Is Adobe Coldfusion Enterprise V10 supported by Solaris 11 OS?

Hi
I have a customer looking at Colfusion Enterprise but want it to run on a Solaris v11 Operating System. There appears to be some confusion in some of the tech specs that  it may not be, so am looking for clarification.
thanks

Hello,
Thank you for your post. You can try to install CF10 Enterprise on Sun Solaris 10 for SPARC, however the same is officially not supported by Adobe.
Regards,
Anit Kumar

Similar Messages

  • Censorship on Adobe ColdFusion forums - Open letter to the management of the Adobe ColdFusion forums

    This is reproduced from its original location at http://cfmlblog.adamcameron.me/2013/06/censorship-on-adobe-coldfusion-forums.html; it is also posted on the relevant ColdFusion forum. Apologies for the cross-post, but the two forums have different membership, and I think it's relevant to both.
    Open letter to the management of the Adobe ColdFusion forums
    (I do not know how to contact you, but I will try to find out and send this to you directly as well, as a courtesy).
    Hi.
    I am a veteran user of your ColdFusion support forums. Over the last decade or so I have been visiting the site daily (indeed several times a day: I get notified when any post is made on any of your ColdFusion-centric forums), and answering as many of people's questions as I can. For the last few years it's been via the web UI so you can go check my participation, but prior to that I was using the forums via NNTP, and my participation during that period is less easy to quantify, but it's to the tune of a few thousand posts / answers to people's questions. I consider myself an asset to the forums, and the ColdFusion community. I mean this just as "for the record", rather than any attempt to inflate any sense of my worth.
    However as of today - unless you take remedial action as I will go on to detail - I will be surrendering my membership of your forums, and ceasing all attempts to assist people there.
    Why am I considering doing this? Well firstly I will reproduce a thread from your forums, then I will discuss it. Where possibly the quoted material below is as it was initially posted, and if it's not exactly as originally presented, this is an accident on my part. I have highlighted some points I wish to discuss with you, simply for ease of cross-reference.
    I have confirmed with Jason Dean (12Robots) that is happy for me to quote him here. I did not attempt to contact the other participant: "grazan".
    Below is a chronological reproduction of the thread (in its original form, anyhow):
    cold fusion 9 500 Internal server error.
    created by grazan
    all of a sudden none of our cfm web pages work on a windows 8 server running iis 7 .... the
    server shows no errors in the event viewer .... occasionally functionality comes back w/o doing
    anything ...... cold fusion did have all the hotfixes updated a few months ago but i cant get to
    the admin page to give what the version is
    thxs
    created by 12Robots
    First, ColdFusion is one word.
    Second, what is a WIndows 8 server?
    Third, and most important, you have provided ZERO detail. We can't help you if you don't provide something other than "none of our cfm web pages work".  ColdFusion has logs (<coldfusionDir>/logs) JRun has logs (<coldfusionDir>/runtime/logs). Even if the Windows event viewer shows nothing, there should be info in those log files about what is going on.
    Good luck,
    Jason
    created by grazan
    YOU KNOW JASON YOUR A FRICKING IDIOT ......
    I DIDNT REALIZE THIS WAS A GRAMMATICALLY CORREDCT FORUM ...
    THANKS FOR NO HELP
    created by 12Robots
    *you're
    jason
    created by Adam Cameron
    Hahahahaha. Nice.
    Adam
    created by Adam Cameron
    Well if you got over your misplaced indignation for a moment, let's see:
    ColdFusion is what people will google for, so in the spirit of helping others who might have the same question as you later on, spelling it right will help the community.
    Jason's observation that you give us absolutely nothing to go on so it's basically impossible to help you is a fairly poignant observation, right? You do want help? Right, so here's some suggestions:
    Articulate your issue clearly, with sufficient detail that we can help you. Read this:
    http://www.catb.org/esr/faqs/smartquestions.html
    Secondly... being rude to someone like Jason who really is one of the most helpful people on
    these forums is a pretty stupid idea. And just serves to make you look a bit of a dick. Esp. with the caps lock on.
    But anyway, let's call that a false start. Give us the details of your issue, and we'll try to help.
    Cheers.
    Adam
    At this point, the moderator started redacting earlier messages, as detailed below:
    Redacted version of earlier message:
    created by 12Robots
    First, [Jason, please see forum guidelines]
    [rest of message as above]
    Redacted version of earlier message:
    created by grazan
    [please see forum guidelines]
    Redacted version of earlier message:
    created by Adam Cameron
    Entire message redacted
    Redacted version of earlier message:
    created by Adam Cameron
    [unnecessary comments removed - Adam please see forum guidelines]
    Give us the details of your issue, and we'll try to help.
    Cheers.
    Adam
    And now back to the live thread:
    created by 12Robots
    Forum admin,
    You censored the comment "ColdFusion is one word"?  Seriously?
    I didn't realize that suggesting that someone spell the name of the product correctly was against the forum guidelines.  I guess I could go look it up, but I will just unsubscribe and help out at Stack Overflow instead.
    Good luck,
    Jason
    created by Adam Cameron
    Please see how much I used to help out on these forums.
    I'm outa here, but not before I complain about your dictatorial behaviour.
    Censorial nazi idiot.
    [The entire message above has now been redacted].
