Is annotation for a hyperlink to another video is possible from the original video?

hi there,
i have been working on Adobe Presenter trail period for a while and thanks to adobe it's a tremendous help. i have a doubt- is it possible to hyperlink to another video from the original video.
i.e after creating a video i want to integrate another video into the original one through an annotation that will be displayed on the original video which provides a link for my second video.

Thank you, Ian. That sub-menu is what eluded me all right. It certainly seems to me to be one way I can do this: using the Paste Formula Results sub-menu under Edit. But before I copy the cells as you say, I will have to take several prior steps.
In the new sheet I have to select the top left cell of the subject range and there enter "=". Then, in the original sheet, I must select the corresponding cell. Returning immediately to the new sheet, I need to drag the cell right to extend the formula to two adjoining two cells. Now I need to drag those three cells to extend the formula to the bottom of my table (quite a number of rows, but the number matches that of the original sheet). Only at this point am I in a position to apply your suggested method: that is, copy what's already selected and use Shift-Command-V to paste the formula's result throughout the range.
I feel sure that will do it. But if anyone has any further suggestion as to how this could be done less cumbersomely, I would be very happy to hear it before I embark on the task ahead - because that will have to be repeated for another 24 new sheets in a couple of files. Quite a lot of work.
So, whilst you've helped me materially, a question still remains as to whether some other method might be possible?
Regards,
Peter White

Similar Messages

What is a good video converter for iMac? Premiere 6 will not capture from the Canon VIXIA HF G20.

What is a good video converter for iMac? Premiere 6 will not capture from the Canon VIXIA HF G20.

Rather than convert, you'd be better off capturing with a more current version of the program -- one that supports AVCHD video. Otherwise, you're in for a lot of headache. A converter isn't going to solve your problems.
BTW, when you say Premiere 6, do you mean Premiere 6 -- which is over 10 years old? (There was no Premiere Elements 6.)
Trust me on this: Capture with a Mac version of Premiere Elements 11 or 12 and your video will be perfectly compatible with any Mac program.

How do I output the smoothest video when changing or mixing frame rates from the original footage?

