Is and will hardware decoding of DTS be working in future driver releas

I have an Audigy 2 ZS card that when I had windows xp both AC3/DD and DTS Hardware decoding was working, now I have been running Windows Vista 64 ultimate with SP and using the recent beta drivers from creative I am getting Dolby Digital hardware decoding only but no DTS decoding from my hardware as like from before with XP, is anyone else getting hardware DTS decoding in Vista 64 or is this a feature still lacking untill the final driver release comes to be Available (crossing fingers) in July?

I turned to him, I was sent to [email protected]
my messege -
Hello, dear DEV's
I want to inform you that the new update 5.0.2 Lollipop there are errors / defects
about them, I want to tell you that in the next update you corrected them ..
also I would like to offer a few ideas.
So, can i contact with you ?
With good wishes
Antonio.
Hi Antonio,
Thanks for your email. You can report the errors to our consumer forum at talk.sonymobile.com.
Thanks so much!
Best regards,
Developer World
so what do i do ?

Similar Messages

I have an ipod touch 2nd generation and i have a white screen and will not turn off( it was working fine this am) help!!

I have a ipod touch 2nd generation and i have a white screen and will not turn off. My ipod was working fine this am, i was checking my facebook acount when it just went white.

That symptom is covered here:
iPod touch: Hardware troubleshooting

Since upgrading firefox my tiscali (through Talk talk) email account will not allow me access to my emails saying 'You have undefined new mails in your inbox' and will not open the page. it works on Internet Explorer.

It thinks there is no information there! If I revert to 3.6 how long will security be maintained. At the moment I am opening Mozilla for web browsing but IE for my email account. I am not very PC literate so need simple answers.

Apparently TalkTalk mail will work with Firefox 4 and Firefox 5 ''if'' you set the browser to ''lie'' to TalkTalk mail by saying that you are still using version 3.6.
You can find the instructions for that in a post on the TalkTalk forums: [http://www.talktalk.co.uk/forums/showthread.php?t=185113#post2452787 Firefox 4 & TalkTalk webmail - Forums].
Note: when you open about:config the first time, it will display a warning message that you should be careful with the changes you make. That's definitely good to bear in mind.
Does it work?

Will Lightroom 5.0 or 5.3 open raw files from my Canon 70d and will I subsequently be able to work on them in Photoshop CS 5?

I don't want to convert to DNG files. I have have Lightroom 4 and Photoshop CS 5, neither of which will open my raw files from my new Canon 70d. Trying to decide between buying the education version of Lightroom 5 with update to 5.3 if that will do the trick or joining the creative cloud for $9.99/month. Would appreciate accurate advice. Thanks.

You need Lightroom 5.2 or later. The educational version should work fine.

What is WebKit2WebProcess.exe *32? It is making my laptop slow and will not let me open Windows Works. (172,760 K in memory usage)

I installed Safari 5.1 and this [email protected] *32 is running up some memory, just a couple a moments ago up to 192,363 K of memory. I can't open Microsoft Works documents, it will not let me change a file destination. What does it do? Do I need it? Should I uninstall safari 5.1?

I have a similar problem. When I run Flash games on facebook within the CPU crashes.
* HP Pavilion DM1z - Windows 7 Ultimate 32bit

Software Decoding vs Hardware Decod

I know this has been brought up in several other threads previous to mine (http://forums.creative.com/creativel...y.id=605#M2688) but so far, I haven't found out the answer to my questions. So, maybe if the moderators could participate in this topic as well, that'd be great.
I currently have a SoundBlaster Li've 5. X-Gamer and I just recently got Logitech X-530 speakers. I'm playing a movie, and I'm absolutely amazed how much better it sounds with a 5. system. I was using Power DVD 6.0 to play this movie and it was set to 6 channels, so I think this was software decoding and not hardware decoding. Or am I wrong? Anyhow, my question is as follows:
) What is are the differences between software and hardware decoding?
2) To use hardware decoding on my SB Li've 5., how do I enable it's
3) I'm not using a receiver, so is this really Dolby Digital?
Thanks for reading this.

