Is an AP got problem with multiple regulatory domain?

Hello,
Our customer in China reported that they got poor 2.4GHz wireless quality(i.e.slow response, slow data transfer). But these not happened on 5GHz band. The main WLC installed in Bangkok, Thailand. This controller take controll all their APs over the country and oversea branchs. We checked into the AP configurations and saw this..
Regulatory Domains: 802.11bg:-E    802.11a:-C
Country Code: CN (China)
AP Part:     AIR-CAP2602I-C-K9
After we checked these tables
(http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/product_data_sheet0900aecd80537b6a.html#wp9005671)
All regulatory domains for this AP should be -C right?
We followed this page for configuring China country code.
(http://www.cisco.com/en/US/docs/wireless/controller/7.4/configuration/guides/lwap/config_lwap_chapter_010000.html)
I got noticed in guidelines and limitations
Although the controller supports different access points in different regulatory domains (countries), it requires all radios in a single access point to be configured for the same regulatory domain. For example, you should not configure a Cisco 1231 access point’s 802.11b/g radio for the US (-A) regulatory domain and its 802.11a radio for the Great Britain (-E) regulatory domain. Otherwise, the controller allows only one of the access point’s radios to turn on, depending on which regulatory domain you selected for the access point on the controller.
So, this should be a problem? or I hit a bug?
WLC information:
Part:                                       AIR-CT5508-K9
Version:                                  7.3.112
Configured Country Code(s):     TH,US,CN
Regulatory Domain:                 802.11a: -ACE, 802.11bg: -ACE
Thank you.

