Is an hp F4140, CB580A printer usable with Windows 8.1

Using a Dell Inspiron 3646 with Windows 8.1, should I be able to connect directly to a F4140,  CB580A and start printing?
If not, what download/driver would I install for successful printing?

I mistakenly called the printer "CB580A" and it should have been "CB587A".
I followed the link you sent and activated it which resulted in downloading an installation file to my computer.  I went thru the installation process to "finish".
I tried printing text in Notepad and the text was printed successfully.
I tried printing a web page and that did not print.  The file would show up when I asked to see "what is printing".  It showed up as a file waiting to be printed.  I heard the printer make its noises in preparation to print.  Nothing more happened.
I next tried printing a "snip" and that did not print.  The file would show up when I asked to see "what is printing" and it showed up a file waiting to be printed.  I heard the printer make its noises in preparation to print.  Nothing more happened.
I was sure to "restart" the computer and cycle power on the printer.   
I await your next suggestion.  This can't be far away from success.
Thanks
Curtis

Similar Messages

  • Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

    Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

    HP Smart Web Printing has been replaced with HP Smart Printing.  It does support Windows 7 and IE 6 to IE9.  See this page for information.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?

    Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?
    Operating System:  Windows Version 8.1 PRO
    When I upgraded from Windows 7 to Windows 8.1, my HP Photosmart Premium all-in-one C309n-s
    stop working.  Is this printer not compatible with Windows 8.1 PRO?  Is there any update for this?

    Hey,
    HP Photosmart Premium all-in-one C309n/g printer is compatible for Windows 8.1
    Please uninstall your printer's old software then install new one for windows 8.1.
    HP Photosmart Premium All-in-One C309 Series Full Feature Software and Driver :
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109711-1&cc=us&dlc=en&lc=en...
    Kevin_US_CA
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the left side of my post to say thanks!***

  • Can the wireless printer work with window 7?

    can the wireless printer work with window 7?

    Will this wireless printer connect to the AirPort Express Base Station (AX) via a wireless or USB connection?

  • How to share 10.6 OSX Server print queue with Windows 7 successfully?

    I used Bonjour Print Services for a Windows 7 machine (http://support.apple.com/kb/dl999) to successfully connect to a Mac OX Server 10.6 print queue, and the following message is generated in the print log and CUPS log,
    "POST/printers/stormoncecar/ HTTP/ 1.1" 200 2205 Print-Job Successful-OK
    There are no errors, however, nothing comes out of the printer.  It works for all the Mac OS Client machines, but not for any of the Windows 7 machines.
    How to share print queue with Windows 7 successfully?

    I'm back on this problem.  I thought I would give more details as I still can't print. 
    Operating System: 10.6.8
    Driver for Canon LBP6750 UFRII prints from Mac and prints from Windows 7.  However, printing from Windows 7 as you share the printer from your Mac does not print out anything and has no errors.
    JOB INFO
    Completed smbprn.00000004 Microsoft Word - Document 1 3:43PM Today 3:43PM Name
    CUPS > access_log
    localhost - - [01/Feb/2012:15:43:33 +0900] "POST /printers/FLOOD_6750_UFR HTTP/1.1" 401 2003 Print-Job successful-ok
    localhost - lino [01/Feb/2012:15:43:33 +0900] "POST /printers/FLOOD_6750_UFR HTTP/1.1" 200 2003 Print-Job successful-ok
    CONSOLE MESSAGES
    2/1/12 3:47:45 PM    com.apple.launchd.peruser.501[
    200]    (jp.co.canon.UFR2.BackGrounder[664]) posix_spawn("/Library/Printers/Canon/UFR2/Utilities/UFR II BackGrounder.app/Contents/MacOS/UFR II BackGrounder", ...): No such file or directory

  • MF imageclass 4350 (black &white laser printer) compatible with WINDOWS 8.1?

    MF imageclass 4350 (black &white laser printer) compatible with WINDOWS 8.1?   WINDOWS 8.1 recognizes I have printer attached, but it says flatly "No driver!"  I have run all the drivers from CANON and then attached the printer.   But, still it doesn't work!   Nothing from CANON sez" SETUP...........

