Is anyone having a problem with the 3G on the new iPad 3rd generation?

I took my SIM from my iPad One (where it works perfectly) and transferred to my new iPad Third Generation, but even though it shows a full signal the speed of the 3G is very, very slow. Most web pages never finish loading. I contacted Apple and they say it's a hardware fault, and are sending me a replacement iPad. I wondered if anyone else was experiencing this issue?

If you believe that your device has a defect or malfunction, contact Apple now.  This forum is not for taking polls.  Contact Apple for support options.

Similar Messages

  • Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

    I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
    I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged. 
    I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
    The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
    If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

    Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
    Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
    Thanks again!

  • I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

  • I am having email problems with the new Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help

    I am having email problems with the new Mountain Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help
    Incoming Mail (IMAP) Server - requires SSL:
    imap.gmail.com
    Use SSL: Yes
    Port: 993
    Outgoing Mail (SMTP) Server - requires TLS:
    smtp.gmail.com (use authentication)
    Use Authentication: Yes
    Use STARTTLS: Yes (some clients call this SSL)
    Port: 465 or 587
    Account Name:
    your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
    Email Address:
    your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
    Password:
    your Gmail password
    The Quick Answer
    Follow the instructions below to set up IMAP1 access in most email clients.
    Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
    this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option?  The next page under ADVANCED: THERE IS A BOX SSL MARKED.  Then IMAP Path Prefix - I put stmp.gmail.com.. is that right?  Port 993 can  use this one? as 456 doesn't work and 587 said it wasn't safe.  Under AUTHENTICATION I used PASSWORD.  Should I have used external client cert TLS?
    Please help me set this up securely. Thanks

    Apple - Support - Mail Setup Assistant

  • Is anyone having volume issues with the new Iphone 4S?

    Is anyone having volume issues with the new Iphone 4S?

    Yes, the volume on my iPhone 4s will max out without me touching any button or setting.  When opening mail, for instance, the ringer icon will appear and the volume level goes to max volume - and I'm not touching the volume buttons.  It seems to happen randomly, at least I can't identify a pattern, but thankfully it doesn't happen all the time, but at least once a day.  
    Anyone else seen this?

  • What's the best cover for the new iPad (3rd generation).  I've been told by a store employee (university bookstore) that there are problems with the magnetic covers on the newest iPad. Suggestions?

    What's the best cover for the new iPad (3rd generation).  I've been told by a store employee (university bookstore) that there are problems with the magnetic covers on the newest iPad. Suggestions?

    The best cover is the one that suites your needs. Try Google. There are dozens on the market.
    As for the Apple Smart Cover, it does work with the new iPad. There are a few reported issues with it, but that doesn't come close to representing the totality of folks with it.

  • Does the new ipad (3rd generation) has the Siri function?

    does the new ipad (3rd generation) has the Siri function? How can I find it in my Ipad?

    Not at this Point. When iOS 6 is released, it will be available for the new iPad then ... Coming this fall.

  • TS1702 Is anyone having a problem with the smurfs app

    Just wondering if anyone is having problems with the Smurfs app.  Click on it to open it, it opens & then shuts down almost immediately.  Can anyone help?

    Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
    Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
    Thanks again!

  • Is anyone having a problem with the home button on a 6?

    when I first got my iPhone 6, the home button was just like my other iPhones have been, my iPad, my sons iPhone 6, etc. when you pushed it, you can feel it move and you feel a little dull clck. Now the the home button on my iPhone 6 has no movement or click. It still functions, but I'm worried it is on its way to failing and if I wait to address the issue until it completely fails, then it will be out of warranty. Has anyone else experienced any problems with the home button?

    If you believe that your device has a defect or malfunction, contact Apple now.  This forum is not for taking polls.  Contact Apple for support options.

  • Does anyone else have problems with the new macbook pro trackpad?

    I exchanged my new macbook pro last week because there was a major trackpad lag. Every time I put it to sleep and woke it up, the trackpad would delay 5 or more seconds. I took it in to the Apple store and they said it could be a software issue and I exchanged it. However, I just opened up this one up from the package today, and there's still a lag. Does anyone else have problems with that? I don't want to exchange it again, so is there something I can do?

    Also, is it mandatory to run software updates when you first turn on your computer?

  • Google Street View not working on the new iPad (3rd generation iPad)

    Trying to use Google Street View in Safari is crashing in the new iPad. Here's a link for reference: http://maps.google.com/help/maps/streetview/mobile/gallery.html#!/id=258
    The same thing works fine in iPad 2. Has anyone faced similar problems? Is there something I can do to fix this issue?

