Is Anyone Has Transported the Remodeling Rule into QA and Scheduled ?

Hi all,
    I have created a Remodeling Rule to add a characteristic to the InfoCube
and successfully transported this Remodeling Rule into QA.
     I could see this Remodeling Rule in the 'Remodeling Rule' look-up and when
I try to DISPLAY this Rule it gives the error of
'Namespace '/BIC/' must be set to 'changeable' (transaction SE06)
Message no. R7063.
We are in BI 7.0 with SP17.
Did you open the client with support of Basis to display and Schedule it?
Thanks in advance.
Regards,
Venkat.

This problem will be fixed if we open the client.
Thanks,
Venkat.

Similar Messages

  • Did YOU Transport the 'Remodeling Rule' into QA system and Scheduled it ???

    Hi all,
    I have created a 'Remodeling Rule' of BI 7.0 feature to add a characteristic to the InfoCube
    and successfully transported this 'Remodeling Rule' into QA system.
    Do we have to keep the CLIENT open before we start the 'Schedule' of  'Remodeling Rule' in QA or Prod systems? 
    Could you PLEASE answer it if YOU have really worked on the 'Remodeling Rule'. PLEASE....
    Thanks in advance.
    Regards,
    Venkat.

    Hi Venkat,
    You can keep the Client Open in QA when you are applying an Remodelling Rule.
    Once you created Remodelling Rule. you can start Immdetely to schelude.
    However In Prod, you need to Close the Client before you apply the Remodelling Rule (You have to option to schedule it later if youare directly applying it in Prod box) or Trasport to Prod from QA.
    Because the charateristic which youadded to the cube should not afftects the REports created on that perticular Cube.
    Rewards points if helpfull
    Regards
    Hari

  • Unable to Transport the Date rules in action condition

    Hi Experts,
    I am unable to Transport the date rules in the action condition in my actions to the Quality system from development system. the screenshot for development system- and the quality system are attached.
    I tried to include the Action condition twice in the transportfrom Development  but somehow the date rule is missing in the
    action condition aftre  transpor to the quality systemt.
    The date rule has been transmitted sepaartely into the Quality system and is available there. Please help me in this
    Thanks,
    Rohit

    hello
    did you get to solve this problem? I'm having the same issue and havent been able to figure it out yet on how to solve it
    thanks

  • Can You DISPLAY the Remodeling Rule in BW QA System ??

    Hi all,
        Can you Display the Remodeling Rule (BI 7.0 feature) in QA system, PLEASE ???
        The TCode for 'Remodeling' is RSMRT.
        Select any 'Remodeling Rule' from the look-up and try to DISPLAY it.
         You could find all the Remodeling Rules in RSCNVCGHEADER Table also.
        Thanks in advance.
    Regards,
    Venkat.

    Hi Subash Balakrishnan,
        I am getting the following when I try to DISPLAY the Remodeling Rule in QA system which is transported from Dev system:
      'Namespace '/BIC/' must be set to 'changeable' (transaction SE06)
    Message no. R7063.
      Basis team says to open the CLIENT in QA system.
       Did you try to display it QA system without any problem, PLEASE ???
    Thanks,
    Venkat.

  • I removed my battery in an attempt to insert a SIM card, obviously without knowing how to insert the SIM card. I put the battery back into place and it was already charged 100%, but it's stuck in recovery mode. I've already restored it, but it won't boot.

    I was trying to insert a SIM card into my iPhone 4 without actually knowing how to do so. I assumed that I was to remove the back of the phone and find a slot for it near the battery. I removed the battery in an attempt to find a SIM slot, and was obviously unsuccessful. I put the battery back into place and screwed the phone back plate back on. Note: the battery was fully charged and the iPhone was working perfectly fine before. After screwing the iPhone back into place properly, I thought, I attempted to cut the phone on and it would not do so. I put it back on the charger, and the screen came up that says "Connect to iTunes". I obviously couldn't do so if its plugged into the wall. I plugged into the computer, connected it to iTunes, went through the Recovery mode process, and it still won't turn on. The computer says that the iPhone is in Recovery mode, but iTunes can't do anything because it has already been restored. When I disconnect it from the computer, I hold all buttons in all possible combinations, but it won't turn on at all. When I plug it into the wall, it again says to connect to iTunes. I don't know if I damaged the battery or any part within the iPhone, but I was sensitive in my approach to removing the battery and putting it back in, and there is no visible damage whatsoever. I am extremely frustrated and in desperate need of Apple-Pro help.

    do you have a cdma iphone 4? becauase cdma iphones dont have a sim card slot... the providers that use cdma technology here in the us would be verizion, sprint, criket, ect... if you want to use your iphone 4 on att or tmobile (gsm carriers). then you would need a gsm iphone 4 (has sim card slot). a gsm iphone 4 is different than a cdma iphone 4 (they have different radio chips). maby you missed the sim card slot? sim card slot would be on the side of the phone.. never inside (unless it has a removable back cover like the galaxy s3 or s4), if you dont see a sim card slot on the side of the phone than you have a cmda iphone 4. can you tell me what carrier you are trying to use?

