Is anyone else experiencing high frequency tone at the beginning of "Katy Perry: Part of Me" Trailer?

I was watching trailers on my Apple TV 2nd Gen, when my ears were viciously assaulted by a terribly unpleasant high-pitch tone. This occured at the beginning of the trailer for "Katy Perry: Part of Me". I tried other trailers and the tone was not repeated, but every time I watched that trailer through my Apple TV, the tone persisted, or rather, every time I selected that trailer through the AppleTV-Movies-Trailers. When I streamed the trailer from my iPhone, the tone was not present, nor was it present in the version watched from my MBA. I am curious if anyone else can duplicate this problem.

Yes it is the correct workflow, I've done it before.
I found a workaround: instead of transcode the clips I digitized from 29.97 to 23.98 first, I create the merged clips while the video is still the same frame rate than the audio (29.97). Then I apply the "cinema tools reverse telecine" on the merged clip.
This merge doesn't present the problem I had before. It is a bit much more complicated than the other way, because the transcoded merge is not always sync to the frame.
Does anyone had experienced the same problem than me with the 6.0.2 update?

Similar Messages

  • The new operating system (6) seems to have bugged up my iPad.  Has anyone else experienced this?  What is the cure?

    The new operating system(6) seems to have bugged up my iPad.  It froze when I tried to open a doc. And my office wifi will no longer connect.  Anyone else experiencing this. Any cure?

    Welcome to Apple Support Communities.
    If you qualify, based on your MacBook model and purchase date, you have several options for a free bottomcase replacement:
    http://www.apple.com/support/macbook-bottomcase/

  • I frequently have to remove and re-insert the SIM in order to access the internet. Has anyone else experienced this problem? Is the issue with the IPAD or the SIM card?

    I frequently have to remove and re-insert the SIM card in order to access the internet. Has anyone else experienced this?  Is it a problem with the IPAD2 or with the SIM card?

    Could be the SIM card, the iPad, or both.
    Start with replacing the SIM card.

  • Is anyone else experiencing higher temperatures when gaming after the SMC update?

    I turn off the turbo boost and usually get around 60-63 degrees when playing games such as FC3 and Skyrim but after the update I'm getting around 70-75. I use Lubbos fan control to ramp up the fans to 6000 RPM but still sits at around 70 degrees. Anyone else having the increase temperature issue?

    I'm using the stock Swype application that is already on the phone (not from the play store) and it works great with none of those problems.  Not sure if the original poster is using the stock version of Swype that does get updated with these updates, or downloaded another version from the Play Store as Ann154 mentioned.  There is really no reason to download it from the Play Store when it is already on the phone, so I assume they are using the stock version.  Again, I've had zero issues with Swype or anything else with this update. 

  • TS3406 Has anyone else experienced frequent dropped calls since the latest IOS upgrade?

    I have experienced dropped calls since I upgraded my IOS a few weeks ago. Anyone else having the same problem?  AT&T blames Apple, Apple blames AT&T, I'm stuck in the middle.
    HELP?!?!?!?

    I'm with ATT and no.
    I had a dropped call not long ago and it wasn't due to my iPhone or ATT. A friend with Sprint tried to call me while driving through a known low reception area with Sprint. Sprint dropped the call.

  • Is anyone else experiencing difficulty navigating some of the pages on iTunes?

    ITunes has always been a pretty good experience for me, but lately I'm having some issues navigating the site. For instance, when I search for all the album listings for an artist and locate them(especially an artist who has many albums like Marvin Gaye), my computers(MacBook Pro and iMac) both hang up when I try to scroll down the list of albums even at a normal speed. They stall, and I get the spinning gear. Eventually the gear stops spinning, and I can continue to scroll down ever so slowly. It makes searching for material tedious at best.
    Another issue is iTunes' new method of searching. Unless I am missing something, there is no longer any way to search for an album or song by a specific artist. You now have to search for the song or album and locate it by artist when a list comes up. Am I wrong?
    These types of issues make using iTunes difficult in my opinion not to mention what has been done to "My Alerts" and "Just Added". I have depended on these two items to keep me on top of the latest music for years, but they are no longer being kept current. I now rely on competitors' websites to keep me abreast of new music yet I still buy it on iTunes. This is a difficult way to stay current. One feature I really enjoyed was being able to set alerts for my favorite artists, but it seems that feature is no longer available unless iTunes automaticlly tracks the music you buy and alerts you accordingly.
    I just think navigating iTunes has become more difficult and wonder if others are having the same experience.

