Is analog audio out supported using the new lightning cable adapters ?

Yes. Both adapters (the .2m adapter and small adapter with no cable) have built in DACs just for that purpose.
For more information, read this story. It's a little long but it will explain in further detail:
http://www.macworld.com/article/2012137/hands-on-with-apples-lightning-to-30-pin -adapters.html
I personally have a speaker dock thing from iHome. It uses analog audio. I have tried it with both types of adapters and it works perfectly.

Similar Messages

I am trying to use the new iwork beta tools on iCloud. I currently have 10.8.4 OSX on my iMac and 6.0.5 version of Safari, but when I try to open documents on my iphone in the cloud it tells me my browser isn't supported

I am trying to use the new iwork beta tools on iCloud. I currently have 10.8.4 OSX on my iMac and 6.0.5 version of Safari, but when I try to open documents on my iphone in the cloud it tells me my browser isn't supported

Note that iWork for iCloud is only designed for PCs and Macs > http://support.apple.com/kb/HT5779
To access to your iWork documents on the iPhone, install Keynote, Numbers or Pages from the App Store

My old Apple ID won't allow me to use the old password to log out of the cloud. I can't use the new one, either. The new Apple ID is in the iTunes and App store. But I can't change it on the cloud without logging out. Which I can't do.

I can't use the old Apple id and Apple password on my new Iphone 6 - I can use the new ones. But I can't access the cloud in the meantime. The iTunes and App Stire has the new Apple ID, but I can't get into the settings to change it on the iCloud. It asks for the Old Apple ID and password, which doesn't work. Does anyone know how to change the old Apple ID on the iPhone in the settings for the iCloud?

First, try the new password. If you didn't sign out of iCloud prior to changing the primary email address of your Apple ID, this is what can cause this problem.
Also, read this: If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support

Hi - just using the new iMovie for the first time - apparently there should be a sidebar containing tools like "Content Library". Not on mine - even in Window view, Content Library features like text etc are all greyed out - obviously it's me - help?

Hi - just using the new iMovie for the first time - apparently there should be a sidebar containing tools like "Content Library". Not on mine - even in Window view, Content Library features like text etc are all greyed out - obviously it's me - anyone help please?

Sorry - I should have added that I have imported a Quicktime movie, originally created as an iPhoto slideshow.
I want to create rolling credits at the movie end and apparently you can only do this using iMovie - can you help please?

Macbook Pro 2.53 mid 2009 came with 60 watt magsafe can I use a 85 watt without issues also can i use the new aluminum tip one?

My macbook came with a 60 watt magsafe charger with the white magnetic tip. It crapped out on me and now need to buy a new one but everyone says it uses a 85 watt which is false since i bought it new and the 60 watt charger came in the sealed box.
1. If I buy the 85 watt will it damage my macbook pro?
2. can I use the new magsafe charger with the new aluminuin tip with my macbook pro?
Look below in red is the proof
15-inch Configurations
Enclosure
Precision aluminum unibody
Processor
2.53GHz Intel Core 2 Duo
2.66GHz Intel Core 2 Duo
2.8GHz Intel Core 2 Duo
L2 cache
3MB shared
3MB shared
6MB shared
System bus
1066MHz
1066MHz
1066MHz
Memory
4GB (two 2GB SO-DIMMs) of 1066MHz DDR3 SDRAM; supports up to 8GB
Hard drive4
250GB Serial ATA; 5400 rpm
320GB Serial ATA; 5400 rpm
500GB Serial ATA; 5400 rpm
Slot-loading optical drive
8x SuperDrive (DVD±R DL/DVD±RW/CD-RW)
Graphics
NVIDIA GeForce 9400M graphics processor with 256MB of DDR3 SDRAM shared with main memory3
NVIDIA GeForce 9600M GT graphics processor; and NVIDIA GeForce 9400M graphics processor with 256MB of DDR3 SDRAM shared with main memory3
Graphics memory
256MB GDDR3
512MB GDDR3
Video
Built-in iSight camera; Mini DisplayPort output port with support for DVI, VGA, and dual-link DVI (requires adapters, sold separately)
Display
15.4-inch (diagonal) LED-backlit glossy widescreen display, 1440-by-900 resolution
Expansion
One FireWire 800 port (up to 800 Mbps), two USB 2.0 ports (up to 480 Mbps), SD card slot
Audio
Built-in stereo speakers, built-in omnidirectional microphone, combined optical digital input/analog line in, combined optical digital output/analog line out
Networking
Built-in 10/100/1000BASE-T (Gigabit) Ethernet
Wireless
Built-in AirPort Extreme Wi-Fi (based on IEEE 802.11n draft specification)2; built-in Bluetooth 2.1 + EDR (Enhanced Data Rate) module
Hardware accessories
60W MagSafe Power Adapter, AC wall plug, power cord
85W MagSafe Power Adapter, AC wall plug, power cord
Limited warranty
and service
Your MacBook Pro comes with 90 days of free telephone support and a one-year limited warranty. Purchase the AppleCare Protection Plan to extend your service and support to three years from your computer’s purchase date. Only the AppleCare Protection Plan provides you with direct telephone support from Apple technical experts and the assurance that repairs will be handled by Apple-authorized technicians using genuine Apple parts. For more information, visit Apple support or call 800-823-2775.
Apple and the global
environment
Learn more about Apple’s dedication to reducing the environmental impact of our products and processes. The Apple Product Environmental Specification details the environmental attributes of our products.
Recycling
Apple takes a holistic view of materials management and waste minimization. Learn more about how to recycle your Mac.

