Is anyone having problems with numbers and keynote after installing ios7.1?

Neither numbers or keynote will open after I installed ios7.1 on my iPad. Pages and Database open just fine.

I have had the same problem but I seem to be getting somewhere to fixing it!!! My battery was going down at 20% an an hour now its 10% with constant use and 5 in standby !!! So improvement all round
First I did a restore then I drained the battery i started to charge it and when it came on I turned the phone off completely and let it charge to 100% I then left it for a couple of hours on charge at 100. I saw no improvement after 1st drain so I repeated the drain battery and charge steps again with the phone turned off when charging and have seen a very big improvement. I am going to do it again tonight and hopefully problem solved!!!!
The next issue is iMessage as that's playing up and wifi drop out
Good luck

Similar Messages

  • I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

    I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
    After +/- 10 to 15min my connection is gone.
    Does anyone have a sollution?

    Lots of people are having the same problem, you're not the only one, belieeeeve me.
    Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
    It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
    So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now.  I already posted  a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
    i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
    Site:
    http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

  • Problem with Rescue and Recovery after installing Norton Internet Security 2010

    Hi all.
    It's my first time in this forum.
    I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
    The message I get it:
    "Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
    I tried to close the Norton but I couldn't find how.
    Tanks
    Doron71

    Hi and welcome to the forum,
    the reason for this situation is, that the antivir files are protected from being modified.
    This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
    So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
    This will skip the backup of this file and will fix your situation.
    Please let me know, if you have covered this.
    Cheers

  • I am having awful problems with mouse and trackpad after installing Lion

    I have tried 3 different brands of mice and it happens with each one. the mouse clicks and sticks spontaniously and wont let go and hitting esc or trying to click somewhere else doesn't have any effect - it wont let go. And it doesn't seem to matter which program. At forst i thought it was just pwer point but it still happens if I command/tab over to mail or finder. and then I get the stupid wheel of death. power point (or whatever program I'm in) locks up. and then I lose recent edits.
    I have a Mac book pro. I have use and external keyboard and monitor when I'm at my office.
    When the problem has happened I have tried using the trackpad - but it's like it's dead. No click effect. No help!
    I AM REALLY TRYING TO NOT GET ANGRY - BUT I AM READY TO SCRAP LION!!!!!!!!!!!
    HELP!!!!!!!!

    Thanks for the tip re MagicPrefs! Great app!
    Is anyone having trouble with Mac losing the connection to Magic Mouse after the Mac goes to sleep? I am running Mac Mini late 2009 with dual-core 2.0 GHz and 4 GB RAM. Never had any issues under Snow Leopard, only after the upgrade to Lion. Battery is OK (tried fresh ones with no luck).
    Turning the mouse off then on does not help, but ocasionally I have been able to get the mouse back by simply using Command+Tab. It does not seem to matter which app is active.

  • Anyone having problems updating Numbers and Pages on ipad2?

    Since attempting a routine update via the appstore, 5 updates have failed including Numbers and Pages. When I try to repeat the update, it says it is in the middle of installing, but nothing is happening. At the moment I can't access vital spreadsheets and have no way of making the update work.
    Any help would be appreciated!
    I was on ios5 when the problem started but am now on ios6, still the same problem.    

    This is the iPad forum, are you in the right place?
    Computer os has nothing to do with iPad apps.

  • Anyone having problems with their iPad 2 after updating to OS8

    OS 8 doesn't seem to be fully compatible with iPad 2. Startup is really slow and some apps are not working correctly.

    Im having the same issues and reset does not work   CNET noticed it also.   I am seeing lots of complaints...When will Apple fix the prob?

  • Problem with Itunes and NAS after installing latest version of Itunes

    After installing the latest version of Itunes on my new PC (Windows 7 Ultimate) I have problems seeing the music off the Itunes server on my NAS.
    I see the name of the NAS under tab SHARED (GEDEELD in dutch), but when I click on it,  Itunes is making connection with the NAS but I see the music for less then a second.
    Then the display goes back to the tab LIBRARY.
    I've searched the web for this problem, checked on my firewall,... nothing to find.  On another windows 7 PC, it is still working fine but this is an older version of Itunes.
    So what can be the problem ?

    No, I had not uninstalled it, I didn't realize I had ever installed it.  I don't use it at all, never have.  I uninstalled the MobileMe Control Panel then restarted my computer for good measure, and that appears to have resolved the issue!  Thanks very much for your help!

  • Is anyone having problems with siri and mail servers?

    I'm in Colorado and am using a 4s on verizon.  Both yesterday and today I've had problems downloading mail from the servers. Both accounts are used as apple ID's and are tied to my icloud account.
    Siri has also been failing me yesterday and today. 
    Is anyone else experiencing problems?