"but so far, I haven't found out the answer to my question"
read the stickies.
"I was using Power DVD 6.0 to play this movie and it was set to 6 channels, so I think this was software decoding and not hardware decoding"
You're right
"What is are the differences between software and hardware decoding? "
CPU usage
"To use hardware decoding on my SB Li've 5., how do I enable it's"
read the stickies: be sure that your SPDIF setting is set to decoding and set your DVD software audio output to SPDIF.
"I'm not using a receiver, so is this really Dolby Digital?"
Dolby Digital is sound format as any other, so no relation with a receiver.

Secured wi fi network gives timeout and will not accept password. Works on i pad and iphone

My Macbook Pro network was secured and worked on ipad and iphone. Now it gives me a "connection timed out" message on laptop and will not accept password. It works on ipad and iphone. Anyone with an explanation. I cannot get it to let me delete from the macbook pro. Had to set a new unsecured network to just get on internet. Running 10.7.4 and is up to date.

I deleted all and then set up an unsecured network. When I go to system preferences>Network and where the Network Name is, I click join other networks, then click show networks the secured net work is still there and when I click on it, it gives me the timeout message. This is causing a problem in trying to get my wireless printer back on line as it keeps going to this secured network. Can you help with this problem. I would like to remove the secured network completely from my computer. I have gone to the Advanced and deleted all. The only one showing there is the unsecured network.

Imac 27" Intel Core 7 CPU. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware scan and all is fine. Did clean wipe from Mavrick back

Imac 27" Intel Core7 CPU 16 Gig RAM. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware diagnostic and all is fine. Did clean wipe from Mavrick back to Mountain Lion but problem remains. Apple Store can do no more.

I did some more digging, it appears to be a backlight problem only. I can see the screen very dimly if I use a bright flashlight in a very dark room. It also seems to run ok if the brightness is turned down a LOT.
So I'm thinking this is a LED driver board issue or the display itself. I'll open it up and check the connection between the two and see if I can get any more clues. At least I can use it somewhat now by dimming the display significantly...

HT201343 I have a late 2008 Mac Pro Quad Core 2x2.8 Intel Xeon with Lion 10.7.5- do I need Maverick and will this hardware support the Airplay Mirroring?

I have a late 2008 Mac Pro Quad Core 2x2.8 Intel Xeon with Lion 10.7.5… do I need Maverick and will this hardware support the Airplay Mirroring?

It doesn't mention anything about a Mac Pro. So no.
http://support.apple.com/kb/HT5404
If your computer did support it, you would still need 10.8 or 10.9 for Airplay to work.

Hardware Decoding!

hi does anyone knw if the PCI-E Creative SB Titanium does Hardware decoding of Dolby Digital, DD EX, DTS, and DTS ES?
Thanks
Message Edited by Zaim on 0-3-2009 06:0 [email protected]

As I know no sound card ever had Hardware Decoding it's all by software with PC, hardware dsp that will do decoding?have no point you have software + cpu so it is using present?hardware?with software [email protected]

[Solved] h.264 hardware decoding on an AGP card in Linux?

It's harder for those of us with older hardware because all the new recommendations are useless to us. Especially when you use Linux as it seems everything is talking about directX and Vista or Windows 7 which mean nothing to me.
AGP 8x
will be doing h.264 decoding and occasional editing
1920 x 1080 resolution LCD (dvi or hdmi)
dual head would be a plus for later but not vital.
Not a gamer at all.
Needs to work well with Linux, of course.
I'm running on an old P4 3.0 Ghz so if I can get the encoding/decoding offloaded (especially for flash) on to the GPU this would be a huge help.
Price < $70 on Amazon or Newegg (possibly more if it's really worth it)
I've been looking at a Radeon 2400 Pro 512MB Agp on Amazon but wanted to see if anyone had a better suggestion before I pull the trigger so to speak.
[06/17/2010 - changed subject from "Which AGP Video card would you recommend?" to "h.264 hardware decoding on an AGP card in Linux?"]
Last edited by davidm (2010-06-19 17:41:56)

