Is Any Body Having this Issue on there Razr or Maxx with I.C.S.!

When i go to the Web on my Maxx that i have I.C.S installed on and i do a Search by Tapping on the ( Mike ) icon it comes up and is ready for me. i say who i want it to Search for Like weatherbug.com and when it does the search it comes up Like this Weatherbug.com with the First Letter in Capital instead of Lower Case) it will show the web site for a Brief second then it will take it way and will not Let me go ahead and do the Search.
The only way it will let me Complete the Search is if i type it out my self. It should be able to do this with out the issue i Described..
On my other Maxx with Gingerbread it Works Fine when i tap the Mike and say what i want it to search for.!
I'm getting to wander if this is another I.C.S Blunder or is there a setting that i Over Looked that is Causing this
If any body has a Suggestion or Has had this same Issue happen to them on there Razr /Razr Maxx please Post: Thanks..b33

What it's doing Ann is when i do a Voice Search it is Auto Capitalizing the first Letter in the search box it doesn't matter who or what i say it's doing this and i thought maybe by getting rid of Adobe Flash that might Be the Culprit but this Baby is throwing me a Curve Ball and i Don't know what to do with it. When i'm doing a search for let's say androidcentral.com it comes up like this
Androidcentral.com <--this is in the search Box
androidcentral.com <--this is directly below the Search Box and it only stays there for a few seconds then it disappears
it does't give me time to Tap on it and use it.
I have tried Clearing the settings, i Unchecked Auto Capitalization or at least i thought i did there are so many different things you can do or try to do but it's getting the Right one. that counts all i know is i'm gonna keep trying..

Similar Messages

In my App Store showing paid apps in the chart of free apps .... Is this the software problem .? Did any body having this same issue ? Plz tell me

In my iPhone 5s in App Store showing paid apps in the column of free apps ..... Is this software issue ?

Apps are permanently tied to the account used to download them. It was behaving exactly as it should have.

HT1338 Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install. Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)" Any one else having this issue? Please help.

Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install. Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)" Any one else having this issue? Please help.

Hi there!
Yes, same problem too; I've already sent an email to apple support and just received a very vague and unpractical response with "call apple support in your country" as main advice. I've obviously emailed back stating that I need a clearer response and I don not have any intention to spend money calling for support when updates is a free tool. I do also believe this is a probem generated on Apple's end, I just wish they learned to say "sorry, it's us; working on it!"
Message was edited by: MacLuc

TS1717 keep getting "the itunes library file cannot be saved." there is not enough memory available. then itunes crashes. anyone else having this issue?

error code keeps popping up-the itunes library file cannot be saved. there is not enough memory available. then itunes crashes? anyone else having this issue?

Yes, I'm getting the same issue

For this issue Is there any solution in Standard solution or any Developmet

Hello Friends,
I have one issue that is
When ever the forecast is release from DP to PPDS (Monthly - days) of a material quantities should be bucketed into Monthly bucketed quantities and split into day level ( e.g: Product1 1st week 1000ton, 3rd week 2000ton , when it releases system aggregates the quantities and depending upon the product profile and setup time it shold give me result as product1 -3000ton in day 1 and product2 --2000ton on day 2 ...so on) .Standard SAP APO release of Monthly forecast quantity to daily bucket is divided into 30 or 31 days and split the quantities equally( e.g: Product1 1st week 1000ton, 3rd week 2000ton , when it releases system aggregates the quantities and divides in 30 days in a month and split the quantities equally).
For this issue Is there any solution in Standard SAP or any Developmet is required in APO-DP.
Pl Through me some lights on me .
Regards,
sivaram76.

Hi
If you are using u201C/SAPAPO/MC90 for releasing the FCST , I think you can define different Planning Buckets Profiles according your requirement for example according your needs for disaggregation of your FCST. A planning buckets profile contains the periodicities or a subset of the periodicities that you defined in the storage buckets profile.
Once you maintain the planning bucket profile you can put it in tab Daily Buckets Profile while releasing the FCST.
It will be nice if you please cross check it its meet you requirement.
Thanks
Amol

Just had a fatal crash of my new 1TB fusion drive on my 3 month old Imac 27". Is there anyone elese having this issue? And have you been able to recover data from that Crashed Fushion Drive?

Just had a fatal crash of my new 1TB fusion drive on my 3 month old Imac 27". Is there anyone elese having this issue? And have you been able to recover data from that Crashed Fushion Drive?

Since it's a new machine, contact Apple's Support, formerly Apple Express Lane and let them deal with it.

I have an iphone 4. Recently I have issues with certain apps closing immediately once they are open. ie Email. Tried re-booting entire thing and still having issues. Any one else having this issue or a fix for it?

