Is anyone having playback issues with PPro CC 7.0.1?

Using the same computer and working on the same project, we're experiencing playback that often hangs at cut points. We had no problem playing back on the previous version of CC. Happening on multiple machines in our production studio.

Processor 2.8 GHz Quad-Core Intel Xeon
Memory 20 GB 1066 MHz DDR3 ECC
Graphics ATI Radeon HD 5770 1024 MB
Software OS X 10.8.4
One effect is used on one clip (gaussian blur), everything is rendered, no third party hardware.
Various types of media. .MTS from a Canon C100, 5D Mark III and II, Nikon D700 and DV footage. But again, this all worked fine before the latest update on CC.
Now that I've watched the piece a few times through, it seems to have issues with the Canon C100 footage most explicitly.

Similar Messages

Is anyone having volume issues with the new Iphone 4S?

Is anyone having volume issues with the new Iphone 4S?

Yes, the volume on my iPhone 4s will max out without me touching any button or setting. When opening mail, for instance, the ringer icon will appear and the volume level goes to max volume - and I'm not touching the volume buttons. It seems to happen randomly, at least I can't identify a pattern, but thankfully it doesn't happen all the time, but at least once a day.
Anyone else seen this?

Is anyone having Mic issues with iPhone 5?

Is anyone having Mic issues with iPhone 5? Speakerphone works but not the mic, on phone calls and memos.
Took it to local Genius campus and after taking off the back screen and case, they blew air into the mica and it worked for about 20 mins.
I can't have a ready can of air around every time the mic goes out.
Anyone else had similar issues?

I am having a similar problem. I had the iPhone 5 delivered yesterday. On most of the calls I tried, the person on the other end could hear me just fine on speakerphone, but not on the regular mic. It was garbled, or I would cut in and out. I could always hear the other person clearly.
I just got back from a Genius Bar appointment where they gave me an entirely new phone. The issue exists on this one also, though now it seems like the audio is more muffled than garbled or spotty. Again, speakerphone works, and I can hear the other person clearly.
I had originally restored backup from my 3GS, but before I went to the Genius Bar I restored to factory settings just to be sure it wasn't a software issue (it wasn't, apparently). I did not restore from the old phone for this new handset either.
Thanks for any suggestions...frustrating, for sure!

Has anyone having an issue with the iphone 6 signal cell strength on Verizon?

Is anyone having an issue with the iPhone 6 signal on Verizon?

I'm having the same issue as most of you on this forum. my current OS is 4.3.5 and after a factory reset, the camera started working fine, however, once i done the restore the camera reverted back to the same issue - "the shutter on the screen wont open, and the still/video switch just flashes" - what is more strange is, i have the HP home&biz app installed and this has a camera function and the camera seems to work fine with that, therefore suggesting there is nothing wrong with the hardware and this is a software issue. I'm currently awaiting a member of the Apple support team to call me about this, will keep you posted. BTW - someone suggested, going into Location Services and switching off the camera and apparantly, the issue was resolved for them, unfortunatly, this didn't work for me extremly odd issue indeed!

Is there anyone having an issue with the apple tv when selecting music from the home screen?

Is there anyone in the community having an issue playing music from the home screen of the apple tv? When selecting the music app my apple tv restarts. If anyone else is having the same issue and has corrected the problem please share the solution.

Working fine here, and have not seen any other reports. I would restore your unit
Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

Anyone having font issues with PS CS3 + Snow Leopard 10.6.4?

After installing Snow Leo, PS won't recognize any fonts. I have dumped the cache, soft rebooted, installed all software updates. Anyone having the same issue? Please help!

After installing Snow Leo, PS won't recognize any fonts. I have dumped the cache, soft rebooted, installed all software updates. Anyone having the same issue? Please help!

Anyone having login issues with iCloud system preference ?

have been having issues with Login in to make changes in iCloud system preference. When I click on my icloud account inside systme prefrence it ask me to enter the password , after entering the password still everything is grayed out and cant make any changes. what is wrong?

