Is airport the only wireless that can be used on an imac?

Is airport the only wireless that can be used on an IMac, or can d link be used?

You can use any brand or model of WiFi access point you wish, if that's what you mean. I've used Cisco, D-Link and others as well as Apple's own Airport access points.
Regards.

Similar Messages

Safari is the only application that can successfully use the internet.

Dear all,
I have been having internet problems for the past couple of weeks, that started fairly suddenly. The problem is that any of my internet-using applications cannot use the internet, apart from Safari. Browsing and downloading through Safari work seamlessly, but all other uses of the internet fail.
For example, Messenger for Mac gives me a message indicating that I am not connected to the internet. Skype also does this, and the iTunes Store tells me that the host is down, and that I should check my internet connection and try again. Software Update is another application that cannot function as a result of this problem.
I am living in student halls at university, so my internet connection is an ethernet cable plugged into the wall, and therefore I have no access to the behind-the-scenes things. I have contacted my internet provider (Ask4), to ask if they'd changed anything, but they said not, but are very willing to do anything they can to help me.
It has been suggested to me that I simply create a new location in network settings, and that this would remedy the problem, but it didn't work.
Another suggestion was to temporarily disable the firewall, but this also didn't help.
Does anyone have any suggestions as to what I could try next, because I'm all out of ideas, and I can't find anyone with the same problem.
Any help would be well-appreciated.
Thanks
Tom

i figured it out. reboot the phone. its an ios4 bug that once you turn the orientation lock on once and back off, the photos wont rotate and you have to reboot. hopefully a fix comes soon

Is iTunes 6.0.1 The Latest Version That Can Be Used On G3 iMac 600?

I have a G3 iMac 600 using OSX 10.4.11 which is the latest OS it can support.
iTunes 6.0.1 appears to be the latest version supported by this iMac as I can't get anything newer via Software Update and iTunesX lists a G4 as minimum requirements.
Is this correct?

Hi, Ian,
iTunes 8.2.1 is, I believe, the last version that would work on your G3:
http://support.apple.com/kb/DL857
Regards.

Is apple tv the only item that can be connected to a tv for airplay to work? Looking for something smaller for the office

Is apple tv the only item that can be connected to a tv for airplay to work? Looking for something smaller for the office

How big do you believe an ATV is? They are tiny compared to most devices.
The ATV is the only AirPlay receiver, short of an actual AV receiver with AirPlay support, but those are MUCH larger.

Want my JFrame to be the *only* one that can end the program when closed

Hi all,
I have an application that is essentially a launcher for other applications -- it's a holder to allow us to demo our work and other Java examples (not necessarily our work). The launcher will either run methods to launch an application or will find a class's main method and invoke that.
In all cases, the other applications open up their own JFrames, separate from my launcher (this is a good thing). The problem is that, in general, the other JFrames are set to EXIT_ON_CLOSE. This means that if the user closes the second window, everything will close.
Is there anyway to prevent this from happening? I'd like either a way to say that my JFrame is the only one that can exit the program when closed, or to say globally that JFrames can't exit on close, and then re-work my initial frame so that it is still able to exit.
Note that changing all the other applications so that they do not include the EXIT_ON_CLOSE line is not an option (several of the applications we have the right to use, but not the right to modify, for instance).
Any thoughts?
Thanks,
Sam

Darryl.Burke wrote:
I have a similar launcher application and this is how I tackled the issue....
Window[] windows = Window.getWindows();
This seems like a great work-around. The only problem is that Window.getWindows() is only 6.0, and unfortunately I can only assume 5.0. I can't see another method in the Window class that will return unowned windows -- is there another method that you know of?
Edit: I found I can use Frame.getFrames() instead, but unfortunately I've discovered this doesn't solve my problem. One of the applications is listening to window closing and is calling System.exit(0) itself, and is not using EXIT_ON_CLOSE as I previously thought. So I think that launching a new JVM may be the only option.... Any advice on how to do this? I'm a little stuck with the ProcessBuilder stuff above.
>
edit In future (not this time), Swing related questions should be posted in the [Swing forum|http://forums.sun.com/forum.jspa?forumID=57]
I guess I was thinking this as a process-oriented question (I had already been thinking of the "different JVM" tactic), but the other option was to think of it as a pure-swing problem, like your solution above. Guess I should have just cross-posted -- everyone loves that! ;-)
Edited by: Asbestos on Dec 18, 2008 12:32 PM

Has anyone tried to trade in the their iphone5 for the gift card that can be used to buy iphone6?

