Is Adobe Illustrator 10 Compatiable w/Vista?

Thank you!

Kimberly,
I just had a look in my archive, and found the answer in an old thread from 23rd June 2008:
It should work.
Its working is implied both in the OP by Lara and in the first post answer by Harron.
OP: Illustrator 10 and Vista
I have had Illustrator 10 installed on my PC with Vista for about a year now with no problems, but now all of a sudden it won't work! I can't really afford CS3 (the only version "officially" supported by Vista) and I need Illustrator for both work and personal. Anyone else run into the same thing and have any advice??
Thanks in advance!!!
First post:
This is the "standard" advice for running older (v.12 and prior) versions of Illustrator on Windows Vista:
Right-click on the Illustrator.exe file, choose properties, click the compatibility tab, and then select...
Disable Visual Themes
Disable Desktop Composition
Disable display scaling on high DPI machines
If you already have these settings selected, I don't know what else you might try other than a good old-fashioned prefs trashing (see FAQ #2).

Similar Messages

Cannot drag, delete or cut adobe illustrator files in windows vista

Hello All
I am using adobe illustrator cs in windows vista and i get the following error when i try to delete, move or cut illustrator files:
'The action can't be completed because the file is open in another program'
It was working when i first started using it but now it just doesn't work at all.
All solutions will be highly appreciated.
Thanks,
yb

It's not just a Vista thing. I frequently encounter the problem in both Windows XP and Vista with CS3 versions of Illustrator, InDesign, and Acrobat files.
I've heard no report yet as to whether this is fixed in CS4.
JET

Adobe Illustrator CS5 will not open in Windows Vista

All I get is "Adobe Illustrator has stopped working"
Then i get "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
I've tried reinstalling 6 times now, and it still wont work. I dont know where to start. Please help ASAP I have a presentation to submit!!

I beleive you are looking at the right place ,
Click the start Button
At the bottom serach box , type "amt3.log" , does the file show up in the list , if no
then I would say contact Adobe support ,and get this fixed.
The problem could be either at the time of installation or launch.
also can you share the install logs:-
1 .Navigate to the log files in one of the following folders:
Windows 32 bit (XP, Vista, 7): \Program Files\Common Files\Adobe\Installers\
Windows 64 bit (XP, Vista, 7): \Program Files(x86)\Common Files\Adobe\Installers
The log filename includes the product name and install date, followed by ".log.gz." The extension .gz indicates a compressed format.
Use a decompression utility such as Winzip or StuffIt to decompress the .gz file. Once uncompressed, the log file is a plain text file.
Open the .log file using WordPad (Windows)
copy and paste the log file in the pastebin.com

How can I install the free version of adobe illustrator in a PC with Windows Vista?

How can I install the free version of adobe illustrator in a PC with Windows Vista? When i try the program says that i haven't suitable system requirements

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

OLE embedded Adobe Illustrator Artwork files not rendering properly

I'm using BroadVision's Quicksilver. I've attempted to embed AI Artwork
files as OLE objects (linked and not linked), but they don't render within
Quicksilver. After working with their support team, they came to the
conclusion that it was an Adobe Illustrator issue because they were
able to reproduce the issue in Wordpad (not MS Word).
The problem can be reproduced by the following steps (tested in Vista,
XP, & Server 2008):
:- Open Wordpad
:- Click Insert -> Object -> Create From File -> Browse -> Find and select a file -> Open
Other variations on this theme encounter the same problem, including
pasting it from the clipboard.
If you open a Wordpad document in MS Word and embed the OLE
object, it saves a preview of the image which is visible from Wordpad
if you open it later on (as long as you don't link to the original; if you do,
and attempt to update the link, the preview image will go away). However,
subsequent alterations of the OLE object don't show up in Wordpad -- rather,
the image that was rendered in Word continues to be displayed (unless, of
course, you open it in MS Word again and re-save after the link is updated).
It appears the support team at another company encountered a user
experiencing the same or similar issues with their product, but on
Illustrator CS2 as opposed to CS4:
http://www.graphpad.com/faq/viewfaq.cfm?faq=1309
Unfortunately, the "export to another format" workaround won't suffice.
We're working with thousands of Illustrator artwork files that need to be
version controlled, and other technical documents will link to the same
Illustrator file. When an AI file is updated, all technical documents
need to use the altered version; linking to an exported version of the
file just creates one more link in the chain that can create problems
or confusion.
Even if the version control stuff wasn't an issue, exporting to other
formats seems rather limited. If we export to other formats (eg, pdf)
the images render poorly compared to what they look like in AI.
We've tried a number of things to work around this:
* Make sure AI [is/is not] already running
* Rasterize paths
* Alter the size of the image in AI
* Alter the size of the object in the target application
* 'Save as' with a different version of AI selected (for all versions)
* Saving as an EPS or PDF -- the former has the same rendering issue
as AI files; the latter renders but the drawing is blocky, probably because
the graphics are being rendered at a very low resolution and scaled up
after the fact.
* Looking for or changing preferences in Illustrator that might affect it
* Altering color scheme and various other similar settings
* CS5 trial version -- same problem as CS4
* Save the [wordpad] document -> close -> re-open
* Switching between 'display as icon' and displaying the image
* Copy & paste from various sources (from AI -> Wordpad,
MS Word -> Wordpad, etc)
The only way I can get it to render in Wordpad (or quicksilver for that matter)
is if I embed the AI file in a Word/RTF document, then embed that in
the target application (which is awfully convoluted). Furthermore, if the
embedded Word/RTF file links to the original file, when you open the
document containing the embedded Word/RTF it doesn't attempt to
update from the linked AI file, just the linked Word/RTF file.
I'm sure there's other things we've tried to resolve this, but that's what comes
to mind right now.
If anyone can help with this, or clue me in that it's a bug in AI, I'd sincerely
appreciate it.
-Brian

