Is anyone has installed latest Lync Server 2013 CU on HPv2
Hi,
Is anyone has installed latest Lync Server 2013 CU (http://support.microsoft.com/kb/2809243) on HPv2.
my concern is, if this CU is also applicable to HPv2. because the KB says installation on Enterprise and Standard editions of lync, but no where it is mentioned about HPv2.
Thanks
J.Patnaik
J.B.Patnaik
As far as I know, it is not applicable.
The installation media of Lync Server 2013 Multitenant Hosting Pack includes a tool for applying patches to the Lync Server software, \amd64\LyncServerUpdateInstaller.exe.
Lisa Zheng
TechNet Community Support
Similar Messages
-
Evaluation Version of Lync Server 2013
Hi Technet Guys,
Hi installed a Lync Server 2013 and the evaluation period has expired and i use
http://technet.microsoft.com/en-us/library/gg521005.aspx article to continue my evaluation,
when i use Get-CsServerVersion cmdlet i get Evaluation license key installed.
i want to know how much time is left to buy a license key because i forgot to check all option of this product, cause i was busy in other projects.
Best Regards,
LiorHi,
Please also check “Uninstall a program” on Control Panel, view when the Lync Server evaluation was installed.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
How to run a Lync Server 2013 in amazon ec2 Instance ?
Hi Friends,
I would like to install a Lync server 2013 in amazon ec2 instance. Let me know can i install Active Directory server, Lync Server 2013 and Media server in a single amazon instance ?. If it possible how can i do it ?. And is any other features need to install
to get the fully functional Lync server. Please help me am newbie in Lync environmentYou can get Lync working in EC2 and I have lab'd his many times. Having said that the process isn't that straight forward (especially if you plan to do voice) a lot of planning and testing, specifically of the network would need to be undertaken.
You can add multiple interfaces to an EC2 instance (see here http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-eni.html)
If you're hard set on using EC2 you can get it to work, but I personally would look at Office 365 E4 or a small on-premise deployment depending on your requirements.
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Lync Server 2013 Installation Error
Hello,
I am using my AD in Windows Azure VMs. I created new VM of A3 (4 cores, 7 GB Memory) Windows Server 2012 R2, Port 1433 MSSQL added, made it a member of Domain and planned to install first Lync Server 2013 on it.
In "Setup or Remove Lync Server Components" of "Install or Update Lync Server System", got an Red Coloured text "An error
occurred while applying SQL script for the feature BackendStore."
I have not enabled monitoring and archiving server in topology builder. I added "Network Service" and assign "Full Control" in Security Permissions of "C:\CsData" and "C:\LyncShare".
I executed the SQL Setup Wizard and upgraded any instance to 2012.
Please guide.
Thanks, Divyaprakash KoliIs the Lync deployment in Azure as well? If so please check this
blog by Guy Bachar. Look for "Houston, we have a problem"
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Lync Sorted blog -
Could anyone please explain why the director has been removed from spotlight as it had much importance in LYNC 2010 and now being an optional role in LYNC server 2013.[any call flows regarding director servers would be much useful]
Hi SJ Praveen,
A Director is a server running Lync Server 2013 that authenticates user requests, but does not home any user accounts. Lync 2013 Front End servers have the same registrar service and functionality
as the Director.
The Director isn't providing any special functionality. If the Director goes down, all pools would become inaccessible when the clients queried DNS for the SRV record until an administrator
makes a manual internal DNS change that points users to a Front End pool to handle the sign-in request from Lync clients. Microsoft has made the Director functionality relevant for organizations that have specific security requirements, such as allowing all
external users to register to a specific internal server instead of the Front End servers. This server role is merely optional and not needed for most Lync Server 2013 deployments.
Best regards,
Eric -
Team,
Unable to start FE service on one of the FE server, 2 Enterprise lync 2013 pool one FE in each pool, only following error in event vrw,
Log Name: Lync Server
Source: LS Server
Date: 12/30/2013 12:10:55 PM
Event ID: 12290
Task Category: (1000)
Level: Error
Keywords: Classic
User: N/A
Computer: ACS465-BH102.me.ykgw.net
Description:
The evaluation period has expired.
The evaluation period for Microsoft Lync Server 2013 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2013 has expired.
