Is Acrobat Reader 9.3.1 showing up for anyone yet

I am not seeing the 9.3.1 Acrobat Reader patch yet in my patch list. I am
guessing it should be in the list by now. Anyone have it show up? If so I
will need to dig around and see why I don't have it yet.
Best Regards,
Jim Koerner

Mine showed up late yesterday.
Jim
"Shaun Pond" <[email protected]> wrote in message
news:[email protected]..
> Jim,
>
> "Adobe APSB10-07 Reader 9.3.1 for Windows (Update) (All Languages) (See
> Note)" I see that
>
> --
>
> Shaun Pond
>
>

Similar Messages

Acrobat Reader - Tools - Export PDF shows trail has ended . . .

I am paid up for a year. But under tools, while reading in Adobe Reader (ver 10.1.1) the little blue box is still showing "Your Trail has eneded . . . Subscribe now" But when I log in I can use the Export feature. But this blue box still does not update for easier use to Export. Is there a way to fix this Blue Box?

Good day,
Try opening Reader and choosing Edit > Preferences (Windows) or Adobe Reader > Preferences (Mac). Click on 'Online Services' on the left side of the Preferences pane. Make sure your Adobe ID is entered in the Account Information section. Reader should then auto-authenticate your account. You'll still have to log in when you try to convert a PDF to Word (this is something we're working on!), but it should stop the blue box from appearing.
If this doesn't stop the issue, could you please send a screenshot of what you're seeing here.
Kind regards,
David
Acrobat Community Manager
Adobe Systems

PR05 shows data for anyone in org.

We are upgrading from 4.5b to ECC 6.0 and if I or anyone else goes into PR05 and enters a personal number for someone higher up in the orginazation you can see all of their trips. I have checked table T77S0 against our 4.5B box and all the settings appear to be equal (ecc6.0 has more settings avail.) Our 6.0 box is an upgrade of 4.5 so i'm under the impression that all tables should have retained the same switch settings...please help! Thanks in advance!

In OOAC the setting ORGIN is set to 1 and ORGPD is set to 1. In OOPS settings are: EVCCC=2; EVCRE=X; EVEGC=2; EVPAC=2; ORGA=X; PRELI=99999999; PPABT=0; all other settings are empty.(those settings were set in 4.5b and retained their values during the upgrade) FYI - I have gone into PA20 to verify infotype 105 subtyp 0001 and everything appears to be setup correctly. Is there some switch or something else I need to do to "activate" structurals since we upgraded our system, something new in ECC6.0 that was not in 4.5B. The 6.0 system acts like its taking the org. structure into effect but not the PD profiles (which are setup and tied to people). Thanks again!

Adobe X vs Adobe Acrobat Reader

I am trying to review some on line documents. The requirement is to have Adobe Acrobat Reader. My desktop shows I have Adobe X. It is also listing in my programs but does not show installed in my area of install/uninstall. Can you kindly advise if Adobe X is adequate or do I need to download something more. I am using a PC with Vista. Thank you.

There is no such thing as Adobe X. There is an Adobe Acrobat, and an Adobe Reader (not an Adobe Acrobat Reader). Which of the two are you talking about?

Problem searching some PDF files in Acrobat Reader – Non-ASCII characters

Acrobat Reader cannot search some .pdf files. I have put an example document up on Scribd here.
Any attempt to search for any word that can be clearly seen to be in the document fails with “No matches were found.”
This example document is NOT a scanned document – words and characters can be selected.
A hex display tool shows that the characters in a PDF document that can be successfully searched are in the ASCII/1252 range (A=0x41, etc).
Copying and pasting characters in the example document to a hex display tool shows that the characters in the document are not in the ASCII range.
For example the letters A to Z in the example document are in the range ‘A’ = 0xDF (decimal 223), ‘B’ = 0xDE (decimal 222), through to ‘Z’ = 0xC6 (decimal 198).
However, characters in these non-ASCII ranges are displayed perfectly by Acrobat Reader, as can be see if the example document is opened.
Therefore, as Acrobat Reader knows what these characters are, it doesn’t seem unreasonable to say that it should be able to search for and find them.
Tests were performed using Acrobat Reader X v10.1.4.
Can anyone say what this problem is?

Hi Pat, thanks for your reply.
Your reference to the title of that page being 'HARNESSES' indicates that, when you view that document in Adobe Reader, you are seeing 'HARNESSES', not
"ØßÎÒÛÍÍÛÍ". And that the remainder of the document is similarly being displayed in readable English language.
Yes as you say, you can search for 'ß' and get hits on 'A' (to use that as an example) in the example document.
But the need to form a word to be searched for into whatever code mapping this is using (for example having to enter "ØßÎÒÛÍÍ" for HARNESSES - I'm not even sure how that would be entered from a keyboard) doesn't seem to be very convenient.
Its clear the example document is using some code mapping other than ASCII / Windows-1252 (which has 'A' as 0x41). But it is also clear that Adobe Reader knows what that mapping is, and knows to use it, as its displaying (for example) 'A' for the code 0xDF.
So I guess the question is - why isn't Adobe Reader's knowledge of this mapping being extended to its search input?