    Hi mybrojer.
    I will be glad to assist you.
    The file that you download from the Canon website is .ZIP file.  When you select [RUN], it unpacks the setup folder.  Please disconnect the printer from the computer and follow the instructions below to install the printer:
    Open your [Downloads] folder.
    You will see two icons with the name: MF4350_MFDrivers_W64_us_EN.exe. Double-click on the yellow folder icon with this name.
    In the folder you will see two listings for [Setup].  Double-click on the [Setup] that has the type as [Application].
    The "MF Drivers Setup Wizard" will open.  Proceed through the steps and restart the computer.
    After restarting the computer, connect the USB cable and allow the installation to complete.
    Print a document.
    I hope that this information is helpful to you.  Should the error persist, or your need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Photosmart Printing Issues with Windows 7 RC

    Good afternoon.  I've tried to search for this but was unable to find anything on our specific issue unfortunately.  I've got a Photosmart C4180 and it came with HP Photosmart Premium software.  While this is fine on XP, the disc is XP only. You cannot change compatibility mode of the file on the CD to XP.  I have not had the chance to try copying the CD to the HDD and changing it there (would that work?).
    As a result, I've been using Windows 7 RC and Photosmart software that you can download for Vista x64 with very little success using Vista compatibility mode (I've tried both SP1 & SP2).  It will install and run, but when attempting to print with it, it is ruining prints and thus costing us money.  I've got to go back to XP to print anything and that's of course less than preferable. 
    The problems: When printing borderless, it skews the photo (rotates it a degree or two) and produces white space in two corners with a crooked photograph.  When attempting to print with borders, it stops printing 2/3 of the way through the photo...I guess it thinks the bottom border is supposed to be HUGE.  So, unfortunately, compatibility mode is a non-starter and doesn't allow proper printing of photos. 
    If anyone has any suggestions on fixing those problems, I'll happily try them. Using the older version of Photosmart in WinXP does not have these issues.
    While speaking of Win7, does anyone know when HP plans on releasing software that will work properly for it?  The time is nigh.  RTM has already come and gone with retail to follow on October 22nd. Is there a beta that users can test or sign up for?  I'd be more than willing to be a guinea pig, just let me know what needs to be done.
    My wife is set in her ways and absolutely must use Photosmart to print photos.  It would be very sad if we had a brand new copy of Win7 (pre-ordered) sitting there, waiting on HP to release software that is usable with it.
    Thanks for any help you can provide!
    Message Edited by hokiealumnus on 08-18-2009 08:27 AM

    Good afternoon.  I've tried to search for this but was unable to find anything on our specific issue unfortunately.  I've got a Photosmart C4180 and it came with HP Photosmart Premium software.  While this is fine on XP, the disc is XP only. You cannot change compatibility mode of the file on the CD to XP.  I have not had the chance to try copying the CD to the HDD and changing it there (would that work?).
    As a result, I've been using Windows 7 RC and Photosmart software that you can download for Vista x64 with very little success using Vista compatibility mode (I've tried both SP1 & SP2).  It will install and run, but when attempting to print with it, it is ruining prints and thus costing us money.  I've got to go back to XP to print anything and that's of course less than preferable. 
    The problems: When printing borderless, it skews the photo (rotates it a degree or two) and produces white space in two corners with a crooked photograph.  When attempting to print with borders, it stops printing 2/3 of the way through the photo...I guess it thinks the bottom border is supposed to be HUGE.  So, unfortunately, compatibility mode is a non-starter and doesn't allow proper printing of photos. 
    If anyone has any suggestions on fixing those problems, I'll happily try them. Using the older version of Photosmart in WinXP does not have these issues.
    While speaking of Win7, does anyone know when HP plans on releasing software that will work properly for it?  The time is nigh.  RTM has already come and gone with retail to follow on October 22nd. Is there a beta that users can test or sign up for?  I'd be more than willing to be a guinea pig, just let me know what needs to be done.
    My wife is set in her ways and absolutely must use Photosmart to print photos.  It would be very sad if we had a brand new copy of Win7 (pre-ordered) sitting there, waiting on HP to release software that is usable with it.
    Thanks for any help you can provide!
    Message Edited by hokiealumnus on 08-18-2009 08:27 AM