Well, no offense
-=-=-=-=-=-=-=-=-=-=-=-=-
None taken. I'm helping someone else solve a technical problem, I'm just not questioning their approach; I'm not a tech writer, so I'll pass your suggestions on.
-=-=-=-=-=-=-=-=-=-=-=-=-
(...) you are trying to solve one hell of a crooked workflow on the wrong end and the one fatal flaw being that you insist on using an office tool to create layouts and expecting it to render print-ready documents. That just cannot work. Even the most stubborn tech writers I occasionally work with, recognize the need for eventually firing this at InDesign/ InCopy/ Framemaker and associated server versions and fuse the imported RTF/ Word documents and illustrations based on template layouts, scripting and rule-based formatting, which can all happen automnatically on a server with the respective software.
-=-=-=-=-=-=-=-=-=-=-=-=-
I was mistaken when I described how things are version controlled. They would prefer to embed the AI images in each document and have each document be version controlled (that is, if the image changes it should /not/ affect other documents).
However, I wasn't mistaken when I said there are thousands of already developed AI images. The team working with these images has already procured a volume license for Framemaker and is hesitant to purchase other software unless there's no alternative, or the time savings would justify it. I wish I could comment on the efficacy of your suggestion, but I'm not a tech writer; I'm unfamiliar with InDesign, InCopy, and FrameMaker.
-=-=-=-=-=-=-=-=-=-=-=-=-
So for what it's worth, you are probably wasting your time and resources on something that by its nature starts out with a limited process. I'm not even sure if AI fully supports OLE. I seem to remember having read about it not supporting several features and commands....
-=-=-=-=-=-=-=-=-=-=-=-=-
-=-=-=-=-=-=-=-=-=-=-=-=-
If we export to other formats (eg, pdf) the images render poorly compared to what they look like in AI.
What do you mean? If they look "bad" in Acrobat or something, then you are simply using the wrong export settings. which is perfectly fixable.
-=-=-=-=-=-=-=-=-=-=-=-=-
In Acrobat the SV graphics look beautiful at any scale, but if the PDF is OLE embedded in another application it looks terrible.
-=-=-=-=-=-=-=-=-=-=-=-=-
If they look "bad" within your word documents, then we pretty much return to what I said in the first paragraph - there's a good chance it's simply Word rendering the artwork poorly due to its limited abilities of dealing with graphics of any kind. I would even think that manually changing the graphics properties would improve appearance then....
-=-=-=-=-=-=-=-=-=-=-=-=-
I'm not an expert on OLE; I made the [potentially bad] assumption that Acrobat would be responsible for rendering the graphic when a PDF is OLE embedded, so the application making use of the object would have limited control over the quality of the image it receives (if my assumption were correct anyway).
I know the host process can specify whether the image is rendered as an EMF or WMF image, otherwise I know very little about the OLE API and what limitations the host process can impose.
I'll keep tinkering to see if the PDF solution can be made to work.
In the meantime, would anyone like to make a determination as to whether this is a real bug in AI or not?
-Brian

Need documenation proffs to show that Adobe Illustrator 9.0 and 14.0 is compatible with Windows 7

