Is anybody out there who knows the steps to set up Logic Express? with an Alesis iO|26 interface

Is anybody out there who knows the steps to set up Logic Express 9 (scores) with an Alesis iO|26 interface to input notes by playing
an electric guitar? Thank you for your time and patience.
W.W.

And i fount this
PETERSON SONUUS-G2M MIDI-KONVERTER
ok this one could sendout your guitar sound as a MIDI data but only monophone.
Thats what i see as a big computation problem ( when you play your simple C7 there are
at least 10 important parameter that describe your C7 chord; but if you play monophone
theese small boxes can convert it).
Have you tried anny MIDI guitar?
I saw some "usb" guitars transmiting midi signal into
software synth on some computer.
http://www.roland.com/products/en/GI-20/
This one?

Similar Messages

Is anybody out there who knows about titles in Adobe elements

I have nothing but problems with the titles into Adobe elements Souris anybody out there can help me?

danielo
Thanks for the reply. Let us try the Crop way with keyframing described in another way.....
1. Are you OK with creating the 4 lines of text in the opened Titler and closing the Titler to have the created title on the Timeline?
(This is 4 lines created by typing continuously the 4 lines rather than creating 4 separate lines of text.)
2. After the Titler is closed, you want to apply the Crop effect to the Timeline title (open fx Effects Tab, go to Transform/Crop, and drag the thumbnail for
Crop into the Timeline title).
3. Now we are going to edit the Crop effect that was just applied. For that, click on the title on the Timeline to selected/highlighted, and go to
Applied Effects Tab/Applied Effects Palette/Crop Panel expanded.
At this point, you should see
Your next objective is to move the Bottom slider in the Crop Panel expanded to establish what you see on screen across
the duration of the title. We need to use the technique of keyframing to do that. If we did not and just set the Crop's
Bottom slider to hide the last three lines, we would just see the first line across the video duration and never see
the last three line. It would look like
Are you OK so far with what needs to be done. If so, I will go through keyframing of the Crop effect.
Keyframing
Refer back to the first screenshot
1. Use the -+ slider above the Timeline to expand the Timeline to get a better look at its content (the title).
Right click the title to which the Crop effect has been applied. Select Show Clip Keyframes/Crop and Bottom.
Now every time you create a keyframe (to reveal another line) where you have placed the Timeline Indicator, you will see a white dot on the orange band that
runs through the title clip
2. In the Crop Panel expanded, focus on the "Bottom" slider. Move that "Bottom" slider to the right, hiding the last 3 lines of text.
Have the Timeline Indicator at the start of the Timeline.
Click on the Toggle Animation icon in the Crop Panel expanded area as point out in post 8 screenshot.
3. Move the Timeline Indicator to the right to an envisioned 25% mark along the clip, move the "Bottom" slider to the left to reveal
the second line of text. You will see a white dot (keyframe) automatically placed on the Timeline orange band at that 25% point.
4. Move the Timeline Indicator to the right to an envisioned 50% mark along the clip, move the "Bottom" slider to the left to reveal
the third line of text. You will see a white dot (keyframe) automatically placed at that Timeline 50% point.
5. Move the Timeline Indicator to the right to an envisioned 75% mark along the clip, move the "Bottom" slide to the left to reveal
the fourth line of text. You will see a white dot (keyframe) automatically placed at that Timeline 75% point.
After you press the Render button above the Timeline, what does that look like when played back in the Edit area monitor?
These keyframes are adjustable.
Please review and consider and then let me know if you are OK with this version. If not, please let me know where I need
to clarify or re-write.
Thanks.
ATR

Hi there! yesterday I installed Mavericks on my Macbook. Since then, it doesn't mount my external hard disk drive anymore, which he did a week ago (without the update). Is there anyone out there who knows a solution?

