Is Activation required after Starting communication channels.

HI Guys,
this is the scenario, i stoped some <b>active</b> communication channels from RWB due to some maintanance issues. after some time i need to start them again, now do i need to activate the communication channels again in ID..?
as there are many communication channels involved activating all of them would take more time than the given time so iam bit bothered.
please advice..
Regards,
Raj

Hi,
>>>this is the scenario, i stoped some active communication channels from RWB due to some maintanance issues. after some time i need to start them again, now do i need to activate the communication channels again in ID..?
NO
Regards
Agasthuri Doss

Similar Messages

Stop and Start Communication Channels

Hi All,
I am finding some peculiar entries in my application log which has made my scenario go awry.
I have an AS2 to Proxy scenario. I am receiving the AS2 message successfully and i have to send a synchronous signed MDN back to the sender. I have done the necessary configurations for this and all certificates are loaded and verified.
The strange part is, once i receive the AS2 message and convert it to XML using content conversion, the communication channel is stopped and again restarted. This messages i could find in application log Log entries. This makes the MDN Asynchronous as the existing HTTPS connection with AS2 sender is lost and so the MDN is not delivered as ASYNC MDN method is not set up.
I need to know what are the system processes that can start and stop a communication channel. I am sure i have not set up any availability time planning for these comm channels and also, they are scheduled manually!
Thanks,
Rashmi.

Hi Debashish,
I am using Advantco AS2 Adapter, and they say it is one of the system processes and not anything with their AS2 Adapter.
Thats why this question. Are there any system processes that can start/stop a communication channel? Atleast I have not come across anything like that.
Thanks for your reply,
Rashmi.

"Activation Required" after turning off

So I turned my phone off and turned it back on as I was told that would help with the slowness but the moment I turned it on it said "Activation Required." It only shows the screen with the wire attaching to iTunes.
Is there any fix or reason for this?
Thanks

That symbol is the "connect to iTunes" symbol. Not sure what caused it, but you need to connect it to your computer and iTunes and it should pop up saying "iTunes has detected an iPhone in recovery mode. You must restore this phone..." Then, you just restore it (hopefully you have a backup to restore from!!!) and it should work as normal after that.

Valid Acrobat Pro XI says Activation Required after 30 days

Hello!
We have made an enterprise deployment of Acrobat Pro XI using the Adobe Customization Wizard XI. Since our environment is 100% offline, we added the Serial Number (that we in advance validated online) during the Customization Wizard, so that the application can install silently without any online validation needed.
Our problem now is that Acrobat still after 30 days says that it is not activated. Can this problem have come from the fact that at one time, after the deployment configuration was made, we remade/edited the configuration with the Customization Wizard, and used the same serial code as before?
Bottom line: Do we need to revalidate online and get a new serial number every time we make a change with the Customization Wizard?
If not, what else can cause Acrobat to believe that it is not activated, even though we are using a valid key?
Error message:
Activation Required.
Please connect to the internet. Activating Acrobat XI Pro is required today otherwise it will stop working.
Thank you in advance!

No, it's not a part of Creative Cloud. It's just a standalone Acrobat Pro XI.
What I meant about "using the mst wrong" was that we run setup.exe, which i guess uses setup.ini. and in setup.ini under [product] "CmdLine=TRANSFORMS="AcroPro.mst" is added (the mst includes the ISX_SERIALNUMBER), but maybe we should try running the AcroPro.msi directly and apply the transform directly in the command line.
I know we could just try this, but it's essential that we are 100% sure that our solution works before sending it out to thousands of users.
I was in contact with someone from Adobe Support earlier who said to run this command: msiexec /i acropro.msi TRANSFORMS=AcroPro.mst /qn and "then you can check in TASK manager , you will see 4 MSiexec processes running."
That was kind of confusing. Exactly which processes they meant and how that proves that the activation was successful, I don't know.
The support guy told me that the only thing needed for the offline activation to work was to add the ISX_SERIALNUMBER to the mst, which we have. But then what does the "Grant Offline Exception" button in the Adobe Customization Wizard XI do? There must be some kind of magic that this button does that i can verify in the mst.
Also, I see the recommendations about posting this in the enterprise deployment forum, and I guess it could've been moved there, but I don't think it would make much difference since this problem remains the same whether it's deployed to lots of users or just one.
Thank you so much for any further help.

Module required in the communication channel

Dear all,
I have two requirements
1)I have a huge pdf files(total 15) each of size 10mb these files need to be zipped in the sender CC ,set to XI and un zipped at the receiver ie I need 15omb pdf files at the receiver.The idea is to reduce burden on XI.
2)A huge Xml(400mb) file is split in to multiples of 10 these files must be zipped individually in xi and send the unzipped file to the receiver.
Thanks.
Srinivasa

hi
you are doing the simple file to file scenarios
just you are sending the huge data that is you want to zip the file
you can do this there is option in the channnel
if you are creating the sender channel there is option that is "payloadzipbean" select these option and
in the receiver side choose the unzip option
and sending the the source file
and check in to the runtimeworkbench
I hope its helpful for you
Thanks
Regards
vijay

Communication channels restart

Hi,
Is there any way that we can start communication channels automatically.
I mean any way to schedule the restart of channels.

