Is anybody else getting external MIDI clock tempo issues using Logic Pro 9 and OSX Lion 10.7.5?

I am having really serious tempo issues when sending midi clock to any external device - The tempo wavers and alternates around 5 bpm above and below the tempo set, and to be frank is totally unuasable when trying to clock arps from hardware synths.
I have the problem both with Logic and Ableton LE, as well as through both my MOTU Ultralite and Focusrite Liquid Sapphire 56 interfaces. I am therefore presuming this is a MIDI issue with the actual computer (MacBook pro, bought new last september).
I moved to Mac from PC, so I'm not totally up to scratch with the Mac architecture yet - can anybody shed any light on why this is happening? It's driving me mad!

Pancenter,
Yes.. I do see the occasional minor variations much like yourself when I sync up to my Oasys or more usually the Motif... to a fair sized and complicated project,,. Maybe +/- 1.. or on rare occasions +/- 2 bpm... but nothing close to the OP's +/- 5 bpm experiences...
It actually got better for me when I installed 10.8.x... along with the newest Motu drivers.. and in fact I can't remember the last time I had any unworkable issues with syncing though admittedly I haven't done that much syncing recently.
I do have a project coming up in the next 10 days.. that will require me to use the Oasys synced to Logic so I'll make a note of any issues i have and post back if any occur.
As an aside, I have recently been doing a lot of work with iPad Instruments and Arp Apps and Logic... and the sync as been rock solid over USB...

Similar Messages

MBP Display flicks off while using Logic Pro and external monitor

Hi there
I have the MBP conected to my external 19" monitor. While running Logic Pro 7.2 the MBP will, for no apparent reason, turn its diplay off and logic will crash. The external monitor will still be on. And I can still move the mouse onto this monitor.
I then have to hold down the start button to force the machine to restart. This only started to happen after 3 months, but now it happens twice a week or so.
Anyone else experiencing similar problems?
Mbp Mac OS X (10.4.6)

You may want to check these threads to see if they match your problem
http://discussions.apple.com/thread.jspa?threadID=570540
http://discussions.apple.com/thread.jspa?threadID=539425
http://discussions.apple.com/thread.jspa?threadID=546601
Reverting to 10.4.6 solved my issues.

Can Logic Pro X slave to an external midi clock, i.e. a Roland guitar synth?

I play with someone who has a Roland guitar synth with a midi clock on it. I can wirelessly sync Arturia Spark drum software but would really like to be able to sync logic. The Roland will not sync to an external device, so I need to get Logic to follow the midi clock on the Roland. Any help would be appreciated.

Unfortunately, there is no help, Logic will not sync to external MIDI clock.
MIDI TimeCode, yes. MIDI Clock.. no.
You might look at Reaper for the Mac, not sure if they've implemented MIDI Slave sync.
You understand the problem, MIDI is Low Res, when a MIDI/Audio sequencer tries to slave to MIDI Clock, the resolution is so low there are inconsistencies... MIDI is serial information and it's very easy for delays and loose sync... MIDI and Audio falls apart. When a MIDI Midi/Audio sequencer is the master it uses the audio clock which is usually at 44.1 or 48kHz samples per second (time related), compared to 24 PPG the base MIDI resolution which is tempo related.
No contest.

I am unable to get dragging guides from rulers when using CS6 InDesign. Is anybody else getting this problem?

I am unable to get dragging guides from rulers when using CS6 InDesign. Is anybody else getting this problem?

Try restoring your InDesign preferences:
Trash, Replace, Reset, or Restore the application Preferences

For the second dime in a yearish,following update download my computer crashed.after installing maverick four times got a semi working computer but my backup disc is trashed and working files seem lost.anybody else get this problem or is it selective?gerr

for the second time in a yearish,following download my computer crashed and burned.four attempts to reinstall maverick resulted in a semi-working computer but my back up disc trashed and working files seem lost.Anybody else get this problem and how regularly or is it a selective event?
gerry

It is not safe to publish your email address in an open forum, so I've asked the hosts to remove them. Your post is here for anyone to see and if someone has a solution, they will post an answer, so there is no need for an email address.

