Is anyone being bothered by constantly losing ethernet connection?

it's driving me insane. i'm in full-bore troubleshooting mode.
any clues i can and/or should follow?

it's losing it.
the cable guy has been here twice. at one point he was playing around on my computer waiting(again) for it to happen (again and again) and he turned to me and said "How can you stand this? It's driving me crazy now too."
then he talked with the Apple specialist at the cable place who said i had to contact apple because i shouldn't be losing ethernet, and he knew i was. so i contacted apple who told me to update to the current os (10.5.11) and I told him I was afraid to and he knew I had a previous complaint about 10.5.10 and was back on .8 just for my own peace of mind, so i DID update without incident and STILL I keep losing Ethernet. It's ruining my life now. not just bothering me.
So, I will call Apple monday, after researching users between now and then so I don't feel alone or know that i am alone for the next troubleshooting session. i have to get to the bottom of this because my warranty expires in Nov (I think...or maybe Dec.) and I am WAY TOO FAR from an Apple Store to take this lightly. I bought a laptop just because of the problem I had getting my desktop iMac fixed, which I miss, because it is CRT and as a graphic artist that is important to me and yet it is still broken.
The cable guy said "Worse comes to worse, if you go wireless, it won't matter any."
however, that might be a last resort AFTER my warranty expires and I'm stuck with a bum ethernet plug on my machine...which might be the case.??????

Similar Messages

HT1218 3TB Timecapsule version 7.6.4 is CONSTANTLY losing WAN connection. Comcast is our carrier, and I've ruled out the modem as it downloads at 30mbs consistently. Want to try and update firmware of Timecapsule, but it will not display an "Update" ico

3TB Timecapsule version 7.6.4 is CONSTANTLY losing WAN connection. Comcast is our carrier, and I've ruled out the modem as it downloads at 30mbs consistently.
Want to try and update firmware of Timecapsule, but it will not display an "Update" icon.
Grrrrr.....makes me miss my stupid PC set up as I could force it to do what I want!
Intermittent connection screws up Netflix, VOIP phone, Amazon, Streaming music via Spotify/Pandora, general internet access.....whole family is ****** off.
Any tips/tricks/ideas???
dave

Downgrade firmware to 7.6.1 .. as the latest is just lousy.
It is easy to downgrade.. hold down the option key whilst you click the version number. in Macs.. lots of stuff is hidden behind an option key.
I also strongly recommend a factory reset and use all SMB names.. not apple type names..
ie TC name.. TCgen4
Wireless name TCwifi (or give names to both bands.. TC24ghz and TC5ghz).
That helps all the non-apple part of the world.. connect.
Also Mavericks has now changed over to SMB as well. So even Mac is now windows networking.
Generally these two things. .7.6.1 firmware and SMB names will fix it.. if not post again as is another step that is possible.. controlling the WAN speed of the TC.

Losing ethernet connection

I am losing the ethernet connection every time I close the lid on the macbook and then reopen it later. I have to wait about a minute then unplug and replug the cable to get its status back. Does anyone know how to avoid doing this?
thanks,

One thing that can work, try this, please ignore the exact symptoms and connection and Hardware types, it's worked for many others than the stated...
http://docs.info.apple.com/article.html?artnum=304482

Mini Server losing ethernet connection to FiOS ONT

I have Verizon Fois which has worked flawlessly with either a Verizon supplied Actiontec router or a Time Capsule connected to the Verizon ONT (optical network terminal) ethernet.
I recently bought a mini Server to connect to the ONT directly to be my NAT, router, file server, etc. The mini can use DHCP to initially get an IP via DHCP, but it will lose it over time and revert to a self assigned IP. I have worked this with verizon tech support and their network engineers say that the ONT is fine but has only a one-way connection to the mini when it is in the bad state. I have used a tried and true cable which is not the problem. The mini has had one trip back to a genius bar and they reinstalled the OS and could not reproduce the problem.
I am about to resort to chalking it up as a weird mini ethernet hardware problem unless anyone has another idea. As I see it my next plan of action is to ask for a mini replacement to see if it helps.
Thanks for any ideas or suggestions.

