Is anyone having problems with the w3c validator killing Dreamweaver

CS5.5 on win7 64bit is my system.
If I try to validate a PHP page in live view, most times the validator works fine.
If there is an error, and I click on the line number to find the error location, edit the file and close the validator window, I get a short fat barber's pole in blue and white on the bottom right of my screen, or sometimes a long thin one at the top right.
The following message appears:
>>>>>>>>>
Server not found
The page
"http://localhost (path to page) was not loaded because Dreamweaver could not find the server "localhost". Please make sure that you are connected to the internet and the server name is correct.
>>>>>>>>>
On other occasions, the following  message appears after using the validator:
>>>>>>>>>
path to filename      The request to the W3C service has timed out. The service or your Internet connection appears to be down.
My Internet connection is fine, and if I click on the w3c button again it validates with no problem.
>>>>>>>>>
When the first message appears, Dreamweaver becomes unstable and hangs, the only solution is to restart the program, after which everything works fine - including the validator, until it finds another error and the whole thing starts over again.
CS5.5 on win7 64bit is my system.
Is anyone else having problems like this with the validator?

Try this: http://forums.adobe.com/message/2796075

Similar Messages

  • Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    This is a major problem with Lollipop, but yo said it started 2 months ago.   Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again.   You might want to clear your cache before reloading.  Not sure this is your problem, but worth a try.  Good Luck

  • Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

    Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

    I have had the same problem but I seem to be getting somewhere to fixing it!!! My battery was going down at 20% an an hour now its 10% with constant use and 5 in standby !!! So improvement all round
    First I did a restore then I drained the battery i started to charge it and when it came on I turned the phone off completely and let it charge to 100% I then left it for a couple of hours on charge at 100. I saw no improvement after 1st drain so I repeated the drain battery and charge steps again with the phone turned off when charging and have seen a very big improvement. I am going to do it again tonight and hopefully problem solved!!!!
    The next issue is iMessage as that's playing up and wifi drop out
    Good luck

  • Is anyone having problems with the facebook app - just shuts down before it even loads - frustrating!

    Is anyone having problems with the facebook app - just shuts down before it even loads - frustrating!

    Hi Robk573,
    Thanks for visiting Apple Support Communities.
    I'd suggest the steps in our iPad troubleshooting assistant:
    https://www.apple.com/support/ipad/assistant/application/
    Best,
    Jeremy

  • Is anyone having problems with the program MacKeeper not runing a full scan in Mavericks?

    Is anyone having problems with the program MacKeeper not runing a full scan in Mavericks?

    Do not install MacKeeper (and how to uninstall it if you have):
    https://discussions.apple.com/docs/DOC-6221
    by Klaus1
    (Please note that references to the original developers, Zeobit, also now refer to Kromtech Alliance Corp, who acquired MacKeeper and PCKeeper from ZeoBit LLC in early 2013.
    And Here  >  Beware MacKeeper
    In General 3rd Party AV Software is Not Required as Mac OS X tends to look after itself.
    Read Here  > https://discussions.apple.com/thread/4545776?tstart=0
    See Here  >  Antivirus Discussion

  • Is anyone having problems with the stock widget not updating?

    Is anyone having problems with the stock widget not updating?

    Widgets unfortunately have gone by the wayside since Apple introduced the App Store a couple years ago.  No widget has received any official recognition in the Apple listing of Widgets since that time.  So it is entirely possible the widget has gotten redirected.   There are many other Apps for stocks.  I personally like the Nasdaq Quote website since it knows mutual funds and other markets as well.

  • HT1766 anyone having problems with the start button

    Is anyone having problems with the Iphone 4 start button not working

    What is the start button?
    Do you mean the on/off button, or the Home button?
    If either one is not working at all, more than likely there is a hardware problem.

  • Is anyone having problems with the latest version of iTunes?

    is anyone having problems with the latest version of ITunes?

    Dwayne3333 wrote:
    is anyone having problems with the latest version of ITunes?
    What a vague and useless question.
    A search of the forums would have revealed issues that others are having.
    Why does it matter though?  Are you having issues?  If not.. why would you care?

  • I anyone having problems with the Sleep/Wake Button?? it doesn't do anything

    I anyone having problems with the Sleep/Wake Button??
    It doesn't do anything

    if you press it and it does nothing, it may be broken. did you drop it?
    try pressing and holding the top power button and round home button on the front for 6-8 seconds and you should see an apple appear.. if you do see the apple, the power button worked.

  • Anyone having problems with the Abc app no loading since it has been added?

    Anyone having problems with the Abc app no loading since it has been added?

    Hi Popalotofstyle,
    Thanks for using Apple Support Communities.  It may be worth trying a restart of your Apple TV to see if that allows the ABC app to load:
    Apple TV: How to restart your Apple TV
    http://support.apple.com/kb/ht3180
    Cheers,
    - Ari

  • Anyone having problems with the on/off switch

    anyone having problems with the on/off switch. It sometimes does not work, I occasionally have to pull the plug out and replug then hit the button and it goes on?

    Out of the 100+ millions of iPhone, I'm sure there are many people that have that same problem.  If you do, you have a 1 year warranty... take it in before it runs out.