    That's the end of the relevant part of the thread.
    Clearly I wish to speak to you about this censorship your moderator is choosing to undertake.
    Firstly, let me say that I understand the perception that forums require moderation. Personally I think this position is of dubious merit, but so be it: it's a common practice. And I generally understand when I see things that have been moderated, or when a moderator step in and advises that they consider someone's wording contravenes forum guideline. I understand all this.
    However.
    I think the behaviour of your moderator in this situation is unacceptable. Let me elaborate.
    Firstly, The highlighted comment of Jason's was removed. This comment stated - correctly - that the correct spelling of ColdFusion is as one word, as per his guidance. This comment was censored/redacted by your moderator. For the life of me, applying my most "socially modest" mindset, I cannot see what was wrong with Jason's comment, and why it needed any follow-up on any description. It was accurate advice.
    The original poster's response to Jason was indeed a bit gratuitous, but - really - so what? No-one is taking offence here, and there's nothing anyone reasonable could take offence at. The person is just being a bit childish in their response. And, I hasten to add, at their own expense, I think. I see not reason to have redacted what they said.
    We now come to my responses. One entire response I made was redacted (I've only just noticed this, whilst proofreading this letter).  A number of tracts was redacted from my own initial post on the thread. Here I was simply explaining why Jason said what he did, and why it's good advice. And it was good advice. Your moderator here has removed both good advice, and an explanation as to why it was good advice. Again, I cannot fathom why your moderator has done this.
    Following on from this I back-up Jason's assertion that the original post was inadequate on detail for us to help. This too is accurate. I reiterated this to try to make the origial poster see that Jason wasn't simply being unhelpful - to the contrary - pointing out we need more information before we can help is very good initial advice here. Advice that has now been deleted.
    Next is some slightly contentious wording on my part, I suppose... at least if one doesn't actually read what I say, instead simply zooming in on one word and assessing it out of context. I pointed out that being abusive and writing in all-caps is unnecessary, and makes the person look like a dick. Note I didn't say the person was a dick (that would be abuse... very mild though), I was saying that given the behaviour the person was engaging in, they could be perceived that way. Which is... accurate. And saying someone is a dick and suggesting they could be perceived as a dick are two different things. One is ad hominem attack (bad), one is simply an observation / guidance (not bad).
    At this point Jason drew my attention to this censorship going on. And this is another thing that I think is inappropriate on the part of the moderator. I have little problem with them thinking that content on this thread needs censorship (whilst they are wrong, they are entitled to their opinion), to silently and anonymously redact people's posts is an inappropriate - and to be frank cowardly - handling of this situation. If the moderator has an issue with something written on the forums, the courteous and professional thing to do would be to advise the participants that they have overstepped. This would give us a chance to remediate the situation, or to simply disagree. Simply excising someone's work - because this is volunteer work we are engaging in here - is unacceptable.
    If anything ought to have been censored from the thread it was my last comment. Whilst it was accurate, I did use harsh sentiment, I accept this. However in the given situation, I don't think I have been the most out-of-line participant in proceedings.
    I would like you to remediate this situation, and here is how I would like you to do it.
    Restore Jason's original post. There was no reason to censor it.
    Restore grazan's all-caps post. It was doing no harm.
    Restore my second post (not the one laughing at Jason's joke, the longer one I discuss above). Again, useful and accurate information was removed from this post, and there was simply no reason to have had done so.
    You can leave my last comment redacted. Fair enough. Whilst I stand by what I said, it is unhelpful in the context of the thread.
    I also want the moderator to be censured, and I would like them to apologise for their behaviour, by posting on that thread explaining that they understand their behaviour was inappropriate and unacceptable.
    If they are a community volunteer, they should be dismissed from their position. They are clearly not capable of fulfilling this role in a professional, well-balanced manner.
    If they are an Adobe staff person, then the censure will have to be sufficient, although I think they should be relieved from their duties as a forum moderator, as they are not up to the task at hand.
    Talk to your other moderators and advise them they need to act with a sense of balance and professionalism when moderating the forums.
    In return, I will continue my participation on the forums, and continue to help the ColdFusion community members where I can, in the spirit of goodwill and co-operation. I will also try to convince Jason to do the same.
    If you cannot see right to resolve this situation appropriate, I will surrender my membership of the forums and cease helping your community.
    You can reply to me either via a comment against this post, or via email ([email protected]). That said, see the caveats in my communications policy: I reserve the right to publish any communications on this topic as I see fit (within the bounds of common sense).
    Thanks for your time.
    Adam Cameron

