Is anyone running CC with Encore CS6 in Windows 8?

I won't re-hash the angst or that the FAQ states that Encore won't be supported past Windows 7 SP1.  So theoretically, even a Windows 7 patch to SP1 might break it....
But I am wondering if anyone is running CC with Encore CS6 successfully on Windows 8?   I keep seeing all the posts taking everyone to the FAQ on how to install Encore with creative cloud and how all is well.....but how comfortable is a user going to be when moving to Windows 8 with no guarantee it will still work?
BJBBJB1

I'm running on Windows 8.1 and so far so good. But some professional clients (including myself for personal projects), and especially consumer clients are not quite ready to move away from disks 100%. EOL for Encore at this point is too rash a decision. Must we switch to less sophisticated disk authoring apps that are still being updated?

Similar Messages

  • Media pending with Encore CS6

    Hello,
    I have a very large project built with Premiere Pro CC.
    The project has 5 "sequences" which are "rendered" before export to Media Encoder CC.
    The "transcode" (max quality) runs very well but is very slow (Media Encoder does not use GPU even the "Playback Mercury Engine" is activated), this is worst without Playback Mercury Engine.
    The transcoded files are imported within Encore CS6 (no dynamic link between Encore CS6 ane PP CC and no Encore CC version, Adobe decided this but with very bad reasons).
    The Encore project has 5 "montages" and one "diffusion list", the menu has "animated" buttons and need to be rendered before creating the final disk (blu-ray).
    But when I try the menus before creating the blu-ray disk I obtain :
    - media pending message : the audio track is there but the video track appears lated and is not smooth,
    - the animated button of menus are very curious : some are correct but others flash in red or green.
    - the software Encore freeze with a white screen, then the job may be resume,
    - the "complete title" begins normally then the video disappears but not the audio, after 10 seconds the video appears but seems to be frozen.
    I checked the links of chapters and buttons, all works normally. The project checking give no error.
    I never encountered this with Premiere Pro CS6 and Encore CS6 (dynamic link works).
    How can I fix this strange situation without discarding PP CC and migrate to FCPX ?

    Hello,
    Many thanks for your very long reply and your interest in my problems.
    I shall try to answer you :
    - 1) OS :  Windows 7 64 bits Pro SP1, french,
                     Version : 6.1.7601.18247 (Win7RTM)
                     Framework.NET : 4.0.30319.18408 built by : FX451RTMGREL)
                     DirectX : 11.0,
                     OpenGL : 6.1.7600.16385 (Win7_rtm.090713-1255).
    - 2) Yes the media pending goes away but after a couple of minutes (one
    year ago I was using PP CS6 and Encore CS6, I never had this problem
    even with very long files),
    - 3) Yes my GPU driver is updated (Nvidia GeForce 332.21 dated 12/19/2014).
    I never had thiese problems with PP CS6 + Encore CS6 and my projects
    built with these PP ans Encore version were with the same structure and
    length (in PP CS6 : sequences up to 45 minutes, in Encore CS6 chapters
    up to the same time).
    The difference between are in my hardware :
    - the RAM was upgraded from 12 GB to 24 GB,
    - the CPU was overclocked from 3,2 GHz (default) to 3,88 GHz).
    - 4) I shall try up to the disk burn to check if the problem is just due
    to display of "animated buttons".
    I hope my answer will be usefull for you.
    Regards,
    Jacques Gourier.
    Le 11/02/2014 19:53, Stan Jones a écrit :
    >
          Re: Media pending with Encore CS6
    created by Stan Jones <http://forums.adobe.com/people/Stan+Jones> in
    /Encore/ - View the full discussion
    <http://forums.adobe.com/message/6110278#6110278

  • Problem with Encore CS6.

    Good morning everyone.
    I'm mading a DVD with Encore CS6 and I've created a Custom Menu.
    When I connect the Chapters to the corrispondent Button there's a strange problem.
    I've done 27 Chapters, and obviously 27 Buttons, divided into 3 lines x 9 Buttons.
    The first eighteen ones works perfectly, but the last nine don't.
    When I run the preview, the last line of Buttons is like there wasn't present on the Menu, although the Buttons are there and they're visibible.