Resolution:
Please upgrade from the evaluation version to the licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Server" />
<EventID Qualifiers="50152">12290</EventID>
<Level>2</Level>
<Task>1000</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:10:55.000000000Z" />
<EventRecordID>73953</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security />
</System>
<EventData>
</EventData>
</Event>
Log Name: System
Source: Schannel
Date: 12/30/2013 12:13:36 PM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:13:36.779033200Z" />
<EventRecordID>83985</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="3668" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Server is already on Full version, ran Reset-CsPoolRegistrarState
for fillrest as wel as serviceret
Followed below as well,
http://social.technet.microsoft.com/Forums/lync/en-US/2a7e27ce-2dea-4e37-91ea-1ed42e110198/issue-updating-from-eval-to-volume-licenses?forum=ocsplanningdeployment
Currently done failover to another pool and users can login,
however i cant get the front end service on this server.Any pointers would be appreciated.
Praveen | MCSE Messaging 2003rit, the command is not doing the trick since its already full version,
PS C:\Users\lyncadmin> Get-CsServerVersion
Microsoft Lync Server 2013 (5.0.8308.0): Volume license key installed.
only one server in one pool, total two pools.
Lync 2013 is on Win 2008 R2, and the event in system im inclining to since i have tried all,
Log Name: System
Source: Schannel
Date: 12/30/2013 9:26:34 AM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T06:26:34.877077500Z" />
<EventRecordID>64911</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="620" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Praveen | MCSE Messaging 2003 -
In my opinion, the error has not completely fixed in KB2967628. After I install the latest November 2014 cumulative
update. I see the following behavior. User A searches for user B. User B never sign in to the Link. There are three fields in the active directory for User B: officePhone, mobilePhone and homePhone (these fields contain different numbers). When searching on
the mobile client (Android/IOS) for user B – as result user A see only mobile number. If User B At least once will go to Link (sign in) when his search will work, (find officePhone). If User B will change, the privacy settings for user A is in the search will
be displayed homePhone field.
On the Desktop client,
I can find all the fields without those actions performed in the example. If I make a request
to the service UCWA manually like this (below
the text) before
actions, which I performed in example, I did not receive officePhone and homePhone – only mobilePhone field.
GET "https://lync.domainname:443/ucwa/oauth/v1/applications/XXXX/people/search?query=$usename$&limit=200" -H "Content-Type: application/json" -H "Accept: application/json" -H "Authorization: $USENAMETOKEN$"Hi,
Based on your description, I’m sorry I’m a little confused about the following you mentioned. I understand the issue is we can only see the mobile number in the contact card on Lync mobile client and that we can search for users based on their office number,
we can see the home phone field in the contact card but there isn’t number showing. I anything I have misunderstood, please feel free to let us know.
“When searching on the mobile client (Android/IOS) for user B – as result user A see only mobile number. If User B At least once will go to Link (sign in) when his search will work, (find officePhone). If User B will
change, the privacy settings for user A is in the search will be displayed homePhone field.”
According to the KB29677628, this issue is caused by UCWA only sending the work number, and we need to install the update for web components server
http://support.microsoft.com/kb/2967628/en-us
August 2014 Cumulative Update 5.0.8308.738 for Lync Server 2013, web components server
https://support.microsoft.com/kb/2937297/en-us?wa=wsignin1.0
Could you please run the following command to check if the web components server version is
5.0.8308.738?
Get-WmiObject
–query 'select * from win32_product' | where {$_.name
–like "Microsoft Lync Server*"} | ft Name, Version
–AutoSize >c:\User\name\Desktop\version.txt
Best Regards,
Cindy -
Lync Server 2013 in a Remote Desktop Environment
Hello Community,
We have a client who is sold on Lync. He wants to install Lync server in a Terminal Server but his environment is RDHS 2008v2 and his end users have thin clients. According to MS official position It is not supported. Has anyone successfully implemented
this ? If yes what are the pitfalls that lay ahead with regards to audio/video redirection, desktop sharing etc. He has traditional phones but really he wants to get rid of them and go Lync full blown.The Virtualizing Lync Server 2013
(WindowsITPro) article presents a nice overview to this topic.
