Is an assigned value to an variable in the domain of the data element

Hi
how can I check if the value, which I want to assign to an variable is in the domain of the data element of that variable.
Example:
I defined a data element myDataElement. The Elementary Type of myDataElement is the Domain myDomain.
myDomain has the Format: Char with Length 1 and the fixed values 'A' and 'B'.
The following code works, but IMHO should not:
DATA testVar TYPE myDomain.
testVar = 'Foo'.
The value of testVar is now: 'F' .
As 'F' is not in the fixed values, this is a behaviour which I don't want. How can I prevent this from not happening (without using a bunch of IFs)?
In such a case, it were nice if an exception were raised.
Regards
Gilles

Thanks Gungor.
I tried it with DDUT_DOMVALUES_GET. Works so far. I think I will write some FMs on my own, like this one:
FUNCTION z_valueisindomain.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(IV_DOMAINNAME) TYPE DDOBJNAME
*"     REFERENCE(IV_EVALUATING_VALUE) TYPE ANY
*" EXPORTING
*"     REFERENCE(EV_DESTINATION) TYPE ANY
*" EXCEPTIONS
*"      ILLEGAL_INPUT
*"      NOT_IN_DOMAIN
DATA domainvalues TYPE TABLE OF dd07v.
CALL FUNCTION 'DDUT_DOMVALUES_GET'
    EXPORTING
      name          = iv_domainname
    TABLES
      dd07v_tab     = domainvalues
    EXCEPTIONS
      illegal_input = 1
      OTHERS        = 2.
IF sy-subrc <> 0.
    RAISE illegal_input.
ENDIF.
DATA oneline TYPE dd07v.
LOOP AT domainvalues INTO oneline.
    IF oneline-domvalue_l EQ iv_evaluating_value.
      ev_destination = iv_evaluating_value.
      EXIT.
    ENDIF.
ENDLOOP.
IF ev_destination IS INITIAL.
    RAISE not_in_domain.
ENDIF.
ENDFUNCTION.
I'm pretty new to ABAP, so this FM might not be very elegant.
Regards
Gilles

Similar Messages

Can we assign value to a variable in PL/SQL Loop

Hi
Can we assign value to a variable in PL/SQL Loops?
DECLARE
V_Num NUMBER;
BEGIN
LOOP
V_Num := 10;
DBMS_OUTPUT.put_line(V_num);
V_Num := V_Num - 1;
EXIT WHEN V_Num = 0;
END LOOP;
END;
In the above program, Can we assign V_num with a value 10????????
Thanks & Regards,
Hari Babu
Edited by: 1004977 on Jun 5, 2013 2:40 AM

Hi,
1004977 wrote:
Hi
Can we assign value to a variable in PL/SQL Loops?
DECLARE
V_Num NUMBER;
BEGIN
LOOP
V_Num := 10;
DBMS_OUTPUT.put_line(V_num);
V_Num := V_Num - 1;
EXIT WHEN V_Num = 0;
END LOOP;
END;
In the above program, Can we assign V_num with a value 10????????Yes; the example you posted does that.
When the loop starts, the value 10 is assigned to v_num. You should see that value displayed by the put_line statement.
After that, v_num is set to 10 - 1 = 9.
Next, the EXIT condition is evaluated. At this point, v_num is 9, not 0, so the loop runs again. V_num is set to 10 again, and the loop continues forever (or, in some versions, until the dbms_output buffer is filled and an error occurs.)

Assigning value to a variable.

i have one doubt.
we can assign value to a variable either in declaration section or in exectuion section.
so please explain when and wherer should we assign value to a variable.
thank you very much.