This is not a bug. Refer to Cisco TAC response.
Its not a bug, from the WLC you can run the command:
Show country supported tx-power
(WLC-5508-RAC1) >show country supported tx-power       KEY: ## = Tx Power in dBm.
           ##*= Channel supports radar detection.
            . = Channel is not legal in this country.
          = Regulatory Domains allowed by this country.
          (-,-) = (indoor, outdoor) regulatory Domains allowed by this country.
-----------------:+--+--+--+--+--+--+--+--+--+--+--+--+--+--
    802.11BG     :
    Channels     :                             1 1 1 1 1
                 : 1 2 3 4 5 6 7 8 9 0 1 2 3 4
-----------------:+--+--+--+--+--+--+--+--+--+--+--+--+--+--
(-CE ,-CE ) AE : 20 20 20 20 20 20 20 20 20 20 20 20 20 .
(-A   ,-AR ) AR : 27 27 27 27 27 27 27 27 27 27 27 . . .
(-E   ,-E   ) AT : 20 20 20 20 20 20 20 20 20 20 20 20 20 .
(-A   ,-NA ) AU : 27 27 27 27 27 27 27 27 27 27 27 . . .
(-E   ,-    ) BA : 20 20 20 20 20 20 20 20 20 20 20 20 20 .
(-A   ,-    ) BB : 27 27 27 27 27 27 27 27 27 27 27 . . .
(-E   ,-E   ) BE : 20 20 20 20 20 20 20 20 20 20 20 20 20 .
(-E   ,-E   ) BG : 20 20 20 20 20 20 20 20 20 20 20 20 20 .
(-E   ,-    ) BH : 20 20 20 20 20 20 20 20 20 20 20 20 20 .
(-E   ,-    ) BN : 20 20 20 20 20 20 20 20 20 20 20 20 20 20
(-A   ,-A   ) BO : 27 27 27 27 27 27 27 27 27 27 27 . . .
--More-- or (q)uit
(-A   ,-AR ) BR : 27 27 27 27 27 27 27 27 27 27 27 . . .
(-E   ,-    ) BY : 20 20 20 20 20 20 20 20 20 20 20 20 20 .
(-A   ,-ABN ) CA : 27 27 27 27 27 27 27 27 27 27 27 . . .
(-A   ,-ABN ) CA2: 27 27 27 27 27 27 27 27 27 27 27 . . .
(-E   ,-E   ) CH : 20 20 20 20 20 20 20 20 20 20 20 20 20 .
(-AER ,-AR ) CL : 20 20 20 20 20 20 20 20 20 20 20 20 20 .
(-E   ,-E   ) CM : 20 20 20 20 20 20 20 20 20 20 20 20 20 .
(-CE ,-CE ) CN : 20 20 20 20 20 20 20 20 20 20 20 20 20 .
And for 802.11a:
-----------------:+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--
   802.11A       :                                      1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
   Channels      : 3 3 3 4 4 4 4 4 5 5 6 6 0 0 0 1 1 2 2 2 3 3 4 4 5 5 6 6 6 7
                 : 4 6 8 0 2 4 6 8 2 6 0 4 0 4 8 2 6 0 4 8 2 6 0 9 3 7 1 5 9 3
-----------------:+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--
(-CE ,-C   ) AE : . 23 . 23 . 23 . 23 23*23*23*23*30*30*30*30*30*30*30*30*30*30*30*23 23 23 23 23 . .
(-A   ,-A   ) AR : . 23 . 23 . 23 . 23 23*23*23*23*23*23*23*23*23* . . . 23*23*23*30 30 30 30 30 . .
(-E   ,-E   ) AT : . 20 . 20 . 20 . 20 20*20*20*20*27*27*27*27*27*27*27*27*27*27*27* . . . . . . .
(-NZ ,-NZ ) AU : . 23 . 23 . 23 . 23 23*23*23*23*30*30*30*30*30*30*30*30*30*30*30*30 30 30 30 30 . .
(-E   ,-    ) BA : . 20 . 20 . 20 . 20 20*20*20*20*27*27*27*27*27*27*27*27*27*27*27* . . . . . . .
(-N   ,-    ) BB : . 23 . 23 . 23 . 23 23*23*23*23* . . . . . . . . . . . 30 30 30 30 30 . .
(-E   ,-E   ) BE : . 20 . 20 . 20 . 20 20*20*20*20*27*27*27*27*27*27*27*27*27*27*27* . . . . . . .
(-E   ,-E   ) BG : . 20 . 20 . 20 . 20 20*20*20*20*27*27*27*27*27*27*27*27*27*27*27* . . . . . . .
(-E   ,-    ) BH : . 20 . 20 . 20 . 20 20*20*20*20*27*27*27*27*27*27*27*27*27*27*27* . . . . . . .
(-S   ,-    ) BN : . 20 . 20 . 20 . 20 20*20*20*20* . . . . . . . . . . . 30 30 30 30 30 . .
--More-- or (q)uit
(-A   ,-A   ) BO : . 23 . 23 . 23 . 23 23*23*23*23*23*23*23*23*23* . . . 23*23*23*30 30 30 30 30 . .
(-T   ,-AN ) BR : . . . . . . . . . 17*17*17*27*27*27*27*27*27*27*27*27*27*27*30 30 30 30 30 . .
(-I   ,-    ) BY : . 20 . 20 . 20 . 20 20*20*20*20* . . . . . . . . . . . . . . . . . .
(-A   ,-ABN ) CA : . 23 . 23 . 23 . 23 23*23*23*23*23*23*23*23*23* . . . 23*23*23*30 30 30 30 30 . .
(-A   ,-ABN ) CA2: . 23 . 23 . 23 . 23 23*23*23*23*23*23*23*23*23* . . . 23*23*23*30 30 30 30 30 . .
(-E   ,-E   ) CH : . 20 . 20 . 20 . 20 20*20*20*20*27*27*27*27*27*27*27*27*27*27*27* . . . . . . .
(-SA ,-A   ) CL : . 20 . 20 . 20 . 20 20*20*20*20*27*27*27*27*27*27*27*27*27*27*27*30 30 30 30 30 . .
(-    ,-    ) CM : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(-C   ,-C   ) CN : . . . . . . . . . . . . . . . . . . . . . . . 23 23 23 23 23 . .
So from that you can confirm that for 802.11bg you can use E and C regulatory domains.

Similar Messages

GetDesktopURL() problem with multiple DNS domains

Hello,
I use PS6.1 on a server with more domain names. If I login to one domain many portal links are directed to other domain.
I suppose that there is something wrong in function/tag getDesktopURL(). The domains are swaped sometimes after server restart. (I clear all cookies between tests).
For examle:
Page URL:
www.d1.com/portal/dt
In channel JSP:
<dtpc:getDeskpc.geDesktopURL/> -> www.d2.com/portal/dt
pc.getDesktopURL(null) -> www.d2.com/portal/dt
pc.getDesktopURL(request) -> www.d2.com/portal/dt
but:
request.getServerName() -> www.d1.com
request.getHeader("host") -> www.d1.com
Thank you for any hint, M.C.

You should give Apple a call and ask to speak to the iPhone enterprise group. They should be able to help you get your network setup properly.

