Is Acrobat not part of CS5?

I purchased CS5 Master Collection (Student Edition) and was able to install and use all the software included in it with the serial key provided but I am unable to use that serial key to register Acrobat, is there a seperate serial key i'm missing or is Acrobat not included in CS5 Master Collection?

As Acrobat 9 is part of CS5 Master you ought to be able to use it.
fwiw -
From an Adobe knowledge base article for CS5 install:
(CS5 Master Collection only) Install Acrobat 9 Pro from disc
If you already have Acrobat 9 Pro, either as part of a suite or as a standalone component, you do not need to reinstall it. Existing Acrobat 9 Pro users should download and install the most current updates for Acrobat 9 Pro. To check for updates, open Acrobat 9 Pro, and choose Help > Check For Updates.
If you have Acrobat 8 or earlier installed on your computer, you must uninstall it before you can install Acrobat 9 Pro.
1. Uninstall Acrobat 8:
    • (Windows XP) Open the Windows Control Panel and double-click Add or Remove Programs.
     Select the product that you want to uninstall, click Change/Remove, and then follow the onscreen instructions.
    • (Windows Vista and Windows 7) Open the Windows Control Panel and double-click Programs and Features.
      Select the product that you want to uninstall, click   Uninstall/Change, and then follow the onscreen instructions.
2. Insert the Adobe Acrobat 9 Application DVD into your drive, navigate to the root directory, and double-click Setup.exe.
3. Follow the onscreen instructions to install Acrobat 9 Pro.
4. When prompted to enter a serial number, enter your Adobe Acrobat 9 Pro serial number and complete the installation.
Be well...

Similar Messages

I am unable to print only the first few lines of an e-mail. Also, it will then print in a very small type and will also include extraneous information on the screen that are not part of the e-mail. Is there anything I can do about this annoying problem?

I can only print the first few lines of an e-mail, even when it is on "Full View" on my screen. Moreover, it prints with very small print that is hard to read and also contains additional material on the screen that is not part of the e-mail.
== This happened ==
Every time Firefox opened
== Since the first day I started using Firefox

I talked to Adobe Support tonight and found this issue to be a known problem with some of the Adobe Cloud products when using older hardware, in this case the C782.
So, we found a workaround. Unfortunately the work around isn’t efficient and adds more steps to their normal printing routine
Open InDesign and create, modify delete the card
Select FileàExport
A window will appear. Pick the location you wish to save the file
Once the File is saved another window will appear
“EXPORT Adobe PDF”
An Export to Adobe PDF window will appear. Accept all defaults. MAKE CERTAIN “VIEW PDF
After EXPORTING” is CHECKED
Select Export
Once EXPORT is complete the file will open automatically in Adobe Acrobat
Most likely the screen will be very large
Select the + - sign at the top of the page to adjust the page size to view the image
Select FileàPrint
The Print window will appear
Select the printer from the drop down
# of COPIES is just below Printer
Select OK
I hope this helps anyone who is having similar issues
Thanks

Unable to open newly installed free standing Lightroom not part of CC

I have an Adobe CC photography membership and I've installed PS and LR on two computers from the membership. I also purchased a version of Lightroom 6 (not part of the membership) to install on a third computer for which I received a serial number. However, I am not able to open the program because I get a message stating that my CC software is already installed on two computers. This version of Lightroom that I purchased separately from CC subscription hasn't been unstalled on any computer! It's a free standing version. Yet, I can't install it because I also have a CC membership. It's ridiculous. I had no problem installing a free standing version of Lightroom 5 on this same computer (also with a separate serial number). Why can't I get Adobe to recognize the difference in the two types of Lightrooom...the one from CC subscription and the other having nothing to do with my CC subscription?
Thanks,
Chick

