Is anyone having issues with colored lines streaking through image of camera on ipad air?E

Today when using the camera on ipad air the screen became filled with red green and blue streaking lines. When a photo and video was taken the lines were part of the recorded images. The problem is not evident if the cameras are switched and the camera on top is used. The ipad is only a week old having been given for Christmas. I have tried turning the device off as well as resetting it but no luck.

Hi Eshylie,
Thanks for visiting Apple Support Communities.
If you see colored lines on pictures taken with the rear camera, and resetting the device didn't resolve it, I recommend backing up and restoring the iPad Air next:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Best,
Jeremy

Similar Messages

  • Anyone having trouble with the recording function on the rear camera on iPad ios7?

    The rear camera shows while I'm recording video but I'm just getting sound when I play it back.

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

  • Anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

    Urgent please
    anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

    Sounds like the folder Write permissions issue described here with a solution:
    "Some import operations were not performed" from camera import

  • Anyone having issues with facetime fail on iphone 4 or macbook pro?

    Is anyone having issues with facetime fail on macbook pro or iphone4?

    Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page.
    http://www.apple.com/support/systemstatus/

  • Is anyone having issues with imessages disappearing or not being delivered?

    Is anyone having issues with imessages disappearing or not being delivered?

    I too am experiencing this on my iPhone 4 after upgrading to 4.3.3. I am fairly convinced that it is a software issue. The last update seems jumpy. There appear to be more pauses and stuttering with screen changes too.  Sometime the button operates perfectely (even with repeated light touches). Other times, it doesn't matter how hard I press; it takes several presses. I notice it more when i am using a battery case or connected to an AT&T MicroCell. I am having a hard time pinpointing problematic apps, although i suspect that mail with my work Exchange account may be a culprit. I suggest posting your issues on Apple's iPhone feedback page, www.apple.com/feedback/iPhone.html, to ensure that they are looking into this problem. If it is a hardware issue, I'll be pretty upset as I received my iPhone 4 on day 1 of availability and it is out of warranty. Hoping for a fix with an update. Please post on the feedback page.

  • Is anyone having issues with getting apps.

    Is anyone having issues with getting apps? It keeps taking me to my billing info for some unknown reason. it says (invalid address) when I try to purchase or update apps. Anyone got any answers to help me please??????

      YES I TO THOUGHT I HAD DONE SOMETHING TO MESS MINE UP, AND TRIED FOR 2 DAYS TO GET AHOLD OF SOMEONE TO SEE IF MY CC INFO HAD BEEN HIJACKED BUT WITH TODAY'S SO CALLED TECHNOLOGY YOU CAN NOT TALK TO A LIVE PERSON WHEN DEALING WITH ITUNES SO IT DOESN'T MATTER WHAT HAS HAPPENED YOU WON'T EVER REACH ANYTHING BUT YOUR OWN COMPUTER..LOL
    AFTER I FOUND THIS SITE I SEEN THAT NOT ONLY I AM HAVING THIS SAME PROBLEM, MANY , MANY MORE ARE SO I GUESS WHEN APPLE HAS DECIDED THEY HAVE LOST ENOUGH $$$$$ THEN THEY WILL FIX IT... GOOD LUCK TO YOU!!!!

  • HT4972 Is anyone having issues with facebook on iphone 3?

    Is anyone having issues with Facebook and iphone 3?

    If you're using IOS 4.2.1, you can not download facebook. I have had the same problems and now just use safari to go on facebook. Hope this helps

  • Verizon iPhone 5, 64GB black - is anyone having issues with a very choppy conversation while talking on the phone.  Both my wife and I have the same phones and are both having the same issue.  We can only hear every other word.

    Verizon iPhone 5, 64GB black - is anyone having issues with a very choppy conversation while talking on the phone?  Both my wife and I have the same phones and are both having the same issue.  We can only hear every other word of the person we are talking to.  This happens at home, on the road and in the downtown area while calling both cellphones and landlines. It is intermittent, so we don't know exactly when it will reoccur.  Absolutely no problem with data.  The data speed is great.

    "Wireless devices use radio transmissions, so unfortunately you can't get Service if your device isn't in range of a transmission signal. And please be aware that even within your Coverage Area, many things can affect the availability and quality of your Service, including network capacity, your device, terrain, buildings, foliage and weather."
    Customer Agreement | Verizon Wireless
    While there may be an issue in your area, it is suggested that you don't use wireless service if it's a life or death situation, such as the one you've described.