I have been experimenting with various Media Encoder settings, and wondered if there was anything else I can try to get the smoothest video output possible, especially when changing frame rate and possibly resolution. For clarification, let me start from the beginning and explain what I'm doing and what I've tried so far. I'll try to be as brief as possible, but if I do go into too much detail, I apologize.
My original footage is AVCHD 1080p - 60fps. (my camera only does 60fps...specifically 59.94fps) We're not talking interlaced video here, I'm staying away from that. This is definitely full frame, progressive video at 60 frames (not fields) per second. My output will ultimately be for the web. I have been keeping my output codec (H.264) and bit-rate (VBR 2-pass, relatively high-bitrate) consistent, and have been trying numerous output options and even sequence settings to see what would yield the best results. I am using Premiere Pro CS5.5 along with Media Encoder. Here's what I've done and the results I've observed:
1. I created a sequence with 1080p - 59.94fps settings to match my original footage. I then output both 1080p and 720p versions at 59.94fps, and at 29.97fps. The 59.94fps output files looked absolutely great, as would be expected. Extremely smooth. The 29.97fps output files were generally smooth, but not near as smooth as the 59.94fps. This is expected since it's half the frame rate as my original footage. However, my question is this: What exactly is Media Encoder doing when "down converting" from 60p to 30p? From a technical stand point, is it dropping every other frame? I'm just curious to understand exactly what it does. I tried the Frame Blending option as well, and that only yielded a bit more blur to the images which wasn't desirable for any of the output files.
2. Just to see what would happen, I created a sequence with 1080p - 29.97 settings. I then output both 1080p and 720p versions at 29.97fps. The video was much more choppy in these cases, even with Frame Blending on. Now, I know not matching my sequence settings with my original media isn't ideal, but I again just want to understand why this yields less smooth video than the 29.97fps options above. Why does cutting the sequence settings frame rate in half from the original, then outputting the same frame rate as the sequence yield video that is not as smooth?
3. Next, I wanted to try mixing frame rates to see how Premiere and Media Encoder handled the footage and output files. Premiere handled it great, no issues there. However, I had some interesting things happen when I output the files. Here's what I did: I created a sequence with 1080p - 59.94fps to match my original footage. Then I took the same exact footage that was in my sequence, copied it in my project panel and interpreted it at both 23.976 and 29.97 fps, yielding slow motion video. The slow motion video looked great in Premiere, so I went ahead and just added it to my sequences, along with the original 59.94 footage. I also created separate sequences for the 29.97 and 23.976 footage respectively, each with matching sequence settings, then added a nested sequence to another original footage sequence (with 59.94fps sequence settings) to see which yielded the best results. Basically, I'm trying to output 59.94fps that match my original footage, but also throw in some slow motion footage at different framerates. I'll explain my results in a moment as they are a bit convoluted, however, here is my question: When mixing frame rates and trying to output the smoothest video, am I going about this the right way? I would assume you would use your sequence settings that match the original footage (which is what the majority of the footage will be), then bring in a nested sequence for the slow motion (as oppose to just dropping the slow motion video directly into my main sequence), and then output to the same frame rate of the majority of the footage, in this case 59.94fps. Is there a better workflow for this?
The results to #3 above were as follows. Initially, it looked like it didn't matter if I nested the slow motion sequence into my main sequence, or simply dropped the actual slow motion video into my original 59.94fps sequence. It seemed to produce smooth results either way. Frame Blending blurred the video a bit, but didn't seem to make much difference, and quite honestly I like the footage without Frame Blending in general. However, when I closed down Premiere, and opened the output files later (opening in Quicktime), the footage looked choppy. In fact, it would go from choppy to smooth and back, almost like it had an irregular cadence (don't know if I'm using "cadence" in the right context here). I would then open up Premiere again, import the output footage into my project panel, and play the footage in Premiere, and it would play back smooth again. Is this a Quicktime issue? I was playing 1080p 59.94fps files when this happened, so maybe it's just because it's a large file. Doesn't seem to have issues with the 720p files I created. But it sure threw me off with my testing because I then started second guessing the settings I was using. My iMac is the latest 2011 model with plenty of RAM, so I wouldn't think it's the computer. Thoughts?
4. Next, I noticed on ALL my output files (again, using the H.264 codec from Media Encoder) that the color of my video seemed to flatten quite a bit. It seems that the original footage has more contrast and saturation than the output files. I figured maybe this was just how it was, but when I re-imported the output files back into Premiere, they looked IDENTICAL to the original footage. And in Media Encoder's Source/Output windows, I don't see any difference there either. Is Quicktime again the culprit here, doing some odd things to the color of my videos?
5. Regarding Frame Blending, when is the best situation to enable this option in Media Encoder? I've read it is when mixing frame rates, but I honestly didn't see too much of a change except for a bit more blur, which I didn't care for.
6. Lastly, my conclusion is that 60fps yields the smoothest video, which is an obvious conclusion. However, I know that 60fps isn't the best or easiet frame rate for web delivery. It seems 30p is more the standard. Are there any integrated web players that would play 60fps? Can you get 60fps video on YouTube/Vimeo? If yes to any of these questions, can they do 720p and 1080p at 60fps?
Those are all my questions. I hope I am clear enough without being overly wordy and hopefully I didn't put too many questions into one post. Thanks in advance for any insight, I really appreciate it.

Did you ever figure out which output worked the best? I have the same original footage; trying to determine the best output settings to make a dvd for tv.
thanks!

I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked. What am I doing wrong?

I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked, so that when I delete a song from one library it deletes from the other one.
On the online tutorials I've seen it shows that when you create a new iTunes library it should open as a blank account, but that isn't happening.
What am I doing wrong?

If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
If necessary:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X

How do i add songs to my ipod from another computer without losing the music i already have on it from the original computer?

i want to connect my ipod to a friends computer to get some of her songs on my ipod. every time i do this tho it deletes the songs i already had on my ipod from the original computer. how do i get this to work? please help

When you connect the ipod and are prompted to erase and sync....just click cancel. Then click the ipod name below devices in the itunes source pane. From the ipod summary screen you want to check manually manage music and videos under the options tab. Apply the changes and you are now set to manually sync. Which means you just drag and drop the music you want to sync to your ipod below devices in the itunes source pane. Refer to this for more detailed instructions: http://support.apple.com/kb/HT1535

Hi I bought 2TB WD my passport for mac but I do not know what I can delete from the original macbook air. Thank you.

Hi I bought 2TB WD my passport for mac but I do not know what I can delete from the original macbook air. Thank you.

That depends on what you have on the MBA...if you have videos, move the videos to the external drive. If you have a lot of music, create a folder/library for the music and point iTunes there for the music. If you have a lot of photos for iPhoto, make a new library on the external drive and move our photos over there and then select that library as the default library for iPhoto to use.
Those are the big files and should take a lot of the load off the internal storage.