In additon, do take a look at the following resources which may be helpful:
Planning a Lync Server 2013 Deployment on Virtual Servers
http://www.microsoft.com/en-us/download/details.aspx?id=41936
Deploying the Lync VDI plug-in in Lync Server 2013
http://technet.microsoft.com/en-us/library/jj204683.aspx
Making the Microsoft Lync to work best in your virtualization environment
http://www.youtube.com/watch?v=WiZX3uoVKV8
Note that unlike Lync Server 2010, the Lync 2013 VDI browser plug-in is designed to support VDI environments (with paired audio/video) running on supported platforms (from Windows Server 2008 R2 to 2012/R2).
Hope this helps.
Thanks / rgds,
TechNet/MSDN Forum Moderator - http://www.leedesmond.com -
Office Web Apps server / Lync server 2013
Hi I have installed a Lync 2013 Server and Office Web Apps Server. Configured Lync topology, Office Web Apps farm and certificates.
However when i start the services i get this error message in the log saying Office Web Apps discovery failed.
Event ID: 41033
Description:
Office Web Apps Server (WAC) discovery failed, PowerPoint content is disabled.
Attempted Office Web Apps Server discovery Url:
Received error message: Invalid Uri syntax for WAC configuration
The number of retries: 1,
Cause: Office Web Apps Server may be unavailable or network connectivity may have been compromised.
Resolution:
Check HTTPS connectivity from this box to the Office Web Apps Server deployment using the discovery Url.
I can access the OWAS server Url from Lync Server
Connecting to the HTTPS discovery URL is working fine, and brings up the XML-page (after i click "show all content").
The two servers are located on the same internal network, DNS resolves fine both ways, and no firewall rules blocks any connections between the two. Can anyone please help me figure this out?
Only identical problem found online is here (Invalid Uri syntax for WAC configuration):
http://blogs.technet.com/b/dodeitte/archive/2012/09/10/office-web-apps-server-amp-lync-server-2013.aspx
He resolved the problem by assigning a new OAuthTokenIssuer certificate. This however did not fix the problem in my case.
Regards
Sverre A. VeelHi,
In addition, please make sure you have restarted front end and office web apps server after reissuing the certificate.
Kent Huang
TechNet Community Support -
Lync HP 4120 Sign in problems with Lync Server 2013
Hi, this is my second request for help, this with more information...
I`ll ready install the follow infrastructure: (I change the name of my organization for contoso)
Lync Server 2013 Installation with Enterprise mode with 1 front end : Pool: lync.contoso.com Front End: lyncfe01.contoso.com Back End: lyncsql01.contoso.com
I`ll ready install a PKI infrastructure with two tiers, the root offline and the subordnate ac.contoso.com
This with the defailt algorithm configuration RSA SHA1
My phones are HP 4120
In the Front End Server i configured the SCHANNEL registers:
EnableSessionTicket in 2
Send..etc in 0
Ok, the installation is ok, services are OK, Client login trough PC its OK, PSTN Configuration... (I can make a phonecall with the lync client of Office 365)
Commnd Checks:
When i run the command Test-CsPhoneBootstrap -PhoneOrExt 12345 -PIN 123456 -TargetFqdn lync.contoso.com
The result is:
Target Fqdn : lync.contoso.com
Target Uri : https://lync.contoso.com:443/CertProv/CertProvisioningService.svc
Result : Success
Latency : 00:00:09.0559615
Error Message :
Diagnosis :
When i run the command Test-CsPhoneBootstrap -PhoneOrExt 12345 -PIN 123456 for
check the DHCP the result is:
Target Fqdn : lync.contoso.com
Target Uri : https://lync.contoso.com:443/CertProv/CertProvisioningService.svc
Result : Success
Latency : 00:00:09.0559615
Error Message :
Diagnosis :
When i run the follow command
PS C:\Users\Administrator> $cred = Get-Credential
cmdlet Get-Credential at command pipeline position 1
Supply values for the following parameters:
Credential
PS C:\Users\Administrator> Test-CsClientAuth -TargetFqdn lync.contoso.com -UserSipAddress "sip:[email protected]" -UserCredential $cred
I got this:
Target Fqdn : lync.contoso.com
Target Uri : https://lync.contoso.com:443/CertProv/CertProvisioningService.svc
Result : Success
Latency : 00:00:00.3431783
Error Message :
Diagnosis :
But.. when i use the same command but i remove the -targetFqdn for check the Dhcp i got this:
VERBOSE: Workflow Instance Id 'bca95636-af7b-4b0a-b43d-dba259294b2d', started.