    Adam,
    Comments from a kindred spirit...
    I suggest you take a breather and go do something else for a few days or weeks.  Don't stomp your feet and say "I'm done for good, I won't be back", because like it or not, some of the reason you're here is to benefit YOU, and if you do go cold turkey you'll miss that benefit.
    In other words, "never say never".
    Like you, I have been extremely frustrated by the running of the forum from time to time as well.  Sometimes it's the quality of the forum software, sometimes it's the mix of other immature people who comment, sometimes it's just me.  Usually it's not the moderation or actual running of the forum, but I do understand where you're coming from.
    I have benefited greatly on several occasions just by taking a vacation from forum participation.
    We all have to understand two things:
    1.  We're able to communicate here by the good graces of Adobe, who are first and foremost a business, trying to achieve their business goals.  They'd rather not upset all the idiots, because unfortunately idiots have money to spend too.
    2.  Nobody's perfect.
    I'm not sure about the specifics, but the moderators are generally also volunteers.  See item 2 above.
    Hope you don't choose to stop contributing to the community, as no matter what, your contribution is good for the world.
    -Noel

  • How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

    How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

    First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
    You can find it here:
    [Ann] Identify Your InDesign File
    If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
    In regards of the script showing a result for InDesign files higher than CS6:
    CS7 = CC v9
    CS8 = CC v10 = CC-2014 or CC2014.1
    Uwe

  • Reg: Oracle 9i Enterprise Edition software for solaris x86 (32-bit)

    Hi,
    Where can i download the Oracle 9i Enterprise Edition software for solaris x86 (32-bit).
    Thanks in advance.
    Edited by: ora_man_8873786 on May 14, 2011 12:50 AM

    If you have a CSI you can always order the CD at My Oracle Support by submitting a SR.
    Sybrand Bakker
    Senior Oracle DBA

  • ORM in Adobe ColdFusion 9  for  flex developers

    What advantage does the
    ORM in Adobe ColdFusion 9
    Have for flex developers as Flash builder 4 does so much of that for us nowadays

    What is nice about it is the AIR support, imho, so that you can do object-oriented database management with a SQLite database on the client without having to have a server. The actual ORM swc that comes with CF9 is placed in the Flex library and then no more having to write inordinately complex queries to accomplish simple things; you simply update objects' properties like you would with a typical object in FLEX. In addition, if you're using the ORM framework and want to build an application that allows users to easily update a remote database with data worked on offline, it's built in. As you probably know, there are several ORM frameworks out there already, but this appears to be the one Adobe is going with so it's worth a shot with the hope of long-term support, as opposed to some of the others which are not supported or rather stale.

  • Will adobe ColdFusion allow me to connect to Mozilla Firebird DB?

    I'm surprised that ColdFusion will connect to Access and MySQL but not to Firebird DB.
    http://www.firebirdsql.org/
    Firebird is an enterprize level DB, been around as long as Oracle (in the form of Interbase, then Firebird), has full SQL standards compliance, is high performance, has all the triggers and stored procedure and other stuff MySQL doesn't have, yet it is not listed in the supported DBs of Adobe ColdFusion.
    What gives?