I am trying to use logic pro 9 on my lion system and it continues to say I have a bad midi...when i go to check my midi drivers folders in my library its empty...does anyone know whats going on?

i am trying to use logic pro 9 on my lion system and it continues to say I have a bad midi...when i go to check my midi drivers folders in my library its empty...does anyone know whats going on?

I
got your message about making sure to use the machine specific disk that came with my machine. Unfortunately, Apple no longer sells Tiger replacement disks. I've got a couple of bids out on ebay, and will update when I have news to add to this post.
Thank you for your help, Frank!
To be clear you called the 800 number and explained what the situation was, old machine and lost the original DVD's?
Just checking because if you just called and tried to buy the DVD's they might tell you they no longer sell them but you aren't really trying to buy them your trying to replace the ones that are missing.
Ebay may work but there is a certain specificity to the DVD's required which, even if they seem right, might not work.
Good luck either way. If you get a chance when you get the DVD's I'd be interested in hearing how it all works out.
regards

Keep getting message pop up "Error reading/writing file "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

Logic froze while I was working on something so I forced quit. Now every time I open LOGIC a message pops up that says:
"Error reading/writing file
“com.apple.logic.pro.cs”:
Logical end-of-file reached during read operation."
The only button option is cancel so I press it and another message appears that says:
"The Preferences are not loaded completely.
Do not save them, as you would overwrite the Preferences file with incomplete data."
Then when i close logic a box appears saying:
"The Preferences are not loaded completely.
Save them to "com.apple.logic.pro.cs" anyway?"
There are 3 button options to press; ok, cancel or dont save.
I press "don’t save" cuz I don't want to ruin anything.
I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem. If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done? I have hundreds pieces of music files I've created. I'm scared to mess anything up with all the hours and months of work I've done. Is there anyway to fix this without loosing anything? I'm using Logic Pro 8.
Thank you

You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

Hello! Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

Hi
Given that your answer to 1. is 'pre-installed' and 3. is 'No', I think the only thing to do is to take it to an Apple store (ideally the one you bought it from) and have them reinstall it for you.
The intended solution in cases like yours is that you should be able to reboot and install even a wiped disk by using Apple's servers over the internet (you do this by restarting with 'command-r' and choosing 'reinstall Lion'). However if this isn't working for you then you need to get the store to do it. Don't let them fob you off with 'go home and try again'. Have them do it in the shop (you're still covered by Applecare warranty so it should cost you nothing save the inconvenience of the trip and possibly leaving the machine there while they fix it).
A reinstall should leave all your own personal data and programs in place.
Note for future: when you get it fixed, first thing to do is buy a cheap external drive and start keeping a backup (either Time Machine or clone with Carbon Copy Cloner).
Message was edited by: softwater

HT201250 My 10.7.3 Time Machine won't work with external disks. Worked fine with Snow Leopard, and even Lion 10.7.1

My 10.7.3 Time Machine won't work with external disks. Worked fine with Snow Leopard, and even Lion 10.7.1
I have tried everything, even buy new external disk from different manufacture.
If I cant get a fix soon, I am downgrading back to SnowL.

Still no luck. I tried all the tricks, reconfiguring TM (remove selected disk option, and re-setting it, and trying different disks). Tried new combo updater, and the newer TM update after that. Tired two different disks too (one is my older firewire WD MyBook 1TB, and my brand new 3tb Seagate GoFlex USB... either one plugged into back of computer - no intermediary devices). I did get the TM buddy wiget and it produced the following log, from the last attempt, where I setup lots of exclusions so that backup quantity was small (under 10gb). Still it failed to complete. Here is that log, for what it is worth:
Starting standard backup
Backing up to: /Volumes/TM-Disk/Backups.backupdb
9.56 GB required (including padding), 911.15 GB available
Waiting for index to be ready (101)
Copied 0 files (0 bytes) from volume Mac HD.
Backup canceled.
To prove a point, I will take these disks are run them on my other Tiger and Snow Leopard laptops to prove TM works fine on those with these disks. But I fear the only options are to either have my tech re-install LION... or just have him reinstall SL instead. Im at wits end.