I have an iphone 4. Recently I have issues with certain apps closing immediately once they are opened.(ie Email). Tried re-booting entire phone and still having issues. Any one else having this issue or know a fix for it?

Delete background Apps from memory and then Reset.
To Delete background Apps, double click Home button, in the bar at bottom, hold down on an App Icon until the minus sign appears, tap all the minus signs, until all background Apps are cleared from memory. Then Reset, hold both Home and Power buttons until the iPhone begins to restart itself, ignor the 'slide to power off' let the iPhone restart itself. Usually takes about 10 seconds of holding both buttons.

5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

I have a similar issue - my iPod nano connects and is visible in Device Manager yet invisible in My Computer and iTunes. I've tried everything I can possibly think of to try and solve this myself, all in vain.
Mine is a nano 4G. I've been using it for quite some time without the slightest problem. I have been using WINAMP instead of iTunes to manage my darling nano.
Then, one fine day I bought a new computer and the nano would not show up in My Computer, though the nano display shows "Do not disconnect". On my old computer it worked (and still works) absolutely fine with win XP as well as with win7 (the later I currently use on my new/problematic computer, which I bought last summer and that's how long I've had this problem).
Of course, after several first attempts I gave up and installed iTunes. I've tried using the Apple support article "iPod not recognized in 'My Computer' and in iTunes for Windows":
- reset
- fully charged,
- cable works fine on two other computers
- in normal or disk mode makes no difference
- tried to find anything useful in the diagnostics mode
- reinstalled iTunes several different times since then to the latest version
- I've unplugged every other USB device except for my mouse and keyboard and tried several different USB ports on my motherboard (USB 3.0 and conventional), as well as trying different USB- related options in my BIOS.
- I've never used any Mac with this ipod
- I've tried fiddling with the win7 Services by stopping and restarting them and of course
- uninstalling the iPod drivers in Device Manager. After such an uninstall the ipod would automatically be recognised and "ready for use", i.e. being invisible in My Computer.
- Attempted to find any possible third-party conflict with msconfig or the possibility that my ipod is being confused for a network drive (for which I've disconnected my HDD, leaving only my SSD with the OS).
Sometimes, iTunes would note that iPod service (or something, can't remember exactly) failed to install properly and asked to try and repair it. I would click YES! and voila - no change! The ipod would rarely show up in iTunes on my problematic computer like this:
iTunes would warn me that the nano would need restoring so I would try and do it on my haunted machine upon which iTunes would freeze like you seen in the picture.
Despite this, I've updated and restored the nano on my father's computer to the latest version without any problems. This though, did not solve my problem in any way.
I can load music to my nano through my old computer (which for me is a real pain and hassle) and the gadget works normally in terms of its disconnected functionality.
I've taken my nano to the local service for repair and they said it was fine. Mercifully, they didn't charge for the diagnostics service (gee, thanks for not ripping me off!).
Here are two screengrabs from my Device Manager
and Devices and Printers screens on my comp:
That is my sad story as far as I can remember. It's most likely something with the drivers or something along those lines though I'm out of ideas at this point.
If you think you have any idea PLEASR HELP, I'M DESPERATE!

Logic Pro X and Eleven Rack Sound Card Problem. Intermittent? MacBook Pro Yosemite. Anyone having this issue too?

Ok,
Avid Eleven Rack Audio Interface with latest firmware into usb MacBook Pro running 10.10.3 (latest Yosemite)
Logic X and the sound card do not see the Eleven Rack all the time. *Intermittently*, but more often than not, I can't select the eleven rack as my interface either in Logic X Preferences>Audio>Devices or System Preferences>sound pref as the eleven rack does not show up in either list to be able to even select it.
Real pain when you are writing and have a flow of ideas and need to get a recording down. Anyone else having this issue? I have tried both usb ports in the macbook pro and the same results.
Of course I unplug and replug the usb cable. Still nothing. I have to quit Logic Pro X and restart to even get a chance for the eleven to even show up in either list.
Once I can select it then I also have a problem with being able to record (it records and gets input not prob) but on playback their is no output (with correct output selected) so I then have to use a Logic X template where the output is set exactly the same as what I am trying currently but for some reason it works with the template on the same exact settings. Mighty pain. Any help would be greatly appreciated. I am going to try my Eleven on another computer to see what happens too but thought I would ask here.
Thanks
ejh

First make sure you are using the latest drivers...
http://avid.force.com/pkb/articles/en_US/Download/Eleven-Rack-Drivers
However the latest ones are not yet confirmed as working to OS X 10.10.3 so you may need to wait for an update from Avid....
Test and see....
Note: It's always a good idea not to update OS X or Logic Pro until after you have checked if there are working drivers for your external hardware first.. especially, in my personal opinion... in the case of Avid hardware drivers which are know to lag behind in development..