  • HT1420 how do i Deauthorize a computer that has had the hard drive lock up and can not get it working

    how do  i deauthorize a computer that has had the hard drive lock up and can not get it working

    You can only deauthorise individual computers directly on them. Otherwise if you've reached the 5 computer limit, then you should be able to log into your iTunes account and 'deauthorise all' (which you can only do once every 12 months) and you can then (re-)authorise up to 5 computers : authorising and deauthorising.

  • My phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

    my phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

    Hi, Just put phone in the recovery mode and restore to the factory settings. It should work.

  • Can anyone explain what the 'other' storage consists of and how I can decrease the size please?

    Can anyone explain what the 'other' storage consists of and how I can decrease the size please?

    Welcome to Apple Support Communities
    "Other" refers to OS X files, caches, downloads, documents. See Other in this website > http://pondini.org/OSX/LionStorage.html
    I would not worry about Other because they contain files that you need, but if you want to decrease the size, start deleting downloads and documents

  • Where can I find a retail copy of MAC OSX Snowleopard, that has all the drivers, for both desktop and Laptops?

    Where can I find a retail copy of MAC OSX Snowleopard, that has all the drivers, for both desktop and Laptops?

    No. 10.6.3 was the last retail release of Snow Leopard. Download the 10.6.8 Combo updater and put it on a flash drive to make it easier to install the largest part of the update.
    Also, don't push the same disk image of SL to your Macs unless they are exactly the same model as it was originally installed on. The wrong hardware drivers will otherwise be in use.

  • I have iMovie 8.0.6 and an iPhone 4S.  I took hours of videos on vacation (Australia and New Zealand) and want to make a movie.  I've imported the first batch into iMovie and started the project.  I just realized that I shot both horizontally and vertical

    I have iMovie 8.0.6 and an iPhone 4S.  I took hours of videos on vacation (Australia and New Zealand) and want to make a movie.  I've imported the first batch into iMovie and started the project.  I just realized that I shot both horizontally and vertically and when I preview (on full-screen) what I've combined, first it's wide-screen, then it's tall, narrow with wide black sides. 
    The film looks choppy, no flow, since it alternates horizontally and vertically.
    I can import the vertical clips two ways:  "Full-Original Size", or "Large 960x540."  But the vertical clips have very short, fat people.
    This didn't happen with my Flip HD; the movies are smooth and terrific.  My heart is breaking.....please, how can I make the videos match?

    Yes, I'd like to use all the video I shot, put it together with music, titles, etc. and make it consistant.  when it goes from full screen to this vertical, narrow clip, it's very awkward.....and it's so narrow, it's hard to see what I'm looking at; my eyes don't make the adjustment quickly.

  • Split the material cost into labor and overhead costs

    Hello Experts,
    We get Finished Goods from another plant and that plant is not on SAP. So we load these materials as Finished Goods and enter the price in the costing tab and we do run cost estimates. In the cost estimate we see this price as material cost. How can we split this material cost into material + labor + over head costs? Is there anywhere we can enter the percentages that would split the total price into material and labor and overhead prices? I appreciate your time and response.
    Thanks In Advance

    HI Venkat,
    You can only split material cost using origin groups and not into material, labour & OH as you may know the cost components are grouping of cost elements (with an option to use origin groups).
    If this is too important for you to maintain that cost component split, then I see the only way is to consider maintaining quantity structure in SAP for the finished product, so that cost roll up happens with cost components.
    Hope this helps.

  • Is anyone else getting the " itunes encountered a problem and needs to close " message on xp

    is anyone else getting the " itunes encountered a problem and needs to close " message on windows XP

    I did get a "server busy" message when I loaded quicktime, but I'm not sure if it is related or not since I've been seeing that over the last couple of days, I can't remember if it came before iTunes stopped working or not. That message reads "This action cannot be completed because the other program is busy. Choose 'switch to' to activate the busy program and correct the problem." My options then are to choose switch to or retry. When I press "switch to" my Start menu opens, and nothing appears to happen when I select retry.
    that's an odd sort of a message (or series of messages).
    hmmmmm. let's try an experiment aimed at working out if there's a program interfering with the QuickTime (which is in turn causing grief with your iTunes).
    try a selective startup using MSCONFIG, with just the itunes and QuickTime background processes enabled, as per the following document:
    Using MSCONFIG to troubleshoot conflicts in Windows
    does QT open without the strange message after the selective startup?
    does iTunes launch properly?