Same thing happened. It seems to default to another me.com address I had before changing to the current me.com address. Resetting the default keychain exaxtly does what? Does it also remove all other keychain enties?
Thanks

Is anyone having an issue with their iPhone 6 getting hot after loading the iOS 8.1.2 update?

I finally loaded the iOS 8.1.2 update to my iPhone 6 yesterday. I've noticed that my battery seems to be draining faster and my phone is getting really hot if I use it for any length of time. Is anyone else having this issue? Is there a fix? Thanks!

Hi This maybe a Hardware problem make an Appointment at Apple Store They may replace it. Cheers Brian

Anyone having gmail issues with osx 10.9.2

Since upgrading to OSX 10.9.2 I am having an issue retreiving my email from my gmail account. Other email accounts work fine. Can anyone help?

Since upgrading to OSX 10.9.2 I am having an issue retreiving my email from my gmail account. Other email accounts work fine. Can anyone help?

Anyone having font issues with Mavericks?

We just upgraded from 10.6 to Mavericks and now we are having font issues. About half our fonts will not install...having triuoble with all types of fonts, true type, free fonts, adobe fonts, etc...

I had tons of problems, but it will work. I went to adobe troubleshoot fonts mac OSX.
Here is the link
http://helpx.adobe.com/x-productkb/global/troubleshoot-fonts-mac-os-x.html
This should help.

PE 8? Is anyone having an issue with HD editing?

This is my second thread. Sorry if I am being repetitious
PE8 locks up on me when I try to edit video. Im using Vista 64 and the application goes white and says (not responding) I am editing HD m2ts files that are about 3gig. When I edit a small 100meg file it doesn't lock up. I have tried every HD setting to for my project and get the exact same result. Right now I am uninstalling the software, and reinstalling it.
Am I able to get help from Adobe? I tried calling yesterday and was on hold for 45 min before I was cut off.
Someone tell me what is needed to edit HD video...
Here are my PC specs:
vista 64
Intel i7 920
AUSUS P6E Motherboard
6G ram
Nvidia Quadro 1800 diver 191
2 - 500G, 7200rpm Hard Drives
The video came from my Panasonic HDC-HS300 camcorder. I got the files by copy and paste. When I plugged in my camera I treated the camera hard drive like I would any other and located the files and ctrl-c ctrl-v. The files are m2ts.
Info about the file from a program called AVIcodec
File : 2.75 GB (2.75 GB), duration: 0:23:25, type: DSH, 1 audio stream(s), quality: 98 %
Video : 2.68 GB, 16445 Kbps, 29.970 fps, 1920*1080 (16:9), = MainConcept (Adobe2) AVC/H.264
Audio : 64 MB, 383 Kbps, 48000 Hz, 6 channels, 0x2000 = AC3 DVM

Just to give a little update... I have done everything that you guys have told me and have gone through each step of the troubleshoot Freezes... support document. I then called tech support and spent a good hour on line with them and the support supervisor. They are not sure what the details are, but they will elevate it to higher powers.
Being on the phone with tech support forced me to look close at the problems and I have a few opinions.
With a small AVCHD (m2ts) file there are no issues. With a 75meg I could immediately begin to edit once the file is set in the sceneline. With a larger file 300meg I had to wait a min or two and then it worked fine.
However with a large file, 2.75g, there are major problems.
When the file is in the organizer screen there is a process called conforming and then rendering that takes place. With a very small file this is done quickly, with a med size file this is done in the background. The problem is with a large file. Once you move the file from the organizer to the sceneline the process stops and elements 8 locks up. My next step is to load the clip I want to edit and wait for it to conform and try to edit. If that doesn’t work I will let it render and try.
There is an issue with the file size that was not there in premiere elements 7.

Is anyone having an issue with saving Adobe Photoshop files to the server?

Unable to save Photoshop files to the server. Has anyone faced the same problem?