How do you reactivate this phone in another family member name after the original owner now deceased

How do you reactivate this phone Verizon Droid Maxx in another family member name after the original owner now deceased

To switch it to another number, you need to activate another phone on the number you no longer need (or have Verizon cancel it for the deceased member). Once that line is no longer active, you can activate the phone on another number - have Verizon CS at a store help you, or follow the steps on verizonwireless.com from the account of the person you do want it to be activated for.

HT204053 I have one apple ID that my entire family has been using. How do I create new apple ID's for each of us and move the appropriate content to each new ID from the original apple ID now that we all have our own devices?

I have been using one apple ID for 4 family members. Up until now it hasn't been a problem but now that we all have our own devices how do I create new apple ID's for each of us and them move the approprioate things from the original apple ID account to the new ones for each of us?

stuartx4 wrote:
Thanks Csound1, wish I have seperated everything from the beginning but when your kids are little and start buying music etc it just didn't seem like an issue.
That has a familiar ring to it

HT201269 I am trying to save memory on my iPhone 4S/ ios6. Can I back up all photos to icloud and the external hard disk I normally use for photos? If I then delete photos from the iPhone do the get deleted on iCloud?

I am trying to save memory on my iPhone 4S/ ios6.
1) Can I back up all photos to icloud and the external hard disk I normally use for photos? If I then delete photos from the iPhone do the get deleted on iCloud?
2) Can I back up the newsstand to iCloud and save memory on the iPhone?
3) Can I back up the bookshelf to icloud and save memory on the iPhone?

1. What format is the external drive? It sounds like it's ina format that Macs can't write to. Is it a NAS or NTFS?
2. Easiest thing: just move your iPhoto Library to the external
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

Hello SamSax
Check out the assist page below for troubleshooting call connectivity.
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How can I turn off the sound from the original midi or audio tracks when I turned on the duplicate tracks for editing ?

How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

Dan,
It sounds like one of your preferences has changed.
Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
Hope that helps

For no apparent reason, the printing from the iPad to the HP wireless printer was no more possible, while it was still possible from the iPhone.

For no apparent reason, the printing from the iPad to the HP wireless printer was no more possible, while it was still possible from the iPhone 5. Any idea why?

Gutenprint drivers are intended for non-laser printers. HP supplies the proper drivers, and you can download the latest version directly from HP's support site. Or you can install the most recent HP drivers provided by Apple.
Printing speeds do not include the time it may take to transfer data to the printer. It also doesn't take into account the time it takes for the printer to be prepared to start printing. Color is much slower than B/W.
Contact HP for any additional assistance you may need since these forums do not provide support for non-Apple products.

How do I reorganize my photos on iPad 2? I need to move (not copy) photos from one album to another. When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all a

How do I reorganize my photos on iPad 2? I need to move (not copy) photos from one album to another. When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all albums. Please help.

You can't do it directly on the iPad - the new album functionality basically only allows you to copy photos into those new albums, you can't move them. The way that I think of it as working is that you are just creating pointers to the photos in those new albums, so if you then delete the original photo on the iPad you therefore automatically delete all the pointers to it.
If you want to re-organise your albums then you will need to do it on your computer and then sync those albums over to the iPad

HT4718 I had a copy of Mountain Lion on my late 2008 MacBook Pro, having replaced Lion which it came with. But the drive,crashed, so I replaced the drive and reinstalled Lion from the original disks I had. How do I get another copy of Mountain Lion?

I had a copy of Mountain Lion on my late 2008 MacBook Pro, having replaced Lion which it came with. But the drive crashed, so I replaced the drive and reinstalled Lion from the original disks I had. How do I get another copy of Mountain Lion?

A 2008 Mac won't have originally shipped with Lion. You need to install 10.6.8 on the computer, log into the Mac App Store with the Apple ID you used to purchase Mountain Lion, click on the Purchases tab, and download it.
(121465)

I have a large number of photos I'd like to delete from my ipad 2 however from reading previous comments it seems I have to unsync from the original source computer. I'm in another country now and don't have access to it. Is there another way?

I have a large number of photos I'd like to delete from my ipad 2 however from reading previous comments it seems I have to unsync from the original source computer. I'm in another country now and don't have access to it. Is there another way?

You should be able to do this via the iPad directly. Open the Photos application and the forward arrow, then select all of the photos you want to delete and click the red delete button.

Is annotation for a hyperlink to another video is possible from the original video?

Similar Messages

Maybe you are looking for