Is airport express 802.11n compatible with os10.7.5

I want to use my three year old airport express station to stream music from iTunes to my speakers. When I try to load my airport express software onto by OS10.7.5 imac I get the following error:
"airport can't be installed on this disk. Ther version of Mac OSX on this volume is not supported."
Can you help?

If you have an old AirPort Express, install AirPort Utility 5.6 with Pacifist in OS X

Similar Messages

Is Airport Express 802.11n compatibile with Airport Extreme 802.11g?

I can't get my new AExpress 802.11n to coexist with two other 802.11g AExpress and a AExtreme 802.11g. I have tried every type of reset and upgraded all soft/firmware but I can't see all three!
Do I have to ditch my older model Express (g) and Extreme (g) or try and get a second user old model Express (g)?
has anyone got a mix of old and new Express to co-exist?

good response. What to try? I'll admit it is a pain but this would be the basics:
1) reset it as many times as necessary to get it to be recognized
2) reset it with the power unplugged also
3) always use the airport icon found at the top of the desktop file menu(this is the key to find it there first
4) use the preferred pane found in the network pane within system preferences, delete networks that are odd or old and if you can get that express showing there you are almost home. Use the above three to do it also
This is why I got off those routers and now use two TC or two Extreme N or a combination of each. Ethernet as much as possible. Good luck
also
5) use ethernet to configure it then remove it, but once you set its wireless setting make sure you see it in the airport icon.
Message was edited by: Smokerz

Airport Express 802.11n problem

I have an Airport Express 802.11n.
I use it to send iTunes from my mac on my stereo system in the adjacent room, via my wireless network. I don't use it all that often. It has worked fine over the two or so years I've had it
A couple of weeks ago I had a new BT Home Hub 5 installed, this may be just a coincidence but I tried to use my Airport Express 802.11n yesterday with no luck. All I get is an amber flashing light. I've plugged the Airport Express 802 into the mains right next to my imac but that has not helped. My Airport Utility doesn't find or show my Airport Express.
What do I do? Can anyone help?
Hopefully
Rob

Here's an update:-
By re-setting my Airport Express 802 and updating the firmware, I can now get it to work when connected with an ethernet cable and changing my settings from DHCP to Bridge.
However, I still can't get it to work wirelessly.
Is this a known problem with the BT Home Hub 5 and BT Infinity?

Speed issue with TC and Airport Express 802.11n in WDS mode...

Here is my problem.
I replaced my older base station / Express duo with
a new Time Capsule (1TB) and a new Airport Express (802.11n).
I set up the network with the TC as base station running a WDS network (WDS main) and the Express is the WDS remote.
When I check the wireless clients from the TC, I find my iMac running at 130Mbits and the Extreme at 54Mbits.
No other wireless clients are connected to the network (I kept my slower network as a parallel one for my "older" Macs).
The only other connected device is my Dish network DVR that is connected via an Ethernet cable directly to the Express.
So my question is why does the Express not communicate at >54 speed rate with the TC?
And, why does my iMac connect with 130 and not with 300Mbits?
Any thoughts?

Instead of using WDS, you should take advantage of the "Allow this network to be extended" option that is available for the 802.11n AirPorts including the TC. WDS only operates in the 802.11g radio mode.
Here's the basic setup:
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility).

Speed issue with WDS, Airport Extreme, and Airport Express 802.11n

I have a Airport network set up using WDS and two airport base stations: an Airport Extreme 802.11n, and an Airport Express 802.11n. The Extreme is configured to be WDS main and is connected to my cable modem and other computers, while the express is WDS relay and acts as a switch.
I don't actually have any wireless clients connecting to the express. I'm using it to connect a mac with no airport card to the network by plugging it into the ethernet port on the express. For the most part, it works, and the mac gets a network address and can access the network. However, the connection speed from the Express to the Extreme seems slower than it should be.
Since both are 802.11n, and the Mac is plugged into the Express's 10/100 ethernet port, I figure the theoretical top speed that the Mac should be able to communicate with another device plugged into the Extreme is at around the same speeds as 100 mbps ethernet, since the 100 mbps ethernet connection should be the bottleneck in this case. In reality, the speeds are much slower: when I transfer files between a machine connected to the extreme (via ethernet) and my mac, the speed tops out at about 2 megabytes a second, if that.
I looked in the Airport Extreme's logs, and it indicates that the Express is only connected at 54 mbps, as though it were a 802.11g Express. I have no idea why this is! Also, the only wireless communication is between the Extreme and the Express, so one wireless device acting as a relay for another (and thus cutting the throughput in half) shouldn't be an issue.
Does anyone know why the speeds are so slow, and if there's anything I can do to improve them?