Lightroom CC was NEVER installed on this computer. In fact NO CC programs were ever installed on this particular computer except the Adobe CC application itself (Adobe installed it automatically when I plugged in my User ID for updating one of the other (NON-CC) Adobe programs on the computer (CS5 suite). A perpetually licensed version of Lightroom 5 was also installed on this computer (and I had no problem installing that).
I eventually created a new Adobe ID and password and retried to install it using that ID and password but the installer said I needed an Adobe CC membership to continue the installation. So, I contacted Adobe and after two hours with an online support person (Live Chat), which was getting me nowhere, I decided to use a new ID but install as a trial.During the install, I made sure no adobe apps were running and deleted the preference file for the CC application (which also wasn't running). The program finally installed as a trial version. I then closed the program, restarted, and a screen came up telling me I had 30 days left on the trial. There was also an option to license the software on that screen. I chose the latter and....another screen came up asking for a serial number, which I provided. And now the program is installed and is associated with a different Adobe ID and password from the programs I have on two other computesr that have CC applications installed.
That's the solution I came up with. It worked but installation should have gone much smoother, as it did last year when I installed the perpetually licensed version of Lightroom which was associated with the same user ID and password as I used for the CC subscription.

Excel Pivot (molap) will not refresh from an SSAS box that is not part of the Farm

I have spent hours trying to get this working going through many links. One of the best ones is this.
http://whitepages.unlimitedviz.com/2010/12/connecting-to-cubes-and-external-data-with-excel-in-sharepoint/
However even after doing all of this it is still not working. Here is my set up. I have a sharepoint 2013. I am trying to connect to my DW SSAS server that is on a different domain and not part of the farm. Everything else seems to
work but excel. I have power view connecting and creating great reports with refesh working perfect. I have performance point working. I have Reporting Services working. We installed adventureworks on the local SSAS farm version and
excel is working with this and refreshed just fine. I can ceate and excel report and save it to sharepoint but when I open it I get the famous error.
An error occurred during an attempt to establish a connection to the external data source. The following connections failed to refresh:
I can open in excel and then refresh all from excel and all works fine. I do not want my users to have to go through this. They should be able to use excel in sharepoint. Any ideas on what I am missing. I have tried to follow exactly
what the link above says but still not working.
Ken Craig