Safari (5.1.7) on Lion (10.7.4) crashes when using Trusteer Rapport? Anyone else having this issue? I notice Rapport is 32 bit unlike all else in system preferences on my MacBook Pro.

Safari 5.1.7 keeps crashing (log points to Rapport) on my Mac OS X (10.7.4) Has anyone else having this issue with Trusteer Rapport?

Hello Mr. Jelfs,
Please note that Rapport is fully compatible with Mac OS Leopard, Snow Leopard and Lion.
We operate a 24\7, free of charge support team that will gladly answer any and all your questions and queries, and would be happy to assist with any problem reported.
We can be reached either via email to [email protected] , or by browsing to http://www.trusteer.com/support/report-problem .
Regards,
The Trusteer Technical Support team.

"itunes could not restore the iphone because the password was incorrect" I know for a fact im using the correct password. and it has previously worked. is anyone else having this issue.

"itunes could not restore the iphone because the password was incorrect" I know for a fact im using the correct password. and it has previously worked. is anyone else having this issue.

Hi, I also get the message "itunes could not restore the iphone because the password was incorrect" though I am never prompted to enter a password anywhere! Nor was the backup password encrypted to begin with! Really strange, any pointers will be greatly appriciated!

Lightroom 5 file edited in photoshop cc 2014 does not appear back next to original after save. Is anyone else having this issue? If so what is the fix. The edited image appears back in lightroom in a new folder.

Lightroom 5 file edited in photoshop cc 2014 does not appear back next to original after save. Is anyone else having this issue? If so what is the fix. The edited image appears back in lightroom in a new folder.

I'm performing a normal "Save", not "Save As". Work flow I'm using is as follows: Select photo in Lightroom 5.7 >" Edit In" Photoshop CC 2014 > (after working on photo is PS) > Save > close PS. Photo returns to Lightroom 5.7 in a new folder rather than next to the original. Prior to purchasing the monthly plan and upgrading to PS CC 2014, I performed this same work flow using Lightroom 5.6 and Photoshop CS6 without any issues.
Just for fun... I attempted to move the edited file back into the original folder. I received a prompt that said the file already existed in the original folder, however I can't see it except the new folder that LR created. I tried several different sort orders, etc without any success.
*** Follow up: Was unable to resolve the issue using Photoshop CC 2014. Uninstalled PS CC 2014 and went back to using Photoshop CS6. Return trips from LR 5.7 to Photoshop is now performing as it should: returning edited photo back to the original folder in LR 5 and placing next to the original image.
Should anyone have a suggestion on getting Photoshop CC 2014 to do the same, I would love to be educated.
Thanks for the help, dj_paige.

Using Firefox, I can login and browse my financial institution (NFCU) but I cannot pay bills. When I click the bill pay tab, the tab loads 66% and then hangs. Has anyone else reported having this issue?

Using Firefox, I can login and browse my financial institution website (NFCU) but I cannot pay bills. When I click the bill pay tab, the tab loads about 66% and then hangs (loading). I have let it load until NFCU asks me if I want to cancel the session, a much to long of a load time. Has anyone else reported having this issue with NFCU or Mozilla Firefox 3.6.18?
I have also posed the question to NFCU, currently awaiting response and will share what was given.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Send Invitation Inactive/Not Working in Member Center. Anyone else having this issue?

When I try to invite a developer to our organization's Apple Dev Portal, the 'Send Invitation' link is inactive. I also tried the bulk invite where the button appears to be active but does not respond when clicked. Is anyone else having this issue? I submitted a bug report last week and haven't heard anything.

Hi 2themax11
Still no update from PA Networks - it is like they are in total denial that Mountain Lion exists!
The Cisco app works but only just and is very slow, i think that may be more to do with us than the use of the app. Bear in mind we used to use the Cisco service and so it is not something I had to set up from scratch but it is not something our network team are happy about as this service was buried and was not supposed to be supported any more.
I am also using a Cisco SSL webvpn for accessing our intranet etc. it is a quicker fix for a few things. Like you I am now using 2 laptops...one is an old Dell...it is horrible!

Hi any body having configuration material on Generic with holding tax

Hi SAP Guru's
Any body having configuration material on Generic with holding tax
Please help me on this because presently i am working UK porject when i am executing transaction code S_P00_07000134 getting no list genarated
Please give me some inputs
Regards,
satya

Hello abhijeeth,
Sent!! chk u r mail for the notes.
Regrads,
shashikanth,
Asssign points for usefull answer.

Is Any Body Having this Issue on there Razr or Maxx with I.C.S.!

Similar Messages

Maybe you are looking for