Hello Brian Kendall. Welcome to the Apple Discussions!
I looked in the Airport Extreme's logs, and it indicates that the Express is only connected at 54 mbps, as though it were a 802.11g Express. I have no idea why this is!
That is because you established a WDS which only runs in 802.11g. Since you have two 802.11n base station, you would want to take advantage of the "Extend a network" feature available with these base stations.
Here's a typical setup:
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility.)

HT1998 what is the latest update for Airport Express 802.11n with the Mac OSX10.6.8

what is the latest update for Airport Express 802.11n with Mac OSX 10.6.8?

You can find out as follows:
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click the AirPort Express
Click Manual Setup
Click directly on the word Version (3rd line)
If there are any updates, you will be notified.
If there are not any updates, you have already have the latest firmware.

Extending range of Linksys WRT310N router with Airport Express 802.11n

I am trying to extend the range of an existing wireless network set up with a WRT310N router with an Airport Express 802.11n - I've tried choosing both "Participate in a WDS network" and "Extend a wireless network" and both have run into problems.
Any advice would be greatly appreciated!
Thanks, Amy

amysinsh, Welcome to the discussion area!
Sorry but this is not possible.
It would be possible if the wireless network was created by another AirPort Express (AX), anAirPort Extreme base station (AEBS), or a Time Capsule.

Does airport extreme 802.11a/c work with airport express 802.11n

does airport extreme 802.11a/c work with airport express 802.11n

"You can use the AirPort Express to extend the signal provided by the new AirPort, but the Express will not extend "ac" wireless since it does not have that capability. The Express will extend an "n" wireless signal if that helps."
This is what I am trying to understand.
So AXTRM w/ sep SSID for 2.4 (b/g/n) - call it SSID1 - and 5GHz (ac) call it SSID2 - WiFi Explorer confirms AC mode on 5G.
Using an AXPRESS to extend - I have the option of SSID1 b/g/n *and* the 5GHz ac SSID2 in the pulldown (it sees both?) --> if I select SSID1, it also extends this same SSID in 5GHz (both showing b/g/n) >> so I now have 3 signals on SSID1 (XTRM 2.4G, XPRS 2.4G and XPRS 5G) b/g/n and one signal on SSID2 (XTRM 5G AC) ac
If I select the 5Ghz ac SSID2 to extend - it prompts me "do you also want to extend (the 2.4GHz SSID1)?" --> select yes and I now have 2 signals for SSID (XTRM 2.4G & XPRS 2.4G) b/g/n and 2 signals on SSID2 (XTRM 5G 802.11ac & XPRS 5G 802.11 a//n)
Is the 5G SSID2 actually being extended from the Airport Extreme to the Express?
The reason I bring this up is I am having a lot of issues since iOS8 came out (especially on iPhone 6). Everything I am reading is pointing to when people have 2 AP's set to use the same SSID. When you walk to a part of the house where 5G 802.11 ac signal marginalizes, the phone does not immediately hand over to the 5G 802.11 a/n Airport Express.
My thought was separate the SSID's but to me, if the Express can't extend 5Ghz from the Extreme, it's taking a step backwards. I am better off getting a more powerful router like an ASUS and going with one AP, drop the WiFi roaming altogether
Any thoughts?

Can connect a mac LAN Airport Express 802.11n to an existing PC's LAN...