This link was provided by Adobe support.
As I am unable to open this link,I am resubmiting this request.
Please refer the mentioned link highlighting system requirement for Installing Illustrator different versions:
https://help-internal.adobe.com/content/help/en/x-productkb/policy-pri cing/system-requirements-illustrator.html
Kindly send me documenation proffs to show that Adobe Illustrator 9.0 and 14.0 is compatible with Windows 7

Illustrator CS6 system requirements
Windows
Intel® Pentium® 4 or AMD Athlon® 64 processor
Microsoft® Windows® XP with Service Pack 3 or Windows 7 with Service Pack 1. Adobe® Creative Suite® 5.5 and CS6 applications also support Windows 8. Refer to the CS6 FAQ for more information about Windows 8 support.*
1GB of RAM (3GB recommended) for 32 bit; 2GB of RAM (8GB recommended) for 64 bit
2GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash storage devices)
1024x768 display (1280x800 recommended) with 16-bit video card
DVD-ROM drive compatible with dual-layer DVDs
Some features in Adobe® Bridge rely on a DirectX 9–capable graphics card with at least 64MB of VRAM
This software will not operate without activation. Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.† Phone activation is not available.
* Learn more about Windows support.
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8 or v10.7. Adobe Creative Suite 5, CS5.5, and CS6 applications support Mac OS X Mountain Lion (v10.8) when installed on Intel based systems.*
2GB of RAM (8GB recommended)
2GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 display (1280x800 recommended) with 16-bit video card
DVD-ROM drive compatible with dual-layer DVDs
This software will not operate without activation. Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.† Phone activation is not available.
* Learn more about Mac OS X Mountain Lion support.† This product may integrate with or allow access to certain Adobe or third-party hosted online services ("Online Services"). Online Services are available only to users 13 and older and require agreement to additional terms of use and Adobe's online privacy policy. Online Services are not available in all countries or languages, may require user registration, and may be discontinued or modified in whole or in part without notice. Additional fees or subscription charges may apply.
To the topIllustrator CS5 system requirements
Windows
Intel® Pentium® 4 or AMD Athlon® 64 processor
Microsoft® Windows® XP with Service Pack 3; Windows Vista® Home Premium, Business, Ultimate, or Enterprise with Service Pack 1; or Windows 7
1 GB of RAM
2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash-based storage devices)
1024 x 768 display (1280 x 800 recommended) with 16-bit video card
DVD-ROM drive*
Broadband Internet connection required for online services†
Mac OS
Intel processor
Mac OS X v10.5.7 or v10.6
1 GB of RAM
2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash-based storage devices)
1024 x 768 display (1280x800 recommended) with 16-bit video card
DVD-ROM drive*
Broadband Internet connection required for online services†
*This product may allow you to extend its functionality by accessing certain features that are hosted online, including CS Live online services ("Online Services"), provided you have a high-speed Internet connection. The Online Services, and some features thereof, aren't available in all countries, languages, or currencies and can be discontinued in whole or in part without notice. Use of the Online Services is governed by separate terms of use and by the Online Privacy Policy. Access to some services sometimes requires user registration. Some Online Services, including services that are initially offered at no charge, may be subject to additional fees and require a separate subscription. For more details and to review the applicable terms of use and Online Privacy Policy, visit www.adobe.com.
To the topIllustrator CS4 system requirements
Windows
2 GHz or faster processor
Microsoft® Windows® XP with Service Pack 2 (Service Pack 3 recommended) or Windows Vista® Home Premium, Business, Ultimate, or Enterprise with Service Pack 1 (certified for 32-bit Windows XP and Windows Vista)
512 MB of RAM (1 GB recommended)
2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on flash-based storage devices)
1,024 x 768 display (1,280 x 800 recommended) with 16-bit video card
DVD-ROM drive
Broadband Internet connection required for online services*
Windows 7 compatibilityMac OS
PowerPC® G4 or G5 or Intel® processor
Mac OS X v10.4.11–10.5.4
512 MB of RAM (1 GB recommended)
2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on flash-based storage devices)
1,024 x 768 display (1,280 x8 00 recommended) with 16-bit video card
DVD-ROM drive
QuickTime 7 software required for multimedia features
Broadband Internet connection required for online services*
Snow Leopard compatibility*This product may allow you to access certain features that are hosted online ("online services"), provided you have a high-speed Internet connection. The online services, and some features thereof, aren't available in all countries, languages, or currencies and can be discontinued in whole or in part without notice. Use of the online services is governed by separate terms of use and by the Adobe Online Privacy Policy. Access to these services sometimes requires user registration. Some online services, including services that are initially offered at no charge, may be subject to additional fees. For more details and to review the terms of use and Online Privacy Policy, visitwww.adobe.com.
To the topIllustrator CS3 system requirements
Windows
Intel Pentium 4, Intel Centrino, Intel Xeon, or Intel Core Duo (or compatible) processor
Microsoft Windows XP with Service Pack 2 or Windows Vista Home Premium, Business, Ultimate, or Enterprise (certified for 32-bit editions)
512 MB of RAM (1 GB recommended)
2 GB of available hard-disk space (additional free space required during installation)
1,024 x 768 monitor resolution with 16-bit video card
DVD-ROM drive
QuickTime 7 software required for multimedia features
Internet or phone connection required for product activation
Broadband Internet connection required for Adobe Stock Photos* and other services
Mac OS
PowerPC G4 or G5 or multicore Intel processor
Mac OS X v10.4.810.5 (Leopard)
512 MB of RAM (1 GB recommended)
2.5 GB of available hard-disk space (additional free space required during installation)
1,024 x 768 monitor resolution with 16-bit video card
DVD-ROM drive
QuickTime 7 software required for multimedia features
Internet or phone connection required for product activation
Broadband Internet connection required for Adobe Stock Photos* and other services
*Online services, including, but not limited to, Adobe Stock Photos and Adobe Connect, may not be available in all countries, languages, and currencies. Availability of services is subject to change. Use of online services is governed by terms and conditions of a separate agreement and may be subject to additional fees.