    See other thread:
    https://discussions.apple.com/thread/3943083?start=0&tstart=0

  • Anyone having problems with LR and Kaspersky 2013?

    I'm running Win x64 with LR 4.1 and have been using Kaspersky Internet Security for the past two and a half years with no issues. The new version of Kaspersky recently came out (KIS2013) and I decided to upgrade, following all the guidelines on their forum for uninstalling the previous version first. Since I installed it on Saturday, I've had three blue screens on what was a previoulsy stable and reliable system, and the only thing that's changed on that system in this time is KIS. Each time the blue screen has returned a different bug code and has occured at random; the only consistent thing has been that LR has been running. I've checked out the usual suspects (memory check, update graphics driver), but the PC crashed again regardless. Of course, this isn't an LR issue specifically, but I'm just wondering if any other LR users have tried out KIS2013, and if they have, have they had similar problems?
    I've just today uninstalled KIS and am currently running Microsoft Security Essentials instead. So far - and it's early days - it seems to be fine with LR running in conjunction. It appears to me (as a relatively PC savvy user, but certainly no software engineer and with minimal experience of troubleshooting system crashes) that KIS has a conflict with LR that causes significant stability issues. I'll be posting on the Kaspersky forum as well.
    Based on my experiences, if you are running KIS then stick with the 2012 version. That caused me zero problems.
    M

    iPhoto forum where the experts are.

  • Problems with iPhoto and Aperture after installing Mavericks

    I use iphoto 11, version 9.5 (902.7) and Aperture 3.5.  both are dodgy since installing Mavericks - freezing, not allowing access while wheel spins, showing "Processing". I've re-installed both aperture and iphoto from the Apps store.  No difference. Advice please.

    The problem keeps occuring every time  I shut down my laptop and reopen it when I am not at home (i.e. no Time capsule connected...)
    What could I do to solve this issue...anyone please?

  • Having problems with Labview 7.0 after installing Windows XP Pro

    After updating Windows XP Pro from Windows 98, my programs give me the following error:
    The procedure entry point SUnMapLS_IP_EBP_12 could not be located in the dynamic link library KERNEL32.dll
    I tried reinstalling Labview 7.0, but to no avail.

    Hello Becky,
    I performed all the windows xp updates when I installed xp.
    Our computer has labview 6.0 and 6.1 on it. I thought maybe they were causing a problem, so I tried uninstalling them. I downloaded msiblast and tried to remove Labview 6.0 and 6.1, but since they used to be on a network, and the university does not carry those programs anymore, they gave me errors. I was able to uninstall 7.0 and reinstall it, but it still gave me the same error as described in the original post.
    I went into the registry and removed 6.0 and 6.1, but it still gives me the same error.
    I need a way of removing 6.0 and 6.1 so that I can do a clean install of 7.0.
    Thanks for your help,
    Sergio
    Attachments:
    Serg_usf_Screen_Shot.doc ‏550 KB

  • Having problems with your epson print after installing Lion?

    Go hear for download.
    http://support.apple.com/downloads/#epson%202.8
    My Macpro wouldnt do a auto software update for some reason.

    Hello Becky,
    I performed all the windows xp updates when I installed xp.
    Our computer has labview 6.0 and 6.1 on it. I thought maybe they were causing a problem, so I tried uninstalling them. I downloaded msiblast and tried to remove Labview 6.0 and 6.1, but since they used to be on a network, and the university does not carry those programs anymore, they gave me errors. I was able to uninstall 7.0 and reinstall it, but it still gave me the same error as described in the original post.
    I went into the registry and removed 6.0 and 6.1, but it still gives me the same error.
    I need a way of removing 6.0 and 6.1 so that I can do a clean install of 7.0.
    Thanks for your help,
    Sergio
    Attachments:
    Serg_usf_Screen_Shot.doc ‏550 KB

  • Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    This is a major problem with Lollipop, but yo said it started 2 months ago.   Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again.   You might want to clear your cache before reloading.  Not sure this is your problem, but worth a try.  Good Luck

  • Anyone having problem with iphone getting not delivered message after sending picture and it really is getting delivered to recipient.

    Anyone having problem with iphone getting a not delivered message after sending pic and it really is getting delivered to recipient.

    Same problem here with and I've done everything shy of a total reset which I also find unacceptable. This problem exists on all iMessage platforms (iPhone, iPad, and Mac) so I don't see how restoring my iPhone would help the problem.

  • I am having problems with clone and heal.  No matter what I do nothing changes in the image.  Has anyone had this problem?

    I am having problems with clone and heal.  No matter what I do nothing changes in the image.  Has anyone had this problem?

    Do you have your Opacity Control set to a very low value?

Maybe you are looking for