Is anyone have a problem with share function in FCP?

I am having real problems with FCP 7 "Share" function. It does not allow me to use it. And when I send to Compressor that does not work either. Help any one?

here it is.

Similar Messages

Hello i have a problem with onfocus function on ipad. i am trying to bring my cursor on a text box on a button click. It works fine with safari web browser but not on ipad. Need a solution.

Hello i have a problem with onfocus function on ipad. I am trying to bring my cursor on a text box on a button click. It works fine with safari web browser but not on ipad. Need a solution.

I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck!

Does anyone have a problem with a computer virus?

This is my third attempt at posting on the forums. I hope it works this time.
Hello to everyone.
I have a Sattelite L455D. I got it last November. It was included in tuition for my online classes at Dawn Career Institute.
Last weekend the computer got a virus. toshiba did recovery and it was fine but yesterday it got another virus and they had to do recovery again.
The virus is the type that try to get yiour passwords and credit card info. The Norton Security also found a tracking cookie that they fot rid off. I don't know if that is the same thing.
The computer is fine now but the security thing said it blocked an attempt to attack my computer.
Does anyone else have a problem with viruses? I would like to know what is causing it.
I am not going on any sites that would cause a problem. I know not to open spam email if I get it.
I don't go on any sites that I have not gone on on a Public computer at the library or someone else's house.
The main sites I use are the school site, my Comcast email, Facebook and Youtube.
I took all of my applications off of Facebook. I play Cityville with some friends and family but alot of people play that though.
I had my resume on Careerbuilder but had to take it down because of getting alot of email about scam jobs. Could it have come from that?
I really would like to know what is causing this. I am very carefull on the computer. I am being extra carefull now.
My Security trail ends in a month and I am afraid the virus will keep getting back on after that. I don't have the money to pay for it myslef right now untill I am done school in August.
This is the first time I have ever had a home computer and I like having one because it is easy to do my schoolwork but I am getting tired of having to do recovery becuse of getting a virus.
Any ideas or sugesstions would be appreciated.
Thank you.
Solved!
Go to Solution.

KHoffman wrote:
I will try the Microsoft Security Essentials instead of Norton.
When you uninstall Norton you might want to also use the Norton Removal Tool to uninstall NAV remnants that might be left on the system. It's a free d/l and available from the Symantec Website.
Just so you know MSE real time detection isn't that good. It sometimes allows malware to get onto your system. If MSE does allow malware onto your system it may be able to clean it during a scan. You have to keep your definitions up to date and run full scans manually. It isn't that great but what do you want for nothing.
There are other free antivirus programs available for d/l at CNET: AVG, Avira, Avast, Comodo, etc. They're realtime detection is better but they also use more system resources. AVG has a link scanner feature. Reviews of these programs are available on You Tube and other sites. There are also free scanners you can install to run AV scans on the fly. They can provide a second opinion and can also be useful for cleaning the system of malware: Malwarebytes, SuperAntispyware. They have to be uninstalled when your done or they might confilct with your antivirus programs realtime detection and cause slowdowns, etc. Gmer is free and is used to scan and clean the system of rootkits. There are also some utilities you can use to help see what might unexpectedly be running on the system: Task Manager, System Configuration utility, and the System Information utility are built into your OS. Process Explorer, HighJackThis, ShellExview are also free programs. CCleaner is free and it helps to rid the system of temporary files, cookies, and useless registry entries.
Use Windows Update and the Java Control Panel to make sure your system has the latest patches, and Java version and update Adobe reader. The Java Control panel allows you to delete temporary Java files.
MS has been using Active X and JAVA script for years and the software has always been exploited by malware through email, attachments, web pages and links.
http://www.microsoft.com/security/family-safety/default.aspx#Internet-use

Anyone have a problem with the HDMI port suddenly not recognizing any digital source imput signal?

I have an HP 2711x monitor.
Anyone suddenly have a problem with it no longer recognizing any digital source input with the HDMI port (or DVI), yet the VGA port works fine?
Thanks.

