l, --load Only load all supplied images
  -b, --boot[=ARG] Boot the kernel with optional cmdline
  -R, --reboot Reboot the board (e.g. after flashing NOLO)
  -i, --read-device-id Print out the device type
  -S, --serial-port=ARG Serial port used for cold flashing or "usb"
  -I, --init-port Only initialize the serial port
  -c, --cold-flash "Cold flash" the device
  -h, --hw-revision=ARG Specify product code and HW revision
   --enable-rd-mode Enable R&D mode on the device
   --disable-rd-mode Disable R&D mode on the device
   --set-rd-flags[=ARG] Set R&D mode flags on the device
   --clear-rd-flags[=ARG] Clear R&D mode flags on the device
   --query-rd-mode Query the device R&D mode status and flags
   --set-hw-revision[=ARG] Set HW revision override on device
   --flash-only=ARG Flash only certain components
  -U, --usb-device=ARG Specify USB device to use (bus:device address)
bash-3.2#
As you can see....nothing about waiting for a suitable device.

Target mode possible?

older MacAIr has failed display (broken hinge) white screen only.
cannot start up with external USB system
how can I use it in target mode so I can get the files off before trashing it?

Possibly > How to use and troubleshoot FireWire target disk mode

Iwlagn ap mode possible?

Hello,
I am currently trying to set my intel 5100 card in ap mode on arch 64 to create a wifi access point, however the results I've had on google seem to indicate that iwlagn does not support ap mode. Can anyone confirm this before I try too much to get it it working?
Thanks

sebokie wrote:
Hello,
I am currently trying to set my intel 5100 card in ap mode on arch 64 to create a wifi access point, however the results I've had on google seem to indicate that iwlagn does not support ap mode. Can anyone confirm this before I try too much to get it it working?
Thanks
I have the same card, and I googled my way to the same conclusion some time ago.

Still trying to find a BT router that works - Mod ...

Had BT Infinity 1 upgraded to 2, installed many moons ago with HH3 and external modem. Internet connection has always been ok but HH3 would never connect without crashing over 2.4Ghz to Apple iPhones. BT sent me both models A & B in attempts to resolve this but in the end I gave up, considered the HH3 not fit for purpose, bit the bullet and bought my own 3rd party router as there was no alternative solution from BT.
My 3rd party router has now failed and, as BT now has alternatives to the HH3, and I've NEVER had a router solution from BT that actually works properly, I'm looking to see if I can now get a solution from BT that should work... Now tempted to move from BT to a competitor which will shave a little off my monthly cost and get me a new router into the bargain.
BT "tech support" said they can only resolve the issue by charging me for a HH5. I don't see why I should have to pay again/more for the original solution BT have *never* been able to get to work, as I consider not being able to connect to an iPhone over standard Wifi without crashing the router as 'not a solution that works'. BT will send be yet another HH3 (!), which I would be fine with if only it worked, but having two so far that don't, just how many times do I have to receive more HH3's before BT find a solution that works/admit the HH3 is NOT a solution!?!
Can the Mods help out here? I'm not demanding a HH5 specfically for free, just a solution that actually works. I really don't think it's reasonable I should have to shell out again for another 3rd party router. I just want a solution that delivers 2.4Ghz and 5Ghz WiFi reliably, which is what BT promised their original solution was supposed to be capable of :-(

wibbly wrote:
Had BT Infinity 1 upgraded to 2, installed many moons ago with HH3 and external modem. Internet connection has always been ok but HH3 would never connect without crashing over 2.4Ghz to Apple iPhones. BT sent me both models A & B in attempts to resolve this but in the end I gave up, considered the HH3 not fit for purpose, bit the bullet and bought my own 3rd party router as there was no alternative solution from BT.
My 3rd party router has now failed and, as BT now has alternatives to the HH3, and I've NEVER had a router solution from BT that actually works properly, I'm looking to see if I can now get a solution from BT that should work... Now tempted to move from BT to a competitor which will shave a little off my monthly cost and get me a new router into the bargain.
BT "tech support" said they can only resolve the issue by charging me for a HH5. I don't see why I should have to pay again/more for the original solution BT have *never* been able to get to work, as I consider not being able to connect to an iPhone over standard Wifi without crashing the router as 'not a solution that works'. BT will send be yet another HH3 (!), which I would be fine with if only it worked, but having two so far that don't, just how many times do I have to receive more HH3's before BT find a solution that works/admit the HH3 is NOT a solution!?!
Can the Mods help out here? I'm not demanding a HH5 specfically for free, just a solution that actually works. I really don't think it's reasonable I should have to shell out again for another 3rd party router. I just want a solution that delivers 2.4Ghz and 5Ghz WiFi reliably, which is what BT promised their original solution was supposed to be capable of :-(
What makes you sure that it's the HH and not your Apple device?
I work with wireless devices all day, every day (I'm a WLAN consultant). I've seen more iDevices cause issues than I've had hot dinners.
The problem is that Apple just don't seem to stick to standards. They'll implement a technology and make some element of that technology work better with other Apple devices than they will with 3rd-party devices.
It's not just limited to Wifi either. They do this with Bluetooth too. I've got a Motorola TK30 Bluetooth Hands-Free system in my car. My Windows and Android phones connect to it perfectly, every time, but my iPhone 4S and my iPad 2 disconnect constantly. When they do connect I have problems making and receiving calls via the 4S and the iPad streams music if it feels like it. I installed the TK30 because my Parrot was... wait for it... not working with my iPhone!!
Sorry, but IMO the HH3 is fit for purpose.

ITunes opens only in safe mode; does not open at all in regular mode (possible solutions that I found to similar problems don't seem to apply)

I haven't been able to open iTunes normally since june when I did the automatic upgrade. I have tried resetting it to an earlier version with no results and have tried everything i could find on apple support in similar problems and nothing seems to be working. When I open my task manager it does show iTunes in the process tab but it doesn't open. When I check my iphone it says that I am not connected with iTunes.
I don't know what to do anymore and I am getting frustrated to the point of changing phones to avoid this problem

No error messages are given. It will either freeze while saying "Accessing iTunes Store," or without saying anything at all.
I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Setting Tooltip on accordion section Does not work. Possible bug??

HI All,
I am using accordion control with following code.
var oAccordion = new sap.ui.commons.Accordion("accordionA");
//Building Section 1
var oSection1 = new sap.ui.commons.AccordionSection( "section1" );
oSection1.setTitle("Section 1kdfjkdasfjsdafffdfjkakfajfajfksafjdkfjdf");
oSection1.setTooltip("Section 1");
oSection1.setMaxHeight("100px");
for (var i=0 ; i < 5 ; i++){
var oCheckBox1 = new sap.ui.commons.CheckBox( "CheckBox1"+i );
oCheckBox1.setText("CheckBox1 "+i);
oSection1.addContent( oCheckBox1);
var oLabel1 = new sap.ui.commons.Label( "Label1"+i );
oLabel1.setText("Label 1 "+i);
oSection1.addContent( oLabel1);
oAccordion.addSection( oSection1 );
Though I am setting the Tooltip. While mouse hover I don't see the tooltip.
My thought is whenever sectionsTitle is truncated it should show the tooltip.
Please clarify when the tooltip will be visibile.
thank you for allyour inputs and help in advance.
regards

Hi there,
It is a bug. You may use the title for each section until they get the tooltips to work.
Regards,
Alejandro.

Is a work 'mode' possible

Similar Messages

Maybe you are looking for