I think the best way to look at it is...
If you don't want your variable(s) to have default values that are NULL, assign a value in the declaration section, otherwise assign it where you feel like.
If you take an example of:
declare
v_sum number := 0; -- default variable to 0
cursor cur_test is
begin
for i in cur_test
loop
    v_sum := 0; -- set variable to 0 before the loop
    loop
      exit when .. some condition ..
      v_sum := v_sum + ..
    end loop;
end loop;
end;
/.. we have a need to set the variable v_sum to 0 before each iteration of the internal loop, so there's little point in having it defaulted to 0 in the declaration section, hence I wouldn't typically default it there and would typically have the code as..
declare
v_sum number; -- no point in defaulting it
cursor cur_test is
begin
for i in cur_test
loop
    v_sum := 0; -- set variable to 0 before the loop
    loop
      exit when .. some condition ..
      v_sum := v_sum + ..
    end loop;
end loop;
end;
/It all depends on what you're doing and what seems the most logical or preferred option.
Defaulting values in the declaration section can let you see clearly what the starting values are for things, but only if you really need to do it.

Assigning value to a variable in Script Component.

I'm pretty new to SSIS development and need to figure out a problem with assigning a value to a user defined variable. I created a pretty simple package. It reads a flat file, extracts date from a header record and subsequently uses derived column component
to reformat data to the desired output format. One of the columns (FileRunDate,
string, length 8) in the derived component is defined as a string and in the expression I'm assigning it to a variable I set earlier in the script component -
@[User::vRunTimeDate]. When the process runs, the output file gets generated, however FileRunDate reflects
originally set varible's value. It seems that the variable assignment in the script task does not work, even though in the debug mode, I do see how the value is being set. The variable has an attribute of ReadWrite. Is it due to the fact that the value is
being set in the same workflow?
Any feedback is greatly appriciated.

Unfortunately I'm unable to add a screenshot of the process, for some reason I get an error message when I try to do that. In a nutshell the entire workflow consist of flat file source component, following by a script component (this is where I read and
assign the variable)
public override void PostExecute()
IDTSVariables100 vars;
base.PostExecute();
// Set run date
if (strRunDate != null)
VariableDispenser variableDispenser = (VariableDispenser)this.VariableDispenser;
variableDispenser.LockForWrite("User::vRunTimeDate");
variableDispenser.GetVariables(out vars);
// Set the variable
vars["User::vRunTimeDate"].Value = strRunDate;
//Unlock the variable
vars.Unlock();
//Variables.vRunTimeDate = strRunDate;
then goes conditional split ( filtering out unwanted records), which is connected to a derived column component (this is where one of the columns get assigned a variable's value), one more script component (this where I identify
specific data element and do a replace command) and finally flat file destination.
BTW, the article in the provided URL clearly states that variable won't reflect assigned value till the entire workflow has finished. If that's the case, then I think I know my
answer. Is there is such a thing as putting execution of different steps in a different step, so anything executed subsequently will see that value?

Assign value to ODI variable from Jython

Hello Experts,
I have a procedure where I'm using Jython code. I want to assign a value to an ODI project variable from a Jython function:
Example:
#COUNTER = len(v_jythonList) ---> being #COUNTER the ODI project variable and len() the jython function
Now, i noticed that using ODI variables adds # sign which is use for comments in Jython code. Is there a way to assign values to ODI variables from Jython script?
Please help!.
Thanks.
Pablo.

Hi,
Does this post help you :- How to assign value for a ODI variable from Jython Script
Doc id 424579.1 on metalink should help.
Cheers
John
http://john-goodwin.blogspot.com/