Two options. Doing either one worked.
1st option
In Photoshop preferences under File Handling set Preview to Never.
This has been working for me all day. Maybe a couple of times I got something about not being able to save because of not having access to the file, but then the save as dialog comes up and hitting okay saves the file.
Wasn't a big deal.
2nd option
Create a file (it didn't exist) in the /etc folder named nsmb.conf file, with the contents below.
[default]
streams=no
Here's where I got the info.
http://forums.adobe.com/message/4590780#
Currently I'm doing option one, as it only turns off a feature in Photoshop and doesn't reconfigure anything in the OS.
It's probably just a byproduct of an OS being updated (lots of things happening) and Apple will remedy it in 10.8.1. At least this works for now.

Is anyone having an issue with their iPhone5 where static electricity is cutting calls and launching music??

I have an iPhone 5. I live in Nebraska where it is cold and dry right now and static electricity is everywhere. I use the the original equipment earpods virtually always for calls. Within the last several weeks I've started to notice if I move around in a vehicle, or move about my office or home while on a call, I will sometimes hear a small hint of static through the headphones and then the phone call cuts off or ends and my music player will start playing a song. COMPLETELY ANNOYING. In doing some testing since the issue started, I have experienced this now without the earphones both using bluetooth devices OR just the phone itself. I hadn't contacted Verizon yet, which is usually my first call since it is a corporate phone, and thought I would try the forum first to see if anyone else is having a similar issue. Thanks in advance for any feedback!

I just started having this yesterday. It's only happened twice, but it's annoying. My wife texted me that she was coming home last night, and it showed up immediately on my iPod Touch but not my iPhone. I opened my iPhone and it soon updated. Worked fine after that. Then just a moment ago today my wife texted me and the same thing happened. I heard my iMac and iPod Touch receive the message but it didn't display on my phone until I opened the phone and it showed up again a little bit thereafter. I suppose I'll send Apple some feedback on this issue.

Is anyone having an issue with the hp photosmart premium c310a? I keep getting a "paper jam" error

I hope someone from hp is monitoring these posts. I am very disappointed with the new photosmart premium eAll-in-one. I just bought this printer in april and recently when printing, an error message "paper jam" will pop up after just printing 1 or 2 pages. I did all the recommended troubleshooting steps hp has online but after printing a couple pages error message comes back. And thats not even the worst part! I called hp tonight 4 TIMES to get this issue resolved because at this point I want a new printer sent to me! I have been hung up on 2 times and then told the other times that I need to talk to a case manager. Guess what? No case manager available to talk about my printer issue!! I spoke to 6 different representatives with NO help to be found. I cannot return to staples store where I bought it because its after the 14 day return policy hp has with staples. That is the MOST STUPIDEST policy I have ever heard of!! If I knew in advance that I could not return this printer to the store I got it from after 14 days have passed, I would have NEVER BOUGHT IT!! I am still waiting for a case manager to call me back so that I can get this thing picked up ad a new one sent to me.

Try this:
Apple menu / System Preferences / Network.
Click Location: and select Edit Locations..
Click + (plus sign), and enter a name for the new location - anything will do.
Apply this.

Anyone having an issue with the SD TV show option not working in iTunes Store?

SD TV shows are not available to purchase, I can only get the HD shows. Is anyone else having this problem?

I'm having the same problem and am quite frustrated. I have quite a few season passes for different TV shows, but they are all for the SD versions (cheaper, smaller, and quicker to download). I can get to the TV show's download page, but only the HD version shows up. I can see the button for the SD version but when I click on it nothing really happens, or the only thing that happens is that the "HD" symbol after the name of the TV show at the top of the page disappears. But even though the "HD" symbol next to the TV name is gone, the episodes are all still only available to download as HD versions. The problem isn’t just that it’s only the HD versions that are available but I already paid for the SD season passes. And I'm not going to pay more money to download the HD version, I don't want, just because the iTunes store has a glitch.
So I really hope that Apple fixes this soon.

Is anyone having playback issues with PPro CC 7.0.1?

Similar Messages

Maybe you are looking for