Has anyone tried to trade in the their iphone5 for the gift card that can be used to buy iphone6?

csa3, I want to make sure you are able to take advantage of this offer. Have you submitted a Preorder for the iPhone 6? If so, you can submit your appraisal before September 30, 2014 using the following link: http://bit.ly/GGnDDC
AndreaS_VZW
Follow us on Twitter @VZWSupport

Is Final Cut Pro the only software that can open video .MXF files for Macs?

Hello,
Many thanks in advance for your attention.
Trying to find software that will edit .MXF Video Files to work with Mac.
As the edit is simple, prefer iMovie, but happy if the Conversion software only works with FCExpress (or even FCPro if that is the only alternative).
1. If it matters, .MXF (Material Exchange Format) Video files came from shooting on a Panasonic 500 P2. Originally downloaded onto a Windows system, using Adobe Premiere.
2. I just want to see and convert some of the shots I did for my Reel, etc., but I have a Mac.
3. I have iMovie HD, iMovie 09, and FCExpress (which I don't know how to use that well).
4. When I attach an External HD with backup files of all the footage shot, they show up named as .MXF files. They appear as VLC files (VLC icon), but the suffix is .MXF.
5. When I try to play them as VLC files, they won't play. It seems they start to play, but then the VLC software quits.
6. So I have tried downloading some software on the Internet that Google says converts .MXF files.
I tried: iSkysoft Video Converter, AVCWare Mac Video Converter, MPEG Streamclip, and a couple others. They all seem to have basically the same conversion setups, but when I click to pick one .MXF file, none of them recognize it. (The file in my Browse window is greyed out).
7. MoyaVideo Converter for Mac recognizes the .MXF file, but when I hit the "conversion" button - I tried a couple different settings, all it seems to convert is the first frame. Even if the .MXF file says a clip is 123MB or 43 seconds long, etc.
8. I can't even watch the clip in Preview. Press Play and it is just the first frame.
9. I have read elsewhere in these forums, some people touting conversion software from a company in Germany - mfxformac. I am fine with paying for conversion software, but $500?
10. And I have read elsewhere that only Final Cut Pro has a codec that will open .MXF files. If this is so, why do the above companies claim to have software that opens .MXF files for Mac?
11. Isn't there a further problem if I can't even see the video using VLC? Or is that because I am using Mac and need FCPro with the right codec?
Anyone's help would be greatly appreciated.

MXF files from P2 can only be imported using FCP. iMovie can't, nor FCE...if you are talking about APPLE software. Avid deals with MXF files natively. But FCP will ONLY import them if the entire P2 card structure is intact. Please tell me that you have the entire P2 card backups. If not, then it won't work. If you do...then here is the process for importing into FCP:
P2 Workflow with FCP 6
3. I have iMovie HD, iMovie 09, and FCExpress (which I don't know how to use that well).
Then you need someone to provide you with QT files of this footage. None of them work with P2.
NONE of the converters you listed will work... Sorry.
9. I have read elsewhere in these forums, some people touting conversion software from a company in Germany - mfxformac. I am fine with paying for conversion software, but $500?
That software is to get it to work with Final CUt Pro natively. What it doesn't do is convert the footage to QTs. There is also Raylight and Calibrated...but again, they are for FCP.
P2 is a professional format, and to use it you need professional software. iMovie won't work...nor will FCE. If you need to work with it in those formats, you need to have someone import the files and convert them to AIC (Apple Intermediate Codec).
HD Log might work...but not sure what QT format it converts to. A demo is available.
http://www.imagineproducts.com/index.php?mainpage=product_info&cPath=1&productsid=4&zenid=b2buo1aguk3cplmg23jn05aai7
Shane

My website that I designed will not work in Firefox. The only page that can be viewed or browsed is the home page no other pages work how can I remedy this issue?

My website www.gtecht.com works on other browsers. When viewed in Firefox only the home page works. How can this issues be fixed.