Hi there! Yesterday, I installed Mavericks on my Macbook. Since then, it doesn't recognize my external hard disk drive anymore (at least not on the desktop. In Germany they call it "it doens't mount it". I don't know if it's the same expression in english?)
I just used it a week ago, before I did the update and it worked perfectly fine.
Is there anyone out there who knows a solution for this problem? I've been googleing for hours now and can't find any answer.
Thank you!!!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Is there anybody out there who is still using Appleworks Database and is there a good alternative?

Is there anybody else out there who is still using Appleworks Database and is there a good alternative?

There is no replacement program that will directly read Appleworks database files.
You have two options:
1. Continue to use Appleworks 6.2.9, which requires Rosetta installed in Snow Leopard, or the access to Rosetta by installing Snow Leopard Server in virtualization for use in Lion, Mt. Lion or Mavericks:
[click on image to enlarge]
2. Export your database information into a common export function (such as delimited ASCII text file) and build a new database file in an alternate database program (such as Filemaker Pro) and import your information into it. More information here:
http://www.wilmut.webspace.virginmedia.com/notes/aw/page5.html

There has to be someone out there that knows the a...

I've been researching threads from as far back as 2005 and apparently this problem has been going on unsolved for some time. When some phones (mine is an N96, but i've read all different Nokia models experiencing the same problem) are either reset or upgraded (in my case it was a reset) they develop the problem of not being able to download jar files. The file will look like it's loading but only makes it to about 3/4's of the way before a "cannot install this file" message appears. It takes about 15 to 20 seconds before the loading bar disappears and the message appears, but during the wait, the phone is crippled. Resetting the phone with soft or hard reset does nothing to solve the problem, I even tried the 3 finger reset and nada! Possibly, some file or files that allows the unit to download the jar files is missing, because of the reset. It has nothing at all to do with the files to be downloaded.It is in the phone. Someone out there has got to know if there is a file or whatever that can be reinstalled into the phone to reestablish jar file downloads again! There has to be a tech out there that knows exactly what files are responsible for giving Nokia phones the ability to download jar files.       JL2

No prob. Ok! This is the answer that Nokia technical sent me. I just want to say that this is bull*h*t, because before I reset my phone I downloaded and used Jar only downloads. Trapster is one I lost. Also if you go on line you will read many people with s60 models experiencing the same thing . Anyway, here it is.                                 [ I understand that you are unable to install .jar files on your Nokia N96 phone.
Rick, we manufacture different phones with different platform. Our earlier phones were S40 (Series 40) phone. Those phoneS supported .jar files or applications.
However, our smart phones S60 (Series 60) such as your Nokia N96 phone are compatible with .sis files or application. Due to the robustness, and compression capability of .sis format for S60 platform, we have no plans to revert to the old .jar platform for S60 phones.
Sis format allows us to add a wide range of features that are not available in the S40 .jar platform.
I hope this information helps clarify any misconception.]       I GUESS I'LL NEVER FIND THE ANSWER!!

Are there any geniuses out there who know airport problems?

I have an SBC 2wire dsl modem hooked to a PC by cable and a mac with airport in my room. The Mac does not see the 2wire. Airport works because I have picked up neighbors' wireless signals (syslink) and the 2 wire works because a neighbor came over with his pc and it picked up the signal. I spent 3 hours with SBC experts and did everything they could think of with no luck. Is there a solution to this?

Have a look at this site I think you will find the answers to your set up questions in it.
http://www.2wire.com/?p=8
Good Luck Don

I question for the people's out there who have the silicone case for the Micro, aka Rhino Sk

I have the silicone case too, aka Rhino skin.
what i was wondering, do you us the black belt clip that comes with it's
the reason i ask is because i used it once just to try it out. it seems like when ever you press down on it so you can clip it to your side, It's like it is putting to much pressure on the micro battery cover. what do you think? do you use you belt clip that came with your silicone case?
also i ended up with some fresh scratches.
do you use your belt clip that came with your rhino case?

