Is anyone successfully using Logic Pro with a Thunderbolt RAID?

I am having hanging issues before recording which I would like to narrow down possible causes - thanks

Similar Messages

Using Logic Pro with Reason 3.0

I am trying to use logic Pro with reason 3.0. I want to be able to sync them together to use redrum within reason as my drum machine. I am using a MOTU 828 mk II audio interface with 8 in's and 8 out's.
When I start logic first and the reason I am not hearing any sound from reason. I can see the meters move in the mixer of reason but I hear nothing.
From the standard documentation that comes with Logic all I can figure out is that rewire is there to sync any other rewire program so that can run side by side of one sequences transport controls.
I want to be able to hear audio from both my arrangement in Logic and in Reason at the same time in the same song in sync.
Can someone please tell me firstly if this is possible and if so how can I implement this kind of setup.
Thanks in Advance.
amerretz

Common problem. LP doesn't rewire 'out of the box'.
There are two ways to do this (well, more, but I'll tell you 2)
1 (Easy Way):
Restart Mac (Just to be sure things are sorted, not everytime)
Launch Logic
Launch Reason
Arrange Window
Choose a Channel> Pan Left
Go to the Middle section of the Parameters on the Left
With the Channel pop up menu, select Rewire> RWMix L
Repeat for the Right and away you go.
2 (More Advanced)
Environment Window
In the Middle section of the parameters on the Left select Create
Name it Rewire
Under that windows "New" pull down (Top Left), pull down to Audio Object
In the "Channel" pop up (Left, bottom section) select>Rewire (Left, right, 3,4... What ever you want.
Double Click the Audio Object to expand it
Pan Left or right, or whatever you need.
Rename if you wish
Do the same for the other stereo sideNow's the fun part. Assign these stereo pairs to a bus (above the fader, the default is "Out 1-2")
Go to the Mixer window
Double click the Bus you assigned, this puts it in the arrange window
Arrange window
Name the Bus "Rewire" or "ReDrum" or something great like that.
Now you can use it like a stereo pair (which I wish Logic had) for automation and effects and such.

Has anyone successfully used OSX Lion with Logic 8, a Digi002 and Digidesign's Coreaudio? Need to know for iCloud update.

I need to upgrade to Lion for iCloud and to shift my mobile me iDisk to iCloud in order to save the content I have and need to share.
Anyone using Logic 8 with this? I want to be sure, as I can't afford to upgrade everthing just yet.
Thanks

I can give a partial answer.
If you're installing Lion over the top of Snow Leopard Logic should be fine, it you're going to run a clean install of Lion, Logic 8 will not install but will run if you can copy it over from a working SL install.
Update: This thread has info on how to install Logic 8 on a clean install of Lion.
https://discussions.apple.com/message/18270040#18270040
The other issue are Digi's Core Audio MIDI drivers, they don't seem to be Lion compatible yet so while you may have the audio part of the interface working with Lion, you have to remove the MIDI drivers or Logic chokes while booting up. (unless there are new drivers I don't know about) Perhaps others have more info on the Digi situation.

Can i use Logic Pro with Macbook?

My Macbook is 2GHz Intel Core Duo with 1 GB 667 MHz DDR2 SDRAM... Can i use the Logic Pro 8?

But it works with 1 GB of Ram? To buy new memory for this computer here in Brazil is very hard and expense... Thank you!

Issue using logic pro with bfd 2.0 - not enough RAM?