    It's the DVD spec: a 16:9 menu only allows 18 buttons. (It is 36 for 4:3.)

  • Major glitches with Encore CS6 on Mac

    Hi, I am having a major problem with Encore CS6 on mac. Whenever I have tried to build a DVD (using a DVD+R disk in the superdrive of my MBP) it makes my screen glitch, and my computer freeze up.
    I would appreciate it if you could help me with this ASAP because I need to have this project done no later than the 20th of December.

    I'm running OSX 10.8 Mountain Lion on my mid 2012 Macbook Pro with 16Gb of Ram, and a 2.6GHz dual core i7 processor.
    What do you mean by build to a folder or image? (I'm still relatively new to Encore.)
    Here's what keeps happening

  • Pr CC sequences not compatible with Encore CS6

    Dear Adobe,
    Could you please consider doing one of the following:
    1. Make a CC version of Encore
    or
    2. Release an update that will make Pr CC sequences compatible with Encore CS6
    ... I really miss being able to drag Premiere Pro sequences directly into Encore.
    Thanks!
    -Stefan
    P.S.
    I really like your products!

    Both 1 and 2 are NOT going to happen... CS6 is the final Encore http://www.adobe.com/products/encore/faq.html
    There is a link at the bottom of http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html to a video tutorial on using EncoreCS6 with PProCC

  • Help Me with Encore CS6 Menu and buttons

    Hi I need help with Encore CS6 Menu's.  I have a Premiere CSs 6 video which is 3 hours long and 21 chapters.  It looks like I can get 18 of the buttons to work.  I also want to set up a exit button.  Is there a 18 button limit to a menu?  Should I be looking at using menu index's or play lists?
    Thanks in advance for your help.
    Ed

    I assume you have a single video on one timeline, and you have chapter markers for your chapters.
    A button (e.g. "play movie") links to the timeline (default is chapter one, which is what you want). The end action of the timeline is "last menu."
    Commonly, a second button on the main menu goes to a chapters menu. Each chapter menu has links back to the main menu and to the next and previous chapter menus.
    For EACH chapter, you create a chapter playlist with that one chapter in it. The end action of the chapter play list is "return to last menu."
    There are no end actions on chapters and no overrides anywhere in the project using this method.

  • Hello, i want to download premiere pro cs6 with encore cs6, i have my membership but i cant download it, what can i do?

    hello, i want to download premiere pro cs6 with encore cs6, i have my membership but i cant download it, what can i do?

    you have a cc subscription?
    if so, does your computer meet specs (eg, 64bit) ?

  • Publishing air apps with native extension with Flash CS6 on Windows

    Hi all,
    is there any trick to publish air apps with Flash CS6 on Windows?
    I tried all native extensions from devnet, but nothing work to me.
    I read on Mac is possibility to specify the iOS SDK folder in publish
    settings, but on Windows it´s missing. 
    Is there anybody who has some experiences with publishing apps
    with native extensions for iOS and Android with windows Flash CS6?
    Thanks for all advices.

    I sympathize. I recently found a native alert for iOS and Android that's working with Flash CS6 on Windows with AIR 3.2.0.2070 but not AIR 3.2.0.2060. You can get the ANE here:
    http://www.jampot.ie/ane/
    Haven't tried the other ones. Let us know if you decide to try them.
    The sample code they have on the page doesn't work with the native alert. Here's the code I created - it's a document class for a .fla that has one dynamic TextField and one Button component on the stage :
    http://pastebin.com/DsxR9nJ4

  • Update Encore CS6 in windows 7

    New in that forum and I'm a new user of Encore.
    I have a permanent licence for Encore CS6 for Windows 7.  If I want to update Encore, I see that there are 2 new updates in that site, but there are TRIAL update.
    Is it good to install in my permanent license for Encore ??  The update still work in 1 year ??
    Thanks !
    Denis

    Go to http://www.adobe.com/downloads/updates/ and select Encore for Windows
    Then click either of the two updates that show for CS6
    Each update has trial as part of the file name... most odd