Umm, well, I have a silicone case, but it didn't come with a belt clip, unless your talking about the hardcase that came with the micro.
If that's what your'e reffering to, no, I don't do that. I tried putting it in after it was in the silicone case, but once I saw that it didn't fit in directly and that I would have to add pressure, I didn't bother. I keep my Zen Micro in the silicone case, and then I put them in an altoids box. I have some soft cusion thingy on the inside of the lid so that my screen won't scrath, and I drilled a hole on the side of the altoids case for headphone/usb jack.

Is there nobody out there who know something about this problem?

Is it necessarily that i define my Prepared Statements new after I created a new view.
The error is "NUllPointerException". Seem as my Statements aren't there anymore.
Is there a better solution to solve this problem?
Tx Dash

Basically the PreparedStatement needs only to be updated if the underlying views/tables on the statement change. Well actually not the PreparedStatement but the SQL "source" for the statement.
A NullPointerException could indicate that some information that was previously retrieved (before changing the underlying view) is not longer available, but without any code nobody will be able to answer this question.
Thomas

Steps to set up my domain with Apache

Hello,
I would like to know the steps to set up my domain with Apache including the use of DNS Services. I have DNS services (http://www.dnsexit.com) . I just don't know where to begin with it adding my domain. I've already went to my preferences>>sharing>> web sharing and turned it on. My domain host is netfirms. I have an actiontec model- m1424-wr router and I have a verizon fios wireless connection that's always on. I've been doing my research on this. I'm just stuck on this part. However is it true that php/mysql is pre-installed on Mac osx 10.6? I hope I can get help. Thank you in advance.

Your description is somewhat incomplete. I assume that dnsexit.com provides dynamic DNS and that you registered a domain name with NetFirms (you say "domain host", but I presume that you just registered the domain name and they aren't actually hosting it; hosting means that your web site is on their computers instead of yours). I'll also assume that you mean that you intend to run a web server on your Mac through your FiOS connection (not a great idea, and potentially a violation of FiOS' terms of service unless you bought their commercial plan).
If all of those assumptions are correct, you need to:
1. Contact NetFirms and tell them to point your domain to DNSExit's name servers: ns1.dnsExit.com and ns2.dnsExit.com and ns3.dnsExit.com and ns4.dnsExit.com
2. After step 1 is complete, you need to install a dynamic DNS update client on a computer in your network that will always be on (DNSExit has them and installation and set-up instructions). These programs will periodically check the IP address of your network and, if it changes, will update the record at DNSExit so that sites can find it. Note that you are using FiOS so the IP address of your router is expected to change periodically; this works around that. Your router has 2 IP addresses: the WAN is the IP address exposed to the world through your FiOS connect, and the LAN, which is an address local to your home network.
3. Login to your ActionTEC router as the adminsitrator. You can do this through your web browser. The LAN IP address of the router is the gateway address indicated in the Network preference pane for your ethernet connection. The modem documentation tells you the default password for the router (make sure to change it).
Perform the following tasks on the router (though the advanced options, you'll want to poke around to find them):
a. check the DHCP address ranges (usually it says that it will give out IP addresses from 192.168.1.100-192.168.1.200 or similar). Note it down. You're going to want to give the computer that acts as the web server a static IP address outside that range.
b. Choose an address outside the DHCP range that isn't already in use and write it down. This will be the static IP addres you will set on your web server.
c. Locate the Firewall/NAT settings on the router and add a rule to forward traffic on ports 80 and 443 to the IP address you had chosen.
4. On the computer that will be the web server, start web-sharing.
5. Go to the network preferences and configure the static IP address that you selected. Use the same gateways and DNS settings that were assigned by DHCP.
... and that's it. If you performed all those steps properly, requests to your domain will be sent to your FiOS modem and forwarded on to the designated computer for a response.
PHP and Apache are preinstalled on the Mac. MySQL is not. You will need to download and install MySQL yourself.

I am unable to install apps as my iTunes states my computer is already authorised, then it tells me to authorise it? Does anybody out there know how to fix this. I am sorry if there is already a thread regarding this but there is 224,613 running atm.