    Ian, may I present Firebird and Jaybird:
    Firebird: The best DB in the world!
    http://www.firebirdsql.org/
    Jaybird: The JDBC 4 driver for the best DB in the world
    http://www.firebirdsql.org/index.php?op=devel&sub=jdbc&id=faq#27
    http://www.firebirdsql.org/index.php?op=devel&sub=jdbc
    http://www.firebirdsql.org/index.php?op=files&id=jaybird
    Thanks for cluing me into the correct acronym to look for "JDBC"  ... so now I can get started.

  • I am using Adobe Creative cloud enterprise version. I tried to download assets from newly launched Adobe Market place. It is saying that this feature is only available for premium paid customer. So Adobe CC enterprise is paid version. Why is it again aski

    Guys, Any idea why I am unable to download assets from Adobe Market Place. I am using Adobe CC enterprise.

    Cloud Market http://terrywhite.com/adobe-creative-cloud-market/ may help
    -and http://helpx.adobe.com/creative-cloud/help/market.html

  • HTTP Server is not currently supported with Solaris 10

    I am having a problem to start the HTTP Server on Solaris 10 (I am installing HTTP Server as part of HTMLDB installation on Solaris 10).
    I had a problem to install it at first, however I've found on 'AskTom' that unsetting ORA_NLS33 helps and it did. Now I can't start the HTTP server and I've found on metalink that 'HTTP Server is not currently supported with Solaris 10, this is targeted for Q2CY05'.
    Has this been fixed yet?
    Thank you for your time.
    DanielD

    Hi james,
    I have checked the log file but i am unable to find what to do next.
    I am giving the small piece of content of the log file. The following messages are repeating again and again...
    Log content:-
    07/09/23 17:20:36 Start process
    /dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
    07/09/23 17:22:26 Start process
    /dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
    07/09/23 17:22:30 Start process
    /dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
    07/09/23 17:24:40 Start process
    /dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
    07/09/23 17:24:44 Start process
    /dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
    07/09/23 17:26:36 Start process
    /dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
    07/09/23 17:26:42 Start process
    /dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
    07/09/23 17:28:57 Start process
    /dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
    07/09/23 17:29:01 Start process
    /dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd

  • Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    resetpassword
    That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

    I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

    Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
    You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X  or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

  • When are retirement dates for certification MCITP: Enterprise Desktop Support Technician on Windows 7 and MCITP: Enterprise Desktop Administrator on Windows 7?

    Hi,
    So what's the current situation with the MCIPT certifications in Windows 7?
    MCITP: Enterprise Desktop Support Technician on Windows 7
    MCITP: Enterprise Desktop Administrator on Windows 7
    The certifications had previously been scheduled to retire in July 31, 2013.
    Then that deadline was extended and they were due to retire in January 31, 2014
    Presently, the certifications are listed on the ever unhelpful Microsoft Learning website
    MCITP page and the
    windows certifications
    page.
    In typical Microsoft Learning unhelpfulness there is a bland, confusing and uninformative statement saying
    "Most MCITP certifications will be retired by July 31, 2014. Please check the
    retired certifications and
    retired exams pages for specific retirement dates."
    Naturally, Microsoft aren't being specific about which MCITP certifications are being retired.
    To be more obstructive and confusing, us poor learners are invited to check the retired certifications page, which only lists certifications that have already retired,  for information about when a certification
    will retire in the future. I have seen this done repeatedly in this forum and on borntolearn.mslearn.net in reply to questions about future certificate retirement, which is totally useless and perhaps deliberately deceptive, as the exam aren't
    being discontinued and there's no info about future certification retirement.
    There has previously been actual helpful information on the Microsoft learning webpages with statements explaining that whilst in a transistion between the older style MCITP and newer MCSA certification for Windows 7, that both certification titles will
    be awarded until x date, when the MCITP will be retired and the MCSA will be awarded only. I can't see anything like that on the site at the moment.
    I'd be most grateful if
    anyone can link me to a Microsoft press release / blog / webpage that announced the scrapping of the January 31, 2014 deadline (as I must of missed this announcement)
    anyone can give an update on the current Microsoft thinking about when this certificate will retire? Especially any links to announcements.
    are both MCSA and MCITP certifications still being awarded?
    advise what's the best way of staying up to date with multiple changes to exam and certification retirement announcement? (apart from borntolearn, which is awful and again, just directs back to the retired exams/certifications pages)
    Many thanks everybody!
    edit: formatting and spelling

