Is anyone using iMovie 08 for editing footage from a Canon 5D Mark 11?

I'm interested to converse with anyone that is using iMovie 08 to edit Movie files from the Canon 5D Mark 11.

HI Stephen,
I have iMovie 09 on order hoping that it would alleviate this issue - sounds like it does not. Similarly to you, my footage imports fine, but the application crashes when the curser is moving over the video. I am lead to believe that iMovie just cannot cope with the high resolution of the 5D Mark 11.
I have tried the same files on other Macs and the same issue occurs, so it is not my machine or software issues on my machine. All of my software is up to date - except for Quicktime. I am running 7.5.5, so don't bother trying to roll back from 7.6 because it will not help.
I have also tried the footage on Final Cut Express and it crashes that application as well. I understand the Final Cut Pro can work with the files. At this stage I presume that Canon 5D mark11 users cannot edit footage on iMovie or FCE and possibly some other applications.
Let us hope and pray that Apple and Canon can sort this out!
Scott

Similar Messages

Can Premiere Pro smart render footage from a Canon 5D mark III ?

I already read that Premiere Pro can smart render certain codecs. But I want to know exactly: Can it smart render the video from a Canon 5D mark III?
In case smart render is not very specific: I'm asking if it can export the footage after cutting without rencoding it by just saving the individual frames into a new video container with the same codec. This should increase export time alot.
I'm asking because I have Premiere Elements and this feature would be the only reason for me to switch to Pro. I currently need 40 Minutes to render 10 Minutes. As a journalist I need to be faster.

Do you have any other tips how to boost export speed? I don't need the video to be small. I only do a raw edit where I cut out the junk. Quality loss should be minimal and speed ist most important.
Its hard to know if your export speed is normal or otherwise without some detail from you for comparison.
Hardware, system, OS and current export settings and times etc..
Generally the system and set up will determine the speed and editing experience.
5D footage should be no problem at all to a decent system ( and setup)
If you do a test export for us...tell us how long the export takes for how much footage . eg 1 minute footage = X export time.
No Effects.

Anyone using iMovie 6 with OS 10.5.3

Anyone using iMovie 6 with OS 10.5.3
I am now using iMovie 06 and iDVD 08 with OS 10.5.2 on a MacPro (working fine).
I would like to here from a 10.5.3 user before getting 10.5.3
Thanks.

thanks Bengt.
I've never done video editing so this is new to me. was surprised at how easy it was with the test video, in this case, being a "flipvideo camcorder" the first step is taking the video clips and then making them into a movie - hence the need for imovie 6.
I will have to now actually read the instructions for doing the next step of editing. initially just wanted to see if it worked with the FLIP cam. now I can have fun learning something totally new.
first think I'm going to do is check what format iMovie6 saves the movie in. the clips are AVI. The tech said they could be saved to another format, but haven't gotten that far yet.
thanks
Sue

I imported some 24P HD videos from my DSLR to Aperture but these videos do not show up in iMovie '09 for editing purposes. Although my previous 24P HD Videos from iPhoto '09 show up. Why can't I access these videos stored in Aperture library?

I imported some 24P HD videos from my DSLR to Aperture but these videos do not show up in iMovie '09 for editing purposes. Although my previous 24P HD Videos from iPhoto '09 show up. Why can't I access these videos stored in Aperture library? I assumed that like the videos in iPhoto, I would be able to access the videos in Aperture through iMovie. Come on Apple! I am starting to get frustrated with your products here. And this is saying a lot when I have been using and loving apple products for the last 4 years.

Hi. My camera is a Canon 600D. And yes my videos are stored in the Aperture library and they are not referenced. Even then I tried to select all the videos in Aperture and clicked 'consolidate masters' and there was a messge that said all 'none of the files are referenced',... so they didn't need consolidating.
I also tried preferences> export> external video editor > choose > iMovie. And then right click on the video to edit with imovie. Even then the video didn't show up in iMovie. It seems like the only option for me is to import the videos directly to iMovie which means there will be two versions of the same file stored in my computer eating up space.
APPLE. What are you doing?

Anyone used BAPI/FM for LT03 create transfer order

Hi all,
Has anyone used BAPI/FM for <b>LT03</b> create transfer order based on delivery.
the BAPI/FM should accept <b>multiple line items for individual storage units</b>.
thanks,
Subba

thanks Amit....
But it would be helpful to know the usage of this FM....and if anyone has used in their program....
thanks,
Subba

I've been using iMovie '09 for more than a year and now .MTS files won't upload?