Just like the KB said, the only way to get reconnected is to turn AirPort on and back off.
http://yellowmug.com/blog/2006/06/26/airport-problem/
It may also be in the developer tools. I can't remember where I got it. After downloading it. I modified it for my purposes and then had it launch when I logged in (Startup Items). It did the job, but every time the connection goes down, you do have to let the script do its thing, interrupting your work. However, at least it does it automatically.
I finally fixed the problem by getting a new Santa Rosa MacBook Pro. Works like a charm.
Mac OS X (10.4.9)

Constantly losing data connection

I have seen this many times all over the place but still can't find the answer. We have 2 thunderbolts in our family and both phones do the same thing. Says I have 4G but as soon as I open an app or try to use data it loses the data connection. I have to retry several times before it will connect. It gets to the point of rebooting the phone which doesn't even work all of the time. This has happened so much that it almost makes this brick unusable.
PLEASE I'm begging anyone for an answer. I have tried updates and phone settings.... I know I'm not the only one with this problem.

First, let me just say that I love the HTC Thunderbolt. It does have a few quirks, I'll admit, but so do Microsoft products, yet, millions of people buy them with a general understanding that there can be glitches here or there. For some reason, the general population just deals with them - probably because they don't have much choice.
Ok, so for the issue at hand, here's what I've seen happen on my device.
4G LTE can be intermittent - at my house and at my office.
There are 'dead spots' in my house, but overall very strong coverage in my house as well. There's an area in my house where I know not to bother using 4G. I switch to wifi if I need to use data.
Facebook is one of the apps which has the most issues for me. The 4G LTE indicator blinks off, Facebook app searches for data, and a 'Signal Lost' message pops up.
Last week, I went to use 4G for video stream using my HTC Incredible 4G (which is only about 6 weeks old) at lunch time in my office. Guess what - with an entirely different phone, 4G blinked off! I was using Netflix at that time in an area where it's known that we have a very strong 4G LTE signal.
So I mention this because the intermittency isn't an easy issue to solve because there are so many factors that can cause sporadic behavior. It could be the network, your location, your phone's electronic circuit board or the battery cover which contains the antenna for the phone, or the app you're using or even a combination of each.
As for big blue... I have a corporate iPhone which has 4G. It's not nearly as fast as the VZ phones, including my personal iPhone on Verizon's network. The data and the phone with big blue seem very reliable, but the speed is so stinkin' slow, there's absolutely no way whatsoever, I'd personally consider moving to big blue. But even this issue could be area dependent, phone dependent and location dependent. Perhaps if I went out of town and used another cell tower in a big city, I might see faster data.
So what's a person to do? My recommendation is to not bad mouth a company for not being able to fix every reported problem in the universe. Attempting to fix every reported problem would take such an enormous amount of resources, none of us would be able to afford any plan because the costs associated with this sort of troubleshooting are extremely high. There comes a point where it simply doesn't make sense to invest time and money into problem.
But, living in America means you can start a petition and if you get enough people to sign it, you're very likely to get attention. There are petitions out there for things users want cell phone manufacturers and network providers to consider. You could consider starting one and seeing if the problems are affecting a large enough user community to have Verizon prioritize a fix. It's free and one of our constitutional rights and it does no harm to Verizon's future business by turning potential customers away who may have had a perfectly good experience using Verizon's product offerings and their network. Just because one person had a bad experience, doesn't mean the guy or gal sitting next to him or her will be guaranteed to have the same issues.
Two people who participate in forums online were sitting side by side in the same building location with the exact same phone model. One person couldn't get a 4G LTE signal and the other had one. The same happens between the two Thunderbolt phone models in my household but I'm not planning to leave VZ any time in the near future. I've tried all providers and for me, the best choice is clearly Verizon.
With that said, I feel strongly that customers who pay for service, should be able to receive the service - no doubt. Best of luck to you! I hope you're able to find a suitable choice, here or elsewhere.

Airport Express Constantly Wants Ethernet connection

I'm just trying to set up my express to hook up to my usb printer. It is constantly flashing amber... I have downloaded new firm ware, but it still is flashing and constantly asking me to hook it up to ethernet, which I don't want to hook it up to the internet. I just want to plug it into the wall, with a usb printer and work... It's driving me crazy!