Right, I posted a little while ago when I first installed BFD 2 on my mac pro, and was having problems whenever I tried to use any effects (either in Logic itself or in the BFD 2 program) whilst using BFD 2. What I think I forgot to mention was I was trying to do different processing on different "areas" of the drum kit, and I wanted to use the Logic effects, so I had a number of tracks with BFD 2 loaded as the instrument.
Well, I phoned a local Apple-certified shop to ask for advice on this, as nothing I'd tried had fixed the issue. The guy suggested I try a clean install of the OS and Logic and BFD 2, to see if that fixed the issue. I* have done this, and logic now works with BFD 2 and effects when I have just one BFD 2 tracks, but as soon as I add another and program some MIDI notes into the 2nd instance, even just a bar or two, then play the whole song, there is a large amount of digital noise. Now, on my mac pro, i only have one HDD - the system disk - and 4 gb ram. I had just now come to the conclusion that, with the minimum spec for Logic being 1GB, and for BFD 2 being 1GB, with the OS running as well it's actually likely the system is short of RAM. But now I see that it can also be an issue if your Logic project is stored on your system disk.
So I'm thinking of getting both an extra, internal (SATA) HDD, and an extra 8GB RAM at least. Is this likely to solve the issue? I'm not currently using an interface with it, and as I say, with just one BFD 2 track, it's fine, the issue is caused when I try to add more BFD 2 tracks. Obviously, without an interface, I am unable to try recording audio to see if there is an issue with that too.

You also need to upgrade to the latest version of BFD2. There were many fixes. You should also install BFD2 samples on another hard drive. The 4 gigs of memory you have is more than enough. Your main problem is probably not installing the samples of a separate drive. Hope this helps. BFD2 is an incredible program once you have it set up properly. As noted previously switching from 24 bit to 16 bits will help also.

Is anyone successfully using Netgear WN3000RP with Airport Extreme?

Got a brand new WN3000RP wifi range extender. I went through the installation several times myself and several times with tech support to no avail. Tech support told me to return it for a new one.
Everything is connected and the install process goes smoothly but I ultimately cannot ever use the extended network to connect to the Internet. I can see the range extender's mac address on the router but the two devices don't seem to talk to each other.
I'm just wondering if I'm going to have the same problem with a new one or not and wondering if it's even compatible with Airport Extreme routers.
I'm using Airport Utility version 6.1.
Can someone out there can let me know if they got this device working with their Airport Extreme?
Also, what are my other options to extend my range?

I know this answer is likely too late to help but it may help users in the future. In the situation where you are using a range extender there are a few things you need to confirm to make sure it is going to function properly and also some best practices to make sure your network is running smoothly.
1. Is the range extender using the router for DHCP? I have found in my experience is that the router should "reserve" a MAC Address and IP for the the Range Extender. Most times it is 192.168.1.2. I would first set up the router to have the range extender have a set IP Address of 192.168.***.2 and add the MAC Address to the list so that the Range Extender has a Static IP Address in the private network.
2. Initially set the range extender to have an SSID(Wireless Network Name) different than the Router's(Airport) SSID. This will allow you to determine if the Extender is functioning normally without it interfering with your existing network.
3. At this point it is important to set the Range Extender DHCP. What this will do is let the range extender request IP Addresses, DNS(Domain Name Servers), and UPNP Requests. This is where I feel that a lot of people are having issues and assume that the router will still resolve DHCP. If the SSID and Wireless Channel are the same your network will work intermittently with internet access until it is configured correctly.
4. For Devices that will stay on your network such as NAS(Network Storage), Smart TVs, Apple TVs I would recommend setting Static Private IP Addresses for each of them. Such as 192.168.1.3(NAS), 192.168.1.4(Apple TV), 192.168.5(Smart TV). Also if you enter the MAC Address for each device when you set this up it would be recommended.
5. If devices are having issues connecting to internet or certain web services are having issues. It may be necessary to set the Extender(Which is now handling DHCP with IP, DNS, and UPNP passed through from the router) as the Gateway for which device may be having issues. For instance if the Apple TV is having issues communicating on the network(Air Play, Sharing, Streaming) set or configure the network settings manually on the Apple TV. The IP Address would be the one your reserved on your router. The Subnet Mask would likely be 255.255.255.0 by default unless you have changed the amount of potential "Hosts" on your network. The Gateway would be the IP Address of the Extender(Which is paired with your router). DNS servers should be handled automatically. In some situations with certain devices you may need to use a DNS Service for Streaming, but this generally isn't needed.
A Visual Representation would be
ISP>Modem if needed>Router(DHCP Enabled and MAC Addresses Reserved)>Localized Devices<Range Extender(DHCP Enabled and Static IP Address 192.168.***.***)<Apple TV(Manually Configured IP Settings and Range Extender set as Gateway)<Other Devices Localized to Range Extender but not in range of Router(AirPort).
In this representation you should be able to have the router and range extender broadcast Identical SSID and Channels(Radio Frequency). This also allows for advanced settings to be put in place such as LAN networks or Subnets.
An issue that may come up is communicating with the range extender or router while setting up the network. A simple workaround that will allow you to configure either if the network doesn't let you connect on a MacBook is to go to System Preferences>Network>Wifi or Ethernet>Advanced>TCP/IP in configure IPv4>Set Using DHCP with Manual Address> Then IP Address that corresponds with your current network 192.168.***.*** but is not the same as the gateway, router, or reserved devices. This will allow you to connect and configure devices even if router or extender is not assigning IP addresses or operating properly.
Disclaimer* This advice is only for informational purposes with no warranties expressed or implied.