Hi. In my company we have a PC wireless LAN with internet routed with DHCP and mac/wep security. Can the Airport Express 802.11n connect it to that network, and share the internet and win network to macs, conforming another intranet...?
Thanks in advance.
Sorry but I'm new in Airport topics.
Enzo.
iMac Intel Core Duo 2Ghz/2GbRam Mac OS X (10.4.8)

The new Airport Extreme can do this.
There is a bridging mode which will simply extend your network to wireless.
You have the option of a backwards compatible 2.4GHz mode. Which will support older WiFi hardware on Macs and PCs.
And there is a faster 5GHz mode which will work with newer Macs (and presumably 802.11n equipped PCs)

About My New Apple Airport Express 802.11n Wi-Fi Router

Yesterday on Saturday after i finshed work I Went out & Bought a New Apple Airport Express 802.11n Wi-Fi Router for My Apple iMac Computer & for My Apple iPhone 5 & Apple TV & I Set it up & everything & everything worked out well so i had a question about it, that Green Solid New Light on Apple Airport Express is it suppose to always stay on even if my Apple iMac Computer is Sleeping like other Wi-Fi Routers??? cause i'm wondering cause it looks Very Nice & White & Shiny & New & i don't really want it to Fail on me cause i do like it & it does not take up a lot of space witch is a good thing so just had to ask???
how many years will My Apple Airport Express Wi-Fi Router will last for since it's as Big an an Apple TV, just was wondering if this thing is really strong & stuff to like hold out for years time maybe???
will My Apple Airport Express Wi-Fi Router Software ever get Outdated like my other Wi-Fi Router??? & they stopped making that Belkin Wireless n Router that i had & they stopped Updating it's Software & then The Software became not usable at all so I Had to go out & buy an Apple Airport Express 802.11n Wi-Fi Router.

Hi Byron,
on the first question: take a look at your manual; I have a different router, and on it the light stays on all the time, but I don't know if the Airport works the same way. On mine, it simply means that it is on and ready in case you need it. You should worry when there is no light, LOL.
Second question: with electronics, can't tell at all how long they will be good for. They are made to be compatible with a certain range of devices and software - and will be updated for a while when those devices and softwares are updated. After a while, too many new routers are available with too many new features that are compatible with new devices and softwares, so it's not worth updating the old ones. It's a question of money - they don't want to give you free updates forever, they want you to buy a new piece of equipment.
Third: yes, it will at some point. Everything technology/electronics related is outdated - some very quickly: you buy a new one and the next week you see an ad for a "new, improved" one. Same principle: they want you to buy again.

Can an airport express 802.11n extend range of Netgear base stn?

can an airport express 802.11n model (i think it is two years old) work as a range extender for an existing base station (it's a netgear station, not an airport base) without having to hook up an internet cable to the Airport Express? --Bishop

Virtually no chance that the Express is compatible with a product from another manufacturer, but you can always give it a try.
Apple designed the "extend" feature to only work with other Apple routers.
If you have already been trying to do this and cannot, I think you already have your answer.

WRT160NL and AirPort Express 802.11n Connection

I have a Linksys WRT160NL that is currently connected to 2 Apple AirPort Express 802.11n via WiFi.
The connections are Cable Model via ethernet to WRT160NL
WRT160NL ethernet to PCs running XP and Vista
WRT160NL WiFi to laptops at 802.11g
WRT160NL ethernet to DirecTV HD Box
WRT160NL WiFi to Airport Express to ethernet connection of DirecTV HD Boxes (2 connections) (802.11g)
This current setup works. The hard wired components work as expected and the wifi to the AirPort Expresses work as well. The only issue I have is that the AirPort Expresses are only connecting to the the WRT160NL via WiFi at 802.11g speeds. I want to be able to conenct the AirPort Expresses at 802.11n speeds as I am having some streamin issues for High Def video. I verfied in the DHCP Client Table of the router that the AirPort Exresses are connected via "Wireless-G" to the routers. The AirPort Expresses are running the lastest firmware from Apple and I am running Firmware Version: 1.00.01 B17 on the router.
Any help/ideas on how I can connect the Apple Airport Express to the WRT160NL at 802.11n speeds? Are these 2 devices just not compatible with each other?

Thanks for the reply Scrooge. I have verified that the Apple Airport Express is 802.11n complaint:
http://store.apple.com/us/product/MB321LL/A/AirPort-Express-AirTunes?fnode=MTY1NDA0Mg&mco=MTA4NTc4MTE
I have also checked to make sure tha the router is set to Mixed mode:
Mode:     Mixed
Network Name (SSID):     xxxxxxxxx
Channel Width:    Standard - 20MHz Channel
Wide Channel:    N/A
Standard Channel:    2
Security:    WPA2 Personal
SSID Broadcast:    Enabled
The airport expresses are still connected at 802.11g according to the DHCP Client Table from the router. Is there any way to force the Airport Expresses to connect at 802.11n?
TIA

I recently switched from LinkSys to Airport Express 802.11n. I love it, but I can't get the Wii to talk to it so I can stream NetFlix. I've found MANY discussions on this, but it's still not clear to me. Anybody have a step by step so I can fix it?