VERBOSE: Command line executed is 'Test-CsClientAuth -UserSipAddress "sip:[email protected]" -UserCredential $cred
-Verbose'.
Target Fqdn :
Target Uri :
Result : Failure
Latency : 00:00:00
Error Message : 10060, A connection attempt failed because the connected party did not properly respond after a period
of time, or established connection failed because connected host has failed to respond 194.90.8.20:5061
Inner Exception:A connection attempt failed because the connected party did not properly respond after
a period of time, or established connection failed because connected host has failed to respond
194.90.8.20:5061
Diagnosis :
VERBOSE: Workflow 'Microsoft.Rtc.SyntheticTransactions.Workflows.STClientAuthWorkflow' started.
Workflow 'Microsoft.Rtc.SyntheticTransactions.Workflows.STClientAuthWorkflow' completed in '5.62E-05' seconds.
Target web service Url not provided. Will have to extract it from authentication challenge.
An exception 'Unable to establish a connection.' occurred during Workflow
Microsoft.Rtc.SyntheticTransactions.Workflows.STClientAuthWorkflow execution.
Exception Call Stack: at Microsoft.Rtc.Signaling.SipAsyncResult`1.ThrowIfFailed()
at Microsoft.Rtc.Signaling.Helper.EndAsyncOperation[T](Object owner, IAsyncResult result)
at Microsoft.Rtc.SyntheticTransactions.Activities.GetSTSUriActivity.InternalExecute(ActivityExecutionContext
executionContext)
at Microsoft.Rtc.SyntheticTransactions.Activities.SyntheticTransactionsActivity.Execute(ActivityExecutionContext
executionContext)
at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
at System.Workflow.Runtime.Scheduler.Run()
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at Microsoft.Rtc.Internal.Sip.TcpTransport.OnConnected(Object arg)
'GetSTSUri' activity started.
Starting STS Uri Discovery...
ERROR getting STS Uri.
'UnRegister' activity started.
'UnRegister' activity completed in '3.12E-05' seconds.
VERBOSE: Workflow Instance ID 'bca95636-af7b-4b0a-b43d-dba259294b2d' completed.
VERBOSE: Workflow run-time (sec): 126.0548512.
The Real Problem is that my Lync HP 4120 Phone can't make a sign in, not from USB cable loging, nor with PIN authentification
When I try to make a login with the USB cable, I set the user and password and the phone says "Connecting to Lync".. "Downloading a certificate" ... "Installing certificate"... "Downloading Certificate"...
"Installing Certificate".. forever
When I try to make a login with PIN Authentification, the phone first displays the following:
Account used is not authorized, Please Contact your support team and then shows this:
An Account matching this phone number cannot be found. Please contact your support team.
The Pin authentification is enable
In the Lync Server Enable Kerberos Authentification, Enable Integrated Windows Authentification and Enable Certificate Authentification are enable
This is the configuration from DHCP
Starting Discovery ...
Sending Packet (Size: 284, Network Adapter: xx.xx.xx.xx, Attempt Type: Broadcast only)
--Begin Packet--
DHCP: INFORM (xid=130EA7FA)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 319727610
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = Xx.xx.xx.xx
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 0.0.0.0
DHCP: Client HW Address (chaddr) = FC15B4###--End Packet--
Received Packet
Sender:xx.xx.xx.xx:67, Size:363
--Begin Packet--
DHCP: ACK (xid=130EA7FA)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 319727610
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = xx.xx.xx.xx
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 0.0.0.0
DHCP: Client HW Address (chaddr) = FC15B4100289
DHCP: Server Host Name (sname) =
DHCP: Boot File Name (file) =
DHCP: Magic Cookie = 99.130.83.99
DHCP: Option Field
DHCP: DHCP MESSAGE TYPE( 53) = (Length: 1) DHCP ACK
DHCP: Server Identifier( 54) = (Length: 4) XX.XX.XX.XX
DHCP: Client Identifier( 61) = (Length: 0) ()
DHCP: SIP Server( 120) = (Length: 17) enc:0 lync.contoso.com (00046C796E6306756E69736F6E026D7800)
DHCP: Host Name( 12) = (Length: 0)
DHCP: Vendor Identifier( 60) = (Length: 0)
DHCP: Param Req List( 55) = (Length: 0) 0 0
DHCP: Vendor Info( 43) = (Length: 86) MS-UC-Clienthttpslync.contoso.com443%/CertProv/CertProvisioningService.svcÜNAP (010C4D532D55432D436C69656E7402056874747073030E6C796E632E756E69736F6E2E6D78040334343305252F4365727450726F762F4365727450726F766973696F6E696E67536572766963652E737663DC034E4150)
DHCP: End of this option field
--End Packet--
Result: Success
DHCP Server : xx.xx.x.xx.
