Is-a-wty question ecc 6.0

hello all,
we have an existing industry solution for automotive on 4.6c. we have changed a lot of the code for our needs. now, we are upgrading to ecc 6.0. i have noticed that there has been a lot of changes to the solution.
my question is, does anyone have any insight on all the changes that occurred to the existing system. i noticed, for example, that their are changes to classes that used to create the accoutning documents.
any information would be appreciated.
also, why doesn't the html on the initial screen show any longer (tcode wty).
thanks.

thanks for your help.

Similar Messages

SLT Scenario in question: ECC - SLT- HANA DB

Hello Team,
Issue : I need propose a scenario where we need to recover the data in a table in case of any failure occurs (where point in time recovery is not possible) or there is mismatch in Target database (HANA) when compared to ECC source system.
The following are key constraints:
Re-Replicate the table by stopping the replication and starting again is not an option.
Data from BW is being replicated on real time and customer has mission critical reporting which does not allow downtime.
(in case of re-conciliation issue 1 hr downtime may be allowed as exception)
I have reviewed the documentation available and did not find any clear solution (steps) for recovery. How can we recover in the case of above scenario where replicating the tables again is not an option?
Please provide your viewpoint as this will be helpful in fast tracking the solution.
Regards,
Hemanth Aluri

Hi,
If you cannot recover to the last point in time, you can use the
replication logging feature that is available with the DMIS 2011 SP6.
Replication logging can be switched on for all tables of a
complete configurations via the checkbox ‘Activate Replication Logging’ at
the time when the configuration is created.
The SLT Application Operation Guide describes:
If you need to activate replication logging for an
existing configuration, or if you want to deactivate replication logging, you
need to adjust some entries in the SAP LT Replication Server configuration
tables.
You can also activate or deactivate replication
logging for specific tables if required.
By default the data retention period is 3 days, you
can change this either generally per configuration or individually per table
More details in chapter 6 of the Application Operations Guide: Application
Operations Guide
Best,
Tobias

Can we use NWBC with both SRM and ECC

HI
Can we use NWBC both SRM and ECC . or do i have to use EP .
Thanks,
Pooja

Hi
Hope this will answer your question
ECC Transactions in NWBC Browser SRM 7.0
Thanks,
Ashish

How to recover from scenario in ECC- SLT- BW (ODP/ODQ scenario)

SLT Scenario in question: ECC --> SLT --> BW (ODP/ODQ scenario)
Issue : I need a scenario where we need to recover the data in a table in case of any failure occurs (where point in time recovery is not possible) or there is mismatch in Target database (HANA) when compared to ECC source system.
For e.g. when we are replicating table A having high throughput (1,00,000 records/hr) from ECC to SLT. We find during reconciliation that records are not matching. We want to recover the data from ODQ for last 2 days (data retention set to 10 days).
The following are key constraints:
·       1. Re-Replicate the table by stopping the replication and starting again is not an option.
·        2. Data from BW is being replicated on real time and customer has mission critical reporting which does not allow downtime.
     (in case of re-conciliation issue 1 hr downtime may be allowed as exception)
I have reviewed the documentation available on SLT (operation manual) but did not find any clear solution / recommendations (steps) for recovery from ODP/ODQ scenario.
How can we recover in the case of above scenario where replicating the tables again (stop and start replication) is not an option?
Please provide your viewpoint as this will be helpful.

Hi,
Please fallow that link: http://en.wikipedia.org/wiki/RTFM
/wg

Exact Steps to Generate Installation keys for other systems In SolMgr4.0

Hi friends,
Please provide me exact Steps to Generate Installation keys for other systems In SolMgr 4.0 SR1.
I have steps to make this thing in solmgr 3.2 as please change as it in solmgr4.0 sr1
txn SMSY
Expand Landscape components -> Systems
Right click on Systems ->New System
Type SAPID, & Installation No. (S44 , 0040099252) & sAVE
Expand Newly Added system
Right Click & Create
Now we can use the key provided by the system.
Please make required changes as applicable in solmgr4.0 So that I can proceed.
Also clear vat is the difference between ECC & ERP as solmgr4.0 mention both as two systems.
Thanks & regards
Jaswant
+91 9949676055
Cheers 'N' Joyce