I can't see the contents of some PDF's since I installed Acrobat Reader X

My OS is Windows 7 Pro
The PDF's are good because in MS Outlook 2010 (preview) or with earlier versions of Acrobat (Acrobat 9 or less) I see correctly the document.
These PDF's are created automatically by external sites (eg home banking) and contains text (showing bank transfers or extracts)
Can Anyone help-me, I don't want to install a older version of acrobat but I can´t see other solution
Regards and thanks

I, I have the Acrobat Reader X, its completely Updated
Thanks for the help. I already try to change the parameter
Try Edit>Preferences>General>Application startup and deselect "Enable protected mode at startup."
But with the some results, the reader doesn’t say anything and show a blank screen.
It's very strange.

Security fix for Acrobat & Reader 8.1.2

I just installed the security fix for Acrobat & Reader 8.1.2 from this link:
http://www.adobe.com/support/security/bulletins/apsb08-15.html
After the update there is nothing to indicate that it is actually installed.
Going to Help About both Acrobat & Reader still shows Version 8.1.2 as before.
Is there a way to tell if the patch is installed?

My problem is same as Post #2
I have downloaded the security update and still see AcroRd32.exe as File version 8.1.0.137. I've done this on more than one machine running XP/SP2 with every Windows update applied except SP3. I have deleted Acrobat Reader via Control Panel and then for good measure deleted the sub-directory C:\Program Files\Adobe\Reader 8.0\Reader manually.
I downloaded again, ran updates until I got "There are no updates available at this time."
I ran the security update as stated in the posts above(Post #16). This was verified via
Computer Management > System Tools > Event Viewer
Product: Adobe Acrobat and Reader 8.1.2 Security Update 1 (KB403742) -- Installation operation completed successfully.
There are 2 files in C:\Program File\Adobe\Security Update
HotFix64.exe and RdrSU.mst
I just don't see where AcroRd32.exe version 8.1.2.215 or whatever is supposed to come from?
I'm running this as Administrator and on 3 different machines each with the same result.

Acrobat Reader Error ...There was a problem reading this document(107)...

I created several PDF files from within stored procedure using oracle's PL/PDF package and I email the files, as an attachment, to myself. When I attempt to open a file with a size greater than 100k, I receive an error message of 'There was a problem reading this document(107)'. When I click on ctrl-OK I get 'Error reading xrefx entry' error message. However, if the file size is < 100k, it opens fine. I am using Acrobat Reader version 5.1.0.
Does anyone know the solution to this?

I created several PDF files from within stored procedure using oracle's PL/PDF package and I email the files, as an attachment, to myself. When I attempt to open a file with a size greater than 100k, I receive an error message of 'There was a problem reading this document(107)'. When I click on ctrl-OK I get 'Error reading xrefx entry' error message. However, if the file size is < 100k, it opens fine. I am using Acrobat Reader version 5.1.0.
Does anyone know the solution to this?

Unable to install Acrobat Reader 9.3.4

What ever I do, Acrobat Reader 9.3.4 installation won't execute. The file would open and process, but thereafter; nothing happens. I've tried uninstalling Acrobat Reader 9.3.3 using Revo Uninstaller just to make sure that there won't be any issues with the latest installation, but no changes. I've tried downloading the latest version via the download site, but no go. Anyone else having similar issues as me? I've checked the forums here and other forums to find a solution, but I'm unable to find any. Any ideas would be greatly appreciated. Mahalos in advance.

Hi,
I can't install acrobat reader but it seems it's for a different reason from what I'm reading in these posts. When I download it everything seems fine until I try to open it by clicking on the icon or try to read a PDF file. The Adobe reader license agreement pops up, says that I need to accept it before I continue, but there is no accept button!!! I try to scroll all the way down and nothing; there is no accept button!! I've tried uninstalling it and installing it again, same thing. I've tried the link posted in this forum and the same thing happened. It's really getting on my nerves. Can you please please help me?? It just seems so basic, but I'm totally stuck! Any help will be much appreciated!!!

Acrobat pro 9 in combination with acrobat reader X

In our company we have acrobat reader 9 installed on all desktops. About 5% of the users also make use of acrobat pro 9 and have both the pro and reader installed.
We now want to upgrade to acrobat reader X. This will work fine for the users who only have the reader, but can reader X and acrobat pro 9 coexist on the same system or do we get issues?