  • Anyone having problem with the iCloud lately

    anyone having problems with iCloud sending from iPad to windows computer within the last week?

    I am having similar problems.  iCloud has been working great between my Mac and iPad, but within the last week, when I save a Pages doc (via my Mac) onto iCloud, it doesn't show up for me to retrieve on my iPad.  All my settings seem to be correct, and there are still plenty of other docs on iCloud that I have previously saved, but these new ones will not show up.  I have plenty of space left, so that is not the issue...

  • Is anyone having problems with the new Xerox printer driver update from Apple? My 8700S is no longer working with QuarkXPress.

    I allowed a System Update that included a Xerox Printer update. I am running a MacPro 10.6.8 with Quark 8.5.1 and a Xerox ColorQube 8700S.  EVERY was working perfectly before the "update" but afterwards anything sent to the printer from Quark would stall the printer.  I went to the Xerox website and downloaded their Printer Driver and tried again.  Now I could print from  Quark but I can NOT get to the printer window to change the type of paper, etc.  So, the problem still persists.
    Should I try going into Time Machine and trying to find the Xerox Print Driver in the Library folder?
    Should I upgrade the whole system software?  (I wouldn't mind doing that AFTER I get this magazine off to the commerical printer)
    Should I upgrade to Quark 9?
    Any help here would be apprciated.
    Thanks  - Rob

    As a general rule of thumb, I never install updates until I read its info and I am having problems with my current software.  I hide the updates until I need them.  Usually this happens when I update or upgrade my os.  I don't fix what ain't broken is my golden rule.
    It is possible that you need to update or upgrade Quark in order for your newer printer driver to work.  First I would try the following....
    Disconnect all peripherals from your computer.
    Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
    If your printer does not work afterwards, update or upgrade Quark.  If that does not work, contact the printer manufacturer.

  • Is Anyone Having Problems with the newer version of Firefox?

    I still have my older Mac OsXv10.4 Tiger software. I wasn't exactly happy with Safari browser as it would block many sites and were considered incompatible so I downloaded the free Firefox browser (the 2.0 version) of which I STILL have. I'm aware that there is a much newer version and would like to download that, but I've heard a lot of people saying they have been having severe problems with it, but then they have PCs and not Macs.
    So my question is for you Mac users that use Firefox, have you had major problems with the newer version? I'm real hesitant to download if I'm going to have the same problem PC users are having...like constantly crashing. Also would my old Tiger software be compatible? I don't want to upgrade to Leopard.

    Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.

  • Is anyone having problems with the Health App and Withings?

    After upgrading to ios 8.1 I am still having a problem getting my Withings Health Mate data to correctly update my Healt Dashboard. The information that does show up on the different Dashboard widgets is way off. For example, I today walked 2400 steps according to Withings, but the Health Dashboard shows 10,700 steps (720,000 in smaller print on another line). It further shows my daily average at 313,000 steps! Ridiculous.
    Walking/Running distance for the days shows 22.5 miles with a daily average of 108 miles.....I'm not Barry Allen/The Flash.

    My problems with the Healt App are all over the map. The information on Withings Health Mate is totally accurate, and updates immediately.  I have their scale (since 2011) and wireless blood pressure monitor. Also, I find the heart rate senson on the iPhone 6 to work well, every time.
    This issue for me is with Apple's Health app. I get ridiculous readings on the Dashboards. For example, it shows my daily average in steps as 170,688, and miles walked at 80. Hardly! Additionally, the Dashbord widgets will disappear/reappear for no reason. I have tried switching the priority of data sources for the steps dashboard between Withings and my iPhone 6 (because it is indicated that the top source governs the dashboard info), to no avail.
    Lastly, I don't know how to interpret the infomration on the individual dashboards. On the same line as the word "Steps" there is a number, i.e. 14,272 steps, and just under it the word "Today." However, when I switch from "Day," "Week,," "Month," and "Year," those number don't change. Below the word Today is a number (which changes all the time), and at the bottom of the widget, just above the month (October now) is the number 1,149,749. Nice.
    I would like to get the Apple Watch next year, but if the Health App cannot be fixed I may not.

Maybe you are looking for

  • PDF created with InDesign CS6 on Mavericks not legible in other systems

    Recently migrated to a new MAC with Mavericks, now after creating PDF files and sending them to clients, some are able to view the file correctly and others are not? Any help will be appreciated.

  • Apple TV 5ghz not working after upgrade to 5201

    I've been using a 5ghz connection for a few months now with no problem. I've just upgraded to software version 5.1 (5201) and 5ghz no longer works - I just get a message saying no connectivity. 2.4ghz still works but is not ideal due to other competi

  • Plug in Firewire...nothing...

    My last mac book was 9mos old and went in for service 3 times. Finally got my new macbook last month. With imovie 08 on it. Now when I hook up my sony hc38 it does nothing. Acts as if nothing is connected. My last one I just plugged it in and it star

  • Error on ASSET assignment

    Hello, we are on SRM 5 and have a problem on asset assignment. when I create a SC, I have a cost center for default. When I change for ASSET my GL/account wich is automatically determined disappeared and When i try to fill the asset and I check ma SC

  • Adobe Premiere Pro Help | Editing audio in a Timeline panel

    This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/editing-audio-timeline-panel.html