Someone asked me for an update via email so I just realized that I forgot to post as I promised. It's working out pretty good. I can play 1080p h264 movies using mplayer with only about 10-30% use of my 3.0 P4 HT CPU using VDPAU. I wasn't able to get it (x.264 GPU decoding) to work with vlc or the system ffmpeg though. At least when I set this up many months ago. So if anyone is just looking to be able to play 1080p h264 videos I definitely would give a VDPAU capable PCI card a shot if you have no other viable choices for your old hardware. Using mplayer with VDPAU properly configured I don't experience any stuttering at all on my old hardware, believe it or not.
03:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Device 19f1:0a5e
Flags: bus master, fast devsel, latency 0, IRQ 21
Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at ec00 [size=128]
[virtual] Expansion ROM at fafe0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Kernel driver in use: nvidia
Kernel modules: nvidia, nouveau, nvidiafb
Last edited by davidm (2010-10-28 20:07:36)

How to get dolby hardware decoded sound in xtreme ga

I bought the creative xtreme music when xfi first came out for use in my htpc. I connected the sound card with my creative gigaworks s750 speakers to watch movies on my 42 inch plasma.
After the xtreme music died. I went out and bought creative xtreme gamer(as xtreme music was no longer around) without realizing that xtreme gamer did not hardware decode dolby. ?
Since the replacement of xtreme music with xtreme gamer; I have always had a problem with the clarity of dialogue in movies.
It was only a few days ago that i stumbled upon this issue of "hardware vs softwer" decode of dolby sound in creative sound cards while reading about daniel K fiasco., So now like any audio head, i desperately want hardware decoded sound from my xtreme gamer sound card for dvd's in my htpc.
As per release notes of the new xfi drivers (see below), I won't have hardware decoded dolby sound even, if i install the new drivers released by creative which supposingly allow hardware decoded sound as i own xtreme gamer.
Sound Blaster X-Fi Series with DVD-Audio Playback and Dolby Digital/DTS Decoding
So is there any moded driver out there which can help me get hardware decoded dolby sound from my xfi xtreme gamer sound card.
Thankyou in advance.

after having slept a couple of hours and read about a bit about pulse and jack the general feeling I get is that they cause people trouble.
Understanding how to write a good .asoundrc seems to be the best option, but a bit complicated. Since I didn't actually want sound from both cards, but merely a simpler way to switch, I've given up for now. I wrote a simple script to do it for me, and running that is actually simpler than fiddling in alsamixer, finding and muting/unmuting channels/cards
I don't feel I've solved the issue, since I didn't get what I asked for (sound from both cards at the same time) but I have what I want (a simple way of switching) and I know where to look (finding out how alsa handles virtual cards, setting one up and send all sound that goes there to my actual cards or configuring pulse/jack this thread was sort of helpful as it begins to explain a .asoundrc) if I feel a need for it in the future.
Thanks anyway for all the help. After 4 years of Arch use (and more then I can remember on linux) I still feel like a noob sometimes. It's good to have a community.
here is my, almost, solution
#!/bin/bash
#creating or uncreating the .asoundrc config file by renaming it
if [ -f $HOME/.asoundrc ]
then mv -v $HOME/.asoundrc $HOME/.asoundrc-no-use
echo "this should give audio to your speakers"
echo "more specificly, audio from the motherboard (default) soundcard"
elif [ -f $HOME/.asoundrc-no-use ]
then mv -v $HOME/.asoundrc-no-use $HOME/.asoundrc
echo "this should give sound from the HDMI on the graphicscard"
else
echo "this script doesn't do your setup"
fi
#restarting alsa is needed to read(or not find) the .asoundrc config file
#and to do that you need privileges
sudo /etc/rc.d/alsa restart
exit 0
combined with
~/.asoundrc
pcm.!default {
type hw
card 1
device 9
Last edited by openess (2012-08-18 20:08:26)

I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated.

I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated. Now I can't even remove the program at all. Why is this happening?

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

HT6162 My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?

My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?

Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
The app store always gives you the option to use a previous version of the app IF it is available for your device.
Sorry but you are stuck without new hardware.
PJRS

HT201263 When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong

When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong?

- Try a reset. Nothing is lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
- If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
- If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.

Is and will hardware decoding of DTS be working in future driver releas

Similar Messages

Maybe you are looking for