  • Hi All.  My iPad 4 just started having issues with the volume.  On either Bluetooth or the iPad Speaker, anything I'm watching or listening to drops the sound to just barely hearing it and then, about 2 seconds later, it comes back.

    Hi All,
    I tried to search through the community, but with the sheer volume of posts, I didn't find anything that seemed like the same issue.
    My iPad 4 just started having issues with the volume.  On either Bluetooth or the iPad Speaker, anything I'm watching or listening to drops the sound to just barely hearing it and then, about 2 seconds later, it comes back.
    I haven't tried wired ear phones, but I am sure they'll be the same way.
    It's very random, but consistent enough to happen several times per day.
    Thanks for any help that anyone can provide.
    I have restarted it and also did a Hard Reboot and it didn't help.
    Thanks Again,
    Scott P.

    Well there you go, when you advertise it just be sure to say that you can't even see the scratches at half brightness and see how it goes.
    Of course you are saying you want $500 for one with many scratches on the screen, has been dropped, but the scratches aren't visible at half brightness, and has no warranty. Or I can buy a refurbished iPad 4 WiFi 32 GB directly from Apple with no scratches and a one year warranty for $499. http://store.apple.com/us/product/FD514LL/A/refurbished-ipad-with-retina-display -wi-fi-32gb-white-4th-generation
    Why would I buy yours?
    I wouldn't pay more than $300 for a used model with your specs in perfect condition. But yours is far from perfect. I think your high point is $250 which is why I said 50%.

  • Is anyone having issues with Android version 4.3 for Galaxy III throwing in zeroes into text messages?

    I received a message on Christmas Eve that a free update was available for my Samsung Galaxy III.  I accepted the download and discovered some enhancements and fixes that I liked (finally, my voicemail icon displays the number of waiting voicemails that I have!) but I've noticed to glaring issues:
    1. When I send text messages that include numbers (a phone number for example) the OS throws in random zeroes into the number.  I have to usually touch the ENTER key and type the number on a new line and play around with it until the number stays in the message correctly.
    2. I've had occasional lockups using the media hub which, when I do a restart, causes my settings to revert to the default factory settings....kind of a pain.
    There may be other issues. 
    Q. Has anyone out there experienced this same thing?
    Q. Is Google going to fix these issues?  I noticed that on Christmas day a half dozen or so updates were made, but these to things still are a problem. 
    Q. Also, the Verizon Wireless Software Upgrade Assistant on my laptop insists that my version is not supported.  I can still access photos and music, but it's a little annoying...

        I'm sorry you're having issues with your phone after your update BigLouie1124. I recommend enabling safe mode to see if any of your apps are causing issues with your new software. If so, you can remove them. Here are the steps http://vz.to/1cD0kqT . If you continue to have issues the last step would be a factory reset to clear up some of your issues http://vz.to/JCsr33 . Please keep us posted and continue to clear unwanted message threads and clear your browser history periodically.
    KinquanaH_VZW
    Follow us on Twitter @vzwsupport

  • Is anyone having issues with icloud?

    I log in just fine but when I click on contact it gives me an error.  Anyone having issues?

    The inability to log into iCloud.com (sporadic problem), can’t use Contacts, Calendar, Notes, etc. (consistent problem), can’t send error reports (consistent problem) from a Windows PC seems to be a common problem.
    My recommendation is to download Apple’s Safari version 5.1.7 for Windows to access iCloud.com. It consistently works for me!!!! To make things easier with Safari, I made iCloud.com its Homepage. I’m using it to access iCloud.com from all of my PCs.
    On my Windows 7 systems it appears that some add-ons are causing problems when you try to access iCloud.com with the 32-bit version of IE9, but the 64-bit version seems to work fine, more than likely because there are few add-ons that are 64 bit and the 64-bit version can't be the default browser in IE9.

  • Anyone having issues with InDesign (CS5) and Suitcase Fusion 3 (Mac)?