Don't let it drive your crazy - just ignore it, becuase that is all you can do.
If your Airport Express is not connected to another network, either by cable or wirelessly, then it won't be able to obtain an IP address - and that is all the flashing amber status light is trying to tell you. In the mode you are using your Airport Express, a flashing amber status light is always going to be normal and expected.

Canon Pixma 922 constantly losing network connection

I own a Canon Pixma 922 and from the very start I have been having issues with the netrworking staying connected.
My network is a simple 3 computer connected to a D-link 655 router with WPS abilities.
before this printer I had a very similar, older model. I set that up once, after purchase and until it finally gave up the ghost it remained connected solidly to all the computers in the house, including laptops that connected once a month if that. Power went out several times and it remained reliably connected.
The new Pixma 922 instead disconnects from the network several times a day. The record so far has been 3 whole days without the need to reset it. Otherwise the moment we try to print and the print job is not running, we just go to the rpouter, press the WAP button and quickly reset the network. After that it will work reliably for a few hours until the next time (usually later in the day).
I don;t need to point out how disappointed I am. For me it's rather easy to reset, but my wife is constantly aggraved by it (as if I designed it) and my daughter always forget how to do it and has to wait for me.
I have been unable to find similar posts to this one, so I assume it's not an endemic problem. But is there a way to fix it or at least troubleshoot it?

I have never experienced that, but I am not surprised.
in my case I am now able to print from my win 64 PC, my Mac Mini, my wife's win 7/32bit laptop (which was really the huge headache for me) and from my toilet paper roll if I'd ever bother to connect it.
Compared to the hell we went through for more than a year, pressing the friggin button, reconnecting the printer twice or more a day. My router is, of course, in a corner where I have to climb over a desk and behind a shelving system just to press that silly button. Compared to that, this is heaven. It hasn't lost its connection since the day I switched.
My mistake was to assume that Canon changed the way connections worked and that this was the new way to do it. I didn't realize it was an additional "easy" (for whom, I wouldn't know) connection method.
I guess after keeping udated on JS, PHP, Phyton, HTML, HTML5, XHTML, CSS and CSS3, facebook, twitter, gmail, analytics, google this and that, and more, I had little brainpower left to really think about this.
I am just happy that it works. It seems like a minor miracle each time I print something. I want to drop on my knees and shout Hallelujah! (and I have been an atheist for almost 50 years)
Good luck to you all.

When two Computers are online at the same time, constantly losing internet connection

I recently added a WRT160N router to my PC for a wireless Laptop elswhere in the house as well as adding a new network adapter card to my PC. When both the Laptop and the PC are online at the same time I am constantly getting booted offline and having to reset the connection, but when just the PC is on there are no prbloems and everything seems to work fine.
Any suggestions would be helpful, thanks in advance
Andy

In this case i think you need to change some settings on your Router. Follow the steps below.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Constantly Losing Wifi Connection

This has been going on for quite some time. The phone will be connected via wifi and I will look down and wifi is gone. The router is still listed and listed as excellent strength. All other devices work fine via the router.
Sometimes turning off power to router will reconnect the wifi, but not for vary long.
There is no consistency as to what causes it to lose connection.
This happens at all locations. I also have a router at the school and I have the same problem.
Please help as this is QUITE frustrating.

Pettrainer, I can see why this would be so frustrating, especially when there is no common reason why it drops. Do you have a task killer or antivirus installed on your phone? If so, please uninstall. These could randomly stop processes from running in the background.
Do you notice if this issue happened after a software update or downloading a new application? Try also forgetting your WiFi networks and setting up again. If no change after these steps, I would recommend a factory reset http://bit.ly/P75GGe.
MarquiaF_VZW
Follow us on Twitter @VZWSupport

Constantly losing iCloud connection (lighting bolt in icon)