Dear Pradeep
I dont think there is automatic Activation of Communication channel. once it is active it will keep polling the files. But if it is inactive state and you want it active without manual intervention, I dont think it is possible.
Experts suggest any other options to active it automatically.
Thanks Prateek for the link. Good to know this
Best Regards
Praveen
Edited by: Praveen Kurni on Aug 6, 2008 12:07 PM

Communication Channel Archiving

Hi Gurus,
I need help in determining a problem in the archiving process of communication channels. The messages does not return any errors and I am uncertain where to investigate further to find the cause of the problem. Here is my issue:
Everyday there is a batch job in SM37 (report RFKKCOL2) that executes in ISU system and this will produce 3 image files which is thrown to PI for message processing (so that we will have a confirmation that is is processed, more like of a copy) and FTP it to a box. This is currently happening but the Image file is NOT being created completely. I am not exactly sure if the image files are experiencing the errors on the message processing since that messages in PI is not throwing errors, or the problem is in the archiving process. After the communication channel picks up the file, it is set to archive it to the same box.
Since last week, in the image target folder in OS, there are 6,082 individually images equalling to 269 MB or 282,959,479 B; and in the directory of the image archive there is a file called Image<date>.001 which compresses all the 269MB worth of pictures for that day into 1 file and it is expected that it should be the same size but it is actually only 567 KB or 581,129 B, there is a big short fall here. Where is the problem coming from? This just has happened suddenly without any system changes or any programs changes. This issue has been happening for several days consecutively now.
Please advise.
Thank you in advance

Hi Marie,
There is a slight difference between Polling interval (secs) and Polling interval (msecs). Polling Interval is the time your adapter keeps looking for the file.
Polling interval (msecs) is time to wait before the file picks up. As an example if the file is getting picked up by file adapter and you have 100 records in the file send to you by legacy system in the source folder, and right now it has only 30 records and the source application is still writing this file then if you dont give this parameter, the file adapter picks up 30 records. So your integraion is not completely done. So if you specify this parameter for 100ms then before the file adapter picks it will see the size of the file and after 100ms it will once again see the size. If there is difference then it will once again see after 100ms. So till it has the same size it will not pick up. This is very important setting for file adapter.
Regards,
---Satish

Suite Product Activation Required

CS4 - Master Suite
Vista Ultimate x64 SP1 /w patches
Latest drivers, patches, etc
Rest of CS4 suite activated AOK.
When running Acrobat Pro, get: Suite Product Activation Required, please start another suite application.
Ran PS, PP, etc -- all NG. Acrobat just gives me the same dialog box, on hitting OK, then exits and closes Acrobat.
Any thoughts?

I have the same problem with CS 4 design standard. I've installed CS 4 on 40
pc's in a classroom. Users are frustrated that
they have to start up photoshop before they can start Acrobat, just to Read PDF;s

Communication Channel Errors to be monitored in CCMS

Hi,
We have set up CCMS Monitoring templates for PI monitoring. We have a business requirment to send communication channel errors to the IT team via CCMS
We have configured ALERTCATEGORIES and defined alert rules. The communication channel errors result in alerts. These alert categories are visible under the CCMS PI monitoring template.
What is not getting transmitted is the alert long and short text in CCMS.
is there any way to achieve this?
Please point to how to guide or blogs for the same.
Thanks
Abhishek

Hi Amit...
Check the error i got when communication channel is red...
till now it was working fine.......i tested with a file which has unproper mapping ..and sent it....it gave an error...with mapping exception..(Please do remember..before i sent unproper XML....commmunication channel was green)
it often happen when i use unproper XML......
here is the messages it says
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value '/102' too long (>1 for 3. column) - must stop', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value '/102' too long (>1 for 3. column) - must stop', probably configuration error in file adapter (XML parser error)'
Edited by: Harsha reddy on Jun 20, 2008 10:01 PM

HT1369 i phone asking activation required

MY i phone 3gs is asking for activation required.after that phone is n't active

Connect it to iTunes and it should activate (you will need an Internet connection from your computer).