    I've run into a problem that I think might be caused by Suitcase Fusion 3 [Version 14.2.0 (319)], but I'm wondering if anyone here is having any issues with InDesign and Suitcase Fusion like I am?
    Just about every time I launch an InDesign document or an Illustrator document (don't seem to have the issue in Photoshop, strangely enough) it pretty much crashes to the point where it's a force quit. Before anyone asks the question, this is what I've done - I've reformatted my hard disk (even writing 0s!), done a clean install of Lion (10.7.3), clean install of Creative Suite 5 (and updates), clean install of Suitcase (and updates)...you get the idea. I'm still ending up with crashing just about every time I open a document in these two apps.
    As an experiment I downloaded a (fully functioning) trial version of FontAgent Pro (which I didn't like, btw) and didn't encounter any crashing at all in either application.
    I've opened a ticket with Adobe to see if they have any details as to whether this is a known conflict or whatever (though I don't hold much hope for getting help from them since it's looking more like a Suitcase issue than a Creative Suite one).
    Does anybody have any suggestions as to what I can do to try and resolve this?
    I'm in the middle of producing two magazines and I really really don't need this! Lol

    From the lovely people at Extensis tech support -
    Thanks for the info. As you said, if this is happening when you have only manually activated fonts, then the auto-activation isn't coming into play which does lead me to think it is related to the plug-in generally and maybe the sleep issue, which you say you definitely have. So I've added you to the sleep issue tracking.
    If you find yourself coming back from putting the computer to sleep and the apps with Suitcase plugins have hung, do this:
    1)      Go to your spotlight and type in "activity"
    2)      Launch "Activity Monitor"
    3)      Highlight the name of the adobe/quark application that is hanging by clicking it.
    4)      Click the "Sample Process" button at the top of the screen.
    5)      Click the "Save" button.
    6)      Click the "Save" button again and save the file to your desktop.
    7)      This will generate a file such as " Sample of Adobe Illustrator CS5.txt"
    8)      Repeat this process with any other application that is hanging.
    9)      Highlight the "FMCore" process by clicking it.
    10)  Click the "Sample Process" button at the top of the screen.
    11)  Click the "Save" button.
    12)  Click the "Save" button again and save the file to your desktop.
    13)  This will generate a file named " Sample of FMCore.txt"
    14)  Place these files along with the ".Plugins.txt" files created earlier into a new folder called "Plugins"
    15)  Right click (control+click) to compress into a .zip file.  
    Please attach this zip in reply to this mail.
    When we are sure of a fix, we'll get back to you. In the meantime here are some workarounds:
    Option 1:
    1)      Back up your font sets by dragging them to the desktop
    2)      Remove SF3 v14.2 by following the instructions here: 
    http://www.extensis.com/en/support/kb_article.jsp?articleNumber=4020
    3)      Download and re-install Suitcase Fusion 3 (version 14.0.6) from: 
    http://dl.extensis.com/downloads/ST/EN/M/SuitcaseFusion3-M-1406-EN.zip
    4)      Are there fonts and font sets in your old font vault you would like to recover?
    If NO :
    a)      Open SF3
    b)      Simply drag and drop your original fonts into the SF3 "Font Library". This will copy the fonts into a new font vault.
    If YES : Restore your old fontvault from the backup the removal tool created
    a)      If you choose "Y" to KEEP your font vault earlier when you ran the removal script, on your desktop you will find a folder called "Extensis-Backup-today's date" that contains a backup of your previous suitcase fusion 3 fontvault.
    b)      Move your old font vault from the "Extensis-Backup-today's date" folder on your desktop into this folder: 
    /Users/[your username]/Library/Extensis/Suitcase Fusion/Suitcase Fusion.fontvault
    c)       Launch SF3 from your dock. you should now see all your old fonts and font sets.
    Option 2:
    Remove our auto-activation plugins and activate your fonts manually in SF3 and/or add your adobe/quark apps to the SF3 > Preferences > General > Global Auto-Activation Options list. here's how:
    1)      In SF3: choose Suitcase Fusion 3 > Manage Plugins
    2)      Uncheck the boxes for adobe/quark apps; this will remove our auto-activation plugins
    3)      Choose SF3 > Preferences > General
    4)      Under "Global Auto-Activation Options", press the "+" button to add your adobe/quark apps
    Please note that "global auto-activation" is less accurate than our plugin-based auto-activation. Double check your font usage in your design app to confirm the correct font was loaded after opening a document.