Is Anyone Successfully Using DNxHR CODEC with CS6

Just downloaded the HR 4K CODEC today http://cdn.avid.com/Codecs/LE/2.6.0/CodecsLE_2.6.0_Win.zip
Trying to do a test export, but it hangs at 0%.
Anyone else try this yet?

tested it in premiere 8.2, seems to work ok, but was slow as it was using quicktime 32 bit. was able to export and re-import the video back into premiere and it read it ok. not sure why it wouldn't work in cs6, do you have the latest version of quicktime installed?

Audio input, Logic Pro with Lion

When I change my Audio input, I have to reboot my computer for the change to work. I am using Logic Pro with Lion on a macbook Pro. I am switching between a Mbox Mini3 and a Blue Yeti Mic. Is this normal?

What happens if you disable, then enable "software monitoring"?
I would imagine it has more to do with Avid's Core Audio drivers for the MBox.
Also, this is a personal preference: I never have the Mac using the pro-audio interfaces, only Logic.
In Audio-Midi Setup and in System Preferences/Sound I only have "Built-In Audio" selected, my recording interface is for use with Logic only.

HI. ... Anyone know of any issues with using Logic Pro music software with Mountain lion OS.. I have heard rumours in the past is that all sorted now?

HI. ...
Anyone know of any issues with using Logic Pro music software with Mountain lion OS..
I have heard rumours in the past is that all sorted now?

At least Logic Pro 9 and Logic Pro X work correctly in Mountain Lion. Furthermore, Logic Pro X requires the latest OS X Mountain Lion version

I am trying to use logic pro 9 on my lion system and it continues to say I have a bad midi...when i go to check my midi drivers folders in my library its empty...does anyone know whats going on?

i am trying to use logic pro 9 on my lion system and it continues to say I have a bad midi...when i go to check my midi drivers folders in my library its empty...does anyone know whats going on?

I
got your message about making sure to use the machine specific disk that came with my machine. Unfortunately, Apple no longer sells Tiger replacement disks. I've got a couple of bids out on ebay, and will update when I have news to add to this post.
Thank you for your help, Frank!
To be clear you called the 800 number and explained what the situation was, old machine and lost the original DVD's?
Just checking because if you just called and tried to buy the DVD's they might tell you they no longer sell them but you aren't really trying to buy them your trying to replace the ones that are missing.
Ebay may work but there is a certain specificity to the DVD's required which, even if they seem right, might not work.
Good luck either way. If you get a chance when you get the DVD's I'd be interested in hearing how it all works out.
regards

Can I use Logic Pro 9.1.6 on two computers with one licens

I have download and install Logic Pro 9.1.6 on my MacBookPro 13". I record on location with my MacBook an wil edit and arrange the music on my iMac at home. Can I use Logic Pro 9.1.6 on two computers with one licens. I'm the owner of both computers. If it can where can I find the program on my MacBook? and how to install and register?

