Is any one familiar with Data Backup by Prosoft?
Hi! Just me again. I wonder if anyone out there is familiar with Data Backup by Prosoft? It's a backup (obviously) programme for Mac OSX. I came across it today while surfing through the software section of Amazon's website.
Hi, yes I am using Data Backup to backup multiple servers onto an Xraid. What do you want to know about it?
Cheers,
Tim
Similar Messages
-
Any one familiar with using Motif Racks Studio Manager program with Logic
I’ve had my Motif Rack(1st Mo rack) for over a year now. I recently downloaded and installed the midi driver, Studio manager v2.3.1 and the Motif Rack 2 editors on my Imac to be able to control my rack while in Logic. When I start Studio Manager and go to add the editor modules I get the following error: "Following components could not be loaded. Please ensure that you have installed required components correctly. It then identifies the two Motif Rack editors.I checked threads on this issue and found some one with the same problem but his issue was never resolved. Hope this is the right spot to post this. Thanks in advance.
The system does that because Yamaha was smart enough to release a universal binary that doesn't work on Intel CPUs. If they'd just recompile Studio Manager without support for the x86 architecture, the issue would fix itself. Apparently they think it's better to have frustrated and confused users scouring the internet for an obscure solution to a problem that Yamaha could fix in 15 minutes.
-
Can any one share with me any two critical issues in DP support project
Hello friends,
I am new to DP support project in SCM5.0 version,can any one share with me my queries
1.what is my support rolles and responsiblities .in DP
2.can any one share with me any two critical issues in DP and how can you resole itHi Sivaram,
1. As a DP functional consultant you need to resolve all the incidents raised in APO DP module( Forecasting, lifecycle planning, master data in APO DP, Planning books, macros , release to APO SNP or R/3 or other systems, CVC maintenance etc) which will also include BW part of SCM -APO related to DP, like data extraction and back up into and from infocubes. You will also support all the interfaces realted to APO DP , for the APO related part of the interface.
You need to reoslve these incidents in the time frames defined by SLAs for the support project.
You will have to also carry out problem management of some of the critical incidents so that incidents do not re-occur.
Further you will have to support Release /Change managment support( if it is part of your contract of Support project).
This willl involve testing changes in quality system, before these are moved to production system.
2 I found 2 crtical issues in APO DP support as below:
2.1 Sales history extraction data interafces from BW system used to have problems : technical problems of interface / jobs in BW running late, functional problems: sales history extract in BW not correct because various reasons
This used to lead to delayed job runs in APO and finally delayed forecasting and ptehr DP processes .
By proactive monitoring by BW team and taking appropriate actions for master data issues, this issue occurance frequency was reduced , but not completely eliminated.
2.2 Another major issue was related to back up process of APO DP planning data into infocubes. Finally by splitting the jobs as per daily, weekly and monthly bakc up procedure , we were able to resolve the issue.
I hope I have answered your queries.
Pleasse check and confirm.
Regards
Datta -
I have one problem with Data Guard. My archive log files are not applied.
I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap -
I have an amazing number of duplicates - not photo - but other. How can I get rid of them? Virtually all kinds if data is duplicated often 20- to 50 times. The duplicates are bot restricted to any one kind of data.
https://discussions.apple.com/message/25888564#25888564
-
Hi experts,could any one explain with an example of images
hi SAP experts,could any one explain with an example of images Reverse image,update image,Delete image and Add image.
Hi,
Go thru below thread it has already discussed
Re: selection from scratch: full VS (intialize delta + delta) update bi 7.0
Assign points if it helps you
thanks -
Has any one worked with PooledPreparedStatement in apache dbcp package ?
Has any one worked with PooledPreparedStatement in apache dbcp package ?
Is there a sample ? Can you share the code
RaeesHi Rahul,
I am not an expert in this matter, but i think i can share some info.
SAP Fiori uses a very different development approach using SAPUI5 (HTML5/Javascript/CSS etc).
I really don't know if there is a way to migrate WDA with your intent, it seems more like a redesign of your applications using the SAPUI5 resources, which can result in a reasonable amount of effort, depending on your WD applications quantity, complexity, size and other several factors.
It has to be sized very carefully, and the new designs must be based on a solid software modelling that suits and leverages the advantages of the SAPUI5 framework.
There is much content to venture into, you can search for SAPUI5 tutorials/info, or add it with Fiori.
Here is an example of interesting content from last year:
What SAPUI5 and Fiori tells us about the future of UI development skills
Hope it helps you, i am also studying these topics, please feel free to correct my mistakes.
Regards,
Renan -
iPhone 4 won't slide to unlock . I tried everything possible and even got my phone replaced fora new one costing me 10,282 Rupees . The new phone is again having the same problem even without adding any apps or taking data backup
Yeah, first my thought was also that... that's why I've gone to Apple and they already switched the phone twice!!!