  • Problem with encore cs6 in cc

    I encountered technical problem using Adobe creative cloud.
    Because I want to burn a DVD I installed Encore Cs6. This program didn’t include the menu library, so I imported that following the instructions I found on the internet.
    The program works alright, even with a dynamic link with photoshop. A preview of the resulting menu works fine too.
    However, I can’t save it or build it. I get the message: an input contract error occurred. Before that I see a message stating the following: /Volumes/Builds/Mango/Main/Adobe/MediaMac/../../Src/FileCache/FileCache.cpp-1016
    Without the link, or without any content all I get the same messages. So I guess it’s not caused by the dynamic link or by the assets which I imported.
    By the way, I’m working on an Apple computer.
    Hope someone knows how to tackle this problem!
    Elsbeth Mulder

    Mavericks and Yosemite are not support by Encore, but I believe users are getting them to work.
    Many of the issues in Mavericks appeared to be permissions. Most Adobe apps need read/write access, and those were not the defaults for the OS.
    Some Mavericks users reported the following fixes their problems - I eventually assumed that somewhere in the process, it was fixing permissions. But perhaps it does more:
    http://forums.adobe.com/message/6109315#6109315
    And comments for these operating systems for Premiere Pro, Adobe Media Encoder, and After Effects may be helpful. (Encore does not have a support team that is active, so nothing official for it.) But there are specific bug fixes for these OSs in CC versions, so....
    Monahan re Premiere permissions
    http://blogs.adobe.com/kevinmonahan/2014/09/10/premiere-pro-cc-freezing-on-startup-or-cras hing-while-working-mac-os-x-10-9-and-later/
    Kopriva re permissions and AE primarily:
    http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml

  • DVDs burned with Encore CS6 won't play in PC/MAC standard player

    Wondering what is going on with an issue on Encore CS6 (W8), as it will burn DVDs that work with PowerDVD but not with OS X's default media player or Windows Media Player
    Same computer earlier this year with Encore CS5.5 (W7), DVDs would read in WMP as well
    No problem with blu-rays

    What brand of blank, and what burning speed?
    Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)
    Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as the box label (Memorex is notorious for buying "anything" and putting it inside a Memorex box)
    When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your burner has the best chance to create "good, well formed" laser burn holes... since no DVD player is required to read a burned disc, having a "good" one from a high quality blank will help
    Use Taiyo Yuden single layer or Verbatim Two layer Or Falcon Pro for inkjet printable Two layer

  • Problem with Encore CS4 (and Windows 7, possibly)

    Greetings:
    Anybody else having this problem? First I'll get my system blood work out of the way. It's a brand new HP Pavillion.
    Windows 7 Home Premium (64 bit)
    8GB RAM
    Over 700GB of FREE harddrive
    Intel Core 2 Quad Q8300 @ 2.5 GHz
    Video Chip Set: Intel G45/G43 Express Chipset
    I have ensured that everything is updated. This includes:
    All CS4 Applications
    Windows 7
    My Graphics Card Driver
    My Display Driver
    I have also updated the Roxio PX Engine to V4.18.16a. I had read on a forum that Encore uses this driver and it should be up to date.
    OK, the problem, which I can reproduce with the simplest Encore project:
    1.     Start Encore
    2.     Create a new project - specify DVD - everything else id default.
    3.     Create a timeline
    4.     Import asset. It is a simple Standard Video AVI file, 720x480.
    5.     Select timeline for editing
    Here's what happens:
    A) Monitor window behaves normally. I can click play and watch the imported video. Sound is fine, everything is fine. I can start and stop the play back freely. All is well.
    B) Now, I can do a number of things to create the problem I am having. The simplest is to just go to the timeline editor, select the AVI asset that has just been there, running fine, and remove it from the time line. At this point, the monitor window's internal frame that used to represent the video view port area, disappears. By "disappears", I mean that the Monitor window goes to the background color which is used for empty, unused window regions. What had been there before was a jet-black frame representing the video view area
    Now, if I go to the project window and re-select the AVI asset that I was just viewing and put it BACK into the timeline, the Monitor does not restore. If I play the timeline, the monitor is still blank, although I can hear sound.
    In addition to this, I also find that Encore has slowed so that response to the simplest operation is extremely slow. It doesn't crash, although, it might if I hang around long enough - but I don't. If I shut down Encore and restart it, it will work OK until I start manipulating video assets again and then the same thing will happen.
    I should mention that, yes, I have this new computer but I was using Encore on an older and much slower XP system with less memory and drive space and I had no trouble with encore. I should also point out that the AVI assets that I use to produce this problem are the same ones I had used successfully on the older system.
    Is there anyone out there that would find this problem familiar? Anyone find a solution?
    Thanks in advance to anyone that responds.
    Mark Roberts
    Toronto, Canada