    Why choose a near retiring credential ?  
    * Have ever you applied for a job with keyword requirements ?  Employers can be (and have been) insanely specific. (Then again that sort of gatekeeping for employment usually guarantees a fresh batch of pathological liars are your applicants, but I digress.)
    * Also could be on a time deadline, e.g. contract bid requires x number of people to be certified, CompTIA requirement deadline could be arriving, and so on.
    * Taking 2K08 exams when working in a 2K08 environment is probably easier than jumping into the next version without any access to it (other than building your own virtual servers or labs).
    My current employer uses 2K08 not 2K12.  There are also 2K03 servers still in production (eventually being phased out). 
    I don't know what the stats are today but (in 2012) 2K08 was leading over 2k12 in market share.  
    I thought that's what truly drives these exams' and certification's availability.

  • Getting error "Cannot open the file "*****.INDD". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."

    How to fix this problem
    "Cannot open the file "*****.INDD". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."

    When I have seen this message it is either when I try to open a document with an older version of Indesign E.g. an indesign 2014 document with Indesign CC.
    The other time I have seen it is to open an Indesign CC document with Indesign 2014 which does not have Mindsuite - a plugin I use. Mindsuite, as yet, has not upgrade the plugin for Indesign 2014 therefore it recognises that a the document was created withe a plugin that the 2014 version does not have installed.
    I believe your problem will be something like that.

  • Adobe flash player not support in android 4.1.2 samsung s2

    Plz give me feedback (private contact info removed by moderator). i have Samsung S2 Mobile. And i have android 4.1.2(Lastest S2 Version). I can install this software. but I cant see any LIVE TV CHANNEL. EveryWhere flash player required. And i READ somewhere that in ADOBE FLASH PLAYER not SUPPORT in Samsung S2 Mobile. Sir plz SOLVE THIS PROBLEM AS SOON AS POSSIBLE.
    SIR PLZ GIVE ME FEEDBACK...
              -THANK YOU SO MUCH...

    There is no more Flash Player for Android and there won't be another. Android is no longer compatible with Flash Player. Playing Flash content is very processor consumptive and it drains your battery, also shortening the life of it. Android (Google) recommends using either "Dolphin" or "Puffin" as your browser if you need to view Flash content with a mobile device running Android. They're both free in the GooglePlay store. These browsers use "server side" rendering to reduce the load on your device.

  • Does Adobe Acrobat 8 Professional support image which has been converted to a PDF to be edited?

    Hi,
    Does Adobe Acrobat 8 Professional support the content of an image which has been converted to a PDF file to be edited?
    Sometimes when I try to edit the content of a PDF file which was created by converting an image into a PDF file, I notice that Adobe Acrobat 8 Professional tells me that this Adobe Acrobat 8 Professional cannot support this content.
    On the other hand, even if Adobe Acrobat professional could edit a PDF file, I notice that there are far too many restrictions to edit the content, for example, if your new editing words are more than the old then the line goes out the page instead of going to a new line. In addition, if you reached to the end of a line, and then you press 'Enter' to let the rest of words of the last line be written  on the next line, you notice that the words  writes on the words of  line which follows the line which is being edited. As a result, the text would be quite crazy.
    Any comments would be highly appreciated
    Thanks a lot,

    Thanks very much,
    Sometimes when I try to edit the content of PDF files which were created by converting an image into a PDF file, I notice that that Adobe Acrobat 8 Professional tells me that tells me that this content cannot be supported 
    Even in the case of files created from word processing files, I notice that there are far too many restrictions in editing the content. For example, if you insert extra words or characters, the text does not automatically word-wrap. In addition, the "Enter key" does not work properly to insert a new line at the expected position. As a result, the text is quite crazy.

  • Portal Server support on Solaris/Intel Architecture

    Hi Gurus,
    Is iPlanet portal supported on Solaris on Intel architecture? Any of you have this kind of setup and experienced any problem? or was it smooth sailing? or is there some particular version of Solaris OS that has to be used..etc.
    Thanks
    Ashok

    The short answer is No. The current version of Portal Servers both 3.0 and 6.0 are supported only in Solaris / Sparc arch.

Maybe you are looking for