    I calibrated the battery on Saturday, let it die out completely then fully charged it; this did not help the battery drain but it did charge to 100%.
    Yesterday, I got home around midnight after work and my battery was at 21%, I let it charge from the moment I got home until noon today, that is approximately 12 hours.
    It only went up to 97%; I did not receive any calls in the time it was charging.
    What else can be recommended since I like the phone a lot?
    I upgraded on Friday, before the 4S, I was using my 2G running on 3.1.3 and never had battery issues with it!
    I am not familiar with battery performance of later phones but my friends who have owned 3G, 3Gs and iPhone 4 devices have never mentioned battery issues to me.

  • TS3581 iPhone 4S - The XCarlink iPhone/iPod accessory for Mazda Bose autochangers is functioning differently after iOS 5.1. The Shuffle function no longer works. Has anyone else experienced this problem?

    The XCarlink iPhone/iPod accessory for Mazda Bose autochangers is functioning differently after iOS 5.1. The Shuffle function no longer works and it plays Albums or Genius Playlisys only (not self-made playlists). Has anyone else experienced this problem?
    Previously, the iPod function enabled one to see the track that was playing and control playback (such as repeat or shuffle) via the iPhone screen. Now all I see is an "Accessory Connected" message.

    Somewhere in there, is there a question for us, your fellow users in these user to user support forums?

  • Since upgrading to the newest ios 6.1.26 itunes isn't showing my app list on the left side of the screen, nor does it show all of self made movies, only the purchased ones. Anyone else experiencing a similar problem?

    Since upgrading to the newest ios 6.1.2 itunes isn't showing my app list on the left side of the screen, nor does it show all of my self made movies, only the purchased ones. Anyone else experiencing a similar problem? The iTunes store and most of the other features show up but other normal features seem to be missing too. I wish I hadn't upgraded. Anyone else having this problem???? 

    If you are talking about iTunes on your computer use the iTunes View menu item, "Show Sidebar".
    If not, I have no idea what you are describing.

  • Has anyone else experienced a glitch when making cuts? Many of my cuts slip a frame or two when moved from source monitor to sequence and it started with the latest update

    Once I updated to the latest version of Premiere 2014.2 I started experiencing a glitch when my cuts would slip a frame or two. At first it was randomly. Then I had footage I was using that was an .avi file that I converted to .m4v using vlc and now in my Premiere project, are having the greatest difficulty keeping my original cut that I create in my source monitor. When I bring it into my timeline, the new frames are added. When I double click the clip into my source monitor, I see that my original cuts remain, not shifted. Looking back in my timeline, unwanted frames are still there. I have to bring it into my source monitor to guess where the right frame would be to compensate for this. It happens more often with the converted files but still happens to .mp4s as well. I am using a Mac Pro 15-in from Early 2011. Thanks for the advice in advance!

    I downloaded and installed the latest iTunes 11.2.1 (1) update yesterday. It appears to have corrected this issue to a large extent: plugging in an iThing to sync no longer seems to cause explosive growth in memory footprint. leaks reports a much slower growth in dead memory:
    leaks -nocontext -nostacks iTunes | grep total
    Process 27307: 353 leaks for 726488 total leaked bytes.
    20 minutes later:
    leaks -nocontext -nostacks iTunes | grep total
    Process 27307: 364 leaks for 1256056 total leaked bytes.
    20 minutes later, after DLing updated apps and doing another sync:
    leaks -nocontext -nostacks iTunes | grep total
    Process 27307: 364 leaks for 1256056 total leaked bytes.
    Memory allocation started at 70Mb, grew to 200Mb, and appears to have stabilized there.
    I'm going to keep an eye on it overnight, but it looks as if this may not be a complete system killer as it was before, at least in my case. In any case, I can highly recommend this latest iTunes update for anyone else experiencing this specific issue. Updating bug 16772016 with this new information.

  • Firefox crashes when i clear recent history if multiple tabs are open, is anyone else experiencing this?