Hi,
I am trying to do some major Library management, sorting out my Genres and so on.
However, I am finding that my connection 'to the cloud' is terrible. The cloud icon (next to Music, not per-track) is generally there and 'normal' there but as soon as a make a change it switches to the 'lightning bolt' icon and my change is not reflected in the Cloud.
When it works it's great. I collapsed some multi-disc compilations into 1 album and this change was almost instantly reflected on my iPhone. However my connection to whatever that cloud symbol represents appears to be awful, and there's no diagnostics available (other than for Windows…)
This is very, very frustrating as I consider my Mac's library 'authoritative' whereas The Benign And Magnificent Apple has decided that the Cloud is always right and my painstaking changes can be discarded. Because the symbol is generally 'OK' I can't even delay making changes until I know it's working, I just have to make a small change and see what Mr Icon says.
I have tried (over and over…)
Sign out and in to iTunes Match
Sign out of Apple ID and back in
Update iTunes Match
None seem to make any difference. My fundamental problem is my inability to diagnose why this connection is so poor, when Apple's Status pages claim no issues their end.
Any suggestions?
10.8.5 on a Late-2012 Mini running iTunes 11.4 - I'm aware of Mavericks but I have reasons to delay upgrade.

I've had this problem as well although not all the time. It's getting pretty frustrating between issues like this and now all of the issues with iOS8. It's like they've totally forgotten about iTunes and the music app which is the foundation for the iphone to begin with!

I keep losing Internet connection on my ipad 4 can anyone help?

Can anyone help? I keep losing Internet connection on my ipad 4 especially when the battery is running down

Hello there, CrumbleWeed27.
The following Knowledge Base Article should help with troubleshooting WiFi on your iPad:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Losing midi connection from PC2 controller

Logic is constantly losing midi connection with my MTP AV. Logic 9.0.2 OSX 10.6.8.... I have updated motu drivers, replaced usb cable to MTP, tried
different usb inputs to MacPro. I can see midi getting to the MTP but logic doesn't see it after midi dropout. Problem can be fixed by resetting midi
devices but irritating to have to do it every five minutes. Anyone else having this problem?
Thanks for any help.

I have a similar problem.
I am sending midi from macbookpro (10.6.8), via motu828, to an iMac (10.6.8) via a midisport.
The midisport always sees the midi input data, but I regularly loose the data within the iMac.
Rescanning the MIDI system reconnects to the incoming midi data but this it troublesome when performing.

IOS8 ipad2 - Losing 3g connectivity

I have an iPad 2 through AT&T. I am constantly losing 3G connectivity. I have to "power it off" and back on to reestablish my cellular data service. Airplane mode will not work. Has anyone else seen this problem..?? It is random and I have yet to find out if there is any combinations of apps that could cause this problem.
David

Since upgrading to iOS 8.0.2 (I did not upgrade to 8 or 8.0.1), I have had the same issues with my cellular service dropping that others are reporting. I also powered off and restarted my iPad 2 to get service back.
But, I remembered a prior problem with iOS and Wi-Fi and tried the workaround for that old issue and it worked. When the iPad shows no cellular service, go into Settings, Language and Region, and change your language to some other language than your default. Then after the language change, go back in and switch it back. Cellular service restored. It takes me less time than powering off and rebooting.
I do not know if this will help dropped or hung Wi-Fi sessions but would not be surprised given that this was a workaround for an old Wi-Fi issue. Since doing this on my iPad 2 I have not dropped cellular coverage but I expect the issue to return.
I have no idea why language settings are tied to or affect cellular or Wi-Fi but they have in the past and apparently they still do.

Brand new touch smart 520 losing wireless connection randomly

i have a brand new touch smart 520 and it is constantly losing wifi connection. it is only about 20 ft away from router so it is not a distance issue. it is also not my router because my phones and my laptop do just fine.. it is saying i have the latest drivers. what do i do now.. dont want to have to deal with this everyday!
thanks

if it is new return it

P2/MXF Footage in Premiere Pro CS6 constantly losing its linkage.

P2/MXF Footage in CS6 constantly losing its linkage. I'll relink the clips as the 'locate footage' box pops up, then a couple of minutes later, all the clips in the bin are showing the question mark and asking me to locate the clips again. It does this over and over. This happens on both my desktop machine and on my laptop.
Not having this problem with any of the file types at this point.

Just saw an official reply on another similar question asked at the same time as mine and that Adobe is aware of it and it's being worked on.
Thanks.

Is anyone being bothered by constantly losing ethernet connection?

Similar Messages

Maybe you are looking for