The first article is checking to make sure power pivot is installed and local ssas is running. This could not be an issue since like I mentioned I can create a Excel report to the local farm version of ssas and it opens and refreshed fine. That
would mean that power pivot is installed and the services are running right:)?
The second article I have done over and over and I am pretty sure this works. Again I can export to excel and it works just fine meaning my Data source is valid right? yes I have chosen "none" as well.
The third article talks about the different viewers. Mine is using
xlviewer.aspx so I would assume this is not the issue.
Here is what I am seeing in the logs but I am not sure what they are saying. I used uls view somewhat like you would profiler. I started it tried to open excel and then stopped it. Below are logs that look like they pertain to this action.
ConnectionManager.GetConnection: Failed to create new connection, exception=Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException: Exception of type 'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException' was thrown.
at Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInterop.InitConnection()
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.<>c__DisplayClass8.<CreateConnection>b__5()
at Microsoft.Office.Excel.Server.CalculationServer.CredentialsTrustedSubsystem.TryExecuteImpersonated(ExecuteImpersonatedMethod method)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.CreateConnection(Credentials credentials, ConnectionInfo connectionInfo, Int32 keyLcid, Uri workbookUrl, Boolean auditConnection, SessionId sessionId), sessionId=1.V23.297S76/z2k/Evl+S78bqiKj14.5.en-US5.en-US36.5a800c6f-758b-44e2-a092-e592f15e09771.A1.N,
connectionString=Provider=MSOLAP.5;Integrated Security=SSPI;Persist Security Info=True;Data Source=BIL-BIRSTDB\ASADMIN;Initial Catalog=Ecomm OLAP pool count=0
ConnectionManager.GetConnection: Caught an exception: Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException: Exception of type 'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException' was thrown.
at Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInterop.InitConnection()
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.<>c__DisplayClass8.<CreateConnection>b__5()
at Microsoft.Office.Excel.Server.CalculationServer.CredentialsTrustedSubsystem.TryExecuteImpersonated(ExecuteImpersonatedMethod method)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.CreateConnection(Credentials credentials, ConnectionInfo connectionInfo, Int32 keyLcid, Uri workbookUrl, Boolean auditConnection, SessionId sessionId)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.CreateConnectionAndAddToList(ConnectionRequest connectionRequest, ExtendedConnectionInfo extendedConnInfo, Credentials credentials, Boolean auditConnection, Int32 keyLcid, ConnectionKey
connectionKey, AutoReaderWriterLock autoPoolLock, Connection& connection, ConnectionList& connectionList)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.GetConnection(ConnectionRequest connectionRequest, ExtendedConnectionInfo extendedConnInfo, Credentials credentials, Int64 privateConnectionId, Boolean auditConnection)
Refresh failed for 'BIL-BIRSTDB_ASADMIN Ecomm OLAP Report' in the workbook 'http://eagleviewportal/BusinessIntelligenceCenter/Templates/Ecomm Report Power Pivot Default.xlsx'. [Session: 1.V23.297S76/z2k/Evl+S78bqiKj14.5.en-US5.en-US36.5a800c6f-758b-44e2-a092-e592f15e09771.A1.N
User: 0#.w|hqeagleview\ken.craig]
ExternalSource.ValidateConnection: Unable to get a connection: Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException: Exception of type 'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException' was thrown.
at Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInterop.InitConnection()
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.<>c__DisplayClass8.<CreateConnection>b__5()
at Microsoft.Office.Excel.Server.CalculationServer.CredentialsTrustedSubsystem.TryExecuteImpersonated(ExecuteImpersonatedMethod method)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.CreateConnection(Credentials credentials, ConnectionInfo connectionInfo, Int32 keyLcid, Uri workbookUrl, Boolean auditConnection, SessionId sessionId)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.CreateConnectionAndAddToList(ConnectionRequest connectionRequest, ExtendedConnectionInfo extendedConnInfo, Credentials credentials, Boolean auditConnection, Int32 keyLcid, ConnectionKey
connectionKey, AutoReaderWriterLock autoPoolLock, Connection& connection, ConnectionList& connectionList)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.GetConnection(ConnectionRequest connectionRequest, ExtendedConnectionInfo extendedConnInfo, Credentials credentials, Int64 privateConnectionId, Boolean auditConnection)
at Microsoft.Office.Excel.Server.CalculationServer.ExternalSource.TryGetValidatedConnection(Request request, ConnectionRequest connectionRequest, ExternalDataScenario scenario, Credentials credentials, ExtendedConnectionInfo extendedConnectionInfo, Int64
privateConnectionId, Boolean shouldReportFailure, Connection& connectionOut). sessionId=1.V23.297S76/z2k/Evl+S78bqiKj14.5.en-US5.en-US36.5a800c6f-758b-44e2-a092-e592f15e09771.A1.N, externalSource=BIL-BIRSTDB_ASADMIN Ecomm OLAP Report
ExternalDataUtility.ExecuteOperation: We exhausted all available connection information. Exception: Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException: Exception of type 'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException'
was thrown.
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionInfoManager.GetConnectionInfo(Request request, String connectionName, ExtendedConnectionInfo extendedConnInfo, Boolean& shouldReportFailure)
at Microsoft.Office.Excel.Server.CalculationServer.ExternalDataUtility.GetExtendedConnectionInfo(IExternalDataObject extObject, ConnectionInfoManager connectionInfoManager, Request request, Int32 externalSourceIndex, Boolean ignoreErrors, ExternalDataScenario
scenario, Exception& lastException, Boolean& shouldReportFailure)
at Microsoft.Office.Excel.Server.CalculationServer.ExternalSource.GetConnection(ExternalKey externalKey, Int32 externalSourceIndex, ExternalQueryKey externalQueryKey, ConnectionRequest connectionRequest, Int64 privateConnectionId, ExternalDataScenario scenario,
Boolean prepare), Data Connection Name: BIL-BIRSTDB_ASADMIN Ecomm OLAP Report, SessionId: 1.V23.297S76/z2k/Evl+S78bqiKj14.5.en-US5.en-US36.5a800c6f-758b-44e2-a092-e592f15e09771.A1.N, UserId: 0#.w|hqeagleview\ken.craig
Ken Craig

I'm trying to get into game center to download some things. Enter user id/password then keep getting a "you are not part of this/the administrator group" then a cancel or retry command. What do I do? (I am using a friends wi-fi) What d

I am trying to get into the Game Center and download some apps. I enter my user id/password the keep getting a "you are not part of the/this administrators group" message then a cancel/retry command. What do I do to become part of this/the administrators group? I am using a friend's wi-fi...Help!