    Firefox crashes (hangs, requires me to force close, and then doesn't actually clear the history) when i clear recent history if multiple tabs are open, i do this so i only lose the history and can maintain the tabs i want for the next session.
    I have always done this in Versions 3 without an issue, since moving to Version 4 it happens semi regularly. the more tabs i have open the higher the likelyhood of an error
    is anyone else experiencing this?
    Windows 7 pro sp1
    firefox 4
    addons: no script, adblock, pterodactl, imagezoom, reddit reveal, java, tinyeye, better privacy.

    This happens to me too. OS winXP home.

  • Has anyone else experienced web pages in Safari being unexpectedly re-directed to knock off MMO ad sites like 'League of Angels'?

    As recently as one month ago, I started experiencing a phenomenon where web-pages I was on would randomly be redirected to ad sites for knock-off MMO's. For example, if I had left a tab open to an article on Cracked.com, but was reading a different tab, the Cracked article would re-direct itself to another website. This usually was a minor annoyance, in that I would just have to go back a page in my browser, but this evening I was watching an episode on HBO Go and in the middle of streaming the video the web page abruptly changed to League of Angels. Has anyone else experienced these strange re-directs, or know what is causing them?

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-  
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • My iPhone 5 won't discover my iPad or any other devices via Bluetooth. Has anyone else experienced this?

    My iPhone 5 won't discover my iPad or any other devices via Bluetooth. Has anyone else experienced this?

    You haven't said which generation iPad you have, but this article might help you regardless:
    http://support.apple.com/kb/HT3647
    I imagine Keynote Remote uses Audio/Video Remote Control Profile which should be available on both your iPhone and iPad.
    I think you're saying that since you got the new iPhone 5, these two things occur:
    1.  Your iPhone cannot discover your iPad
    2.  Your iPad cannot discover your iPhone.
    If that's true, when you turn on Bluetooth on each of the devices, you might see old devices listed that are no longer used.  If you do, I suggest clicking the white arrow to the right of such devices and clicking "Forget this device".

  • Have been using Lightroom on my Apple computer for years. Now, ever since upgrading to Apple's  Yosemite operating system I get an error message (150:30) every time I try to open a lightroom file. Has anyone else experienced this problem?  Also how do I s

    Have been using Lightroom on my Apple computer for years. Now, ever since upgrading to Apple's  Yosemite operating system I get an error message (150:30) every time I try to open a lightroom file. Has anyone else experienced this problem?  Also how do I subscribe to Adobe's Premium Support? Every time I've tried (through contact support) I just get taken on an unending loop.

    I think we need a lot more information.
    Exactly what does the message say?
    Exactly what files are you trying to open?
    Exactly how are you trying to open them (what menu command or button or mouse action or keyboard shortcut)?
    And lastly, what version of Lightroom are you using?

  • I'm having issues with Time Machine since my upgrade to Mavericks, running at a snails pace.  Is anyone else experiencing the same?  WiFi is running fine, disabled all the Anti-Virus, still barely runs.

    Is anyone else experiencing the same?  WiFi is running fine, disabled all the Anti-Virus, still barely runs.
    2013 27" iMac

    I'm having the same issue, mine says prepairing to backup. I let it run for 12 hours and it never performed a backup. I have a Mac Book Pro

  • "We are currently experiencing some issues, please try again later. If the problem persists, contact customer support" - is anyone else experiencing this and how can I resolve this issue?

    I've been trying to download the photoshop free trial for the past three days but instead of installing a message saying "We are currently experiencing some issues, please try again later. If the problem persists, contact customer support" - is anyone else experiencing this and how can I resolve this issue?

    try some steps such as changing browsers and turning off your firewall for downloads
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

Maybe you are looking for

  • Connecting MiFi to direct tv. Asks for a security key?

    Connecting MiFi to direct tv satellite.  It asks for our security key?  Any ideas where to find it?

  • [Tip] How to protect Image file

    Hello, If you have ever wanted to protect your image file, especially within your Flash content, this article will be helpful. First of all, there are some points you need to protect when you deliver image data with Flash. 1. Internet Browser Cache.

  • Eclipse plug-ins for ODSI

    Are there ODSI plug-ins available that i can use on my eclipse environment instead of using workshop?

  • Move the jobs DIA to BCD

    Gud Mrg to All,     In my production system some of jobs (These jobs are related to crystal reports) are running in Dialogue up (DIA) processors. When these jobs are running BI jobs are not triggering, I want to move these jobs into Background (BCD).

  • Can not type in web address bar its gone

    unable to access the web address bar it has disappeared