I am unable to install apps as my iTunes states my computer is already authorised, then it tells me to authorise it? Does anybody out there know how to fix this. I am sorry if there is already a thread regarding this but there is 224,613 running atm.
I have an iMac that has iTunes on it.
My iPad is a first gen but its almost upto date, I haven't updated it for about a month.
If anyone out there has some information I would appreciate it a lot.
I am only doing this as iBooks isn't working
Thanks in advance.

Removing the SC Folder worked for me. But as an after thought and another potential problem although I do not think it is related, I had movies authorized thru my wifes Apple ID and she changed her ID a couple weeks ago. This, I think, could have had a contributing factor although not sure.
You have to delete the SC Folder and then reboot and then go into iTunes, re-authorize if it asks, then I was able to sync the movies. Hope this helps a little.

I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!

I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!

Thanks - Of Course the first thing I checked and did.
Disc Utility reads as follows:
Capacity : 159.18 GB (159,182,127,104 Bytes)
Format : Mac OS Extended (Journaled) Available : 11.47 GB (11,472,896,000 Bytes)
Owners Enabled : Yes Used : 147.71 GB (147,709,231,104 Bytes)
Number of Folders : 139,540 Number of Files : 511,832
Activity Monitor(Disc Usage) shows something quite interesting. Mac HD and Ramanan (Main User) - My hard drive is only 160GB! Would the retired engineer gentleman please note as well. Many thanks. Rams

Help!! ALL of a sudden I cannot open ANY of my pictures in iPhoto. I have clicked the iPhoto icon on my dock, as I always have done, but no pictures appear. Can anybody out there help me???? Thank you!

Help!! ALL of a sudden I cannot open ANY of my pictures in iPhoto. I have clicked the iPhoto icon on my dock, as I always have done, but no pictures appear. Can anybody out there help me???? Thank you!

What does appear?

Hi on MAC OSX 10.7.4 update on Aperture 3.3.1 has been done, still gget the error message "By opening the databank for the Mediathek „~/Pictures/Aperture Library.aplibrary" is an error" is anybody out there to help me?

Hi on MAC OSX 10.7.4 update on Aperture 3.3.1 has been done, still gget the error message "By opening the databank for the Mediathek „~/Pictures/Aperture Library.aplibrary“ is an error" is anybody out there to help me?

Alex,
did you just upgrade from an Aperture 3.2.x version to Aperture 3.3.1? This error message usually occures after the upgrade to 3.3.1, when Aperture cannont convert the library format to 3.3. format.
I'd try to repair the Aperture Library (Mediathek), before upgrading it. Hold down the option-command key combination (⌥⌘) while double-clicking Aperture. This will bring the "Aperture Library First Aid Tools" panel forward. Select "Rebuild Database" and see, if it will resolve the the problem.
Good luck
Léonie

I am trying to install Adobe Premiere Elements 9 without success. I successfully installed Photoshop Elements 9 without a problem. The message I am getting is 'Invalid Unicode file - .\Autoplay\LangData\en_US\lang.dat'. Anyone out there who can help pleas

I am trying to install Adobe Premiere Elements 9 without success. I successfully installed Photoshop Elements 9 without a problem. The message I am getting is 'Invalid Unicode file - .\Autoplay\LangData\en_US\lang.dat'. Anyone out there who can help please?

click setup, not autoplay.

Lync 2013 I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second Anybody out there having similar problems with call pickup Groups?

HI
I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second
Anybody out there having similar problems with call pickup Groups?

Hi,
Did you meet any other call delay when you using Lync?
As the issue happen for Lync desktop client, it can be performance issue. Please check if there is any error message from FE Server when the issue happen.
Also please check if you have updated Lync Server to the latest version, if not, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Is anybody out there who knows the steps to set up Logic Express? with an Alesis iO|26 interface

Similar Messages

Maybe you are looking for