I got problem with my ip4s lcd..how much it cost to replace it

i got problem with my ip4s lcd..how much it cost to replace it

Sorry, but replacing the LCD screen is no option for the iPhone 4s. This can only be done with the iPhone models 6 and 5.
Apple will replace the whole unit if you are paying the service fee for the other models.
Screen repair service pricing
Repair and replacement costs depend on your iPhone model and your AppleCare product coverage. Apple will run a diagnostic test to determine whether your iPhone has experienced additional damage. If it has, or if it needs other repairs, you may need to pay an out-of-warranty service fee. Accidental damage isn't covered under the Apple One Year Limited Warranty.
Model
Screen repair cost
iPhone 6
$109
iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5
$129
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing. Pricing and terms vary for service through an Apple Authorized Service Provider.
Out-of-warranty repair service
If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
Read Apple’s Repair Terms and Conditions
Model
Out-of-warranty service fee
Battery service*
iPhone 6 Plus
$329
$79
*available only if battery
fails Apple’s diagnostic test
iPhone 6
$299
iPhone 5s, iPhone 5c, iPhone 5
$269
iPhone 4s
$199
iPhone 4, iPhone 3GS, iPhone 3G,
Original iPhone
$149
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
Out-of-warranty pricing varies for Apple accessories such as adapters and Apple iPhone cases. Contact your carrier, Apple, or an Apple Authorized Service Provider for more information.
copied from Service Answer Center - iPhone

TS3274 its almost 10 months,i purchased ipad2 32 3g wifi.itinially i got problem with applications shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs freq

its almost 10 months,i purchased ipad2 32 3G wifi.itinially i got problem with applications and safari shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs frequently.plz advise.

If you have followed the standard Apple troubleshooting processes (see user guide )
probably a trip to the local Apple Store Genius bar is called for before warranty runs out
Assuming the iPad has been released in your Country if not you may have to take it to a
neighbouring Country where it is available
This page will tell you ,via the drop down menu Countries that can support iPad
http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=ipa d

Problem with multiple Toplink/JPA apps in same server

Anyone have experence of running serveral Toplink/ EJB-3 Web apps in the same server (OC4J, alas)?
We seem to get a problem with the second app failing to initialise toplink, with an entity not found message. Each app runs OK on it's own.

Yes, they access the same datasource and most of the tables overlap.
We're thinking it might help to have common entity classes and put them in a shared library, but I don't know if this is relevant (setting up shared libraries complicates testing and tends to snowball, I reckon we need about 15 jars all told).
I''ve had some funnies on OC4J before which I think may be to do with it's use of ClassLoaders, for example I initially put persistence.xml in the libary jar with the data model, but for some reason I get the entity not found error that way. It only seems to work if it's in the classes folder.
For the moment we're getting arround the problem with multiple OC4J instances in the server.

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

1. Download the iOS 5.0.1: http://www.tobias-hartmann.net/2011/11/download-ios-5-0-1-veroffentlicht-direkte -downloadlinks/
2. open itunes,Click in iTunes while holding down the Shift key (on Windows) or Alt key (Mac) to restore and firmware

I installed Mavericks yesterday and have now got problems with QuarkXpress 9. Every time I click on an image and try to move it the application crashes. Anyone had similar problems or got any suggestions?

I installed Mavericks yesterday and have now got problems with QuarkXpress 9. Every time I click on an image and try to move it the application crashes. Anyone had similar problems or got any suggestions?

Hi Guys
Updated my 2 imacs to Maverick yesterday. Schoolboy error on my part not checking if there were problems with any programmes before I did.
Quark is now a nightmare with no short term answer on the way. As a Quark user for over 20 years this is just another reason to hold your hands up and say OK Indesign you win I will have to learn how to use you and Quark will be a distant memory.
I am told there will probably be no solution to getting quak 9 running on Maverick and that you will need to update to 10 in about 2-3 weeks to get back to normal. Having spent a few bob on 2 versions of 9.5 only in Feb this year i didn't really want to upgrade yet.
So its cough up to carry on using Quark or learn Indesign.
I have lost faith in Quark as they are quick to send me e-mails asking me to upgrade to this and that version, why didn't they send one out saying do not upgrade to Maverick. Perhaps they know there loyal follwing will uograde to 10 and will generate a nice little bonus before Xmas.
Lots to do today and will now take 10 times longer to do it. Is this 2013 or 1974!!!!!
If anyone hears of a solution please post ASAP

After upgraded ios6 i got problem with whatapp. "last seen" function is not working

HI eveyone
after upgraded ios6 i got problem with whatapp. "last seen" function is not working .. it's doest show last seen who enter the chat . is anyone have the same problem .. i even restore and reinstall to my ph but it's not work .. if someone know how to fix it, plz tell me how to do .. thanks

Also, when I check this post several times a day, I always see warning 'Connection is untrust'. If I close browser and reopen immediately everything is ok.