Last time was yesterday... I posted this here because I came from Apple and with a new iPhone 5, although I didn't restore anything from iCloud, I hadn't even logged in to iCloud / AppStore, and without any event on the lockscreen my iPhone 5 was already "locked" on the unlock screen... after a mere 45m after I used it without a single App!! Just a couple of SMS / 1 or 2 calls... I'm going to Apple again on monday, but tried to post here to see if this has happened before to anyone with 3 new iPhones!!! -
Any one that can help me with this problem?
I have tried to switch sim card with another iPhone - my simcard works perfect on the other iPhone.
Re installed the software
Tested voice memos - seems OK
Homebutton - then loudness + /-
HELP-same problem started today. very frustrated that i have a 400 paperweight. i can hear them but they cant hear me either... trying to restore phone now.... ANGRY!!! if you have a fix someone pass it along.
-
Any one worked with SAP Fiori Or Personas
Hi Experts
Can you please let me know if any one of you have used SAP Fiori or Personas.
I have a ABAP Webdynpro application and Client has a question if we can migrate similar things to Fiori or Personas.
More intrested for Fiori as it can be used via mobiles as well.
Thanks in Advance
Rahul
Tags edited by: Michael ApplebyHi Rahul,
I am not an expert in this matter, but i think i can share some info.
SAP Fiori uses a very different development approach using SAPUI5 (HTML5/Javascript/CSS etc).
I really don't know if there is a way to migrate WDA with your intent, it seems more like a redesign of your applications using the SAPUI5 resources, which can result in a reasonable amount of effort, depending on your WD applications quantity, complexity, size and other several factors.
It has to be sized very carefully, and the new designs must be based on a solid software modelling that suits and leverages the advantages of the SAPUI5 framework.
There is much content to venture into, you can search for SAPUI5 tutorials/info, or add it with Fiori.
Here is an example of interesting content from last year:
What SAPUI5 and Fiori tells us about the future of UI development skills
Hope it helps you, i am also studying these topics, please feel free to correct my mistakes.
Regards,
Renan -
Can Any one helpme with logic for fortnight
Hi All,
I need the logic for Fortnight of the year for drill in reports . Can any one help me regarding this.
Thanks in AdvanceHi,
I have built this logic to display the fortnights of current month plz modify this according to you requirmenet.
Here is the query....
SELECT case when getdate() between DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0)
and
dateadd(dd,14,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0) ) then 'Fnight-1' else 'Fnight-2' end
Cheers,
Ravichandra K -
Is any one familiyer with this error
Deployment failed: Nested exception
Resolution:
Base Exception:
java.rmi.RemoteException
deploy failed!: ; nested exception is:
oracle.oc4j.admin.internal.DeployerException: Error initializing ejb-module; Exception Error loading class 'com.framework.handlers.tasks.failrecovery.FailRecoveryTask': java.lang.ExceptionInInitializerError. deploy failed!: ; nested exception is:
oracle.oc4j.admin.internal.DeployerException: Error initializing ejb-module; Exception Error loading class 'com.framework.handlers.tasks.failrecovery.FailRecoveryTask': java.lang.ExceptionInInitializerError
ples help me to resolve this error
Thanks
Asanka Priyanjith
Message was edited by:
Asanka PriyanjithHi, yes I am using Data Backup to backup multiple servers onto an Xraid. What do you want to know about it?
Cheers,
Tim -
Table - populate one table with data from the list of another table
Hello All,
I am a newbie in Swing and am a book and few tutorials old.
I am trying to achieve the following:
(1) I populate Table1 (a JTable) with a list of data - each row consists of several columns. And I have a Table2 (also JTable) that is in the beginning empty.
Both the tables (Table1 and Table2) are showed in the window.
(2) Lets say, there's a button (JButton) in between the two tables.
Now if I Select a row from Table1 and press the button, this row will be sent/copied to Table2.
And this way I can choose different rows and pass the data to Table2.
I have manages to make Table1 and put data in it ... but for the rest, I don't know where and how to begin.
Would appreciate some ideas and tips.
Thank you.Since you are using a button to start the copy process you don't need to worry about a ListSelectionListener or a MouseListener. You need to create a button with an ActionListener that does the following:
a) Create an Array based on the size of the number of columns in the table
b) get the index of the selected row
c) populate the Array with data from the TableModel by using the table.getModel().getValueAt(...) method for each
d) Now you can add the row of data to the other JTable by updating its model.
DefaultTableModel model2 = (DefaultTableModel)table2.getMode();
model.addRow( theArray ); -
Can any one help with new iOS 7.1 update?
