Is anyone having spam generated from their contacts list after installing ios6 on iphone4s?

Is anyone having spam generated from their contact list after installing ios6 on iphone4s?

You are imagining it.

Similar Messages

  • IPHONE sending Yahoo spam mail from my contact list

    I received a few emails on my alternate accounts with spam sent from my iphone. The spam is in my sent mail folder so Iphone is definitely source.
    Home laptop is security protected and doesn't show spam in sent mail folders.
    Anyone else have this problem??
    Since disabled my outgoing yahoo on iphone and changes yahoo password.

    Your iPhone is most definitely not the source. It is more likely your password was compromised and webmail was used. This also explains why you see mail in your sent folder on the iPhone.
    Change your password again and make sure it is a strong password. Also make sure you do not use the same password that you use for other sites on the web.
    HTH,
    Alex

  • Macbook Pro Retina EFI update 1.2 doesn't clear from software update list after installing

    I've had this problem for a few weeks.
    I install the update via the App Store, the system restarts, but afterwards I get a notice from the App Store that the same update needs to be installed. If I look further down the list of installed items it does record the update as being installed, but I'm not sure if it was really installed.
    Note: I have tried to install the update manually w/o the App Store, but I still get a notice from the App Store after restart that the update needs installing.
    This isn't  huge deal, but it's kind of annoying that I'm not sure if the update was installed or not, and frankly, my OCD kicks in whenever I see that this update is still not clearing from the list of items to be installed.
    By the way, the update has to do with the nvidia card not losing performance after the computer wakes up.
    Thank you

    Hi there
    However, I spoke to Apple and was  given the following advice:
    ==
    Thank you for contacting Apple.
    Based on the details you provided, we think you might find the following information helpful:
    OS X Mavericks: Reset your computer's PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Sincerely,
    Apple Support
    ==
    Try resetting the PRAM and please report if the freezing trackpad happens again. Please post in the following thread:
    https://discussions.apple.com/message/23775003?ac_cid=tw123456#23775003

  • TS1474 Contacts lost after installing iOS6 on all devices

    I've lost two thirds of my some 700 contacts on iPhone, iPad, MacBook and iMac after installing iOS 6.  Is there a recommended method for restoring?

    You are imagining it.

  • Ipod disappears from itunes source list after installing update 1.0.2

    i plugged in nano to install more music. itunes asked if i wanted to install update 1.0.2 on my ipod, i clicked ok, and it installed. But the ipod never restarted or reappeared in source list or windows device manager (except briefly in devices when connected screen on ipod appears - but clicking stop just produced an error message that there was nothing to stop). it just cycled on ipod screen through apple logo, main screen and connected. ipod works fine otherwise. tried resetting ipod, restarting pc, different usb (although the original works fine when recharging son's mp3), reinstalling itunes - all no go. can't restore ipod as not registering on itunes or pc. any ideas before i grapple with apple phone support?