  • Does hp 3056A printer work with windows 8

    does an hp 3056A all-in-one printer work with a windows 8 computer

    Hi,
    Yes, you can use driver from the following link:
       http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=5298...
    My suggestion: download the second utility and run it, it will find and install driver for your computer.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • CS5 printing issues with Windows 7

    I have recently upgraded to windows 7 64bit and CS5. My printer is a Xerox Phaser 8560. I cannot print any vector art from any creative suite program. The print preview is correct but when it prints, the image is small and on one side of the paper and a second blank page prints right after that. I did not have this problem with my previous XP and CS4. I have went to Xerox and downloaded the right printer driver for windows 7 64 bit and even upgraded my firmware. The only way I can print correctly is a bitmap. For instance, when I print from acrobat I always have to have "print as image" checked. It prints correct in photoshop too, It seems it will only print bitmaps from CS. Anything from Illlustrator, Indesign will not print correctly. Has anyone experienced anything like this? Please HELP! I cannot find any resolutions.
    Thanks

    I have recently upgraded to windows 7 64bit and CS5. My printer is a Xerox Phaser 8560. I cannot print any vector art from any creative suite program. The print preview is correct but when it prints, the image is small and on one side of the paper and a second blank page prints right after that. I did not have this problem with my previous XP and CS4. I have went to Xerox and downloaded the right printer driver for windows 7 64 bit and even upgraded my firmware. The only way I can print correctly is a bitmap. For instance, when I print from acrobat I always have to have "print as image" checked. It prints correct in photoshop too, It seems it will only print bitmaps from CS. Anything from Illlustrator, Indesign will not print correctly. Has anyone experienced anything like this? Please HELP! I cannot find any resolutions.
    Thanks

  • Wireless printer sharing with windows 7 and vista operating systems.

    hello can anyone help me?
    i have a new HP pc with windows 7 OS, and have an epson PX710W 3in1 printer.
    i want to connect a laptop with vista OS to share the printer (wireless set up).
    the pc will print documents ok via wireless link, but when i power up the laptop it appears to inhibit the printing function (document will not print).
    i have set up file/ print sharing but there is the problem. it appears to me that sharing is only possible between pc,s etc with windows 7 OS via the homegroup set up. Has  anyone encountered this problem at all, has anyone any ideas? or is it a configuration problem that i'm not aware of?

    I found that I had issues with getting all of these to work - individually.  I have an XPPro (32) pc trying to print to Win7Ultimate printer - printer is shared with all settings wide open, works great with another 7 or Vista machine, but same errors
    as above for XP.  I got it to work an old way, and then the "local port" way worked.  I don't really know why as yet, but I am investigating.
    My Solution -
    1. As stated in other posts, install the printer locally on the XP machine.  Make sure that it prints.
    2. Connect the printer to the 7 machine, print a test, then change the file and print sharing options to "yes".  I also installed the "Universal Driver" for my printer - HP1200 Laserjet.
    3. Make sure that the Network type that the 7 machine sees is "Work" or "Home", not "Public". -  I don't know if this really  did anything or not, but I did make the change - mine thought the network was "Public".
    4. Go back to the XP machine, if you get errors when you add the "Local Port" as suggested, then do this -
    Warning Old Dos Trick -
         -  Open a Command Prompt, then type (without quotes) "net use Lpt1 \\COMPUTERNAME\PRINTERSHARE " - where "computername" is the name of the computer and sharename is the shared name of the printer
    on that computer.
        - you SHOULD see "command completed successfully", if not check to make sure that you have rights on the 7 machine.  Now you should be able to print a test page to the printer. CAUTION - it took awhile for the changes to
    take, so you may have the hourglass looking at you for a few minutes. - Once you reboot this will not work as the connection is just for that session.
    To explain: this command is the dos version of what happens when you re-route output to a different destination - thus any traffic to LPT1 goes to \\computername\sharename.
    5. After this worked, I then could add the "local port", as detailed earlier and had no errors.
    Hope this helps someone else!