SIP Server FQDN : lync.contoso.com
Certificate Provisioning Service URL : https://lync.contoso.com:443/CertProv/CertProvisioningService.svc
thanks for all, hope somebody can help me with this problem.. i am going crazy...Hi, i connected the Lync Phone to another switch and i update the firmware to the newest firmware and i got the same problem..
The lync phone download the certificate but cant install it and the still the same error with the SIP login
An Account matching this phone number cannot be found. Please contact your support team. -
Clean up Active Directory after dirty deleted lync server 2013
Hi All,
i have trouble with my lync server, im gonna re-deploy my lync server 2013 after it has deleted without no purpose.
based on my experience if we want to deploy with the same name and configuration like previously. setup with failed because it has already register in adsiedit ?
please tell me how to clean up my AD.
thanks for you assistance guys,
Best Regards,
ariHi,
On DC, please run adsiedit and connect to the Configuration naming context.
Browse down to Configuration > Services > RTC Service and then just delete the entire
RTC Service container. Also delete the Computer object(s) for any Lync Server you had previously installed. Then you can install the new Lync Server 2013 with no issue.
Here is a similar case may help you:
https://social.technet.microsoft.com/forums/lync/en-US/2fbbb75c-8e76-4284-9f32-a27e95e30c49/remove-lync-from-ad-for-fresh-deployment
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support -
How to achieve Multi-Tenant in Lync Server 2013 Enterprise Edition
Hi,
As LHPv2 is discontinued, is anyone has idea how to achieve Multi-Tenant in Lync Server 2013 Enterprise Edition?
e.g users from different tenants should not be able to communicate unless it is allowed either by federation or any other form.
J.B.Patnaikonce a Topology has been published you can not change the FQDN.
Also you can refer shah-Khan answer, it will be helpful for you
http://social.technet.microsoft.com/Forums/lync/en-US/47d4e101-4f7b-4115-8f44-897eb5410acb/need-to-change-a-published-fqdn-lync-pool-for-lync-enterprise-2010?forum=ocsplanningdeployment
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
SQL Server Sizing for Lync Server 2013
Hi,
We are planning to install Lync Server 2013 with 800 users, but I can find any information about the SQL Server instance sizing.
Can anyone give me an estimation or prior experience with similar installations? I need to know Disk size, memory an CPU number.
Thanks in advance.There are a few variables to consider. Are you turning on monitoring, archiving, and is enterprise voice enabled? Is persistent chat enabled? Is it virtualized? Is this Lync enterprise edition or standard with a portion of the
databases hosted on full SQL? Are you required to retain any information or logs for a specific amount of time? Are you keeping SQL backups local with maintenance plans and for how long?
I would suggest not going below 16GB for a SQL Server, but you may not need much more. If it's virtual I'd throw 4 cores at it at least and disk space will vary based upon what you're doing and how long you want to keep things. Thick provision
those drives and make sure the logs and databases are on separate partitions.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications -
Persistent Chat (Lync Server 2013) with Lync 2010 Group Chat
I have successfully deployed Lync Server 2013 and both 2013 and 2010 desktop clients connect and function as expected.
The problem is with Persistent Chat. It works perfectly with the 2013 desktop client but - whilst 2010 Group Chat connects - I receive the error message "The [LOGON_DOMAIN] is not available". No chat rooms are available and I am unable to search.
I have been unable to locate anything on the web which discusses the problem.
I do not know whether this makes a difference but the 2010 clients use terminals rather than dedicated workstations.
Can anyone shed any light on what the problem may be?Have you created a CsPersistentChatEndpoint to allow the Group Chat client (2010) to connect to Persistent
Chat server? Please take a look at: http://technet.microsoft.com/en-us/library/jj204901.aspx
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013. -
I am getting an error in "Step 2 - Setup or Remove Lync Server Components" of "Install or Update Lync Server System" step.