    All,
    I've seen this one more times than I care to. At first, I thought I had a bogus unit. After replacing the first one, hooked up with a knowledgeable in-store associate who helped me part of the way.
    Leodis' assessment of the update is correct. Apple needs to resolve the download portion of this update. It appears that the music, videos, and other content are downloaded, but the unit is left in an invalid state, causing it to cycle endlessly with the startup screen (Apple logo).
    In the short term, the best advice is to NOT download the update.
    If you are stuck with a unit still in this undesirable state, relax. There is hope.
    First you need to disconnect your unit, and reset it. First slide the lock button back and forth (from lock to unlocked). Next press Menu and select (middle button) at same time, waiting for Apple logo to reappear (or disappear). Next press the Pause/Play button along with select button. This will take your unit to "disk mode". At this time, the screen should show a check mark and a message indicating it is ok to disconnect.
    Before you reconnect the unit, it might be best to remove the iTunes software from your machine (using Add/Remove programs). I had to do this in order to get the software back to an "original" state. Basically, getting back to a point where you will be asked/prompted for updating the iPod software (of course, you will refuse this). Don't worry about your music, videos, etc. All of that library information should still be there in the original location (not the iTunes library location). You could also export the library, then re-import it later.
    Now you can re-connect your unit up with your machine. Wait until it is recognized by your system.
    Next go into "My computer" folder, you should see the unit there. You will want to right click the icon, and chose "format". This will re-format the internal flash hard-drive. Don't worry. It will not do anything to the ROM containing the bootstrapping software. Basically, you can't hose up this product, short of taking a hammer to it (which maybe by this point you might have contemplated that! )
    After the re-format, you want to install iTunes again. Go thru the same motions as before. Bu this time, it will pop up a panel indicating that the unit is in themiddle of a restoration. That's ok. Click ok. Then, once the unit is recognized by iTunes (appears in left panel), select the unit, and go to Summary tab. On that page, you want to click on "Restore" button to restore back to factory settings.
    During this restore, at some point, you will be prompted for that iPod update. Refuse it!! Don't do it. That's where we all got hosed.
    After the restore is complete, your unit will be functional again.
    At this point, go on your merry way and reload your media content back into the local library and then sync to your unit. This is also a good point to import your saved library info, if you exported it.
    Enjoy the nano!!!
    Sorry this is a long post. Unfortunately, it took a few days to figure this out. But at least it is possible to avoid the issue. I've verified these steps on both WinXP (home edition) and WinXP Pro.

  • I currently having problems when dialling with my 4S either from the contacts list, or when using the phone through bluetooth to my in-car system. The phone becomes confused regarding what method / route of connection handsfree, normal use or speaker.

    Hi each time i use my 4S phone a dial from the contact list, the phone will not select a communication mode, either normal speaker or handsfree (car), I have to force the phone into speaker mode and the back to normal mode before I can speak to or listen to anyone. The annoying aspect is the recipient of my call can answer but cannot hear me nor I them.
    What am I doing wrong, or is there an issue with the phone. The same situation occurs when the phone is used with bluetooth in my car, the previous iphone worked perfectly can you please advise.

    Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app.  I am certain other applications also need this information.  Although lengthy, I could not find a more comprehensive place to retrieve this information.  Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • When typing the name of the contact I want to send a text message to, names from my contact list no longer pop up as suggestions. Can anyone help me with this?

    When typing the name of the contact I want to send a text message to, names from my contact list no longer pop up as suggestions. Can anyone help me with this?

        There's always a way to reset the device jmn33! Thanks for keeping us in the loop. To process a full reset/restore on the device please visit http://vz.to/12TLCsR. Please keep us posted once this is completed, thanks!
    MatthewS_VZW
    Follow us on Twitter @VZWSUPPORT

  • Anyone having same problem? I phone 4 after updating to Vers.5.1.1. battery cannot be 100% full charge, always stop at 99% and battery drains off fast too :(

    Anyone having same problem? I phone 4 after updating to Vers.5.1.1. battery cannot be 100% full charge, always stop at 99% and battery drains off fast too

    I had major issues with the iPhone 4s battery, however it’s resolved.
    The tech who set the phone up at the Apple store did so with little training.
    if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
    Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
    turning of locator and the push notifications from facebook--they have a lot!

  • TS3899 I have a new IPad and am trying to send a new email from my contact list with photos attached.  No success.  I can reply to an email ok.  But cannot attach a photo from my pictures.

    I cannot send an email from my contact list and attach a photo from my pictures.  I can reply to emails I have in my inbox BUT i cannot find where I would attach a picture there.

    Since you are a new iPad user .....
    Complete guide to using iOS 6
    http://howto.cnet.com/ios-6-complete-guide/
    Guide to Built-In Apps on iOS
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
    You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    http://www.youtube.com/watch?v=YT2bD0-OqBM
    http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
    http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • Ive deleted contacts from my contacts list but they still pop up when i go to text and type in the name of a current contact. .  How can i delete them off my phones memory for good?