Yes, you can use the 85 watt adaptor. You cannot use the new adaptors because your computer is not equipped with the proper MagSafe connector. But you can use the older MBP adaptors as well as a 60 watt replacement adaptor. All can be found at Apple's Online Store.

Will the new lightning to 30-pin adapter support.... ?

Will the new lightning to 30-pin adapter support a cord at which the 30 pin goes and splits into a RCA cable for audio output and USB for charging, this is what is used in my car currently to feed my former iphone 4 into the cars stereo while also charging? My question is there is no video output only audio and charging, will it work?

doubt it as it would be as easy for the old charger to do that as the new ligthing
when a feature is removed then it would not make much sense to remove it and then reinterduce it later on with no benefit to the producer of the product

There is a problem with using the new Hotmail attachment buttons with firefox 3.6.8

I use firefox 3.6.8 browser and was unable to use the new attach file buttons in the newest version of hotmail. .
I sent a help request to microsoft and got back a 'generic' answer that the new hotmail works with all browers; ie, safari, chrome and firefox 3.0+.
Well, that is not exactly true. Because I then troubleshot the problem by opening hotmail in ie vice firefox I was able to attach multiple files (pics/documents) with no problem.
I then went back to firefox and still had the same problem.
The mouse pointer just hovers over each icon where there should be a button and no clicking is there to be clicked....so, there is no way to attach.
hopefully you'll get it worked out soon.
regards, rob N

Although possibly not related to your problem, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
As for your problem, hopefully this support article is what you need:
http://support.mozilla.com/en-US/kb/Websites+look+wrong
In any case, it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

I am using the new iohone 5 , factory unlocked .

i am using the new iohone 5 , factory unlocked .
i had used a nano sim card from a GSM company called 3 in the UK, but now want to switch , but now that i got the new nano sim for another GSM called Orange . but when it inot my itunes , or do the activation via wifi , it tells that the sim is not supported ,, can you help me out need it badly

You do not have an unlocked phone. You have a phone tht is locked to 3. Only they can authorize unlocking it. Contact them.
If you purchased the phone at Carphone Warehouse in the UK, they do NOT sell unlocked phones. The iPhones they sell will lock to first UK carrier used.

I can not use the new Itunes. I have managed to erase my shuffle and can not get any songs from my library onto my ipod shuffle now!!!!!! Tutorials do not help!!!!

Ineed a manual to use the new Itunes. The simple easy to use version is gone. The new version is TOO complicated !!!!!!!

Hello SandyGF
I would check out the following article that will bring back the sidebar that will make iTunes a little more familiar and get you back on track with syncing your iPod Shuffle.
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I have no audio unless I use the Lookout App first..then all is good...i have no volume bar unless I use Lookout

I have no audio unless I use the Lookout App first..then all is good...i have no volume bar unless I use Lookout

MGoodie wrote:
I have done as you asked and it is still the same.
I have also previously "flattened" my playbook several times in the hopes my sound settings would be reset.
Is there nothing like a diagnostics app or an app/interface to be able to manually change options such as sound outputs.
If there is not please make one as it would be very much appreciated.
I have tried downgrading the os aswell. I have never had the audio switch to the speakers.
Something has been "switched" and will not reset by os change or updates.
::Edit::
I have tried the new 201 update and it did no correction to audio or the availability of a manual output option.
::End Edit::
I am asking that a manual option be made available to force output changes. if this was possible I would know if it is software or hardware related.
I also want to make it very clear that I am highly disappointed with this glitch. your tablet would be #1 in my eyes otherwise.. I want my sound back RiM, make it work.
Based on the above i think you might have a hardware issue and only a call to support will get it addressed.
it does have a 1 year warranty on it by RIM. Place of purchase might be 30 days or longer depending on where you bought it from.
http://us.blackberry.com/support/playbook-support/contact.jsp
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

I have just been told by Adobe that I have to UNINSTALL ALL PREVIOUS VERSIONS OF THEIR APPLICATIONS IN ORDER TO USE THE NEW 2014 VERSIONS.

I have just been told by Adobe that I have to UNINSTALL ALL PREVIOUS VERSIONS OF THEIR APPLICATIONS IN ORDER TO USE THE NEW 2014 VERSIONS. No software update is worth the time it will take to do that!!!!! I don't know about the rest of you but I am woefully disappointed in Adobe. I pay on time every single month SINCE CREATIVE CLOUD BECAME AVAILABLE and now they place this on me? NOT HAPPY.