Hello Largelee,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues with your HP 2711x Monitor not displaying HDMI or DVI inputs, yet it can display VGA inputs. Are these inputs all coming from the same device? Such as your computer? Does the computer's outputs show up on other devices via HDMI and DVI? If it works are you using the same cables? Are there any messages displayed on the monitors screen when you have the HDMI or DVI hooked up?
Check to see if any of the documents below pertaining to the HP 2711x Monitor pertain to your issue:
Flat Panel Monitor Displays Message about No Signal, Signal out of Range, Sleep, or Power Save
'Input out of Range' Error After a Recovery or Upgrading to Windows 7
Monitor is Blank
Please respond with the answers to these questions so I can further assist you. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Has anyone have any problems with 5s "sticking"?

Has anyone had any problems with the 5s iPhone "sticking"? It's happened to me twice where I press the home button, and nothing happens.

Yes. Very sticky. especially the first time you go to click it after not using it for a bit. Mine feels similar to if there were crumbs underneath, or parts crunching together.
I just got off phone with Apple. I thought it was my imagination and being too sensitive until just now seeing other posts having same complaint. Apple rep on phone said it was not normal and for me to get it swapped out.

Does anyone have a problem with the ipad air screen?

I bought an ipad air last week and the left edge of the screen was darker than the other side. It was obvious so I just returned it and bought a new one since the store didn't have the same style in storage. I bought another one from another retailer, and just found the same problem, but not as serious as the former one. So I just took it back to the store the next day and exchange another one. Unfortunately, the third one had the same problem at the up-left corner of the screen. I admit that I am picky, but I think I pay this amount of money so I deserve perfect screen. If the brightness of the two sides is different, I dont think it is a product of good quality.
Just want know if anyone else have the same problem with me. Or you just can bear the small diffrence of display. BTW, in China, it is reported spreadly that the ipad air screen has a problem. They even generalize the serial number for problematic ipad air.

Yep. Many quality control problems. The new mini has fewer issues. No problems with older models.
Steve Jobs, where are you when we need you!

Does anyone have a problem with Tweetdeck?

I uninstalled TweetDeck & Adobe Air, and reinstalled but it still didn't work.
It launches a blank page.
Tried googling online and no one seems to have an idea what the problem or solution is.
I run on OS Lion 10.7.1 . Didnt have this problem when it was Snow Leopard.
Help!

Yes, I had same thing happen. There is some notice buried in their not-so-clear help page that says there is some problem with Adobe Air. I ended up deleting tweetdeck and using seesmic as a substiture but now that no longer works. I posted a question here asking if anyone can recommend a working replacement.

HT1918 Anyone have any problems with card information not changing?

I am having so many problems with changing cards and having the information stay when I change it. It NEVER stays changed on the PC or my Iphone. Then I get contact assistance for help. Does anyone have a suggestion or have had similiar problems???

The phone goes on the charger at night every night and is at 100% when I am up. The only thing that I use it for is calls e-mail and an occasional Text. I don't; use for music or movies or anything like that. I do play solitaire on it but that hasn't been a problem up to now. I went in and googled the iPhone 6 for power save settings and it gave me a way to look at the Activity.
The only thing that was used that day was Solitaire. I turned off Cell access to Solitaire and it seemed to last a little longer. I just turned it back on to see what happens.
Ricardo

Anyone have a problem with the iPhone 6 freezing when you're trying to send a text?

I seem to be having a couple of problems with the iPhone 6 or possibly the update 8.1.2. Sometimes when I turn the phone horizontally to text, nothing happens and it only works if I turn it back vertically. Also, sometimes when I receive a call from someone who is already on my contact list, only the number shows up and not the name or picture connected with that contact. It appears when I answer, but sometimes I don't want to answer if I don't recognize the number.
Anyone else having these issues? Do we need another update to the software to fix these problems?

How much available storage do you have on your iPhone? You can find this at Settings>General>Usage
If your available space is measured in megabytes (MB) then it is causing problems for your phone's operating system.
If your available space is measured in gigabytes (GB) then that isn't the source of the problems and you can move to some other troubleshooting steps. First, try a simple restart (holding the sleep wake button for about 5 seconds until the power off slider appears).
If the problems reoccur after you've restarted the phone, I recommend Reset All Settings, which is located in Settings>General>Reset