    Ive deleted contacts from my contacts list but they still pop up when i go to text and type in the name of a current contact. .  How can i delete them off my phones memory for good? iPhone 4S

    At the present time, the only way to clear that is to restore the phone as new.  Perhaps a future iOS update will give us the option to clear that cache.

  • How to select multiple addresses from the contacts list to send an email?

    How do I select multiple addresses from the contacts list at one time to send an email. Each time I select one, the address book closes and I have to touch the "+" key to open it back to select another address. Is there a way to select all of them at one time instead of making a group? Thanks.

    Yes, once you select a person from your Contacts app, you either need to select more from the '+' button or you can tap in the 'to:' field and type in the first few letters of a contact and select from the list. Kinda bummer but gotta make do.

  • After upgrading from Mavericks to Yosemite I can no longer find in Mail the icon (looks like the Add To Contacts icon without the   mark) I used to press in order to obtain an e-mail address from my contact list. What procedure should I use now in or

    After yesterday upgrading from Mavericks to Yosemite I can no longer find in Mail the icon (looks like the Add To Contacts icon without the + mark) I used to press in order to obtain an e-mail address from my contact list. What procedure should I use now in order to quickly add an address to an e-mail that I wish to send?
    Bob

    On the right of the To: field you will see a circled plus sign:
    Click it.

  • How can I get caller id to announce the caller from my contact list?

    My old Motorolla and LG phones had a setting to speak the caller id before ringing.  It took the names from the contact list or if not there would just call out the phone number and then go to the ringtone.  Does the Iphone 4 not have this setting?  I can't believe this "smart phone" which does just about everything would not have this function.  What am I missing here?

    I do have an iPhone 4S.  It does not provide a talking caller ID.  I too I'm surprised that such a feature is not on the iPhone.  There seems to be an "app" for just about everything, but I've yet to find one that does this very simple function.  There are some apps out there that do provide a form of caller ID, but they seem to require too much setting up for something so simple.  I do have a work a round, but it is a poor subsitute for what we are both looking for.  I have set different ringtones for some people in my contact list, so when I hear the tone, I do know who is calling.  However, if you have a great deal of contacts, this method really would not work.

  • HT5463 how i can block particular number from my contacts list

    how i can block particular number from my contacts list please guide me because even true caller software is also not supporting iphone

    As Ocean20 said, there is no official function that does this built in. What you could do however is to find an app that mute calls that come from "blocked" numbers.

  • When i tried to text a message from my contact list  i received a message saying invalid number of digits. i use the area code with the number but still would not send

    When i tried to text a message from my contact list  i received a message saying invalid number of digits. i used the area code with the number but still would not send

    Call your carrier and see what they suggest.

Maybe you are looking for

  • Mapping - Split string separated by value ;

    Hi, I have a mapping where 4 source values makes the key for 1 target value. In the target string (result after value mapping) i want to get the last value in the string "TargetValue1. <i>SourceValue1;SourceValue2;SourceValue3;SourceValue4;TargetValu

  • Screen protector... need to buy one today, input?

    Howdy. I bought a case mate case for the phone and love it. It came with a screen protector which works great until my nephew somehow managed to peel it back. now I have bubbles and fingerprints so I want to get a new one. Im traveling tomorrow for a

  • Oracle Graphics Developr's guide/manual

    Hi, I'm looking for a documentation for Oracle Graphics. It's a dessuporrted tool now but we are currently on a platform that is still compatible with the Graphics Builder, and we have a current requirement to include a chart on an existing report (c

  • Are LV menu's emulations? And if so how can they be blocked in the WINAPI

    I need to popup a Global vi and do not want the user to be able to access the full LV menus that appear on a non-running vi such as a Global vi. It appears that LV menus are emulations and not actual windows hmenu structures. Does anyone know of a sn

  • Create Query in FDM to filter records from ERPi/EBS

    Hi, I am replacing a manual data load created by a sql query which has many filters and text file lookups. The process creates a file which is loaded by FDM scheduler. The requirement is to automate the load, which I have done in ERPi/FDM, but I can