Is anyone having problems with no audio with Bluetooth headphones while using Final Cut Pro X?

I cant hear any audio with my Blue tooth headphones only on Final Cut Pro X. Th headphones work fine on Itunes. The headphones I'm using are Motorola S305.

Please give the exact specifications of the clips you're editing from the inspector. Please give the exact project properties of the project you're editing in.

Similar Messages

  • Problems with importing Hi8 video to Final Cut Pro

    I'm using FCP 5 and trying to import video in using the Canopus ADVC110 to my imac 10.4.1. My problems are:
    1. I'm unable to capture audio.
    2. The log and capture time code runs without prompting.
    3. The log and capture controls do not control my camera - perhaps because there is an intermediary box, the canopus, that is in its way?
    I realized this is not just a FCP question but anyone with any advice would be appreciated because I have a doc ready to be edited and I need to get it digitized. Thanks,

    i have to settings on my "vhs" capture box thing
    analog and digital....
    is my hi-8 camera analog?
    its a sony ccd-trv -21....i think thats the model number...
    i set it to non controllable device....the camera seems to be recognized but i cant
    get the picture or audio to capture..but it definately detects my cam.,....
    what settings besides non controllable device should there be in my fcp (latest editiion)
    im going digital out from cam to rca in my conversion box...and then firewire to firewire on my comp....
    thanks

  • Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    This is a major problem with Lollipop, but yo said it started 2 months ago.   Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again.   You might want to clear your cache before reloading.  Not sure this is your problem, but worth a try.  Good Luck

  • Anyone having problem with iphone getting not delivered message after sending picture and it really is getting delivered to recipient.

    Anyone having problem with iphone getting a not delivered message after sending pic and it really is getting delivered to recipient.

    Same problem here with and I've done everything shy of a total reset which I also find unacceptable. This problem exists on all iMessage platforms (iPhone, iPad, and Mac) so I don't see how restoring my iPhone would help the problem.

  • Anyone having problems with Elements organiser 13 when try to import photos from Mac photos which was an upgrade from Iphotos on 9th April 2015. Before when I was using Iphotos all was ok...

    Anyone having problems with Elements organiser 13 when try to import photos from Mac photos which was an upgrade from Iphotos on 9th April 2015. Before when I was using Iphotos all was ok...

    hi I have been trying to do this, but PE13 comes up with a fail message saying that file types are not supported, am only trying to import jpeg files so can't understand this.  So far have been unable to use PE13 at all, any ideas anyone please!

  • Anyone having problem with the iCloud lately

    anyone having problems with iCloud sending from iPad to windows computer within the last week?

    I am having similar problems.  iCloud has been working great between my Mac and iPad, but within the last week, when I save a Pages doc (via my Mac) onto iCloud, it doesn't show up for me to retrieve on my iPad.  All my settings seem to be correct, and there are still plenty of other docs on iCloud that I have previously saved, but these new ones will not show up.  I have plenty of space left, so that is not the issue...

  • HT1222 Is anyone having problems with iPhone Bluetooth to BMW s since iOS 6.1

    Is anyone having problems with iPhone Bluetooth to BMW s since iOS 6.1?

    Yes. I had an iPhone 3G and when upgraded to 6.1 the bluetooth connectivity failed progressively and eventually the phone just wouldn't connect. I broke and reestablished the pairing am few times and each time it would work for a while then disconnect to the extent I thought the bluetooth hardware in the car was failing. I then got an iPhone 5 and the same issue remained. In the last few days I've paired an old Blackberry with the car kit to rule out the BMW hardware. Blackberry is fine so it has to be iOS incompatibility.

  • Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

    Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

    I have had the same problem but I seem to be getting somewhere to fixing it!!! My battery was going down at 20% an an hour now its 10% with constant use and 5 in standby !!! So improvement all round
    First I did a restore then I drained the battery i started to charge it and when it came on I turned the phone off completely and let it charge to 100% I then left it for a couple of hours on charge at 100. I saw no improvement after 1st drain so I repeated the drain battery and charge steps again with the phone turned off when charging and have seen a very big improvement. I am going to do it again tonight and hopefully problem solved!!!!
    The next issue is iMessage as that's playing up and wifi drop out
    Good luck

  • Is anyone having problems with the facebook app - just shuts down before it even loads - frustrating!