Cannot assign value to a Variable of Complex Type beyond index 1

Hello:
I have a variable defined as a complex type as followed. I tried to assign a value to each of the two elements but it only allows me to assign to the 'element#1.
This statement that tries to assign a value into element#2 will not work, if I assign with '[1]' for the first element it will work:
<copy> <---- THIS WORKS
<from expression="'John'"/>
<to variable="My_Variable"
part="My_Collection"
query="/ns9:My_Collection/ns9:Collection/ns9:Collection_Item[1]/ns9:pname"/>
</copy>
<copy> <---- THIS DOES NOT WORK
<from expression="'John'"/>
<to variable="My_Variable"
part="My_Collection"
query="/ns9:My_Collection/ns9:Collection/ns9:Collection_Item[2]/ns9:pname"/>
</copy>
Is there something wrong with my definition below that allows only element#1 to be refererenced but not element#2???? Am I missing some kind of initialization that is needed to initialize both elements????
Here are my message and Complex Type definitions:
<variable name="My_Variable" messageType="ns8:args_out_msg"/>
<message name="args_out_msg">
<part name="My_Collection" element="db:My_Collection"/>
</message>
<element name="My_Collection">
<complexType>
<sequence>
<element name="Collection" type="db:Collection_Type" db:index="2" db:type="Array" minOccurs="0" nillable="true"/>
<element name="Ret" type="string" db:index="3" db:type="VARCHAR2" minOccurs="0" nillable="true"/>
</sequence>
</complexType>
</element>
<complexType name="Collection_Type">
<sequence>
<element name="Collection_Item" type="db:Collection_Type_Struct" db:type="Struct" minOccurs="0" maxOccurs="unbounded" nillable="true"/>
</sequence>
</complexType>
<complexType name="Collection_Type_Struct">
<sequence>
<element name="pname" db:type="VARCHAR2" minOccurs="0" nillable="true">
<simpleType>
<restriction base="string">
<maxLength value="25"/>
</restriction>
</simpleType>
</element>
</sequence>
</complexType>
The error msg it gives me is as followed:
[2010/09/04 00:47:59] Error in <assign> expression: <to> value is empty at line "254". The XPath expression : "" returns zero node, when applied to document shown below:less
oracle.xml.parser.v2.XMLElement@1fa7874
[2010/09/04 00:47:59] "{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown.less
-<selectionFailure xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/">
-<part name="summary">
<summary>
XPath query string returns zero node.
According to BPEL4WS spec 1.1 section 14.3, The assign activity <to> part query should not return zero node.
Please check the BPEL source at line number "254" and verify the <to> part xpath query.
</summary>
</part>
</selectionFailure>
Thanks
Newbie

Hello:
Base on the suggestion to use 'append' instead of 'copy', I tried to define a 'singleNode' which is of type 'Collection_Type_Struct' so I can append this individual 'struct' into my array (i.e. as the 2nd. element of my array "/ns9:My_Collection/ns9:Collection/ns9:Collection_Item"), but I am getting an error in defining this variable as:
<variable name="singleNode" element="Collection_Type_Struct"/> <--- error
Can someone tell me how should I define "singleNode" so I can put a value in it and then append this 'singleNode' into the array:
<variable name="singleNode" element=" how to define this????"/>
<assign>
<copy>
<frem expression="'Element2Value'"/>
<to variable="singleNode"
part="My_Collection"
query="/ns9:My_Collection/ns9:Collection/ns9:Collection_Item/ns9:pname"/>
</copy>
</assign>
<bpelx:assign>
<bpelx:append>
<from variable="singleNode" query="/ns9:My_Collection/ns9:Collection/ns9:Collection_Item"/>
<to variable="My_Variable"
"part="My_Collection"
query="/ns9:My_Collection/ns9:Collection"/>
</bpelx:append>
</bpelx:assign>
Again here is my definition in my .xsd file:
<element name="My_Collection">
<complexType>
<sequence>
<element name="Collection" type="db:Collection_Type" db:index="2" db:type="Array" minOccurs="0" nillable="true"/>
<element name="Ret" type="string" db:index="3" db:type="VARCHAR2" minOccurs="0" nillable="true"/>
</sequence>
</complexType>
</element>
<complexType name="Collection_Type">
<sequence>
<element name="Collection_Item" type="db:Collection_Type_Struct" db:type="Struct" minOccurs="0" maxOccurs="unbounded" nillable="true"/>
</sequence>
</complexType>
<complexType name="Collection_Type_Struct">
<sequence>
<element name="pname" db:type="VARCHAR2" minOccurs="0" nillable="true">
<simpleType>
<restriction base="string">
<maxLength value="25"/>
</restriction>
</simpleType>
</element>
</sequence>
</complexType>
Thanks for any help!!!!