I recently switched from LinkSys to Airport Express 802.11n. I love it...but now I my Wii can't see it so I can stream NetFlix. I have found MANY discussions on line about this...but it's still not clear to me. Anybody have a step by step way to fix this? Thanks! Jim Matherly

Well, the Airport Express is also compatible with 802.11a, 802.11b, and 802.11g. If your Wii is unable to connect to the wireless network, I recommended changing the wireless security of your network.
Open Airport Utility, select your Airport Express and click Edit. Navigate to the Wireless tab and change your security from WPA2 Personal to WPA/WPA2 Personal. Then click Update on the bottom right.

Unable to Connect Using New AirPort Express 802.11n

My mom purchased an AirPort Express 802.11n wireless router (AX) and I, as the designated "technology guru", was tasked with setting it up. Unfortunately, I am having problems out of the box.
When I connect it to the wall, it is found by AirPort Utility, but when I try to set it up, it is unable to connect to the wireless network. ("An error occurred joining the selected wireless network." "An error occurred, close the configuration window and try again.") This is annoying because I have an older AX and it was true to the "it just works" Apple mantra. It is also annoying because the error message has a comma splice.
Feeling pretty proud of my "technology guru" title, I come here to see what I could be doing wrong. I try connecting the computer directly to the router via ethernet cable. With this, I am able to setup my wireless network. I am still not able to connect to it. Additionally, once the AX has been configured, the AirPort Utility can't find it.
I tried updating firmware to 7.5.2. I've tried downgrading to 7.3.2. I've tried hard resets, soft resets. Every tip I could find I have tried. Please help. My self-confidence is wearing out.
Is it time for a call to Apple or a visit to the Apple Store?

Are you trying to configure the Express to "join" the wireless network?
If yes, the message you are receiving is likely an indication that you do not have the correct security settings selected for the Express. Unless the security settings between the wireless router and Express match up exactly, the Express will display the error that "an error occurred, etc".
The easiest way to confirm if you have this problem is temporarily set the main wireless router to "no security" and try to connect the Express that way. If you can connect, then you know that it is a security issue.
Please tell us the exact setting for security that the wireless router there is using and we'll try to give you some more ideas.
The Express will connect. It's just a matter of finding the right settings.
Message was edited by: Bob Timmons

After setting up my brand new Airport Express 802.11n and accidentally using it to connect my iMac to the network...my iMac no longer connects through Ethernet? Any ideas...I have tried everything without success!!

I have been using Apple technology for about 10 years starting with 1st generation iPods and our house now includes a 5 year old iMac, all versions of iPods and touches, Apple TVs (both generations) and most recently an iPad 2. I have always told family and friends that Apple technology just works. Unfortunately that stopped today. I bought a new Airport Express 802.11n to use for AirTunes around my new pool. I set it up from my iMac and accidentally used it to connect my iMac to the network for a short time. Now I can no longer connect the iMac to the network using a hard wired Ethernet cable. I have tried resetting everything possible, from hubs to routers to the Mac itself and it just will not connect to the network through Ethernet any longer. I am now a very frustrated Apple user especially when the support site says I can't use the fast path support because my product was manufactured 5 years ago...I just bought it at BestBuy yesterday. All other computers and itechnology in the house are connecting via wifi and Ethernet without any issue except from my new iMac boat anchor. Anybody who can help me??? Thanks

John, thanks for the email so quickly.
I too hope I haven't tried "everything" either but I am reasonably technical. I had done what you suggested to do before but I did both again.
Ethernet is yellow in the left side bar. In the right pane it's status says Connected but then below it says "Ethernet has a self-assigned IP address and will not be able to connect to the Internet."
I have tried the assist me menu and Network Status has Ethernet Green, Network settings Yellow, ISP Green, and Internet and Server Red and Failed for both. I have turned things off and on, checked cables, deleted all locations and tried restting them up but to no avail. I even disconnected everything and connected the mac directly into the cable modem itself and the thing still will not connect.
Thoughts???

Is airport express 802.11n compatible with os10.7.5

Similar Messages

Maybe you are looking for