Is airport extreme compatible with windows 8?

I have an airport express conected to my network, however I'm planing to buy a new airport extreme. Even though my ariport express works fine with my applec computers, I'm not able to print through it using a Windows 8rt Surface. Does anybody know if the new airport extreme is compatible with windows 8RT?

Hi - the answer is yes - it is compatible - most of the computers in our office use Windows 7 Professional and we have 10 Extremes in the network.

Similar Messages

Is the airport extreme compatible with windows 7 professional???

Desperately trying to figure out if the airport extreme is compatible with windows 7 professional..

Hi - the answer is yes - it is compatible - most of the computers in our office use Windows 7 Professional and we have 10 Extremes in the network.

Mac Mini Airport Extreme compatible with LEAP?

I'm looking into having our department buy a Mini for some Mac support we offer, and we'll have to use the wireless because nobody has a free port in their cube. Our wireless network uses LEAP authentication, and I'm not sure if the Airport Extreme support this. I checked Cisco's web site for vendor support, and Apple isn't listed there. (Or are their Airport cards manufactured by a 3rd party?)

I did a little more searching, and found that the Airport Extreme is compatible with LEAP.

Airport extreme compatible with MacBook Pro 15" 2.33 GHz ?

I just purchased a macbook pro and an airport extreme card to go with it. Now when I've researched it a little furhter I'm not sure if the airport extreme card will work with my new laptop. I received the card but am still waiting for the PC to arrive - anyone out there know if they're compatable with each other ? I've just switched from MS to Mac so I'm not all that familar with the hardware or op systems - thanks.
MacBook Pro 15 inch 2.33GHz Mac OS X (10.4)
MacBook Pro 15 inch 2.33GHz Mac OS X (10.4)

reablazey, Welcome to the discussion area!
The bad news is that your Mac is NOT compatible with the AirPort Extreme card.
The good news is that your MacBook Pro has wireless ability built-in. MacBook Pro (Late 2006) - Technical Specifications

Airport Extreme Compatibility with Windows Vista

I hope someone can help. I installed airport extreme and all my computers (Mac's and pc's on XP) can connect ok to the internet. The new laptop I just bought with Vista will not work. After two hours of tech support from Apple and then Toshiba, I learned that the router works when no security is selected, but when either available security level is selected, the laptop will recognize the router signal but won't connect to the internet. I downloaded the 7.1 Apple update and did a firmware update to the base station. Any ideas about this? It seems as though the security levels in the Apple router are not recognized by Vista. But I don't see an available fix to download.
Thanks for any help!

One possibility is to locate an older wireless access point and configure it in bridge mode and use it only for 802.11g wireless access to the network by the Vista notebook computer.

Is Airport Extreme compatible with G4 iMac?

I have purchased a Linksys Wireless router. I also have brought home from my office, a Dell PC.
What do I need to get the router to connect to my iMac? Do I need the Airport Extreme Card? Will it work with my PowerPC G4 iMac?

The easiest solution is to cable your iMac's ethernet port to one of the LAN ports on the Linksys router.
If you want the iMac to connect wirelessly to the Linksys wireless router, you will need to install an Airport card into it. Whether or not your "iMac G4" requires the original Airport card (no longer sold by Apple, but available used on EBay) or the Airport Extreme card depends on which exact iMac model you own. See this Apple article: iMac: AirPort- and AirPort Extreme-Ready Models
I'm guessing you probably own one of the first so-called "iMac Flat Panel" models (see this table ) and if so you need an original Airport card.

HT1145 The airport extreme used with my iMac is not seeing my other devices...anybody, please?

The airport extreme used with my iMac is not seeing my iPhone 5, iPad (third generation) or my windows based PC. When I open the airport utility it shows only the internet and my iMac. It does not identify the others. Any thoughts? Thanks

Hi DaileyT,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
When do Apple wireless devices appear in AirPort Utility?
http://support.apple.com/kb/HT3624
Troubleshooting missing devices
If your Apple wireless device doesn't show up in the wireless device list, try the following:
Check to see that the device is turned on.
Check that the device is connected to the network via Ethernet or in wireless range of your computer.
Make sure the device has had adequate time to start up and become discoverable. In the case of Apple wireless devices that are not connected via Ethernet, AirPort Utility scans for new devices once every 15 seconds. From the time a device becomes discoverable (typically around one minute), it could take up to another 15 seconds before the device is displayed in the list.
If you have just configured a new Apple Wireless device, upgraded the firmware, selected "Restore Default Settings..." or have hard reset and configured an Apple wireless device and it does not show up in AirPort Utility after restarting, you may have an incorrect setting. You may want to hard reset the unit and set it up again.
If you are connected to a specific wireless network, all Apple wireless devices which make up that network will appear. However, if you "Restore Default Settings..." from AirPort Utility, or hard reset a device that is out of physical wireless range of the computer, you will need to move the device closer the computer to configure it again.
Best of luck,
Mario

AirPort Disk - Issue with Windows Vista Ultimate

I setup an AirPort Extreme network, with a shared USB Drive and so far I've only found one issue.
When attempting to create new files and renaming them, or rename pre-existing files on the shared USB Drive using Windows Vista Ultimate I get the following Yes/No dialog:
"The Z:\ folder does not exist. The file may have been moved or deleted. Do you want to create it?"
Then there's information about the mapped drive. If I click "Yes" in the dialog, then the dialog goes away for a moment then pops back up. I can't create a new file directly on the shared AirPort Disk, nor can I modify or create and rename new files on the disk without getting stuck in the loop.
I can, however, create a new file locally on the Vista box and copy it up, and I can even create a new directory locally with files and copy them up without issue.
Now, the issue does not happen when I use my MacBook or my XP machine. This issues seems to be a Windows Vista issue only, and I haven't seen anyone else reporting it.
Here's information about the disk share implementation:
- The disk is password protected (turning on accounts really breaks the ability of Windows Vista to work with the disk)
- The disk is Mac Formatted with Case Sensitivity, and Journaling
This works like a top for OS X and Windows XP, just not Vista. I'd like to getting working properly for all machines.
If anyone's got some advice on this one, I'd love to hear it.