    Hi John:
    Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
    There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
    I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
    Thanks for your help though and if you have any other ideas, I'm all ears.
    Mark

  • HD2SD workflow still required with Encore CS6?

    Hi,
    I'm still use Dan Isaac's HD2SD workflow for creating DVDs in Encore CS5.
    I just wondered if Adobe has improved encoding in CS6 or if this workflow is still necessary?
    Cheers.

    Hi,
    Looks like you are using the older "frame server" method that creates an MPEG-2 file. I'm using a newer method - from Premiere, I export to an .avi file using the Lagarith Lossless codec, with YV12 colorspace. I then run an HD2SD script on that, and the resulting SD .avi file goes to HC Encoder using  -
    avisource ("SD filename.avi")
    I don't have the script handy right now, that is at home, but if you want to private message me, I can share later
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • Anyone running Portal with NOARCHIVELOG mode in the Oracle DB?

    Although we have several high-volume SQL Server customers running their DB in simple recovery mode (no transaction logging) with success, I am trying to determine if anyone is doing the equivalent with Oracle DB.
    Even if you aren't using NOARCHIVELOG mode, please let me know your thoughts on performance, especially since the perception exists that the Portal is less performant on Oracle DB than on SQL Server. If that perception has any basis in reality, there should be an even greater potential for performance gain using Oracle DB, through intelligent tuning.
    The cons of NOARCHIVELOG were pointed out to me by an excellent DBA:
    1. Lose the ability to do hot online physically backup, (both RMAN and Manual)
    2. Lose the ability to do point in time recovery of your database (irrelevant to the Portal)
    3. When something bad happens to your DB, you are guaranteed to lose some data, because you can only recover to last good backup. (This is either acceptable to the business or not. Usually it is.)
    Thanks for your thoughts!

    There are no dumb questions. 'Better' or 'worse' can mean different things from different angles. I won't recommend something to a customer that I saw in an article somewhere, or gained knowledge via hearsay. I have to have tried it successfully with a customer, usually though iterative tuning, testing and monitoring cycles.
    With that said, I see nothing wrong with using NOARCHIVELOG mode for the portal, and am looking to find someone with experience using it with the portal; and I don't mean a portal with four communities and a scant thousand users. I am looking for something more on the scale of our mutual customer who had about 15 front end portal servers, and about 15,000 hits per hour. Who, incidentally, is happily using SQL Server in simple recovery mode, and was game to try it out in the first place.

  • Anyone having trouble with Photoshop CS6 with Intuos3?

    I've been using CS6 since just after the Beta was released and I like many of the new features. I would probably love the software if not for one huge problem I'm having... no pressure sensitivity with my Intuos3.
    My Intuos3 works fine with CS2 and CS3 but not with CS6. I even unistalled all versions of Photoshop except for CS6 in case there was some sort of conflict going on but still no pressure sensitivity. Reinstalled CS3 and it works fine in that application, and still not in CS6.
    Does anyone else have this issue? I believe it must be a CS6 issue and not an Intuos3 issue for the fact that my tablet works just fine with previous versions of Photoshop.

    No, Wacom tablets are working fine for most people.
    Those who've had trouble found that updating the driver or reinstalling the driver solved the problem.
    If you continue to have trouble, you probably want to contact Wacom and have them help you troubleshoot the driver.

Maybe you are looking for