  • How to transport the validations, assignments, named searches, and workflow

    Hi Experts
    How to transport the validations, assignments, named searches, and workflow
    between two repositories.
    Thanks
    Vickey.

    Hi Vickey,
    In MDM 5.5 you can use the Archive /Unarchive option for it
    You can refer the below link:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20751e78-f81f-2a10-228f-eb3a16421b4d(Export/Import Schema)
    Note:Export/Import schema can also be used for Transportation in MDM however as of MDM 5.5 the maps,validations and workflows cannot be transported.
    From MDM 7.1 version onwards you can use the Export/Import Schema as well
    You can refer the below link:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0dd1ae0-36e5-2b10-f8b4-e6365e643c0b
    Hope It Helped
    Thanks & Regards
    Simona Pinto

  • I just downloaded more then 2000 photo's from my camera into iPhoto. Shortly after that my battery life was depleted and so I plugged the computer back into power and after I opened iPhoto later, I could not find those photos anymore

    I just downloaded more then 2000 photo's from my NIKON camera into iPhoto. Shortly after that my battery life was depleted and so I plugged the computer back into power and after I opened iPhoto later, I could not find those photos anymore!! Help where are they? How can I retrieve them or are they lost???
    Please help me!!!

    Do you see more photos, when you enable "Hidden Photos" in the "View" menu?
    And that was afetr I took the connection with the NIKON out of my laptop.
    Check, if you really imported into your iPhoto library - is the preference setting "Advanced > Importing: Copy items to the iPhoto Library" active?  If not, connect your Nikon again - do you now see more photos?
    If you imported into the iPhoto Library, check inside the package:
    Select your iPhoto library in the Finder, ctrl-click it, use the command "Show Package Contents".
    There will be a folder named "Masters" inside, with subfolders named by year - month - day. Look for the date you did the import and check, if the photos are inside.
    If yes, copy this folder to a folder on your desktop to save the photos.
    If not, search for a folder "Importing" inside the library. Is it there? Then copy these photos to a folder on the Desktop.
    If you found your photos, backup and rebuild your library.
    See Old Toad's post here:  Rebuild iPhoto Version 11

  • How to transport the DATABASE TABLE  into  the Test system ?

    Hi Experts,
    I am working on BI7,  I had created Database table in BDV system using SE11. Tech_name is ZGLACC_TEMP. I had activated it. I had used this database table for the purpose of  writing the start routine in the transformation. while I am transporting the transformations to the test system, It is showing as syntax error in ABAP program,
    In BDV system there are no syntax errors. it is working fine,
    So now I have to transport the database table to test system  so that I can transport the transformations into Test system without any error.
    Kindly anyone can give the answer , it will be appreciate and points will be assigned.
    thanks
    sekhar

    Hi Sekhar,
       Go to SE11, go into the change mode of your table and change the Object Directory entry (Goto -> Object Directory Entry) to some valid package (other than $tmp). Then it will ask for a transport request. Give a transport request and then I believe you know what to do with that transport.
       Another thing to keep in mind ... transport all the data elements and domains you have created for this table. Change their Object Directory Entry and assign them to the same transport request.
    Best regards,
    Kazmi

Maybe you are looking for

  • Mobile VI Front Panel Display issue

    I am not sure whether I should report this as a big of Mobile Module, so post it here and see if anybody else encounters the same issue.  When create a mobile VI, if you put a TCP Connection control and String array on the front panel the same time,

  • Forum oddity, w.r.t high resolution screen.

    I started a thread on Windows/ Photoshop entitled "CS4 with a high resolution screen". People have replied to this, according to e-mail direct response. However, it is not on the list of forums, and neither does it appear on 'search'. To repeat: we h

  • I had PSE 12 installed on my Mac that died a sudden death yesterday.

    I had PSE 12 installed on my Mac that died a sudden death yesterday. I can't find anywhere to download 12....everything takes me to 13. After spending $$$$$$ on a new computer, I can't outlay another $79 to upgrade to 13. Anyone have any advice for m

  • Warehouse Stock

    Hi Frds What is the table and field name of the Warehouse Stock of Material ? Thanks Pari

  • How often are the maps in the Maps app updated?

    The Maps app couldn't locate a 2 well known stores right off of the highway that have existed for well over a year, possibly 2.  The location is seen in the iOS 5 Maps, but there's nothing but an empty location in the iOS 6 app.  How frequently are l