Is an iphone compatible with multiple services?

I have an iphone 4s and have sprint service right now but want to switch to virgin mobile to save money.
I understand that iphones are supposedly manufactured to cater to the provider it is sold with. However, i really really want to keep the phone that i have right now and just switch the service without buying one of virgin's phones or jailbreaking my phone.
Sprint said its possible, and I called apple and they said the only thing that would restrict me from doing that is if sprint had a lock on my device. BUT virgin says no its not possible.
Does anyone have experience or knowledge regarding this?

Sprint and Virgin Mobile in the US are both CDMA carriers. You can not use a Sprint phone on any other US carrier. You can not us a Virgin Mobile iPhone on any other US carrier.
If you want to use Virgin Mobile, you will have to puchase a phone intended to be used on their network.

Similar Messages

  • Is iphone compatible with tmobile service?

    i was wondering if the iphone is compatible with Tmobile phone service. Can I add it to a family plan?

    Not for the next 4 1/2 years I'm afraid (AT&T is the exclusive carrier for 5 years from launch).

  • Is iPhone compatible with GSM in the Meddle East

    Is iPhone compatible with GSM in the Meddle East

    While roaming from a US based At&t account. Almost certainly yes. However the iPhone is carrier locked to At&t and requires a US billing address so unless you have an approved international account, you are going to be roaming amd risk getting your service cancelled.
    Its far better to wait for the iPhone to be sold locally. It is and still will be a GSM phone when that happens.

  • Service Procurement with Multiple Service Line items

    Dear Experts,
    We have the following Business Scenario. Request your inputs in addressing this issue.
    Business scenario : Most of the Procurement for our client is of services. So, we need to configure services with multiple service line items. This Shopping cart to create PR in ECC. PR to PO conversion to take place in ECC. Now onwards client needs Supplier integration for confirmation of services and sending invoices by Vendor.
    Guidance required in the following
    1 In Shop functionality if we select services, PR is being created in ECC with only one Service Line item. Whereas if we go for Request functionality, then always it is routing to Bidding process (which is not required for client). Can we create SC with multiple service line items with out request functionality?? Or Can we root the Request functionality with out Bidding process??
    2 If we convert the PR to PO in ECC (Classic Scenario), can we go for SUS integration. In such case which is the best way of supplier integration. Can you please guide us on basic steps on installation (can we go for different client in the same server) and configuration.
    Request your inputs in this regard
    Thank you,
    Ravi

    Hello,
    We suffered the same problem in our company.  We have found a way to work with the SRM shopping cart multiple line rollup to ECC single line purchase order.
    If the multiple shopping cart line items contain the same location code and cost assignment they will rollup into one ECC purchase order.  The system seems to 'think' it is helping you by consolidating your information.
    In the Basic Data section of the shopping cart there is a Service line item field.  If you enter something in each in that field for each line it will keep it's own line in ECC.
    Your implementation may differ slightly from ours but I recommend playing with the location code, cost assignment and Basic Data service line fields until you can see a pattern.  Basically you need to find a method to make each line a separate entity so they don't rollup.
    Good luck,
    Corinne

  • Is Muse compatible with Email Service Providers. I found html code issues - PCs have viewing issues

    Is Muse compatible with Email Service Providers? A colleague said Muse has html code issues as PCs struggle to display the artwork correctly when emails are delivered.

    Is Muse compatible with Email Service Providers? A colleague said Muse has html code issues as PCs struggle to display the artwork correctly when emails are delivered.

  • Does Apple plan to make iTunes / iPad, iPhone compatible with 24 bit FLAC files?

    Does Apple plan to make iTunes / iPad, iPhone compatible with 24 bit FLAC files?

    I wouldn't count on FLAC being supported. 24 bit Apple Lossless (ALAC) is our best bet. I have been patiently waiting for 24/96 or greater support on ipods and especially AppleTV... Desktop iTunes is compatible with hi res files, but not FLAC, you have to convert them to Apple Lossless with Max (or some other converter)... I have several FLAC files from HDTracks, and converted them fairly quickly and easily with Max, so I could add them into iTunes. They play fine on my computer (with an external DAC), and stream fine to AppleTV, but ATV downsamples to 16/44 according to my Receiver. I wish it wouldn't do that....