"An error occured while applying SQL script for the feature BackendStore. For details, see the log file...."
Additionally, all previous steps such as: Prepare Active Directory, Prepare first Standard Edition server, Install Administrative Tools, Create and publish topology are done without any errors. The user that I used to setup the Lync server is member of:
Administrators
CSAdministrator
Domain Admins
Domain Users
Enterprise Admins
Group Policy Creator Owners
RTCComponentUniversalServices
RTCHSUniversalServices
RTCUniversalConfigReplicator
RTCUniversalServerAdmins
Schema Admins
I have tried to re-install all the things and started to setup a new one many times but the same error still occurred. Please see the log below and give me any ideas/solutions to tackle this problem.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Initializing DbSetupBase
Parsing parameters...
Found Parameter: SqlServer Value lync.lctbu.com\rtc.
Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
Found Parameter: Publisheracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Administrators;LCTBU\RTCUniversalServerAdmins.
Found Parameter: Replicatoracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
Found Parameter: Consumeracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Read-only Administrators;LCTBU\RTCUniversalReadOnlyAdmins.
Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
Found Parameter: Role Value master.
Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 2100.
Sql version is acceptable.
Validating parameters...
DbName rtcxds validated.
SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
DbFileBase rtcxds validated.
DbPath D:\CsData\BackendStore\rtc\DbPath validated.
Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
LogPath D:\CsData\BackendStore\rtc\LogPath validated.
Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
Checking state for database rtcxds.
Checking state for database rtcxds.
State of database rtcxds is detached.
Attaching database rtcxds from Data Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath, Log Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
The operation failed because of missing file '\\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath\rtcxds.mdf'
Attaching database failed because one of the files not found. The database will be created.
State of database rtcxds is DbState_DoesNotExist.
Creating database rtcxds from scratch. Data File Path = D:\CsData\BackendStore\rtc\DbPath, Log File Path= D:\CsData\BackendStore\rtc\LogPath.
Clean installing database rtcxds.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
Initializing DbSetupBase
Parsing parameters...
Found Parameter: SqlServer Value lync.lctbu.com\rtc.
Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
Found Parameter: Serveracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 2100.
Sql version is acceptable.
Validating parameters...
DbName rtcshared validated.
SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
DbFileBase rtcshared validated.
DbPath D:\CsData\BackendStore\rtc\DbPath validated.
Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
LogPath D:\CsData\BackendStore\rtc\LogPath validated.
Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
Checking state for database rtcshared.
Reading database version for database rtcshared.
Database version for database rtcshared - Schema Version5, Sproc Version 0, Update Version 1.
Thanks and Regards,
Thanh LeThanks Lạc
Phạm 2
I Had similar issue i end up uninstalling and reinstallting but same issue, then i change the drive but same issue. It was I/O issue. After adjusting my I/O it fix our issue and installation went on without any issue.
If any one using KVM here is detail article
We just give this option cache=‘writeback
using this article http://www.ducea.com/2011/07/06/howto-improve-io-performance-for-kvm-guests/ and http://itscblog.tamu.edu/improve-disk-io-performance-in-kvm/ this fix my issue thanks
Maybe you are looking for
-
Unable to launch forms after upgrade from 12.1.1 to 12.1.3
APP-FND-01496 CANNOT ACCESS APPLICATION ORACLE PASSWORD.
-
How do I get to the logic board on a PSC 2210?
I would like to swap a logic board from a known good machine to one which is having issues. How do I get it out? This question was solved. View Solution.
-
I have Nikon D7100 and shoot in raw. I have tried to open a raw file in elements 10 but it states it does not support the format. I also have a D800 and these open file in elements camera raw. Can anyone help please?
-
Orginal invoice no in a sales return
Dear Gurus, I'm developing a report where I have to show the original invoice no in a sales return. My input value would be PO field in the order. Pl help Tks
-
BPC7.5NW Reporting - EVDRE: AfterRange adding double rows!
Hi, I'm having a problem formatting a BPC 7.5 EVDRE report. I want put a blank row, with border top and bottom between my account expansions (GSV, Tonnes, Cases, other units etc) This is what my report looks like: ht[http://img163.imageshack.us/img16