Dynamically assign value to bind variable in a view object before pageload

I found that it is extreamely hard to find an example to assign the bind variable in View object at runtime using a data attribute defined in Human task activity. Most of the available samples use a Literal value to do the assignment. In my case, I want to dynamically display the content by assigning the data attribute in Human task to the bind variable in view object before a pageload.
I do not want to bind the view object to some command component to click a button or link in order to make it work (Unnecessary components in my page).
The issue is how to access the data attribute in Human task in the java code of client interface in AppModule? or is there a way that I can access the data attribute in Groovy script expression of the bind variable? or if I can access the process data object defined in my BPM process to do the assignment at runtime?
Really need help on the issue, and I cannot believe that it is so hard to accomplish.
Thank you very much,

chk this
Passing default value to bind variable on page load.
http://adfcodebits.blogspot.com/2010/03/bit-2-setting-bind-variable-value.html

Error in assigning value to local variable

i am writing a stored procedure in which i have pass parameter if parameter value is zero then i assign a previously declared variable null else that value
syntax is this
create or replace
PROCEDURE usp_Add_Update_Insurance
p_CityID IN NUMBER DEFAULT NULL
as
v_CityID number(10,0);
begin
IF p_CityID = 0 THEN
BEGIN
v_CityID := NULL;-----giving error in this line
else
v_CityID:=p_CityID;
END;
END IF;
end
begin
///some query
end
please help someone

I think there is no added value by putting those Begin/End.
The simplest solution is just remove them
Create Or Replace
Procedure Usp_Add_Update_Insurance (
     P_Cityid In Number Default Null
) As
     V_Cityid Number(10,0);
Begin
     If P_Cityid = 0 Then
          V_Cityid := Null;
     Else
          V_Cityid:=P_Cityid;
     End If;
     -- do something with V_Cityid
End; The only reason for having Begin/End is if you want to catch some exceptions or perform some strange local variable declarations. But it does not seems to be case here.
MJ

Urgent - Assign Value To Bounded Variables

In My Application Module I Create View With Bound Variables in The Where Condition, I Create Manual JSP To List The Data From The View As Reports Done.
Pls. Tell Me How & Where I Can Assign Value To The Bounded Values At Run Time
Regards
ABG

If your datasource tag introduces a scripteable vairiable named 'ds' you can use a scriptlet as follows:
<%
ds.getRowSet().setWhereClauseParam(int index, Object value);
%>
the index is the parameter index, the value is the value of tha parameter. Please look at the BC4J runtime Javadoc for more information.

How do I access a value of a variable in SSIS and control the flow accordingly based on its value?

So I have a Foreach Loop Container that Enumerates a read Excel spreadsheet and this Foreach Loop get its User::SheetName. Can I change my flow accordingly based on the value of the User Variable User:SheetName that is dynamically valued by the Foreach Loop
Container? So if the User::SheetName is "Enrolled", I want to load that worksheet to a certain SQL Server Table using an Excel Source and OLE DB Destination and if the User::SheetName is "Engaged", I want to load its worksheet contents
to a different SQL Server Staging Table. What Task can I use to determine the value of User::SheetName or am I going to have to write a C# script to do this?
Any help and/or suggestions are GREATLY appreciated.
Thanks!