This will work. However, even though it's supported the installation of different products with different version across an enterprise environment introduces many variables, and there's no way that Adobe can test what soon becomes an infinite number of environments.
That said, the reason Reader X was designed to work with Acrobat 9.x (the later the version the better) is because its sandboxing features make it far more secure. So upgrading to Reade X is recommended. It would be wise to test your deployment on a few machines for a bit before deploying to all your users.
Ben

Special Standard printer only for acrobat reader, is this possible? Registry Hack

In my networking earea are a lot of printers also a big toshiba copying mashine.
While printing a pdf file to it with an PCL6 printer driver it takes a lot of time to print this.
When i take a Postscript driver it runs faster ...
so when my users will print pdf's it is difficult to explain them how to print ... an own standard printer for acrobat reader would solve this problem.
Does anyone have a solution? is there some registry hack?
regards 2CV6

In Windows (don't know if this is the case on Mac) in a corporate environment where you are connected to printers via verbose network paths, you can't see the entire path. The "printer name" gets truncated. Since the name of the printer is at the right end of the path, you can't see which printer is which.
It would be handy if they had a function that allowed you to scroll to the right of the printer list and/or throw up a tool tip that gives the entire path. I'm surprised this hasn't been flagged as a pretty significant issue.

How to erase archives protected files by Acrobat Reader

Hi,
I would like to know how to erase archives protected files of Acrobat Reader and install by Acrobat Reader and not my self..
After a download, directly on the Website of Adobe of an install file of Acrobat Reader for the french version 10.1.4 for Windows XP Service Pack 3 named : Install_reader10_fr_gtbd_chrd_dn_aaa_aih.exe , I scanned the file with Avast and it told me that it couldn't scan some files protected by a past word..
I notice the same problem for Acrobat Reader version 11.0.03
The problem is that I had already Intall this version Acrobat Reader and now it is impossible for me to erase those files.
Would anybody have a solution for this problem?
Thank you,
bedmich

It might be best to check in the Reader forum.

Windows 7 check registry for acrobat reader install

How can I check registry to detect if Acrobat reader (any version) is installed. I need to check this for Windows 7 and Windows Server 2008.
For Windows XP I was able to do this by searching for key: HKLM\SOFTWARE\Adobe\Acrobat Reader\10.0\Installer OR HKLM\SOFTWARE\Adobe\Acrobat Reader\9.0\Installer
and looking for the value of Path key.
Please let me know. thanks

SInce this is the Acrobat forum and not the Reader forum, I have no idea. You might try the Reader forum for the Adobe Reader product. There has not been an Acrobat Reader since version 5, and then it was also a different product.

SWF Export, no font showing in Acrobat and zoom border problem (Acrobat & Reader) - Indesign CS6

Hi Everyone,
If anyone could help me on this that would be great, I've spent hours on the forums and manuals to no avail.
I'm making an interactive PDF brochure in Indesign for one of our new products and I'm having issues (actual or perceived??!!) with the SWF export and PDF creation. I'm placing animations and video in the INDD, exporting it as an SWF (with the text option as Flash Classic Text) and then opening the SWF (not importing to a word doc or anything, just opening the SWF) with Acrobat using the advanced options to import the video resources and to enable the content when the page is opened. I then save the file as a PDF. In the PDF everything works as it should, the animations, the buttons, the video plays and so on. Great.. hmm not quite.
The trouble I am having is that all the content of the SWF when viewed in Acrobat seems to be getting rasterised/flattened - is this correct? After the SWF is opened, Acrobat indicates no fonts in the fonts tab in the document properties so when the SWF is zoomed in Acrobat, or the saved PDF in Reader, the font gets pixelated and the document is not searchable/text can not be highlighted. The images are not selectable either - it is as if the entire page has been flattened to one image. Is there a way to stop this so that the SWF opened with Acrobat retains the font and individual images like a normal PDF? Do I have to open the SWF in Flash first to set some parameters or something? Is there something I am doing wrong when exprting the SWF from Indesign? I think I have tried about every possible export combination. When I open the .HMTL (exported at the same time as the SWF from Indesign) in a browser, the same happens. All the animations work but the text appears to be rasterised/flattened/not searchable. Sorry if I'm not using the correct terminology.
I have tried importing the SWF back into another new INDD and exporting that as an interactive PDF but then the video does not work. I suppose I could try exporting all the individual animations as SWFs, importing them all and trying to get them to work with the video but I can see that will take quite some time and does not seem to be a guaranteed solution from what I have read on the forums - video playback being the issue.
Another problem is that when the SWF, or saved PDF, is zoomed in Acrobat/Reader between approx 150% and 210% a thick white border appears in the document and the content is squashed into the middle creating a slightly pixelated and narrow page. When I zoom out from the page I get a small white line on the right hand border at around 70% zoom. Please see images. Does anyone have any idea why this is happening and what I can do to fix it?
On another, sort of related topic, my timing panel went blank yesterday and was not showing any animations in documents that it had been used to order and synch animations on page load as well as new documents. The panel was blank. I updated to V8.0.1 and the panel sprang back into life - hope that helps anyone else finding the same problem.
I am not very familiar with Indesign/Acrobat/Flash so I guess all the above could be what I'm doing or I could be asking really dumb questions - apologies from a newbie.
Best,
Emily