Hi Jaswant,
to generate a Solution Manager Key you can process a little bit easier.
Call transaction SMSY, press shift+F5 (you get the "other objects" popup).
As System enter the SID of your Solution Manager.
->select gen.Installation/Upgrade Key (shiftctrlF10))
then you get a new popup. In this popup you DELETE all values, enter SID of the new system, the message server of the new system and the system number of the new system. Then press generate key.
With this procedure you do not have to add the system to SMSY to generate the key.
Later you should add it to SMSY, maybe you have added an SLD to SMSY then the system will be added automatically. If not you have to add it manually.
Second question ERP <> ECC
Good question, ECC is part (a main instance) of ERP, so it is up to you if you classify your system as an ERP or ECC.
Regards,
Udo Lang

Question for installing Solution Manager & ECC 5.0

Any idea for installing Solution Manager 3.2 on Windows server 2003 with Oracle9i problem when install Database Instance. Installation failed when the intallation progress went to Oracle Post-Load Action.
The message from startsap log file is
"running C:\usr\sap\T01\SYS\exe\run/sapstart.exe name=T01 nr=03 SAPDIAHOST=saptest02 -Wait
start service SAP01_03 on machine
saptest02
OpenService of SAPT01_03 failed. Error#: 1060
CreateNamedPipe for
saptest02\pipe\SAP01_03 Failed, Extended Error #2
start service SAP01_03 on machine
saptest02
OpenService of SAPT01_03 failed. Error#: 1060
C:\usr\sap\T01\SYS\exe\run/sapstart.exe=>sapparam(1c): No Profile Used."
Another question is about installing the Oracle database software: should we choose Create Databse or not when install Oracle Server Software only?
Is my installation process as following correct?
->SELECT A PRODUCT TO INSTALL:
Oracle9i Database 9.2.0.1.0
->WHAT TPYE OF INSTALLATION DO YOU WANT:
Enterprise Edition
->SELECT A DATABASE SUITED TO YOUR NEEDS:
Software only
After end of installation
install Oracle9i Client 9.2.0.1.0->Administrator
Thanks a lot

Hi Shusen, I´m trying to do the same think (Install ECC IDES with Oracle 9i in one computer for educational propose), can you help me with this:
1.I made the same Oracle install process because when I tried with sapserver.cmd nothing happened, for that reason i made:
SELECT A PRODUCT TO INSTALL:
Oracle9i Database 9.2.0.1.0
->WHAT TPYE OF INSTALLATION DO YOU WANT:
Enterprise Edition
->SELECT A DATABASE SUITED TO YOUR NEEDS:
Software only
After end of installation
I did not install client, is this correct?
2.After install this, I run the sapins.exe but show me this error: INSTALL FIRST SAP J2EE ENGINE, I download the JAVA SDK from JAVA page (java_ee_sdk-5-windows) but did not fix the problem: Do you know what file is this? Or, where is it in the DVD installation?
Thanks in advance if you or somebody can help me and excuse me if the answers are obviously, but I´m not a system engineer I´m only try to install IDES for learn SAP WM.
Thanks.

Interview questions on upgrades from 4.7 to ECC

Hi,
Can any one please post some potential areas/questions that will be asked for upgrade projects from 4.7 to ECC6.0
Points will be awarded.
Thanks

Hi Frank,
this is good question, why because sap upgrades from 4.6b to ecc 6.0 is very risky.
take one example , in 4.5b , me21n application having 620 screen where as in ecc 6.0 having 9000 screen . that time we will take care of it.
check the obsolete function modules , 4.5b , having ws_upload, ws_download.... use cl_gui_frontend_services , under these having differnt type of methods.
once you change the code in ecc , go to tranx : SLIN check the error where it is exact.

BI switching to new ECC 6.0 box from R/3 4.7 box, question on delta init?

Hi all,
Our BI has been already upgraded to 7.0. Currently connected to R/3 4.7.
Now a new box is made with ECC 6.0 and Oracle 8 which is a mirror copy of the r/3 4.7.Once the new box is ready the BI 7.0 connection will be switched from R/3 4.7 to the new box ECC 6.0.
My question is ...
In the R/3 4.7 the datasources were already initialized for delta..so the pointer for delta was already setup.
Now when we connect the new ECC box do I have to initialize delta again ? or would the new system recognize the pointer since it is a mirror copy from the old system?
pls advice

It´s a bit confusing what you write - I try to get your point:
- your 4.7 is running on Oracle 8 (VERY old, unsupported)
- you install a NEW system on ERP 6.0? Or do you upgrade your 4.7 copy?
Markus

BI switching to new ECC 6.0 box from R/3 4.7, question on delta init?