Adobe Illustrator CS5 - Missing required plugins.BrS pencil tool/will not open program

Hi!
We hve downloaded a trial version of Adobe Illustrator CS5 and we are not able to open it. We followed Step 1 and Step 2 and then opened up the Zip version.I also have Windows Vista Home Premium Copyright 2007.
Would anyone know how I can access it?
Jana

Reinstall the app with proper admin privileges and also do run it that way. Sounds very much liek mundane permissions issues where some things don't get installed and/or the program cannot establish its user-specific configuration...
Mylenium

Adobe illustrator a cesse de fonctionner

Bonjour, bonsoir,
En esperant posté au bon endroit.
Voila j'ai la suite Adobe créative suite 5.5, donc Illustrator cs 5.1, le logiciel démarre bien, je peut me balader dans les différents menu mais lorsque je veut créer un nouveau fichier le logiciel plante et Windows me dit que adobe Illustrator a cessé de fonctionner.
J'ai essayé le fameux ctrl + alt + shift au demarrage, aucun effet.
J'ai désinstaller puis réinstaller Illustrator, le pb est toujours présent.
j'ai télécharge et exécuter le logiciel adobe support advisor qui me ressort toujours la même erreur avant et après désinstallation / réinstallation et re-demarrage : cpsid_82829s1 : Une erreur du programme d’amorçage s’est produite : « Redémarrage en attente ».
Cliquez ici pour plus d'informations et pour connaître les mesures correctives requises pour résoudre ce problème.
J'ai fait les étapes que le lien me donne:
Launch Windows Registry Editor.
(Windows Vista/ Windows 7) Choose Start, type regedit in the Search box, and press Enter.
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager.
Delete the InProgress key.
La clé n'existe pas.
Voilà, je ne trouve plus rien c'est pourquoi je me tourne vers vous.
Quelques info :
PHOTOSHOP fonctionne très bien
Ma config : windows 7 edition familial premium service pack 1 non piraté (je précise )
amd athlon II X4 645 3.1GHz
4Go de ram
c'est un acer predator G3100
D'avance merci de votre aide.

thenif,
Usted puede tratar de Move the folder o volver a instalar de nuevo, con el Cleaner Tool cuando se ha desinstalado y antes de volver a instalar.
http://www.adobe.com/support/contact/cscleanertool.html

Adobe illustrator cs3体験版の設定中

Windows Vista(TM) Ultimate32ビット
Dimension 9200C インテル(R) Core(TM) 2 Duo プロセッサー E6300
2GB(1GBx2)デュアルチャネル DDR2-SDRAMメモリ
以上の環境で下のような現象が起こります
adobe illustrator cs3体験版の設定中に問題が発生しました
のメッセージで前に進めません
セキュリティソフトの削除
スタートアッププログラム遮断
サービス　Windows以外遮断
新ユーザアカウント（管理者権限）でログイン　当試してみましたがだめでした
よろしくお願いします