    Is anyone having problems with the facebook app - just shuts down before it even loads - frustrating!

    Hi Robk573,
    Thanks for visiting Apple Support Communities.
    I'd suggest the steps in our iPad troubleshooting assistant:
    https://www.apple.com/support/ipad/assistant/application/
    Best,
    Jeremy

  • Is anyone having problems with the program MacKeeper not runing a full scan in Mavericks?

    Is anyone having problems with the program MacKeeper not runing a full scan in Mavericks?

    Do not install MacKeeper (and how to uninstall it if you have):
    https://discussions.apple.com/docs/DOC-6221
    by Klaus1
    (Please note that references to the original developers, Zeobit, also now refer to Kromtech Alliance Corp, who acquired MacKeeper and PCKeeper from ZeoBit LLC in early 2013.
    And Here  >  Beware MacKeeper
    In General 3rd Party AV Software is Not Required as Mac OS X tends to look after itself.
    Read Here  > https://discussions.apple.com/thread/4545776?tstart=0
    See Here  >  Antivirus Discussion

  • Is anyone having problems with the stock widget not updating?

    Is anyone having problems with the stock widget not updating?

    Widgets unfortunately have gone by the wayside since Apple introduced the App Store a couple years ago.  No widget has received any official recognition in the Apple listing of Widgets since that time.  So it is entirely possible the widget has gotten redirected.   There are many other Apps for stocks.  I personally like the Nasdaq Quote website since it knows mutual funds and other markets as well.

  • HT1766 anyone having problems with the start button

    Is anyone having problems with the Iphone 4 start button not working

    What is the start button?
    Do you mean the on/off button, or the Home button?
    If either one is not working at all, more than likely there is a hardware problem.

  • Is anyone having problems with the latest version of iTunes?

    is anyone having problems with the latest version of ITunes?

    Dwayne3333 wrote:
    is anyone having problems with the latest version of ITunes?
    What a vague and useless question.
    A search of the forums would have revealed issues that others are having.
    Why does it matter though?  Are you having issues?  If not.. why would you care?

  • I anyone having problems with the Sleep/Wake Button?? it doesn't do anything

    I anyone having problems with the Sleep/Wake Button??
    It doesn't do anything

    if you press it and it does nothing, it may be broken. did you drop it?
    try pressing and holding the top power button and round home button on the front for 6-8 seconds and you should see an apple appear.. if you do see the apple, the power button worked.

  • Anyone having problems with the Abc app no loading since it has been added?

    Anyone having problems with the Abc app no loading since it has been added?

    Hi Popalotofstyle,
    Thanks for using Apple Support Communities.  It may be worth trying a restart of your Apple TV to see if that allows the ABC app to load:
    Apple TV: How to restart your Apple TV
    http://support.apple.com/kb/ht3180
    Cheers,
    - Ari

Maybe you are looking for

  • CS3 to CS5 Upgrade - Compatibility Issues...?

    Our company is thinking of upgrading to Adobe CS5 and will therefore have to upgrade hardware as well (running Power PC based Macs throughout the art and prepress departments). From what I've heard CS5 only works on Intel based Macs? They are wanting

  • How do I create a physical structure in the data dictionary ?

    Hi all, How can I create a data structure using ABAP ? (prefrebly by using a class) I want to create a physical data dictionary structure, just like using se11 (data type -> structure). Thanx ahead. -Tonni

  • Which thread for events?

    I'm writing a few new Objects that send events to listeners. I've been doing the "send to listeners" bit in the eventDispach thread so far, which seemed like the right place, but I've noticed that a lot of the api doesn't do this. Is there a right or

  • Is there any way to find out what brush is applied to a path?

    I'm trying to write a script: select some paths, run the script, then each path that has a brush applied to it is changed to use a random brush whose name is sufficiently similar to its current brush. The application is pretty obvious - draw a bunch

  • Trouble converting to allow clip speed adjustments

    In clip inspector, where I should be able to drag along the line to slow down/speed up any particular clip, its asking me to convert the clip. I click on that, and it shows IMovie working to convert the clip, but then still asks me to do so and doesn