Is airport just a router or does it do backups too?

does airport do backups or is it just a router?

AirPort Express and AirPort Extreme are wireless routers.
A Time Capsule is essentially an AirPort Extreme with a built in hard drive, so it is capable of backups.
Compare the products here:
Compare Apple Wi-Fi base stations AirPort Express AirPort Extreme Time Capsule

Similar Messages

What is the transfer rate of an airport express extreme router?

I am buying a router and I could not locate (in the package) the transfer speed rate of an airport express extreme router. Does anyone know how they compare to other commercial routers, from say Cisco?

Yes it is interesting to look at the speed of technological advance. I first started using an Apple about 30 years ago when they had floppy discs rather than hard drives. Mine had two floppy disc drives so I could work all day without swopping discs (single disc drives needed you to swop the data disc and the programme disc every so often as the Ram on the machine was limited. Since then I have up-graded every 4 to 5 years (approximately every other operating system upgrade)
Before that, in the 1970's we were changing from slide rules to electronic calculators which got steadily better and cheaper. The early Anita Calculator (with valves) cost as much as a small car - now they give simple calculators away with Christmas Cards.
I wonder how much further the technology behind the home computer will go before further advances, like those in calculators, become pointless from the user's point of view. Maybe it will take another 10 years or so but once everything we want to do is incorporated into a voice driven computing device possibly storing data in the cloud, then it will be the reliability of the components that will be the benchmark of a good system and having the latest "fastest" model will be far less important.

HT4628 I recently transferred my internet service to another state. Have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the i

I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Is airport extreme a modem or just a router?

is airport extreme a modem or just a router? (do i have to plug it in to phone line or cable/dsl modem?) i dont want to lease a cable modem unless i have to. (expensivo!)

An AirPort Extreme base station (AEBS) includes a 56k modem for connecting to a dial-up ISP.
If you are using DSL or cable for Internet, you will need the appropriate modem in addition to the AEBS.

HT4145 Does the new Airport Extreme allow "guest network" setup across all my Airports on my network? I have 1 Airport as a router and 6 others as WAP's (bridged)

Does the new Airport Extreme allow "guest network" setup across all my Airports on my network? I have 1 Airport as a router and 6 others as WAP's (bridged)

I assume that all of your WAPs are hard wired on the network.
If.....all of your WAPs are simultaneous dual band Apple AirPort devices like an AirPort Extreme or new AirPort Express.....and.....you have firmware version 7.6.3 (now 7.6.4) installed on all the AirPorts.....and.....you use AirPort Utility 6.3.1 to configure the devices......in theory.....it should work.
I don't have 6 WAPs, but I do have 3 and the network works perfectly allowing extension of both the "main" and "guest" network.

How to configure Airport Express N router and Netgear G router with Extreme

I have a primary Netgear G router (WRT54G) connected to my cable modem box. I have an Airport Express N router streaming music in another room and also extending the wireless network.
I am planning to demote the Netgear router as a switch + wireless network extender connected to my home theater setup (dish+apple tv+ps3) and purchase a new dual band Airport Extreme connected to the cable box and acting as the main router.
My question is if its possible for the N devices to still use N network while the G devices not demoting the whole wireless network to G? That's the reason why I want the Extreme. If yes, how to go about doing it? If not, I will just buy a cheap switch and use that for the Home theater and leave the current setup alone. Anyone who has a similar network, please advice. Thanks!

My question is if its possible for the N devices to still use N network while the G devices not demoting the whole wireless network to G?
Yes. To do so, you would need to connect the Netgear to the new 802.11n AirPort Extreme Base Station (AEBSn) by Ethernet, and then, reconfigure it as a bridge (disable both its NAT & DHCP functions).
In this configuration, the AEBSn & AXn can provide the 802.11n network and the Netgear can provide the 802.11g network.

You must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

I tried to answer in your other post.. please stick to one thread ..
What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default.

Airport Express as Router?

Does the Airport Express assign IP addresses? Is the Airport Express a router?

Insure that the Router Mode is set for DHCP and NAT.

Is Airport Express a router

With all this information out there I can't seem to find a straight answer so maybe someone can help.
Is the Airport Express a router with just one ethernet port, or is the point or a router that you can have more than one port.
I am thinking of buy the sonos digital music system http://www.sonos.com/
however as far as I can tell the first unit needs to connect to the ethernet cable on the Express then subsequent others can connect wirelessly.
There is also some info at this address with regards to routers with no ports available but I still can not understand it
https://sonos.custhelp.com/cgi-bin/sonos.cfg/php/enduser/stdadp.php?pfaqid=193
I would really like to know if I have to buy lots of additional components before I invest in this system]
Thank A LOT
Jo

Most so-called wireless routers are actually wireless+wired routers, meaning that both wireless and wired machines can connect directly to them.
When configured as a router, the Airport Express is a wireless-only router. You can directly connect wireless machines to it but not wired machines.