Hi, is the iMac also 10.6.8? I had an iMac die when 10.6.8 was installed, it worked at first but after some You Tube flash videos the screen just locked and no mouse clicking anywhere did anything. It turned out that most older iMacs [ mine was from august 2007] have a graghics chipset that can't handle Snow Leopard, there were [are?] 77 pages on this "locked screen"topic in the Snow Leopard forum. I checked out a web site that tells you how much your mac is worth by filling in the sereal number-mine was worth only $168, I may give it to a friend for his children to play with, although that seems unholy. I doubt anyone woud buy it,the problem is now so well known that even Apple certified resellars here in the Netherlands refuse to repair them,they claim Apple will revoke their certification if they replace the faulty Graphics unit,it is also VERY hard to get to that unit in an iMac, everything is so tightly packed inside.
If your iMac is running Mountain Lion[10.8.0] you may have to change the app store preference to accept apps from all sites,normally ML will only allow app store apps to be downloaded.

You can't use this version of the application "logic pro" with this version of os x

After installing all of Logic Studio (i.e. install dvd, audio content 1-3, jam packs 1-3), my laptop concludes that everything is installed successfully, however, when going to open to Logic, error icon appears and says:
'you can't use this version of the application "logic pro" with this version of os x'

Thank you! I found that just after I entered the question. I reinstalled everything two times, updated software, but was still having issues. But, I specifically updated the 9.1.8 (which was supposedly included in my standard software update). Guess I needed to give it some extra attention and affection.
P.S. - Why do I feel like the more I upgrade versions of OS X, the worse off I am getting or am? Isn't it supposed to be opposite...isn't it supposed to make things better...come on, mac...where you at? mt. lion or mavericks. I'm downloading Snow Leopard to make some programs run. (um, yeah).

Does anyone know if apple's one-to-one program would be a good way to learn how to use logic pro or am I better off going to school to learn audio engineering or something?

Of course going to school would be a good option, but I want to know if one-to-one is also a good way to learn how to use logic pro. Has anyone been through the one-to-one program for logic pro and can say that they learned how to use logic pro well because of it?

For sure, one to one training, if given by a tutor who is capable, will hand you the means to build up self-confidence and will therefore let you operate the hard/software in an intelligent manner, instead of going for the trial and error method which has its pro's and con's too. Once you've passed this beginners phase you will make your own decisions intelligently and then you will also start to get experience and learn even from your mistakes. Something like that in theory and the rest is up to you!
Have a nice day

"Can I use Logic Pro in my new imac with 2.66 intel core 2 duo"

Can I use Logic Pro in my new imac with 2.66 intel core 2 duo? With the new leopard operating system?
I have a 002 rack from digidesign, that should be good running with a logic pro 8 DAW.

Can I use Logic Pro in my new imac with 2.66 intel core 2 duo? With the new leopard operating system?
Yes. Click here for more information.
(40435)

Hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help :)

hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help

Friedrich sp wrote:
Can you send me a mixer wich can do that, please ?
Who do you think I am? Santa Claus?
What you need is not a mixer, but an audio interface with at least 4 mic inputs. There is a lot of choice there, but you should indicate a budget. You can go from, say, € 300 to € thousands, if you want.
Roland UA 1010
Focusrite Scarlett 18i8
However, there are other options (like multi-out mixer plus multi in interface, or standalone mic preamps plus interface with 4 inputs, etc). I have little experience using these however so I really cannot say much about which one(s) to get. The two mentioned above both have four mic preamps, but they are by no means the only way to do it.
The cheapest solution I can think of is to get a second 1204USB, plug it in, and in OS X create an Aggregate device (=the two are being merged into 'one virtual' interface with two discrete stereo (= four discrete mono) inputs. Disadvantage: you keep the same (limited) soundquality of the 16 bits convertors. Getting any of the interfaces mentioned earlier will also mean you'll make the significant step up from 16 to 24 bits sound.

Is anyone successfully using Logic Pro with a Thunderbolt RAID?

Similar Messages

Maybe you are looking for