External control of communication channel

Hi Friends,
I had observed that for the external control of communication channels the status is showing as "Channel Stopped",is it necessary to stop the channel , Could you please update me what are the statuses we can maintain in the case of external communication channels.

thaers is only 2 statuses like stop and start communication channels only.
http://help.sap.com/saphelp_nw73/helpdata/de/ce/de449248544617876064a02b2a0fb8/frameset.htm
control of communication channels
http://help.sap.com/saphelp_nw73/helpdata/de/4b/abc051dcae4c4683841983e6d11375/content.htm

Sender RFC and JDBC communication channels required to be activated

Hello Guys,
Whenever we have a Oracle restart after the server is shut down for maintainence . The sender JDBC communication channel does not poll and we have to activate the channel again in the Integration Directory to make it work, is there any way to make it work automatically.
Similar is tha case with the sender RFC communication channel.
Allthough the component monitoring shows green button for the JDBC, RFC communication channel.
In case of the JMS channel (sender) the channels are in red.
Thanks for your help.

HI
There is no automatic ways to restart channel that you have to manually start.
You need to stop the channels first before getting oracle server down for maintenance. This will save from errors. Maximum what you can do is to start stop channel using a program externally but that require development.
Start/Stop using RWB
Starting / Stopping of Communication Channel from RWB
Start/Stop without using RWB
Control Communication Channels Externally without using RWB
Thanks
Gaurav

Communication Channel Stop and Start

Hello everyone,
We are using XI along with MQ for queing messages to our 3rd party logistics. Due to some issues happened in the past, it is decided to stop and restart the MQ channels every weekend. Now the problem is, when the MQ is down, some of the XI communication channels will go down, and will not start automatically, when the MQ bounces back. Now this had created a manual activity every weekend to stop and start all communication channels.
Question is, is there any way we can schedule it as a job to stop and start the channels, at a specific time ?

Hi!
It is possible in scheduling the messages in XI...
1. But before doing this make sure that at what time you want to be schedule ?
2. Is that time will be uniform for every week or else is it may varies ?
3. If Uniform please make schedule or else if it is varying note the difference between those timings I mean
     If your Messages are flowing for every Tuesday and also every Thursday...., etc..
4. You can schedule what ever may be the time it is suppose if those timings are varying weekly once a
     day but in that single day or next day if it was more than once..then better scheduling the
      communication channels to be start for and to be process for that particular 2 days and remaining days
      it wont work I mean stopping Cc
5. Now when come to process...in scheduling...
a) Click RWB>Component Monitoring>Communication Channel monitoiing
b) Right side u can check Availability TIme planning option click that..a seperate window will opens
    THere u can observe these options..
c) also u can see the log
I hope it will be useful to you...
Availability plan--> ONCE /DIALY / WEEKLY/ MONTHLY based on your req select any one...
Create: to create the scheduling...
change: to change the existing one
Save: to save
Reset if u want toreset alll
Delete and copy also as u know these..
While creating you can again see these options 3 main TABS
details: --> Corresponding details
CC: select ur chanel
OPTION 2
In XI 3.O you can directly do scheduling there after selecting the radio button of any Comunication channel and there adjacent to Audit log u can see availability time plan other than rt side top corder..
I hope it will be useful to u
Regards
Amar Srinivas Eli

Communication channel start

Hi Team,
We with 300+ communication channel in our PI 7.11 with Ehp1 based system.
But during all our downtimes, with one step (select all) we are able to stop all communication channels but while bring them online its been very painful as they don't come online properly if i select all to start. So we are selecting few of them and starting ....and it's so until we finish all of them.
So i am looking for Best Know Methods if there is a way to make it easier.
Regards
Sekhar

Hi Sekhar,
You can follow this link:
/people/deepak.shah/blog/2010/03/29/polling-vs-atp-in-sap-pi
http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/frameset.htm
Follow these steps:
1.> Channel Monitoring window->Right upper side>Availability Time Planning option exists.
2.>Availability Time --->one-time/daily/weekly/monthly these options are present.You can choose as per your need.
3.>Create>Description>Provide the details required.
4.>Communication channels--->add the channels for which you are specifing the timings.
5.>Donot forget to make it Active.
These steps will help you.
Regards,
Nutan

Activating Communication Channel Monitor in PI 7.0

Hello all,
Can anyone tell me Detail steps involved in <b>Activating Communication Channel Monitor</b> I have tried assigning my User with following roles
A user needs the following role to query the status of communication channels:
●      xi_af_channel_admin_display
A user needs the following role to start or stop communication channels:
●      xi_af_channel_admin_modify
Is it correct ?
What are steps ?
regards
Prasad

Hello Sreeram ,
Thanks for the Reply.I am working on PI 7.0 SP06 in a SAP Note I have read that
it is from PI 7.0 SP8 i think because of the lower SP level iam not getting the
Communication Channel Monitor displayed.
Note 1000528 - FAQ: XI 3.0 / PI 7.0 Adapter and Channel Monitoring
Regards
Prasad
Message was edited by:
        prasad chintala

Is Activation required after Starting communication channels.

Similar Messages

Maybe you are looking for