I am trying to get into the Game Center and download some apps. I enter my user id/password the keep getting a "you are not part of the/this administrators group" message then a cancel/retry command. What do I do to become part of this/the administrators group? I am using a friend's wi-fi...Help!

HT2513 I can't delete events recurring annually...not part of birthday calendar, one's I've added manually. I've tried delete key, cut event, changing to no recurrence, they just revert to original recurrence and will not be removed from my calendar. Th

I can't delete events recurring annually...not part of birthday calendar, these are events I've added manually. I've tried delete key, cut event, changing to no recurrence, they just revert to original recurrence and will not be removed from my calendar. Events that occur weekly I'm able to delete, this is only happening with events recurring annually. Very frustrating. Thanks for any ideas.

If you are using a PC, log on to iCloud using Safari (rather than Explorer) to reset the photostream. Then turn iPhone/iPad photostream off and back on. I was getting the same server error as you and this advice from another blog worked for my iPhone and iPad. But I still can't get photostream deleted from my apple tv. There does not seem to be a photostream on/off control In Apple tv 4.4 software. I tried switching the screen saver to one of the ones that comes preloaded on the device, then back to photostream but all the old photos are still there. If anyone can help with this, I would appreciate it.

A device which is not part of this management group has attempted to access this Health Service.

Has anyone found an answer to this yet? I have uninstalled/reinstalled the agents both manually and through the push. Rebooted the client, rebooted the sce server. Forced the group policy to reapply, forced the health agent to /reportnow and I still get the error. The client shows up under the agent managed section but under the health state column it shows not monitored. The clients can ping the SCE server by FQDN and RDP to it as well so name resolution is working fine.
On the the SCE server I get this in the log
Event Type: Information
Event Source: OpsMgr Connector
Event Category: None
Event ID: 20000
Date:  6/25/2009
Time:  10:09:40 AM
User:  N/A
Computer: *******
Description:
A device which is not part of this management group has attempted to access this Health Service.
Requesting Device Name : *****
And this
Event Type:            Information
Event Source:           OpsMgr Connector
Event Category:       None
Event ID: 21042
Date:                        6/25/2009
Time:                       10:25:14 AM
User:                        N/A
Computer:                ***********
Description:
Operations Manager has discarded 1 items in management group Servername_MG, which came from $$ROOT$$. These items have been discarded because no valid route exists at this time. This can happen when new devices are added to the topology but the complete topology has not been distributed yet. The discarded items will be regenerated.
On the client I get
Event Type: Error
Event Source: OpsMgr Connector
Event Category: None
Event ID: 20070
Date:  06/25/2009
Time:  10:06:13 AM
User:  N/A
Computer: ******
Description:
The OpsMgr Connector connected to ****** but the connection was closed immediately after authentication occured. The most likely cause of this error is that the agent is not authorized to communicate with the server, or the server has not received configuration. Check the event log on the server for the presence of 20000 events, indicating that agents which are not approved are attempting to connect.
And this as well
Event Type:            Error
Event Source:           OpsMgr Connector
Event Category:       None
Event ID: 21016
Date:                        06/25/2009
Time:                       10:06:18 AM
User:                        N/A
Computer:                ******
Description:
OpsMgr was unable to set up a communications channel to **** and there are no failover hosts. Communication will resume when ******* is both available and allows communication from this computer.
And this
OpsMgr has no configuration for management group Servername_MG and is requesting new configuration from the Configuration Service.