Trying to clarify what these are: is airport extreme a router? What is airport express?

Trying to clarify what these are: is airport extreme a router? What is airport express a router as well?

SimonJester753 wrote:
It was a long time ago. I remember wanting to connect my desktop mac via an ethernet cable, but the setup assistant was insisting on wireless. I think I finally took out the wireless card from my Mac so it would use the ethernet cable. Eventually I put the card back.
The zillion and one setting to wade through might mean more choices to the tech-heads, but I just wanted it to work.
I don't recall the type of router we had at my previous job, but I just plugged it in, went through a simple set up and forgot about it because it just sat there and worked.
I have had to go back to factory settings and start from scratch with my Extreme many times. The last time the amber light started blinking I just ignored it for months, because it didn't effect my internet connection, I just lost the ability to get iTunes over to the Express I have hooked up to my stereo.
BTW, what's a wall wart?
The big box on the cord.

I have an Airport Extreme wireless router & I can not connect my Kindle.

I have an Airport Extreme wireless router & I can not connect my Kindle. Also, my password will not work when a visitor uses it for a laptop (even a Mac) or any other device that uses the internet. It says the password is incorrect. I easily connected a Kindle last year, but I got a new one & now I can not connect wirelessly. I see no tab to create a guest network. I do not mind giving my password to visitors, but that does not work.

If you temporarily disable wireless encryption on your 802.11n AirPort Extreme Base Station (AEBSn), can the Kindle connect to the router and gain access to the Internet now? If so, then I would suggest that you reconfigure the AEBSn to use "WPA2 Personal" for the Wireless Security setting, and then, try connecting with the Kindle again.
As far as establishing a Guest Network, the AEBSn must not be in bridge mode. That is, it should be the only router in your current network and directly conncted to the Internet modem. If it is, then you would find the Guest Networking option on the AirPort > Guest Networking tab:

I have an airport extreme 2013. Why does my airport utility sometimes display IP addresses and other times the names of the devices? I want it to always display the device names.

I have an airport extreme 2013. Why does my airport utility sometimes display IP addresses and other times the names of the devices? I want it to always display the device names.

The utility has had less and less useful information .. it might be time to simply find a different utility.
Fing network scanner. iphone and ipad.
https://itunes.apple.com/au/app/fing-network-scanner/id430921107?mt=8
This is very popular.. I do not know of what works well on Mac OS because i have installed 5.6 utility which of course has far more info than the later toy version. Plus using an Asus router which has excellent listing of all the clients.
Sometimes beating yourself up to make apple routers do what you want is easier solved with lateral thinking.

My router WRT54GX does not note the version.

I want to update my router as we are going to network and the router case does not note what version. The software is version 1.1. Does this mean that my unit is a v1?

If there is no any version number for your router then its a version 1 router.You could just logon to www.linksys.com/download & upgrade the firmware by clicking the Administration tab on the setup page.

Hey Guys, from Germany. I want to connect my iMac 21" with my Tv just for fun. Does anyone know, how it works. With a Hdmi adapter?

Hey guys! I want to connect my Imac 21 " with my Tv just for fun. Does anyone know , how it works?

Selecting the correct adapter and cable depends on which year model iMac you have and what inputs the TV has?
Check the User's Guide that came with your iMac or your Spec's at > Apple - Support - Technical Specifications
to see if your iMac has a Mini-DVI or Mini DisplayPort and then select that adapter with the correct connection for the TV.
Example: if you have a 2010 or 2011 iMac and an HDMI ready TV, then you would want the > Moshi Mini DP to HDMI Adapter with Audio Support - Apple Store (U.S.)

I want to set up my Epson printer using an airport and RR router. It was previously set up using a different router through HTC but same printer. How do I do this?

I want to set up my Epson printer using an Airport and RR router. The same Mac Book and printer was formerly set up using a HTC router. How do I reset computer so it communicates with printer?

http://support.apple.com/kb/HT3771
Mac 101: Printing (Mac OS X v10.6)

Is airport just a router or does it do backups too?

Similar Messages

Maybe you are looking for