Hi ITBobbyP,
According to your description, you want to read data from excel by using the Foreach Loop container with the appropriate enumerator. If that is the case, please refer to the following steps:
Inside the ADO NET enumerator, add a data flow task.
Inside the data flow task, add an Excel source.
Open the Excel source, and point to the Excel data source set up in the file enumerator.
Select one of the sheets that shows in the drop down.
Close the Excel source.
Select the Excel source.
In the properties window, copy the name of the sheet you selected. It's in the 'OpenRowset' property.
Set this as the initial string in your sheet name variable created to gather the sheet name from the ADO NET enumerator.
Select the Excel source.
In the properties window, change the 'AccessMode' to OpenRowset from Variable. This will change the property 'OpenRowset' to 'OpenRowsetVariable'.
Change the 'OpenRowsetVariable' to the variable created to hold the sheet name via the dropdown.
Open the Excel source. You should see your variable as the sheet name.
Click the 'Columns' tab to verify you can connect and mess with columns.
For detail information, please refer to the following document:
https://technet.microsoft.com/en-us/library/ms345182.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

How to get the value of a variable in group footer in the report footer also

I have a placed a formula as below at the group footer and the report footer. The data is grouped on the basis of duedays which is again formula and the value in that is appearing correctly.
Whilereadingrecords;
Global Numbervar CNTONE;
Numbervar P := P+1;
IF P = 1 AND {@DUEDAYS} = 0
THEN CNTONE := {spSUPPLIERSOA;1.INVOICEBAL}
ELSE IF P>1 AND {@DUEDAYS} = 0
THEN CNTONE := CNTONE + {spSUPPLIERSOA;1.INVOICEBAL}
At the group footer I get the value correctly for CNTONE but when I place the formula in Report footer I get the value for CNTONE as 0.
Please do let me know how I could get the same value in the report footer also.
Regards
Sreejith J

Hi Abhilash;
When I give the statement whileprintingrecords then my above formula sums up only the first record and the last record of the group and when I give whilereadingrecords it adds up all the data in the group correctly.
The formula that you mentioned for the report footer had worked out and it is showing my result correctly.
I did not put up the reset formula on the group footer because as the group changes I had used another variable in another formula for example for the second group I used
Whilereadingrecords;
Global Numbervar CNTTWO;
Numbervar Q := Q+1;
IF Q = 1 AND {@DUEDAYS} = 30
THEN CNTTWO := {spSUPPLIERSOA;1.INVOICEBAL}
ELSE IF Q>1 AND {@DUEDAYS} = 30
THEN CNTTWO := CNTTWO + {spSUPPLIERSOA;1.INVOICEBAL}
I have set up total 5 such formulas as the number of groups that will be formed is 5. I have put up these formulas on the group footer and suppressed it as I dont want to get it displayed.
The as you suggested the solution for Report Footer I did that and getting the result correctly.
I dont know I may be following a longer procedure
Take Care
Sreejith J

XSL-How to get value of a variable from inside loop-- to the outside loop?

Pls help
hi im currently working on this xsl file..
This works on generating a txt file,my problem right now is
' how can i get the value of a variable generated from the inside forloop,
i have to get the total,sum value of this variables after performing the loop
***this is the for loop
<xsl:for-each select="OutboundPayment">
<xsl:variable name='id' select='generate-id(OutboundPayment)'/>
<xsl:sort select="PaymentNumber/CheckNumber" data-type="text" />
<xsl:variable name='PValue' select='format-number(100*PaymentAmount/Value,"0000000000000")'/>
<xsl:value-of select='$id'/>
<xsl:text>D</xsl:text>
<xsl:value-of select='$DDate'/>
<xsl:value-of select='$Batch'/>
<xsl:text>3</xsl:text>
<xsl:value-of select='format-number(PaymentNumber/PaymentReferenceNumber,"0000000000")'/>
<xsl:value-of select='format-number(PayeeBankAccount/BankAccountNumber,"0000000000")'/>
<xsl:value-of select='substring(Payee/Name,1,20)'/>
<xsl:value-of select='$PValue'/>
<xsl:variable name='Addend' select='concat($DDate,substring($DAcct,5,5),$Batch)'/>
<xsl:variable name="LHash">
<xsl:call-template name="GetHash">
<xsl:with-param name="A1" select="$PValue" />
<xsl:with-param name="A2" select="$Addend" />
</xsl:call-template>
</xsl:variable>
<xsl:value-of select="concat('[',$LHash,']')" />