Hey Nathan,
Yea I have sent the script to eveyone that has aked for it. I dont know if its helped anybody else as none has given me any feedback either way.
I guess I can post it here for everyone to use.
Please keep in mind that if you use this script from MS its at your own risk, If your DB blows up, massive catastrophic failure ensues and so forth ITS YOUR OWN FAULT. MAKE SURE YOU HAVE GOOD BACKUPS
Step 1) Run this against your SCE 2007 DB
DECLARE @BaseManagedEntityInternalId int
DECLARE @BaseManagedEntityId uniqueidentifier
DECLARE @ViewName sysname
DECLARE @Statement nvarchar(max)
SET @BaseManagedEntityInternalId = 0
WHILE EXISTS (SELECT * FROM BaseManagedEntity WHERE (BaseManagedEntityInternalId >
@BaseManagedEntityInternalId))
BEGIN
SELECT TOP 1
@BaseManagedEntityInternalId = bme.BaseManagedEntityInternalId
,@BaseManagedEntityId = bme.BaseManagedEntityId
,@ViewName = met.ManagedTypeViewName
FROM BaseManagedEntity bme
JOIN ManagedType met ON (bme.BaseManagedTypeId = met.ManagedTypeId)
WHERE (bme.BaseManagedEntityInternalId > @BaseManagedEntityInternalId)
AND (bme.IsDeleted = 0)
ORDER BY BaseManagedEntityInternalId
SELECT @Statement = 'IF NOT EXISTS (SELECT * FROM ' + QUOTENAME(@ViewName) + '
WHERE BaseManagedEntityId = ''' + CAST(@BaseManagedEntityId AS varchar(50)) + ''')
PRINT ''' + CAST(@BaseManagedEntityId AS varchar(50)) + ' ' + @ViewName + ''''
EXECUTE(@Statement)
END
STEP 2)
If your problem was the same a mine you should get some GUID’s returned. (For example 93790c0B-09C4-3A4D-CE72-F4E3Dd917D78 MTV_DeploymentSettings)
Using the GUID that we got in the output file
Execute the below given query:
==========================
select fullname
from basemanagedentity
where basemanagedentityid = ‘<GUID>’
==========================
Verify that the device or the object mentioned in the above output is not displayed in Operations console.
Only in case if the object is not displayed then use the below given query to delete it from database.
==========================
update basemanagedentity
set isdeleted = 1
where basemanagedentityid = ‘<GUID>’
==========================
Before executing the above query please ensure that you have the backup of the database. Also note that you need to run the above said query only incase if you do not see the object in the Operations console.
After executing this query, run this stored procedure:
==========================
exec p_Detectandfixinstancespaceinconsistencies
==========================
Once it is done:
> Stop all the three OpsMgr services: health, Config and SDK on Management Server
> Cleared the health service state folder.
> Start all the three OpsMgr services: SDK, Config, and health on Management Server.
> Wait for 30 minutes and see if the agents start getting monitored.
I hope this helps everyone

SharePoint 2013 web service: Error while sending claim based authentication request (The corresponding SID in the domain is not part of the intended account type)

We are using .asmx services for SharePoint features such as comments, and rating.
Service
Feature used
http://<<hostname>>/_vti_bin/socialdataservice.asmx
Commenting, Rating
http://<<hostname>>/_vti_bin/UserProfileService.asmx
For out of box workflows
In SharePoint 2013,
SharePoint – 80 web application is on claims based mode and user is logging in with windows authentication. With logged-in client context used to call SharePoint's default web service, we are getting below error message from
web service (Social data and user profile services).
Server was unable to process request. ---> The corresponding SID in the domain is not part of the intended account type.
When the service is accessed using console application with Visual Studio credentials (logged in user), we are able to access the service. Below is the code snippet
using (SocialDataService
service = new
SocialDataService())
service.Credentials =
CredentialCache.DefaultCredentials;
SocialCommentDetail detail = service.AddComment("<<url>>",
"Test Comment",
null,
null);
Are SharePoint 2013 web services not supporting request coming with claim based authentication web application?
Thanks, Pratik Agrawal (MAQ Software)

While this applies to 2010, I believe the same is true with 2013:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/925e5f46-317f-46d3-bc55-c67f07eb2372/call-sharepoint-web-services-using-claimbased-authentication?forum=sharepointgeneralprevious
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

My Mac is a 21.5-inch Late 2009 with a 1 TB Seagate HD that must be replaced, according to Apple support, but they denied me that right because the serial is not part of the replacement program: any suggestions to get a plausible solution to this problem?