  • Printer compatibility with windows 8.1

    My bank's website allows me to view and print images of my cancelled checks. When I was running Windows 7 my LaserJet 1020 worked just fine. But with Windows 8.1 it would not print the images themselves--just two empty boxes and surrounding text. I then purchased a new HP LaserJet Pro P 1102w after being told it was compatible with Windows 8.1. I now have the exact same problem with the new printer. I do not have this problem when I attach my laptop running Windows 7 to the new printer. I prints out everything. I short, I don't believe my new printer is fully compatible with Windows 8.1. I have been unable to download HP's "full solution." How can I get this on a CD?
    This question was solved.
    View Solution.

    Hi Flyfish66,
    The issue most likely lies with the browser you are using with Windows 8. It is probably a different version from when you were using Windows 7.
    What browser are you using? AOL?
    Try using another browser to see if have the same results. (Google  Chrome, Firefox, Internet Explorer)
    Use another browser other then AOL, when downloading the drivers.
    If you are able to print with the different browser, please contact AOL support for further assistance with using that browser.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Printing wirelessly with Windows Vista

    Alright I just got our Vista laptop successfully connected to the TC wireless network.
    Now I'm trying to print wirelessly with the Vista laptop, but when I go into "add printer" in the Vista control panel, it's unable to detect the printer. The printer is on.
    My Macbook Pro is currently able to print wirelessly.
    Anybody know what I can try?

    I was able to add the printer on my Vista laptop with Bonjour on the disk that came with Time Capsule. Previously the laptop couldn't see the printer, but now it can wirelessly print.
    This manual was helpful (p. 61).
    http://manuals.info.apple.com/en/DesigningAirPort_Networks10.5-Windows.pdf

  • Is Photosmart A532 compact printer compatible with windows 8?

    I recently purchased a new computer that came with window 8 OS and I am unable to install my HP photosmart A532 compact printer. I have visited the HP Support site and downloaded the driver that matched my computer settings, but when I run the .exe file I get a pop-up message that says download the latest driver. When I click on it, it sends me back to the HP Support site driver page where I originally installed the driver -- an endless loop. I have downloaded other versions of the driver just to see if it would work and it doesn't. I have also downloaded the doctor software to help resolved the issue and it doesn't detect my printer (I have checked that all cables are connected). My only deduction is that even though HP says it has windows 8 drivers, it really doesn't.
    Any help would be greatly appreciated.

    Hello wolfgrimm
    Welcome to the forums!
    First off you do want to start off by uninstalling the any printer software that has been installed. Please check Program and Features, for anything listed for the printer, right click and uninstall.  After this with the USB cable still plugged in, you will need to remove the entries from Device Manager. I have included the steps below for you.
    Go to device manager.
    1. Open up the Universal serial bus controllers list
    2. Right click on USB printing support, and click Uninstall
    3. Right click on each USB Composite Device, and select Properties
    4. Click on the Details tab
    5. Change the Property to Hardware Ids
    6. Look for any composite device the has a VID_03
    7. For the ones that have a VID_03, right click on the composite device, and uninstall
    8. Unplug the USB Cable
    After this you will need to try install the software again. I have included the link 'HP Photosmart Full Feature Software and Drivers'. Please download and run the installation software. Only plug the USB cable in, when the installation software informs you to.
    Please let me know if you are able to successfully install the software, thank you.
    I worked on behalf of HP

  • Will an Hp 6700 printer work with Windows 8,

    I just bought an new h8-1477c computer running windows 8, my wife just purchased an HP-6700 printer will this priner run with windows 8

    Yes,
    Simply make sure to install the latest software available online and not the original CD:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109007-2&cc=us&dlc=en&lc=en...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Help with Photosmart Printer 7960 with Windows 8.1

    I had to buy a new computer (8.1 windows).  I was still using XP, when the computer crashed.  I have lost the software for my printer.  Does anyone know where I can find the software?  HP told me that my printer is not compatible with windows 8.1.  Has anyone been able to print with this printer and windoes 8.1?
    Thanks

    Hi,
    The last update was 4 years and 11 months ago:
       http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3053...
    Well, it's time to buy a new printer.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for