I have purchased Wedding Style By Miracle Design - it is showing in the downloads but I can not get it into lightroom - I am using a mac and the instructions are for windows.

I have purchased Wedding Style By Miracle Design - it is showing in the downloads but I can not get it into lightroom - I am using a mac and the instructions are for windows.

Return, cancel, or exchange an Adobe order

How can i copy files from one external hard disk to another using macbook pro with retina display

How can i copy files from one external hard drive to another using macbook pro with retina display?

That's odd - if you open Disk Utility (Applications->Utilities) and select the disk(s), how are they formatted? If you're only going to be used with your Mac, they should be formatted as "Mac OS Extended (Journaled)".
Clinton

I have a long-existing iPhone 4s with one apple id and started a job where I received a macbook with another apple id. how do i get my phone to sync with the Mac Pro and secondly how do i get my music on there?

i have a long-existing iPhone 4s with one apple id and started a job where I received a macbook with another apple id. how do i get my phone to sync with the Mac Pro and secondly how do i get my music on there?

No not bothered about sycing apps etc it is all about calendars and maybe notes. IN terms of how its done I just want it the easiest way and preferably so that if an entry is made on one calendar then it populates the other.
Thgius is beacuse I have my work diary on outlok, which I then link with my ical. I want to make sure that information is then shared with her.
Chris

I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac

I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?

Mixing files with data is not always great idea.
See info here.
Q3 http://pondini.org/TM/Time_Capsule.html
Why not just connect the PC directly to the TC by ethernet and copy the files over?
It is hugely faster and much less mucking around.
In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
There is more info here.
http://support.apple.com/kb/HT1331

I have a Windows 7 laptop using I tunes 64 and all my music files are on an external disc. I rarely use I tunes and at one point moved all my files (including the music files) from one external disc to another without considering what affect this wou

I have a Windows 7 laptop using I tunes 64 and all my music files are
on an external disc. I rarely use I tunes and at one point moved all my files
(including the music files) from one external disc to another without
considering what affect this would have on the I tunes library. When I eventually
attempted to use I tunes, every selected a song from the library resulted in a
message stating that the file couldn't be located. After following some of the procedures
explained in this community I was able to reconnect the library back to where
the associated music files are presently stored. However, there are still 2
problems that need to be corrected. 1) Every song file now has a duplicate. One
file works and the other file will result in the same message stating that the
file couldn't be located. Before there were 4,000 songs in the library, now
there are 8,000 songs. I need to eliminate the 4,000 dead song files. 2) All
the playlists are still associated with the dead song files which makes the
playlists unusable. Can the playlists be reconnected to the usable files
without manually having to recreate them? Thanks in advance for the help.
sdkr

So am I understanding correctly?
You used your iPod as a hard drive (drag and drop) instead of having iTunes install the music?
If you used drag and drop your choices are different than if you used iTunes to transfer.
Good luck!

Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos.

Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos. I wanted to see if I could view them from the hard drive. Thanks

Hello, eco1.
Thank you for visiting Apple Support Communities.
This sounds like you are wanting to move your iTunes media folder to an external drive and have iTunes this folder from this location. If this is the case then I would recommend taking a look at the article below.
iTunes for Mac: Moving your iTunes Media folder
http://support.apple.com/kb/ht1449
Cheers,
Jason H.

Is anybody else getting external MIDI clock tempo issues using Logic Pro 9 and OSX Lion 10.7.5?

Similar Messages

Maybe you are looking for