Here's a little more information regarding the issue:
- It's an AirPort Extreme Wireless Router with Firmware ver. 7.1
- The Windows Vista Ultimate PC has the most recent Microsoft patches to-date, and has the most recent Apple Airport Utilities Software to-date.

How to access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

How can I access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

...Called it a roaming network. Wireless mode is create a wireless network. I have checked allow this network to be extended. Probably need to uncheck that?
Yes, that option should be deselected as it only pertains to when both routers are interconnected by wireless. Since you have a roaming network, they of course, would be interconnected by Ethernet.
The other important settings for a roaming network are:
Each router must have a unique station name. For the AirPort, this would be called its Base Station Name. I believe the default station name for Linksys routers is: linksys
Each router must broadcast a wireless network with an identical Network Name. For the Linksys, Network Name is the same as its SSID.
Each router wireless network must use the same Wireless Security type and password. The Linksys WRT-54G is capable of up to WPA2 Personal. If you have it set to this level of security, the AirPort should be at the same setting.
Make sure that each router is not on the same Radio Channel for the 2.4 GHz radio. In the US, there are basically only three non-overlapping channels: 1, 6, or 11. Set each so that they don't use the same channel but use of those three choices.

I recently purchased an older model computer with Microsoft Me from 2000. It doesn't have a web browser and I would like to download Firefox. Where do I find the download compatible with Windows Me and how do I download it?

I have looked in your web site product downloads and I am unable to find a web browser download that is compatible with Windows Me from 2000. What am I missing? Is there a web browser download that is even compatible? It is just a second computer for my grandsons to use and do homework on, but I am unable to get up the internet.

Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
Get it from here:
ftp://ftp.mozilla.org/pub/firefox/releases/2.0.0.20/win32/en-US/

Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

HP Smart Web Printing has been replaced with HP Smart Printing. It does support Windows 7 and IE 6 to IE9. See this page for information.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Latest version of firefox program is not compatible with windows 7

After I updated the latest version of mozilla firefox in my laptop which is a windows 7 program,it doesn't work anymore. Every time I open the firefox, the screen goes black and I can't see anything on the screen but black. And when I troubleshoot and fix the problem, it says that "COLOR SCHEMES IS NOT COMPATIBLE WITH WINDOWS 7". Program compatibility is the 1.5 version or 1.0. How to fix this one? I uninstalled and already installed a new one but still to no avail the problem is still the same. Should I install the older version? Where to download the older version? It seems that in mozilla firefox website, only the latest version or the 3.0 version is available.

hello Gracerilla, other users with this problem all had an embedded intel hd3000 graphics card with an old driver present. in case this also applies to you, here would be a link to update the driver, which in turn should also address the black firefox problem: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764 (for win7 64 bit)
in case this doesn't solve the issue or does not apply to your system, start firefox into safemode '''by pressing the shift key while the application is launching''' & disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Is office home and business 2013 compatible with windows 8.1?

I have read several issues with installing Microsoft home and business 2013 and the system running right on windows 8.1 has the issue been resolved or is there another version of Microsoft home and business I should download?

Hello,
In theory, Microsoft Office Home and Business 2013 is
compatible with Windows 8.1. You can check if your system meets the requirements by clicking the Requirements tab in the webpage below:
http://www.microsoftstore.com/store/msusa/en_US/pdp/Office-Home-and-Business-2013/productID.259321600
Thanks,
Steve Fan
TechNet Community Support

Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?

Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?
Operating System: Windows Version 8.1 PRO
When I upgraded from Windows 7 to Windows 8.1, my HP Photosmart Premium all-in-one C309n-s
stop working. Is this printer not compatible with Windows 8.1 PRO? Is there any update for this?

Hey,
HP Photosmart Premium all-in-one C309n/g printer is compatible for Windows 8.1
Please uninstall your printer's old software then install new one for windows 8.1.
HP Photosmart Premium All-in-One C309 Series Full Feature Software and Driver :
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109711-1&cc=us&dlc=en&lc=en...
Kevin_US_CA
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the left side of my post to say thanks!***

So apparently Itunes is not compatible with Windows 8. Are you planning on fixing this problem any time in the near future?

So apparently Itunes is not compatible with Windows 8. Are you planning on fixing this problem anytime in the near guture?

Hey kriscro2,
Thanks for the question. iTunes 11.1.4 is compatible with Windows 8, as outlined on the System Requirements page:
Apple - iTunes - Download iTunes Now
http://www.apple.com/itunes/download/
If you are having issues installing iTunes on your Windows 8 computer, see this resource:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M.

Is airport extreme compatible with windows 8?

Similar Messages

Maybe you are looking for