Type '''about:addons'''<enter> in the address bar to open your Add-ons Manager.
Hot key; '''<Control>''(Mac:<Command>)''<Shift> A)'''
In the Add-ons Manager, on the left, select '''Extensions.'''
Disable a few add-ons, then '''Restart Firefox.'''
Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
If the problem continues, disable some more (restarting FF). Continue until
the problem is gone. After, you know what group is causing the issue.
Re-enable the last group '''ONE AT A TIME''' (restarting FF) until the problem returns.
Once you think you found the problem, disable that and re-enable all the
others, then restart again. Let us know who the suspect is detective.

Is this the only tablet that can use iTunes? Or can you use Android Tablets with iTunes?

I'm looking into buying a tablet... But can i get my music from iTunes onto different tablets like the android 2.2...? Or just iPads? Can someone please help?! I'm going black friday shopping soon...!

Nope, I personally do not like android.
I find it to be annoying in a lot of little ways.
I have used both a phone(galaxy s) and have a cheap tablet(archos 70).
The only reason to get an android device is if you can not live without being able to fiddle with 100's of different settings, widgets, screen animations, etc to totally customize the device or you cannot afford an iPad and will accept one of the cheaper tablets realizing you are getting a pretty poor substitute.
In the case of cheap tablet-Nook Color tablet is probably best choice. In another month or so xda will crack it and have some really good ROMs for it.

HT4113 anyone else have a problem with the iphone 4s locking and not able to unlock even though you keep entering the only code that you have used?

Anyone else having a problem with the iphone4s locking and not letting you in even though you keep using the only code you have entered from the begginning?

No. You are the first person out of 900 million users to have this problem.

Is AirPort a cellular connection that can be used out in the country?

Can the AirPort be used out in the country?

If you are saying that you only have celllular service, you will need an adapter like the example shown below to be able to connect an AirPort Extreme.
http://www.wirelessnwifi.com/Cradlepoint-CBR400
Make sure that the device you choose will support your cellular service before you buy any product.

How come my phone will no longer hook up to my work wi-fi? it has for almost 2 years and all of a sudden it does not. I am the only one that can not get on.

My phone is no longer hooking up the my Wi-Fi at work. I has for almost a year and now all of a sudden it will not. Everyone can hook up so they did not change anything as far as the Wi-Fi. It hooks up at my Wi-Fi at home fine and other areas, just at work is the problem. What could be causing this? I am using the Motorola Moto Rzr

Could be your work banned your particular MAC address or some such. Maybe they ran an analysis on network usage and type of use and found you to be a large consumer on their network. IDK what type network you are on or business you work at. I know it's been done before to curtail employee efficiency. Otherwise, you may need to speak to the administrator of said network.

Am I the only one that can't see anything on the download page...

to download itunes 7? I just see the page but nothing to click on. Has it been taken down because of problems?
Thank you

The inimitable b noir has reported that one cause of this problem relates to the Norton Internet Security Suite.
for a moment there i thought i had been whisked back in time to the itunes 4.9/5.0.x days, my dear The Mimico Kid.
... i'm calling this one "god-daughter of no button syndrome" ...

My friend trys to contact me and he is the only friend that can not get through ?

My friend emails everyone and I never get his messages ? Where do I go to checked if hes blocked ? What could be wrong ? my messages go to him ! Thanks for your help

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Try changing the security on the router. Starts with no security as a test.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Does anyone know if there is a list of the functions/statements that can be used in the formula parsing (used in the VI Eval Formula String)? I

have figured out a few already (ln(x), log(x), x^y, sin(x), asin(x), sinh(x), asinh(x), sqrt(x), pi(x), exp(x) ) but a complete list would be very useful. At the moment I am trying to figure out if it can handle factorials (x!). Any ideas? I am using LV6i.

have figured out a few already (ln(x), log(x), x^y, sin(x), asin(x), sinh(x), asinh(x), sqrt(x), pi(x), exp(x) ) but a complete list would be very useful. At the moment I am trying to figure out if it can handle factorials (x!). Any ideas? I am using LV6i.Such a list is in Chapter 1 of the "G Math Toolkit Reference Manual". Please note that there are some differences to the formula node. Therefore, the help on the formula node lists some functions, that do not work with the Parser VIs.
You can get the G Math manual from: www.ni.com/manuals
Just search for "math".
Hope this helps!
Robert Buhrke, Systems Engineer
Contact: [email protected]

Is airport the only wireless that can be used on an imac?

Similar Messages

Maybe you are looking for