    That link works for mee on my new iPad.
    Try using Settings -> Safari -> Clear Cookis and Dara

  • Anyone else having WiFi problems with the IPod Touch 5th Generation?

    I upgraded my old IPod Touch 3rd Generation to a 5th Generation yesterday. I've noticed however that for some reason the wi-fi connection on the 5th Generation drops off all of a sudden for no reason at all and I can't figure out why. Anyone else having similar problems? If so what did you do?

    Does the iPod connect OK to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect OK?
    Did the iPod connect before?
    If only your network then it could be a problem with your network
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Photoshop Elements 8 - is anyone having a problem with the screen color ?

         I just installed Elements 8 & the screen color has 2 choices:
    DARK (Black screen with Black & Grey text)
    LIGHT (Dark Grey screen with Black text)
    BOTH of these are VERY difficult to read & some text just dissapears into the background.
    After speaking with the tech at Adobe, these are the only 2 choices (Dark & Light) I have.
    Neither choice is worth the eye strain.
    Is anyone else having the same problem ?
    Has anyone found a solution ?

    Thanks again. I use 125% on a 23" widescreen Acer monitor. The menus display on both the PSE7 and 9 Editor but not on the 7 or 9 Organizer. For both Organizers, I get a blank space where the menu should be - and at the right of that space, the tiny, double-arrow drop-down is nearly invisible. On 7, I slid the Edit/Preferences/General/Appearance/Brightness control to the far right in order to see the drop-down arrows. But even so, clicking the drop-down then scrolling down to select the desired menu is a nuisance. On Organizer 9, I have not been able to find any Brightness or other window-color adjustment in Preferences or in any menu option, so the drop-down arrow is extremely difficult to see. Even if the menus were visible, as with the Editors, the dark grays and blacks of the windows strain my eyes. PSE has some great features, and 9 is beter that 7, but I don't want to use a photo editing app that is visually difficult to navigate. Please let me know if there is a fix for the menu display or the window brightness/color.

  • Anyone having a problem with the latest number software. Docs do not open Invalid. The index .xml file is missing?

    I have been having problems since updating to the latest version of Numbers.
    When I try to open files I am getting an error.
    "The document “'13 Tax Prep .numbers” is invalid.
    The index.xml file is missing."
    Anyone else getting this message? Anyone know how to fix the issue?

    Jeff Shenk wrote:
    Numbers 3.1 can recognize both the new files without the index.xml file and the old ones with it, which it imports to the new format.
    Agreed on that part.  But take it a step further.  If Numbers 3.1 is asked to open an old document that is still in the old Numbers 2 format that relies on an index.xml file but Numbers 3.1 can't find the index.xml file (perhaps the document is corrupted) then how can Numbers 3.1 open the document and interpret it in order to convert it to the new format? My guess is that this a possible trigger for the 'index.xml missing' error message.
    Interesting link here on the new document format.
    SG

  • Is anyone having problems with the new ipad staying connected to wi fi

    My new Ipad 4G + WI FI keeps losing the connection to the internet.  I have to continuously type in the password  to our WI FI.  Is anyone else having this problem?  I didn't have it with the Ipad 2.

    Search before posting please:
    https://discussions.apple.com/thread/3812929?tstart=0

Maybe you are looking for

  • Plethora of problems on brand new mid 2010 13" MacBook Pro

    This computer is about a month old and has been behaving very strangely since just a few days into its life. Symptoms: 1. Computer would freeze or otherwise become unresponsive after being woken from sleep. 2. Music would keep playing long after iTun

  • FCC Receiver side

    Hi Experts, Im working with the file to file scenario with FCC receiver side parameters ( sender xml with receiver text). I want my fields with comma separated values...like... abc,xyz,mno.. so on... Im giving the parameters as : HEADER1.fieldSeparat

  • Can i have a new tab in firefox open to my home page

    When I open a new tab I want it to open to my homepage, how do I do this? Thank you, Taammi

  • Why are my files no longer downloading?

    After converting a PDF into a word document; when I try to download the file nothing happens. So I click on the files tab and select the document I want to download and I get a messsage saying files not found. Why are my files no longer downloading?

  • XY Buffer for 2 points

    I am trying to plot two counter vales (acquired one point at a time from a DAQ card). Using a single XY-Buffer works well, but I cannot seem to show both counters in a single plot. Can someone tell me how I solve this problem. On the same question, i