  • Is anyone having issues with 27inch iMac late 2012 locking up when processing photos?

    Purchased new IMac 27 in July 2013 and 15  Macbook Air in November.  I upgraded all my software at the time of the Air purchase.  This is my 3rd  Mac book and second IMac.  Have all the same software on each.  The IMac keeps locking up especially when I am processing in Aperture.  It is worse when trying to move between Aperture and Elements or Big Aperture.  I have not had an issue with Air even when useing same file on same soruce.
    I took the IMac to shop for color bleed in moniter and then kept it a week, tested it, replaced the monitor, but said system is fine. 
    Any one else having an issue.  is it my PC or an issue with the software/Maverick.

    Got a late 2013 iMac 27". No problem at all. Try going to Disk Utility (in applications>utilities) and repair permissions. And then borrow a copy of Disk Warrior and clean optimize your hard drive.
    Within Aperture yourself, do you know how to restore/repair your library? Hold down the apple & option keys and simultaneously start Aperture. You will be prompted on screen. That usually fixes hangups. I do it monthly.

  • Is anyone having issues with printing to network printers with 10.8.4?

    I have upgraded our schools to Mountain Lion. Ever since the beginning of the year we have had issues with network printers. They are all HP printers, when they go to sleep a user has to turn off the printer and turn it back on then resend the print job. Now users are being asked to put a password itno the Print Operator group. This never happened before. Cups is changing the queue names to MCX_1 or 2 etc. Not keeping the queue name. All these people are in WGM and have printers set for their group. So I have reset the printer settings on the machines, then restart relog in and get the list of printers they can print too and within 1 day they are unable to print. I am trying my very best to get this issue fixed and all solutions have been exausted. So without having to go to every computer and going into the Ldadmin group thru a terminal, is there anything that anyone has done to fix this issue with out visiting every computer. Thank you.

    The printers failing to wake from sleep is an issue. A print request should be waking them.
    You have not mentioned what printer server is involved. I could assume it is OS X Server since you mentoned WGM, but it would be nice to have you confirm this. Then I can start to suggest some actions.

  • Anyone having issues with iphone 5 earphone jack? .

    Got my iphone early this week.  When I plugged in my earphone and only 1 earphone is audible.  Apple stored tested it and found it to be defective and ordered a replacement.  I just got a new replacement.  Came home, unpacked the box and tested my iphone 5.  all looks good but when I plugged in my earphone into the earphone jack, I faced the same issue.  Only the right earphone is working.  the iphone 5 earphone works awesome on my ipad and my nexus.  anyone having this same recurring issue?  or it's just a batch manufacturing defect?

    The problem is still going on. I bought the iphone 5 in December 2012. Right earphone doesn't work. Not sure i'm getting right channel through the speaker either. There is not an Apple store here. Will check with Verizon store tomorrow.    No replies?

Maybe you are looking for

  • Mac Book Pro Casing

    My Mac Book Pro was dropped at my 1 year olds birthday party. I told the guy who dropped it, no problem, I'll get it fixed. Thought it would be a few hundred bucks. Took it to the Apple Store. It's a Level 4 issue, $1,100. The laptop still works, but

  • Creating simple shared library using gcc under Solaris 10

    Hi All: I apologize if this is too newbie a question but have seen nothing that works for me yet. I'm trying to create a shared library that contains a single object file using gcc (as installed on Solaris 10). I compiled the source code as follows:

  • Gateway service with multiple entity sets

    Hi, I have designed a Gateway service with 3 entities, and 3 entity sets.Entity sets are not related one to another. This entity sets correspond to static data stored in 3 different custom table in SAP. The aim of this service is to provide static da

  • Using Virtual Key Figures/ Characteristics is possible to use in InfoSets

    Hi All, Is it possible Using Virtual Key Figures/ Characteristics is possible to use in InfoSets? I have tried all the possibilities using the BADI implementation RSR_OLAP_BADI without success. The VKF / Characteristics works fine when it is being us

  • Why some classes are not Cloneable?

    I found the library designers designed some classes that are not Cloneable, such as String,StringBuffer, File, Thread, Socket... Since File,Thread and Scoket contain information of the context, they may not work as expected if I transfer them to othe