Adobe® Illustrator® CS3 体験版を Vista PC にダウンロードして、インストールしてみました。
特に問題なく起動します。
この PC は、CS2 製品はいくつかインストールしていますが、CS3 製品は、インストールしていない状態でした。
ただし、Jscript.dll および Vbscript.dll は、登録されていない状態であっても、スクリプトは実行できていたようですが、念のため、regsvr32 で手動登録しています。
それ以外は、特に特殊な設定はしていません。
もし、Jscript.dll および Vbscript.dll の登録をまだ試されていないのであれば、試してみる価値はあるかもしれません。
以下は、テスト環境の詳細です。
PC: DELL INSPIRON 9200
OS: Windows Vista™ Ultimate (32bitOS)
CPU: Intel® Pentium® M processor 1.60GHz
RAM: 1024 MB
※セキュリティ関連は、Windows Live OneCare を使用

System Check Message: How do I close my Internet Explorer to install Adobe Illustrator CS3?

Upon installing Adobe Illustrator CS3, I cannot finish installing because system check tells me that Internet Explorer needs to be closed. I am using Windows Vista Home Edition Premium. I'm simply confused because I do not know exactly how to close Internet Explorer to finish my installation process. Any help would be appreciated, thank you!

hello, unfortunately when you search for this error message it appears that it might be related to malware that is active on your system and blocks file downloads.
please try to run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes], [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner], [http://www.microsoft.com/security/scanner/default.aspx microsoft safety scanner] & [http://www.kaspersky.com/security-scan kaspersky security scan].
if you can't download/execute any of those tools, you might want to try to boot windows into safe mode with networking support first and see if it works then: http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
[[Troubleshoot Firefox issues caused by malware]]

How do I drag / drop larger .psd or .jpg to Adobe Illustrator?

I am trying to use Adobe Illustrator to create 1-page advertisements for magazine publications. These advertisements have text, pictures and my business logo. Unfortunately, I can not drag my logo from Photoshop Elements (nor Photoshop) to Adobe Illustrator. The .psd of the logo file is 4 MB in size and a .jpg of the logo file is 700 in size.   I have no problem dragging small pictures that are ~150K in size.
Can someone please advise how to place the logo onto my Adobe Illustrator work space?
Is there a way to import the larger .psd or .jpg logo file directly into Adobe Illustrator?
Is there a better Adobe application to use for these ads?   (From a learning curve, I am comfortable with Illustrator and DreamWeaver and still learning Photoshop.)
My applications: Adobe CS3 Suite for web publishing as well as Adobe Photoshop, Adobe Photoshop Elements, Premiere Elements and Adobe Illustrator
My system: 8 GB Ram, MS Vista
Please help.   Thanks.

That works if all the data is available as a file at the point where you start the drag.
In my case it is not, I have got to go get it from the database, and that can take up to 30 seconds.
So I want to do that bit when the drop happens (which users are used to as for instance when they copy a large file in Windows at the moment), not when the drag starts (which is very difficult to provide any visual feedback for).

Adobe Illustrator CS6 (64 Bit)でpsdがリンク配置されたファイルが開けない

CS６スタンダードでAdobe Illustrator CS6 (64 Bit)をwin8のOSで使用しています。
最近客先で作成したファイルを開けなくなりました。
① 作成したファイルにpsdファイルがリンクされており
[○○○.psd]というリンクファイルの読み込みに必要なプラグインが見つかりません。「置換」を選択し別の・・・・
というメッセージがでます。
②新規作成でも配置でpsdファイルを設定しようとしてもエラーになり取り込めません。
③別のＰＣでは問題なく①のファイルも開けます。
CS6ごと再インストールを何度かしましたがだめです。
解決方法はないでしょうか？
気になるのは最近ですがプラグインで株式会社地理情報開発の
PlugX-Clipper2.5 win版をインストしました。
よろしくお願いします。