  • Is my iPhone compatible with

    Is my iphone compatible with a handsfree car kits ? I have a pickup truck and would like to know if it's possible i've heard of cars with the kit integrated into the vehicle . My truck is old so I would like to know if anyone has already done this manually do I need to buy an iPod kit or is there somthing already on the market I could buy for this . All replies welcome.

    It should be; the best way to find out is just to try it. I have a Parrot CK3100 in my car (installed aftermarket, obviously) and it works just fine. It should work with most Bluetooth handsfree systems, as it's the only Bluetooth function that the phone supports at the moment.

  • Is the iPhone compatible with the Music Link I have in my 2006 Honda Accord

    I have a 2006 Honda Accord with Music Link so I can play my iPod through the speakers. Is the iPhone compatible with this?

    Welcome to the forums.
    It appears that update 1.1.2 (or perhaps even 1.1.1) "fixed" some issues with the iPhone not working with certain iPod car stereo systems. However, not all seem to be working. As others have suggested, trying it may be the only way to know for sure.
    If you haven't bought it yet and this is one factor then perhaps you could borrow a friend's iPhone to see. However, I wouldn't make this the primary reason to buy an iPhone.

  • In Aug I purchased an iPhone 5 with Verizon service  I live in CT not farm from NYC. I travel around the area and never see 4g LTE on the phone. I have reset the network and did a reboot. Nothing seems to help

    I have an IPHONE 5 with Verizon service. I never see "4G" or "LTE" come up on the phone. I have reset the network and have rebooted, to no success.
    I live in the NYC metro area. I travel to Cape Cod and never see 4g on the phone.
    Anyone have any hints or tips to fix this problem

    A Verizon iPhone will never display the 4G indicator. You will only see that on AT&T iPhones connected to their HSPA+ network. As for LTE, contact Verizon and make sure your account is provisioned properly.

  • How to use ZendAMF with multiple services?

    I followed Mihai Corlan's tutorial (http://corlan.org/2008/11/13/flex-and-php-remoting-with-zend-amf/) to create a remote service with Zend AMF, and it works great.
    But, I can't figure out how to use multiple RemoteObjects. I keep getting the infamous:
               faultCode:Client.Error.DeliveryInDoubt faultString:'Channel disconnected' faultDetail:'Channel disconnected
               before an acknowledgement was received'
    I set up my second RemoteObject the same way that I set up my first one.  But, I can't get it to work.
    Any suggestions? Has anyone seen examples of multiple services being used?
    Thank you!
    -Laxmidi

    I made a stupid php error.
    If you can do a single remote, you can do multiple ones. It's straightforward.
    -Laxmidi

  • Msg SE181 on ML81N/ME21N- PR WITH MULTIPLE SERVICES ITEMS-1 ACC. ASSIGNMENT

    Hi,
    when trying to create a new order using transaction ME21N or creating an entry sheet  on an existing order based on a purchase requisition  with multiple items in the tab services , the system gives the error message SE181 .
    Debugging , i've discovered that the part of code in wich the system gets stuck , is the following :
    PROGRAM  DIMP_GENERAL_SAPLMLSP - INCLUDE LMLSPF3W
    Check if accounting data is in sync with service data "846124
               IF ACC_TOTAL NE COMSRV-NETPR and glob_empty_package NE 'X'.
                  IF SY-TCODE = 'ML81'.
                    MESSAGE I181.
                    EXIT.
                  ELSE.
                    IF GLOB_SUBSCREEN_INIT EQ SPACE.
                      ACT_PACKNO = ESLL-PACKNO.
                      MESSAGE E181.
                    ELSE.
                      perform add_message using comsrv-packno
                                          'E' 'SE' '181' '' '' '
    Someways , it risults that the total of the items value inserted in the tab services , is different from the total NETPR in eban .
    But that is not true . ACC_TOTAL is the variable in which the values of the multiline services is put ; I thought that maybe finding out how it is populated could help me to fix the issue , but I did'nt manage to do that .
    Can somebody help me , please?
    Thanks and Regards,

    Hi,
    I have found a note for this error:
    1102653 SE181 with correct account assignment data
    1159878    ML81N: SE181 is displayed when you delete a entry s
    I have also seen many customers with same error that also applied some of the following notes:
    1113594    BAPI_PO_CHANGE - No rounding in multiple acc -> SE1
    846124     ME21N: Account assignment prompt missing for subite
    800471     ML81: Commitments and reference problems
    784911     ML81N Problems with account assignment
    749021     Service selection with incorrect documents
    716030     ML81N: SE001 when copying a new entry sheet
    709163     ML81N - Multiple Account Assignments - Postings inc
    Best regards,
    Arminda Jack

  • Is iphone compatible with europe gsm networks?  help me pls

    my friend is gonna buy iphoe from us for me . if he buy that i phone can i use it in my country (i m from turkey) is it compatible with our gsm networks (turkcell vodafone or avea ) ???