<xsl:call-template name='NewLine'/>
</xsl:for-each>


<xsl:template name="GetHash">
<xsl:param name='A1'/>
<xsl:param name='A2'/>
<xsl:variable name='TwoSum' select='format-number($A1+$A2,"000000000000000")'/>
<xsl:variable name='Weight' select='317191314191112'/>
<xsl:call-template name="WDigit">
<xsl:with-param name="Cnt" select="15"/>
<xsl:with-param name="Sum" select="$TwoSum"/>
<xsl:with-param name="Wgt" select="$Weight"/>
<xsl:with-param name="Tot" select="0"/>
</xsl:call-template>
</xsl:template>
<xsl:template name='WDigit'>
<xsl:param name='Cnt'/>
<xsl:param name='Sum'/>
<xsl:param name='Wgt'/>
<xsl:param name='Tot'/>
<xsl:choose>
<xsl:when test="$Cnt > 0">
<xsl:variable name='Multip' select='substring($Wgt,$Cnt,1)'/>
<xsl:variable name='Factor' select='substring($Sum,$Cnt,1)'/>
<xsl:variable name='Prduct' select='$Multip$Factor'/>



<xsl:call-template name="WDigit">
<xsl:with-param name="Cnt" select="$Cnt - 1"/>
<xsl:with-param name="Sum" select="$Sum"/>
<xsl:with-param name="Wgt" select="$Wgt"/>
<xsl:with-param name="Tot" select="$Tot+$Prduct"/>
</xsl:call-template>
</xsl:when>
<xsl:otherwise>
<xsl:variable name="Rem" select="$Tot mod 11"/>
<xsl:variable name="Chk" select="11 - $Rem"/>
<xsl:value-of select="format-number(concat($Tot,$Chk),'00000')"/>
</xsl:otherwise>
</xsl:choose>
<xsl:template name='GetTotal'>
</xsl:template>
Thanks in advance for those who are willing to help.
-Leighya

It would have helped if you had posted your code as CODE but as it is, I could hardly read it. My guess about what you are asking is, if you want a template to return a value, just write that value to the result stream inside the template.
If that wasn't what you were asking, then please post your code in a readable format.

Assigning variable value to another variable

I want to assign value from one variable with type DATETIME to another variable which has type STRING.
E.G: I need to convert this variable P_CreatedDate of type DATETIME to STRING variable CreatedDate.
Can someone help me in C# script. Im using SSIS script task.
Thanks in advance.
ZK

I have a requirement where I need to convert following datetime variable value into the string vaiable format.
Here is the example:
7/23/2014 11:24 PM
I need above datetime to be converted into following string format
2014-01-01 03:15:01.470
yyyyMMdd HHmmssFFF
Thanks in advance.
ZK

Assigning Value to Variable in Sapscript

Hi,
To initialized value of the variable when I tried to assign 0 to variable (like in the following statement) it comes up with error 'Command Expected'.
&RF140-ZALBT&= '0'.
Please let me know where and what I am doing wrong in assigning value to a variable?
Regards,
Shabbar

Hi,
Still its not working. The statement I am writing is
/: &NET& = &RF140-WRSHB& - &RF140-MSATZ&
but the system gives error on that.
NET is the local variable declared with Define statement and both the others are defined in print program.
Even I tried
/: &RF140-ZALBT& = &RF140-WRSHB& - &RF140-MSATZ&
but still the same error.
Any comments?
Regards,
Shabbar

Assigning javascript varibel value to java variable

Hi all
I want to find screen resolution in one jsp page.That can be done in javascript.
(though 'screen.width and screen.height')
But is there any way to assign that value to java variable.
Any body has the idea?
Help me.

No, why ? becuase jsp is SERVER side
There are workarounds, You can store your javascript values in hidden fields and submit your page with them to your JSP and then use them like that

Is an assigned value to an variable in the domain of the data element

Similar Messages

Maybe you are looking for