Hello,
I have recently downloaded the iOS 7.1 update and it has being causing problems with the iPhone 4s. The problems are as follows;
No Wi-Fi connection all, and in full range of a connection (If and when I connect its for 10 seconds and gone again)
Battery Life depleting quickly
iPhone freezes constantly
iPhone getting extremely hot when not in use.
Is there anything that I can do that can help with this or will I have to wait for the next iOS update?
KieranIf I restore as new without the backup & everything seems to be fine, I assume I would then have to restore it from my latest backup in iTunes in order to get all (or at least most) of my data back.
From what I have read, it looks like at least the music I have on my iPhone 4S that I put there from a CD I own would not be in my backup. That is not a major problem, since it is only 1 CD.
It also seems like the iTunes backup is more complete than the iCloud backup (I do have both).
So, I should probably be restoring from that backup.
Is there anything else that is not backed up in an iTunes backup that I should consider before I do that?
When I backup in iTunes (or even in iCloud), some items not backed up?
Wouldn't I then have to re-install those items that are not in my backups?
I have a Medical app from my local ambulance operator where I have taken a ton of time to input all of my medical information going back numerous years. I just got tired of some medical person constantly asking me for information one never really makes a point of remembering. Now, I have all of that information in my iPhone 4S.
There is no way I would want to reinstall that app & re-input all of that information again.
I also put a lot of "lists" in the Notes area on my iPhone 4S.
I understand that is also something that is not backed up.
These are just 2 examples.
I also have other items that I am under the impression also are not backed up.
Losing any of that information would be a huge burden to recover.
I am willing to take a chance with some items that are not backed up to either iTunes nor iCloud.
But, knowlingly doing something that may lose that information is not something I am willing to do.
OR, am I just not understanding what is and is not backed up in iTunes or iCloud & what I could potentially lose? -
Can any one help with poor LTE connection with new iPad?
I wrote yesterday about my new iPad 4g LTE. I have it in Verizon and I am using it from home which is only 3G Verizon coverage. Often, ( like every minute), it will lose all ability to use the cellular connection. I will then have to wait for about another minute for the service to come back. Is this a Verizon issue or the iPad itself?
Also, went thru a 4g area while on the interstate and would completely lose connection around corners, etc. can the iPad not use 3G towers and 4g towers back and forth? Really upset about this! Anyone else having this issue? Help!If I restore as new without the backup & everything seems to be fine, I assume I would then have to restore it from my latest backup in iTunes in order to get all (or at least most) of my data back.
From what I have read, it looks like at least the music I have on my iPhone 4S that I put there from a CD I own would not be in my backup. That is not a major problem, since it is only 1 CD.
It also seems like the iTunes backup is more complete than the iCloud backup (I do have both).
So, I should probably be restoring from that backup.
Is there anything else that is not backed up in an iTunes backup that I should consider before I do that?
When I backup in iTunes (or even in iCloud), some items not backed up?
Wouldn't I then have to re-install those items that are not in my backups?
I have a Medical app from my local ambulance operator where I have taken a ton of time to input all of my medical information going back numerous years. I just got tired of some medical person constantly asking me for information one never really makes a point of remembering. Now, I have all of that information in my iPhone 4S.
There is no way I would want to reinstall that app & re-input all of that information again.
I also put a lot of "lists" in the Notes area on my iPhone 4S.
I understand that is also something that is not backed up.
These are just 2 examples.
I also have other items that I am under the impression also are not backed up.
Losing any of that information would be a huge burden to recover.
I am willing to take a chance with some items that are not backed up to either iTunes nor iCloud.
But, knowlingly doing something that may lose that information is not something I am willing to do.
OR, am I just not understanding what is and is not backed up in iTunes or iCloud & what I could potentially lose?
Maybe you are looking for
-
Linking customer invoice to gl account
hi guru, could u pls assist me on how to link a particular customers invoices to a specific gl account. this should happen each time an invoice is raised for that customer. Again, how can i create FOC (free of charge) invoices for these customers? pl
-
Implementing Security through forms/Reports
Hi I have an application Developed in Forms.I have set of End users, who connect thru this application . I want to protect them from connecting to database apart from this application. ie. Thry should not access data thru SQLPLUS(Client), XLS (using
-
BPC 7.5 Formula Dimension Processing Error
Hello We have upgraded from 70-7.5 and when I do a Process of one of our dimensions i get the following error:- - [DATASOURCE].[#Y_YROVERYR] Parser: The following syntax error occurred during parsing: Invalid token, Line 1, Offset 92, [TOTWITHA. Th
-
Hi Experts, We are running APO DP process chain with parallel processing in our company, we are experiencing some issues regarding run time of process chain, need your help on below points; - What are the ways we can optimize process chain run time.
-
I have noticed that my right arrow key will not work. I tried cleaning it out-nothing happened. The rest of the arrow keys work, but the right one does nothing...I have updated the normal stuff- but this has been going on for a while. Any thoughts? T