    You are wasting your money.
    The iPhone is sold in the U.S. as carrier locked with AT&T Wireless only. None of the iPhone functions will work until the phone is activated with AT&T Wireless. Inserting another SIM card in the iPhone will not work so to make a long story short, the answer is no. You will have a $600 paperweight only so save your money.

  • How do i block a number on my iphone 4 with cricket service/

    How do i block a specific number with iphone 4 and cricket service?

    Contact Cricket. Number blocking is a feature from your wireless provider,
    if they offer it.
    Or make a contact for that nuumber, assign it a silent ringtone and no vibration.
    Call will still come in, but you will not hear it.

  • Is unlocked iphone compatible with telus

    I currently live in Canada, and I ordered an unlocked iPhone from the Canadian online store. Is it fully compatible with TELUS?  I heard that unlocked devices does not support CDMA carriers. I wonder if this applies to TELUS.Someone please give me a clear answer!

    No it won't work.  Any unlocked iPhone that you buy is a GSM unlocked phone and will not support CDMA because they are different.
    If you want to use a phone with a CDMA carrier, then you need to purchase the phone from either the Apple store and purchase the TELUS version of the phone or go directly to the TELUS store and buy the phone there, but you can't use an unlocked GSM phone on a CDMA network - the two networks are different and don't use the same technology.

  • What makes a player compatible with subscription servic

    Hi all, this is my first post. I've been a Rhapsody subscriber for a year, and I want to upgrade to Rhapsody To Go. I have a MuVo TX FM, which is not compatible. What makes these things compatible or incompatible with subscription services? I just bought it last year, and I really don't wanna have to buy a new player just to transfer music thru a subscription service. Can anyone tell me if a firmware upgrade is in the works to make the MuVo compatible? Thanks very much,?Ed

    ...snip...
    You want to stay away from recordable-DVD and hard-disk camcorders,
    ...snip...
    Hope you don't mind me asking why? - As long as they've got a F/W connector how does the source media make any difference? - In fact, I would think that shuttling around would be faster with HD's or DVD's.....
    I also believe the salesperson was trying to say that he's going to need a BluRay deck in order to be able to view his HD material on an appropriately equipped TV - Which is correct, no?
    Thanks in advance for any comments,
    Cheers,
    Ian
    MBP 2.16G / 2GB FCE 3.5   Mac OS X (10.4.9)   etc etc

Maybe you are looking for

  • Balance Sheet translation at spot rate at ANY point in time

    My client produces its financial accounts in AUD.  They will have open items in AR, AP and Bank in foreign currencies.  WITHOUT running periodic valuation they wish to produce a Balance Sheet at any point in time during the month applying the applica

  • How do I reliably select text or highlight text with t440s trackpad?

    It's astounding to me that you remove so many buttons that most users rely on regularly, and then don't provide any obvious instructions or tutorials on how to use all this functionality. So I'm trying to do something incredibly simply with buttons -

  • Suggestion: add a link to the forum

    Some people ask question here in the community page for SQLA, I would like to suggest to provide them a simple access to the SQLA Forum, so that a one stop for questions and answers exists.

  • Load external swf

    Please if somebody could help me. I created main movie and named it main.swf. Then I loaded external menu by _root.createEmptyMovieClip("container", 1); loadMovie("menu.swf", "container"); container._x = 43 ; container._y =54 ; Now I would like to wh

  • Configuration CMS

    Hi all i have some questions regarding CMS i have to implement CMS to transfer design object and configuration object to PRD from DEV. my XI environment; DEV BOX, PRD BOX, SLD BOX, JDI(CMS) BOX. we have total 4 BOX. according to help.sap.com, "You en