Hi all,
Our BI has been already upgraded to 7.0. Currently connected to R/3 4.7.
Now a new box is made with ECC 6.0 and Oracle 8 which is a mirror copy of the r/3 4.7.Once the new box is ready the BI 7.0 connection will be switched from R/3 4.7 to the new box ECC 6.0.
My question is ...
In the R/3 4.7 the datasources were already initialized for delta..so the pointer for delta was already setup.
Now when we connect the new ECC box do I have to initialize delta again ? or would the new system recognize the pointer since it is a mirror copy from the old system?
pls advice

Hi,
you would have added the new ECC source system to the BI.
I that case I think you need to initialize the Data again.
As all other requirements for delta like the pointer in delta queue might not be set for the new datasources.
I havent tried such thing till. but as per the concepts I understand You need to initialize the data
Regards
Praeon

ECC 6.0 Questions on New Business Partner Standard Address Functionality.

Hello.
We are upgrading our client from 4.72 to ECC6.0 and in the UAT testing phase.
Where before in 4.72 the Standard Mailing address was determined by a simple radio button, it appears that they have gone to a time dependent type of format which is causing issues with our client.
I have a few questions surrounding this piece.
1) Enabling 'Address Usage' : On the Address Overview Tab in FPP2/FPP3, How can we enable the 'Address Usage' box that is under the 'Address Overview' Box?
2) Determining Standard Address on Address Overview: For accounts brought over in the upgrade, the Valid From/Valid To Dates on the Address Overview are defaulted 01/01/0001 to 12/31/9999. How can the user now tell which is the default address without having to go to the Address Tab?
3) Reversing Standard Address Change: Our client has a business scenario that occurs often in which the a customer may call in to change their Standard mailing address. Then the customer calls back at a later time and decides they wanted to reverse back to the original address. We have gone through this scenario using the Move button to move in the new address, which changes the standard address, then subsequently use the Move > Reverse functionality. It appears to change the on the Address overview tab but does not save on the Address Tab.
4) Effective Date Change: In 4.72 the client had the ability to change any characteristic of the BP on a certain day. For example wanting to change the Standard address, Name, Phone on a day in the future. So they would pick that day in the future, and the planned change would occur on that day. We cannot find that functionality in the current ECC 6.0.
Any guidance would greatly be appreciated! Thanks in advance!
Regards,
Eric

Hi Nick,
Did you get the answer? I'm lookinf for the same information about profiles.
Thanks!!

Question about BADI FI_AUTHORITY_ITEM in ECC 6.0

Dear all,
To control the authorizations of users to display the document line items, I have created a Business Add-In Implementation "Z_FI_AUTHORITY_ITEM" with BADI FI_AUTHORITY_ITEM in SAP R/3 4.7.
The BADI worked correctly in SAP R/3 4.7.
Recently, we are upgrading my SAP from 4.7 to ECC 6.0. After upgraded, I found that the BADI doesn't called when displaying the documentline item. The status of the BADI is active. I have also tested in debug mode, it seems that it doesn't get into the BADI coding.
Can I ask how to solve this problem?
Thanks
Sunny

Hi Sunny,
I hope the following links should be able to answer your questions:
http://wiki.sdn.sap.com/wiki/display/Snippets/CreatealinkbetweenClassicBAdIandEnhancementspot
http://www.sapdev.co.uk/enhance/eframework/ef_implicit.htm
http://blog.csdn.net/conworld/archive/2009/04/01/4040658.aspx
Regards,
Warren.

ECC 5.0 and CRM 7.0 Integration Questions

Hello,
We are on ECC 5.0 and are part of a global implementation that is putting in CRM 7.0.
We have a couple of issues/questions.
1. We want to integrate ECC Internal Orders with CRM Contracts and Orders. However we don't see the ECC Internal Order type SAPS in ECC 5.0. What release/plugin would give us SAPS Internal order type
2. We currently use CS and PM in ECC, and we have equipment and func. locations. Do we need to be on a certain version/plugin to integrate Equipment and Func. Locations with CRM iBase?
3. Any tips/suggestions on integrating Vertex with CRM for taxes.
Thanks
chris