Anyone have a problem with Photostitcher 3.2 from Canon

I have a problem when I go to launch Photostitcher it gives me the following
Program stopped unexpectedly error.
Process:         PhotoStitch [2686]
Path:            /Applications/Canon Utilities/PhotoStitch/Program/PhotoStitch.app/Contents/MacOS/PhotoStitch
Identifier:      com.canon.PhotoStitch
Version:         3.2.2.21 (3.2.2.21)
Code Type:       X86 (Native)
Parent Process: launchd [105]
Date/Time:       2011-07-03 09:11:43.781 -0400
OS Version:      Mac OS X 10.6.8 (10K540)
Report Version: 6
Interval Since Last Report:          102744 sec
Crashes Since Last Report:           4
Per-App Interval Since Last Report: 40 sec
Per-App Crashes Since Last Report:   3
Anonymous UUID:                      712BFA00-31DC-4B51-836D-F4A05827627C
Additionally absent a solution for this problem I am looking for a good piece of software to combine multiple photo's into a single panaroma. Does anyone have a suggestion? Let me know any ideas would be greatly appreciated.
Jon McCloskey

Thanks for the help. I was able to find an updated version on Canon's Websight. For anyone else who may need this.... here is the link from here I was able to download a new version and it works
http://www.usa.canon.com/cusa/support/consumer/digital_cameras/other_powershot/p owershot_sx10_is#DriversAndSoftware

Does anyone have a problem with the code window not showing code?

I am having a problem with this update where the code window is blank and where I cannot add anything/ The text does appears in the design or live window.
I just use DW to format text that will go into Edge Animate.

Hi,
Are you getting this issue on all the files?
Please share any screenshot.
Regards,
Devendra

Does anyone have any problems with Microsoft Messenger

Hi everybody
My Microsoft messenger was fine till about two weeks later. It keeps signing out all the time and its a real nuisance. Does anyone else have this problem, why is it doing it
Anybody no any alternatives, where you can still have all your msn buddies on it.
Thanks guys

Since Messenger is not an Apple product, you should probably post your question on Microsoft's own forums for the Mac products:
http://www.officeformac.com/productforums/

Does anyone have a problem with opening PDF files in iBook after updating the program recently

I need to try to open the pdf file a few times before it goes in iBook.
It is making me look like a fool cos I use iBook for my presentation to my clients

I'm presumably having a similar problem with pdf's in ibook. It seemed to work fine until about two updates ago. We're using ipad II's with ibook (latest version as of today) for our board of director's reports. These are sometimes several hundred pages and password protected pdf's. Now the more whiney members of the board are *******' at me, so I need to find a solution relatively quickly. Is there a way to back off the updates?
What it does.
When a PDF is chosen to open from the library, ibook open a "blank" file -- showing only the ibook background.
One can try closing and re-opening the PDF and after three or four times it'll open -- seems to be random.
These PDFs are created in Adobe Acrobat 9.

Anyone have this problem with 7.6 update?

I updated to Itunes 7.6 and plug in my phone and... Nothing happens. The phone is charging off the usb port but that's it. No sync. I tried trashing Itunes and the associated library extensions and packages and reinstalling and get the same problem.
Any help would be appreciated.
ps The phone works fine, just won't talk to the computer.

Hi- EXACT same problem I am having since 5pm NY time... just posted the exact same question- no answer yet..i talked to the apple people 4 times and after uninstalling and reinstalling 4 times an apple rep told me it sounds like a problem with the updating of the itunes... he said to wait until tomorrow...uninstall everything again (itunes, quicktime,apple mobile, apple software update) and reinstall...i hope it works...if you do find a solution please let me know...

Does anyone have a problem with upgrading Macbook Pro late 2011 hard drive to a SSD?

Hi Guys i am planning of upgrading my hard drive on my Macbook Pro 15" late 2011 for a SSD, does any one have any problems while doing this, i was told in some cases the mac loses the avility to go to sleep and etc, i would appreciate any come that you may have in this subject.
Also can any one recomend a good cheap SSD for my mac, i am looking at the crucial version, it appears to be ok.
thanks guys

I believe they are up to 2TB in the 2.5" laptop drives.
Do a quick google on the brand & model first to see what the reviews are and failure rates.
I use Hitachi in mine.
SSD's are also an option for you. These are much faster than the traditional mechanical drives, but also much more expensive & are much smaller in capacity.
Here is a link that gives you some idea of options.

Is anyone have a problem with share function in FCP?

Similar Messages

Maybe you are looking for