別のPCでは問題がないということですから、Illustratorの環境ファイル系かOS環境側に何か根っこがありそうですね。類似の報告は海外のフォーラムでも見かけましたが、いずれも回答がついていませんでした。おそらく開発者にデバッグしてもらわないと原因追及が難しいレベルの現象で、我々としては何かが壊れていると考えて対処するしかなさそうです。
ついては、まずはCS6の完全削除と再インストールを以下の文書を参考に徹底的にやってみるのが良いと思います。
以前のバージョンを含むすべての Adobe アプリケーションを削除し Creative Suite 6 を再インストールする（Windows 7/Vista）
インストールトラブル用の CS Cleaner Tool（Creative Cloud | Creative Suite 3/4/5.x/6）
PlugX-Clipper2.5については、一旦ここまで削除してしまえば、再度インストールするまでは影響は考慮しなくて良いのではないかと思います。
OS環境側に問題があるとすれば、OSのクリーンインストールまで考えなければなりませんが、これは正直しんどいですよね。たぶん一発で解決するとは思いますが……。
以下蛇足です。今回はエラー内容からプラグイン関連のトラブルである可能性は否定できません。プラグインはIllustratorの起動時に読み込まれ、プラグインが備える自身の機能をIll ustrator側に伝える仕組みを通じ、Illustratorが全てのプラグインの情報を整理統合して、Illustrator自身の機能の一部として取り込むのですが、整理統合に失敗してpsdファイルを取り扱うプラグインがどれだかわからなくなってしまうことはあるかもしれません。プラグインの情報はキャッシュしているようですので、一度失敗するとそのまま覚えてしまう可能性もあります。PlugX-Clipper2.5はファイル形式に関する機能は持っていないはずで通常は無関係と考えられますが、Illustratorが覚えているプラグイン情報を書き換えるきっかけにはなっているため、100%除外することもできません。問題の起きていない環境にPlugX-Clipper2.5を入れて再現するか確認し、もし再現したらクロということになりますので、余力があったら試してみて下さい……。

Remboursement abonnement adobe illustrator

Bonjour,
j'ai payé pour télécharger la dernière version d'adobe Illustrator. je n'ai pas pu la télécharger sur mon PC ( Toshiba windows vista)
Je 'narrive pas à joindre les service d'adobe imllustrator et ces derniers m'ont encaissé 2 fois 35€.
Comment dois je procéder pour me faire rembourser!
Cordialement
Géraldine

Géraldine,
A chat here (it is a bank holiday today),
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
or Adobe phone Support (only CC/CC2014),
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

Error message when starting Adobe Illustrator CC [Error loading plugins AppBarControls.aip]

Hello,
I get the following error message when I start Adobe Illustrator CC.
Error loading plugins
AppBarControls.aip
Then it gives me the option to continue by clicking okay. When it opens, the Application Bar is just blank.
I've tried uninstalling, then ran Adobe CC Cleaner, then downloaded and reinstalled.
Computer details : OS X 10.9.5, 1.3 GHz Intel Core i5, 8 GB 1600 MHz DDR3
Help is kindly appreciated!

I also have had a difficult time with Adobe Illustrator CC 2014 crashing upon launch. The support staff was great even though we had to work through several sessions. Below is the email explaining our final session.
This email is in regards with the issue you had been facing with Illustrator CC 2014.
While going through the installer logs, we found that there was an issue with the installation & the program installer had been denied access to several critical files & folders during installation.
This was the main reason for Illustrator crash as several critical components had not been installed properly.
We tried installing the program in a new user account & that worked.
Though the program has been installed properly now & is working in your old account, I will still strongly recommend you to get your computer user account repaired with a Windows 7 operating system diskette.
This is required so that you do not run into more trouble later while working with the Adobe Applications or even while installing other programs.
Avanish Divya was the final support person that successfully resolved my problems.

Type 10 error when starting adobe illustrator

Hi all,
Recently when I started adobe illustrator ver 10, i receive a time bomb and it gives me an error type10. I tried increasing the memory and also did a PRAM but the problem still persist.
Have anyone encounter this before, would appreciate if someone could help. By the way, when i started the photoshop apps. there is no problem. i am not sure if this is a illustartor error or should i look for updates, as it was working before this.
Thanks for all the help.
Lawrence

I also have had a difficult time with Adobe Illustrator CC 2014 crashing upon launch. The support staff was great even though we had to work through several sessions. Below is the email explaining our final session.
This email is in regards with the issue you had been facing with Illustrator CC 2014.
While going through the installer logs, we found that there was an issue with the installation & the program installer had been denied access to several critical files & folders during installation.
This was the main reason for Illustrator crash as several critical components had not been installed properly.
We tried installing the program in a new user account & that worked.
Though the program has been installed properly now & is working in your old account, I will still strongly recommend you to get your computer user account repaired with a Windows 7 operating system diskette.
This is required so that you do not run into more trouble later while working with the Adobe Applications or even while installing other programs.
Avanish Divya was the final support person that successfully resolved my problems.

Is Adobe Illustrator 10 Compatiable w/Vista?

Similar Messages

Maybe you are looking for