Hi
Here are the Answers
1. We want to integrate ECC Internal Orders with CRM Contracts and Orders. However we don't see the ECC Internal Order type SAPS in ECC 5.0. What release/plugin would give us SAPS Internal order type
- This is release indepedant- It is been available from R/3 4.7 so you should have it, if you dont have an SAPS order type, you have 2 options
1. Create your own SAPS Order type
2. Define RFC from Client "000" and push the order type. This must be available in "000" as a standard delivery, may be your Basis did not move the order types properly.
2. We currently use CS and PM in ECC, and we have equipment and func. locations. Do we need to be on a certain version/plugin to integrate Equipment and Func. Locations with CRM iBase?
Yes you can have the equipment and Functional Locations, but for FLocs to download to CRM you need ECC6.0 with Sp6 anything below cannot be integrated or downloaded with CRM7.0 .. for Equipments any versions are fine and you do all configuration and customization in CRM
3. Any tips/suggestions on integrating Vertex with CRM for taxes.
Its a broad question, SAP provides standard integration option to vertex, and you integrate as needed..
let me know if you need anything else.

Questions regarding HR Org Structure replication from ECC to SRM

Hi Experts ,
We have SRM7.0 ( SP08) with ECC6 ( Ehp4) having Classic Scenario .
I managed to replicate entire HR Org Structure from ECC system to SRM system. I replicated O (Organization), S( Postion) and P ( Person), which successfully created O, S and CP in SRM with BP for O and US...Refered Note 934372, 312090, 550055 and help link on SDN./wiki.....etc
Now I have below questions in mind.
1. In SRM we requiers Org unit for Company Code, Purchase Organization and Purchase Group...which we set in FUNCTION tab for the requiered Org Unit with Checkbox and value of it and Logical system.....but in HR Org strcuture we do not have such Org Unit....so how to manage/create such these Org Units ( i.e.Company Code, Purchase Organization and Purchase Group ) ?...
Do I need to create these Org unit manually in SRM in PPOSA_BBP ? If yes, can I create these Org Unit above or between these replicated HR Org Units or I need to created it separtly in paralllel to these HR replicated Org Units?
2. If above I do, then what will impact on the delta /change replication from HR integraion ?
3. In ECC HR org Structure there are hundres of employee, out of that I just wanted to send the Postion ( we have postion based security in HR) whom only SRM Role had assigned . How it can be acheived ?
Will appricaite detail reply/suggestions
Thanks
NAP

Hi ,
Initially when I repliacted P of HR Org Struture it sucessfully craeted BP in SRM and was CP in Org Structure.
But suddenly , what happned don;t know, when I replicating Employees (P) in SRM , it is assigning to respective Postion (S), but BP is not creating in SRM and in the USERS_GEN for this User, its postion and ORg Unit to whom it assigned is giving below error
Determination of connections to object 'BP' of 'CP' '00000015' failed
Message no. BBP_UM_UI036
I checked all this as per Note 550055, 934372..etc....checked respetcive setting in table T77S0...I checked address alos....but no any clue......IDoC in SRM posting sucessfully....
Can anyone please suggest what should be the cause and solution of it ?
Thanks
NAP

ESS/MSS Upgrade from 4.6 to ECC 6.0 Question..

Hi Gurus,
During the upgrade SAP R/3 would be upgraded from 4.6C to ECC 6.0. The HR module on this R/3 has - Org Management, Benefits, Time Administration and Payroll. They use ESS based on ITS. My question is when they go from 4.6c to ECC 6.0 - would they have to let go the ITS based ESS transactions and go with Web Dynpro based ESS? If yes then what happens to all the customizations they have done to ITS based ESS transactions. Would they have to be redone on the Web Dynpro based ESS?
Thanks,
Soniya Singh

yes You need to do different customisations for the Web dynpro since ECC 6 is better with WD, ITS functionality wont work here. Please check the training material for the MSS which is very exhaustive.
But if you continue to use ITS then your old customisation should work but then again there will be changes..better to move wholly to WD

Sets of Question Papers and answers for SAP ECC 6.0- FICO Module

Hi,
If anybody has some material on sets of question papers and answers of SAP ECC 6.0 FI- CO Material please mail the same on [email protected]
Useful replies will be awared points.
Regards
Milind Nair

Hi,
Please refer the below link and reward if helpful.
http://help.sap.com/saphelp_nw04s/helpdata/en/e5/de86f335cd11d3acb00000e83539c3/content.htm

Is-a-wty question ecc 6.0

Similar Messages

Maybe you are looking for