THE LATEST AND THE LAST:
Oh, and I'm on a MAC, not a PC so how could my database be corrupted?
Shruthi: The caps.db file is located in Library/Application Support/Adobe/caps folder
Shruthi: Can you try uninstalling from Adobe installers.
Susan Meredith: You folks don't understand. Most of us are very excited at the new "bells and whistles" that Adobe has introduced and in the past we've been able to QUICKLY update to the new version. We haven't had to uninstall anything to get the new. We are all working and have deadlines. This is A HARDSHIP ON ADOBE'S USERS AND THEY NEED TO FIX IT ON THAT END. Or give up some monthly fees.
Susan Meredith: There are many ways to uninstall. I can do it through "CleanMyMac". But now I don't trust that Adobe's programs will actually download and then I'm in trouble...and out of business.

Photoshop CC: How do I use the "New 3D Extrusion" feature on a text layer?

I have a (text) layer selected, and I need to use the New 3D Extrusion tool to work on it, but when I go to the option for it, it's grayed out and I can't click it!
I have one layer selected (and it isn't locked). When I right-click the layer, "New 3D Extrusion" doesn't appear, so I have to click the Select tab at the top, in order to see New 3D Extrusion. It was there, but I couldn't select it! What am I missing?

Yeah i think it might be because of my drivers :/

HELP! My old mac was requested to upgrade Firefox to 14.0.1. After the sucessfully installation, I received a message saying my old Mac couldn't use the new Firefox and Safari crashes. I have NO browser now!!!

My old mac was requested to upgrade Firefox to 14.0.1. After the sucessfully installation, I received a message saying my old Mac couldn't use the new Firefox and Safari crashes. I have NO browser now! Any help would be appreciated.

Hmmm... So you upgraded Firefox and now neither Firefox or Safari will work? Very weird. I have no idea what might have gone wrong. That said, when things start acting wierd, I always try a bit of maintenance first. About 95% of the time, I luck out and it works.
I use the free program Onyx. I run all the clean up routines. Then I boot to the recovery partition (Lion) or the OS X Install Disc and repair permissions and verify/repair the hard disk.
Hope this helps.

Using the New Mac Pro (can) - AE will not let me use Race Traced 3-D

Using the New Mac Pro (can) - AE will not let me use Race Traced 3-D
Hi, I'm using the new Mac Pro
2.7 GHz 12-core Intel Xeon E5
64 GB 1867 MHz DDR3
AMD FirePro D700 6144 MB
OSX 10.9.2
I'm using After Effects 12.2.1.5
When I attempt to invoke the race trace 3D renderer in a comp, I get this error
"After Effects Error: Ray-traced 3D: Out of paged mapped memory for ray tracer. Your project may exceed GPU limits. Try closing other applications. Try updating the CUDA driver. (5070::2)"
My preferences are set to use the CPU for Raytraced 3D since I do not have an Nvidia card.
So, obviously there is an issue here in that it thinks I have an Nvidia card.
I know (or assume I know) the cause for this is that when I set up this machine, I used Apple's migration assistant to move most of my data over from the previous gen Mac Pro which DID have a CUDA card.
So my question is, what files can I delete/reset to cause After Effects to no longer look for CUDA files that do not exist on this machine?
I do not have the CUDA control panel in System Prefs, so THAT did not carry over.
Any ideas would be appreciated, thanks!

> I know (or assume I know) the cause for this is that when I set up this machine, I used Apple's migration assistant to move most of my data over from the previous gen Mac Pro which DID have a CUDA card.
Ugh. That causes so many problems.
The first thing to try is deleting the CUDA frameworks from your Mac: Look in /Library/Frameworks for the CUDA.Framework and get rid of it.

How can I attach an image without the image is in the email body? (using the new mail the Lion)

How can I attach an image without the image is in the email body? (using the new mail the Lion)
I want in attachment, not in the body mail.

I think your only solution is to zip the image files first and then attach them.
Read this from a site I found:
Sending Graphical Attachments -- When you attach a graphical image to your message, the recipient of your message sees the image inline (that is, in the body of the message) if her email client supports inline display. ("Take Control of Email with Apple Mail" contains a table listing the capabilities of popular Mac and PC email clients.) If a client does not support inline display (or the recipient has turned off the inline display option), the file appears as an attachment that must be opened in a separate program.
On the one hand, an inline image is easier for the recipient to see - all she has to do is look at it. On the other hand, inline images can be frustrating to scroll through. If you do not wish to send a graphical image inline, you must compress the file before attaching it - Mail, sadly, lacks a built-in compression option, though fortunately for Panther users, the Finder offers Zip compression without requiring a separate application.
Note that when you compose a new message, Mail always shows attachments in the body of your message. You can manually drag them somewhere else, but many email clients display all attachments in a separate list, regardless of where you place them in the message body.
If you paste an image into a message or drag & drop an image from another window (say, a Web browser), Mail converts the raw image data to an attachment in TIFF format. On the other hand, if you drag & drop the icon of an image file (or use the Attach button to locate the file using the file browser), Mail leaves the attached image in its original format. This difference is significant, because although most email clients can display JPEG images just fine, support for TIFF - especially in non-Mac email clients - is less common. If possible, I suggest attaching image files as opposed to pasting or dragging in raw image data.

Is analog audio out supported using the new lightning cable adapters ?

Similar Messages

Maybe you are looking for