Hi All,
I have now pretty much solved all the issues by creating the SWF in Flash rather than Indesign. I would advise anyone looking to create an interative PDF with animation and interactivity to go with Flash from the start. While Flash is a little more involved to create the same effects as Indesign, the extra time taken will ensure a more controllable and better looking PDF in terms of text quality, scalability and so on. Plus you will not spend days trying to get video to work along side imported SWF etc in Indesign. One of the best controls in Flash is being able to set the stage.scaleMode for the document so the PDF still looks crisp when zooming, no white borders etc. So, create the .fla, export to .SWF, open the .SWF with Acrobat, modify the advanced settings to enable start on page load and save as a PDF. If you don't know Flash, I didn't a couple of days ago, watch a couple of tutorials on Youtube.. buttons, tweens, embedding video and you'll be ready. Don't be put off by ActionScript, there are really handy Code Snippets in CS6 that do all the heavy lifting for you.
Sorry Indesign!
Best,
Em

IPad, Acrobat Reader, Content (text and pictures) no longer showing, just blank pages

Hi,
I have a user who successfully opened a .pdf attachment from outlook mail and then opened it in Acrobat Reader on the iPad and then edited it and moved it to a created folder.
Everything was working fine and the user highlighted text in the .pdf document too.
What then happened is when the user subsequently opened the file, the highlights were shown but not the content (text and pictures).
I checked they had the latest version via the apps store updates and noted there had recently been an update which had been applied.
I did check also in the diagnostics to see if there were any acrobat files, but there were none, I also turned on 'send diagnostics' in case this this will help in the future.
I rebooted the iPad by pressing and holding the power and home buttons until the apple logo appeared.
Checked again to see if I could view the .pdf content (it's around 8.5 MB file with 32 pages), still nothing showing apart from the yellow highlights that the user had done.
From within Acrobat Reader on the iPad I chose to open the file in iBooks to see if I could read it there. I could successfully open the file in iBooks and the front page thumbnail was showing (I did note that in Acrobat reader the thumbnail was white).
I found the email with attachment and opened it again in Acrobat Reader and it opens correctly, suggesting somehow the previous copy had become damaged? I have now saved this good copy over the top of the existing bad copy and all is OK except that the user has lost the highlights previously made.
Can you give me some idea of how this file has become broken in Acrobat Reader on the iPad and how I can avoid it happening again.
Many Thanks.

Thanks for replying.
This is the first time it has happened, the user has several folders containing files (on their iPad), (some .pdf's with additional highlights) these files are typically company agm board packs so contain pages of text and photo's too.
I put it down the fact that when I checked the app store for updates there had recently been an update and the user had not rebooted their iPad for some time, hence some of the underlying adobe reader files were perhaps between versions.
I don't know how you handle files when performing an update, do you close the app, flush files from memory and do a clean update?
I can confirm that the .pdf file had not been sent as an email attachment after having added the highlights.
Because the acrobat document contains so many pictures (32 pages and 8.5MB) when scrolling through it takes several seconds for some pages to appear, and others with text and pictures quite a while for the text to become sharp, I presume this is because the Acrobat Reader cannot open the 8.5MB file in one go and has to keep swapping it out of memory. Having reached the end if I scroll back to the beginning it takes 10's of seconds before the first page re-appears, otherwise it's just a white page. Interestingly in iBooks the pages appear almost immediately when viewing.
The iPad in question is model MD368B/A, 64GB, Software Version 7.1.1 (11D201) and has 28GB Memory available. Usage tells me Adobe Reader is taking 328MB and is version 11.3.1
I have just finally browsed back to recent documents, opened 2 or 3 other documents and then this one again (from recent) and it is now broken, just shows white pages (and on the thumbnail too) with my test highlights. so I can now apparently reproduce it.
Hope this all helps you re-produce
Regards,

Is Acrobat Reader 9.3.1 showing up for anyone yet

Similar Messages

Maybe you are looking for