My Mac is a 21.5-inch Late 2009 with a 1 TB Seagate HD that must be replaced, according to Apple support Panama, but they denied me that right because the serial is not part of the replacement program: any suggestions to get a plausible solution to this problem?
I would want to know what are the criteria used by the people al espresslane support to deny the opportunity presented by the replacement program, given the situation that these 1 TB Seagate HD´s have had problems and certainly not only in the batch they accepted, but probable in other batches too.
The second question is about the powerpc support that is lost when updating from Snow Leopard to Lion X: I can not read my medical application UPTODATE.
I hope that there wil be some kind of support to help me solve that problem, this is my first petition actually.
Now, I do not have access to my yahoo email, intermitent access to Apple home page, unpredictable access to Apple store and no access to iCloud in my iMac: when I try to access these web sites, the blue web address bar is interrupted and never goes to the end, no filling up the whole bar.
I do not know what is the first problem, the Seagate HD or the Lion X, but my life is becoming a miserable one, not having the opportunity to enter in the raplacement program, losing the powerpc support because of the updating to Lion X, the necessity to buy Lion X again because it used to appear as a paid program, but not anymore, and finally having no access to my yahoo email, Apple home website and Apple store and no access at all to the iCloud: I am done.
Chao, Elías.

You can have Apple or a competent service shop replace the internal HD for a fee, unless you have AppleCare and the iMac is within its warranty period in which case it will cost nothing. If you must pay the cost will be approximately $350 US.
PowerPC support is gone with Lion. You can install or retain Snow Leopard on another partition, and boot Snow Leopard as necessary.
The inability to load web pages is a different problem, unless it is related to your failing hard disk.

I am trying to stop encryption in fire vault, but I keep getting the message, The target disk isn't eligible for reversion because it wasn't created by conversion or it is not part of a simple setup of exactly one logical and one physical volume.¨

I am trying to cease encryption in fire vault, Mac os x lion 10.7 4
I keep getting the message,
¨The target disk isn’t eligible for reversion because it wasn’t created by conversion or it is not part of a simple setup of exactly one logical and one physical volume.¨
Please can someone advise the way to disable?
Thank you.

Are you using Boot Camp? See this discussion at MacRumors.
Clinton

Get the title of a specific window not part of your app

For an app I am writing I need to get the name of the titles of the current programs running .
Does anyone know of a way to accomplish this (get the title of a specific window not part of your app) in Java?
Thank you very much.
Erik

Crossposted, obviously with no concern over wasting the time of would-be answerers.
http://forum.java.sun.com/thread.jspa?threadID=686650

Adobe Extension Manager CS5 is not showing Photoshop CS5 under products. I am using a mac trying to install a plug in for Kubota auto album.

I have a Mac, using chrome, and trying to install Kevin Kubota Auto album into Photoshop. Talked with Kevin Kubota support and they said they can't help me anymore because my Adobe Extension Manager was reinstalled and will not display Photoshop CS5 under products. Please help !!!!

EXACT and complete info, please.
BOILERPLATE TEXT:
Note that because this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

Alternatively, install & use RawTherapee instead to develop your raw files instead (free and open source).
http://rawtherapee.com/

Adobe reader not working after cs5 install

adobe reader not working after cs5 install

Nobody can tell you anything without proper system info or other technical details like exact version info.
Mylenium

How Can I Make Acrobat Not Resize Images?

I am trying to turn around 80 images into the pages of a PDF file. The pictures are saved as JPEGs and have the exact dimensions I want them to have as pages of a PDF. When I turn them into a PDF in Acrobat Pro 9 they get resized so when viewed at 100% the text looks like crap. I want to know how I can make Acrobat not mess with the dimensions of my pictures when turning them into a PDF. I make the PDF by clicking the Create button and selecting Merge Files into a Single PDF... . I then drag and drop the pictures into the window and click Combine Files. I have tried all three of the File Size settings and all of them turn out wrong. How can I make this expensive program work the way I want it to by doing htis simple thing right?
I have attached two files, the first of one of the images that will make a page viewed in windows picture and fax viewer at the original size. The second is a screen shot of the messed up PDF with blurry text, viewed at 100%. I want the text in the second picture to look just like the text in the first.

I am not trying to justify Adobe's choice, just an explanation of what may have happened. When one asks for 100%, there is a question of by pixel, by inches (cm), or by size on the screen. These are interpretations and the fact that MS and Adobe interpret them differently is not surprising. However, I think that what you are seeing is a result of the pixel display issues on the screen and with proper sizing, they should appear the same (at least I think). In Acrobat, there is also a smoothing feature under the display preferences that may be an issue and is related to how it extrapolates for the pixels.

Is Acrobat not part of CS5?

Similar Messages

Maybe you are looking for