I bought i pad 3 in canada 4 months ago but i think it's got problem with battery .i live in germany i don't know where to send it

i bought i pad 3 in canada 4 months ago but i think it's got problem with battery .i live in germany i don't know where to send it

Not quite what I heard when I went into the Apple Store in Hong Kong yesterday.
I have just bought an iPad in Hong Kong but will eventually be travelling back to the UK.
Louis in the Apple Store told me that iPads without cellular have international warranty but those with cellular do not (as there are slightly different models for different carriers).
But he was pretty cagey and essentially couldn't give a clear, straightforward answer. Which most Apple employees can't.
It is now a grey area, at the discrection of each local Apple Store & is subject, it seems, to you paying the import duty as a possible get out clause.
Look carefully but do tell us if you got this iPad reapired. Thanks.

I got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

i got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

Did you fix the problem? I have the same problem and it has been pain in the neck.

I have got problem with my pc-cam 950 slim

I have got problem with my pc-cam 950 slim. When I press the power button, the busy light goes on for seconds then it is shut down again so the camera doesn't work. Please help me with this problem. I tried to connect it to my PC put it didn't work either.
Thank you for taking the time to help me.

Originally Posted by Colin-CL
Hi,
Have you checked that you have put in brand new 2 x AAA batteries?
Connecting it to your PC will allow you to use it as a mass storage device after installing the relevant operating system (Microsoft
hi,
Yes, I put two new batteries
When connected to the computer nothing happens
What can be done to reset it?
By replaced capacitor problem can be solved?

Hi all, I got problem with my Safari!?

Hi all, I got problem with my Safari, same with Google Chrome, when trying to block pops-up. It's already ticked on BLOCK but everytime i click on new link, an annoyed pop-up appeared (game online, Mackeeper ...), any advice?

There is no need to download anything to solve this problem.
You may have installed the "Downlite" or "VSearch" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Malware is always changing to get around the defenses against it. In addition to, or instead of, the files listed in the support article, you may need to remove the following items:
/Library/Application Support/dot
/Library/LaunchAgents/com.dot.agent.plist
/Library/LaunchDaemons/com.dot.daemon.plist
/Library/LaunchDaemons/com.dot.helper.plist
/System/Library/Frameworks/v.framework
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This malware is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked.

Hi.. i've got problem with my iPhone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold power and home button even reset the network setting but ended with i am not able even to turn the wifi on. does any body can help me out???

hi..
i've got problem with my iphone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold the power and home button even reset the network setting but ended with i am not even can turn the wifi on. does any body can helpme?

See this: http://support.apple.com/kb/TS1559
If you carefully follow all of the instructions in this tip and none of them restore WiFi then your radio chip has failed and you need to get the phone replaced by Apple.

Problem with multiple versions of documents being published with 001, 002, etc.

I am using Contribute CS3. I am having a problem with multiple versions of documents being published on the sever with 001, 002, etc in the name. So that I end up with 2 or 3 versions of a document on the server. Does anyone know why / how Contribute is doing this? Thanks for any help you can give.

Your Web site administrator will need to update your key to allow you to delete files you are able to edit.

Problems with multiple idocs in one file ( Inbound file )

HI,
Thanks in Advance for your suggestions.. Highly appreciated.
We have problems with multiple IDocs in one file.
We are using XIB ( Amtrix ) as Middleware to receive the files.
Curretenly When the file contains one IDoc then there is no problem. IDoc is created and everything is ok.
If file contains two IDocs ( for example two messages ORDERS and DELVERY ) then it is creating two IDocs but both IDocs contains ORDERS plus DELIVERY segements information. That is the problem. Some how SAP unable to differentiate the IDocs in the file.. But it knows that how many idocs are there in the file..because it is creating exact number of idocs.
We are using TRFC port ... Do I need to change it to File port..
When we have more than one idoc do we need set any parameter in the file ...

Thanks for the swift response. Always ideas are useful.
As of now , Middleware cannot split the file.
Thing is SAP is creating two Idocs with different message types. Problem is First IDoc contains ORDERS message type but also DELIVERY segments as well. Second IDoc with DELIVERY message tyoe but ORDERS segments as well... This is the problem... I think we are missing some field activation in file for EDIDC record.
As far as I know file port supports the number of IDocs in one file.. Hope TRFC port also supports that

Is an AP got problem with multiple regulatory domain?

Similar Messages

Maybe you are looking for