I've been using iMovie '09 for more than a year and each time I would plug in my SD card (using a card reader) the import box would open and I could select the clips I wanted to work with. Now, suddenly, today the import box won't open. Why??? I literally just used the exact same method three weeks ago and it worked fine. I have not done anything differently. Also, when I go to "file > import from camera" it only shows the built-in camera. What am I doing wrong? And how do I get my files? I do not want to download a converter of any time. I know there has to be a way because it literally just worked three weeks ago so I'm just trying to figure out why it won't work now.

Unfortunately, you cannot upgrade to Safari 5 or 6 on Mac OSX 10.4.11 and that is what you need to access iCloud (http://support.apple.com/kb/ht4759). I am not sure, but maybe you can install another and newer browser version of Firefox or Chrome to access iCloud.

Anyone using Photoshop Elements for Fashion Design

Hi,
I'm looking for software to help me in the Fashion Design Industry. I want to use it for my sketches. I am a beginner when it comes to Fashion Design and have no experience using Photoshop software. I had read somewhere that Photoshop Elements is a less expensive version of Photoshop. I read that it does 90% of what Photoshop does without the higher end pre -press printing capabilities. I also read that there is a book that will help you with the other 10% to achieve the full Photoshop capabilities.
1a. I would like to know is anyone using Photoshop Elements for Fashion Design?
1b. If yes, please explain in details what exactly are you using it for?
2a. Is there more than one version of Photoshop Elements?
2b. If so, what version do you recommend?
3. How easy is it to use?
4. Do you know of any books you can recommend that will help me with using the software for fashion design?
5. If you don't feel Photoshop Elements is the best choice, then what other software would you recommend?
Thanks

I've never used PSE for fashion design, but there is only one flavor of elements, not a variety of different versions. I would wonder about using it for this because it could make a lot of difference if you need to create output in CMYK form (for print) or to softproof (neither of which is available in PSE). You also can't create composite layers in Elements.
I like Elements a lot, but I would not say it's 90% of Photoshop, more like 70% and I would expect that people would use Illustrator rather than PS for most things to do with creating illustrations. Also, there is no book that can make PSE into PS, although you can extend what it can do, but Adobe has deliberately crippled certain features in PSE.
I would say we need to know what you need a program to do to be able to give you any useful kind of advice. If you need to be able to draw vectors and paths, PSE is not a good choice. If you just need to sketch, it's fine.

I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

Thanks for you reply.
But actually I don't want to show the \ (backslashes) to the user in my text box.
Ok let me elaborate this problem little more.
I want to show my text box as it is in normal editors e.g. In Matlab editor. There is a text box and on left side the gray bar shows the line numbers corresponding to the text. Further more i want that the user should be able to click on any line number to mark specific line as breakpoint (red circle or any graphical indication for mark).
Regards,
Waqas Ahmad

Has anyone used Macspeech Scribe for Mac? It is similar to Dragon.

Has anyone used Macspeech Scribe for Mac? It is similar to Dragon. Does it work and is it reliable?

This post by Karsten shows several of the major alternatives, including a free one.
I have no experiece good or bad with the one you mention.
https://discussions.apple.com/docs/DOC-3711

Anyone using Select Enterprise for Forte?

Subject says it all. We're contemplating using eith Select or Rational
Rose.
Thanks in advance
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Raymond captured my thoughts exactly. We were Select customers too and glad
to be Rational customers now.
-Martin
Raymond Blum <[email protected]> on 03/04/99 11:30:56 PM
Please respond to Raymond Blum <[email protected]>
Reom
To: [email protected], [email protected],
[email protected], [email protected]
cc:
Subject: RE: Anyone using Select Enterprise for Forte?
We were Select customers for a year and have switched to Rose. Select was
both a buggy tool and a buggier company! Their upgrade to V6 completely
changed the server requirements, pulling the rug out from under our feet.
Features we were promised were not in the releases we were sent...
Rose has been a godsend; the product has it's shortcomings but it is a level
above Select in both functionality & robustness.
The 3 times I've had to contact Rational tech support, they've been able to
provide me with a solution. Select's tech support were unable to get their own
product to work as advertised. ---Raymond
We have been using Select for over 2 years but have kept a watchful eye on
Rationals offering.
They seem to leap frog each other and have various pros and cons. My
personal bias is currently towards Rational Rose but you'll have to choose
based upon your own needs.
If you let me know what you need I can let you know what I think each tool
offers.
Cheers,
Jez
Jez Sygrove
Application Architect
PanCredit
PS* Standard disclaimer: The opinions I express are not necessarily those of
my employer.
From: Robinson, Richard[SMTP:[email protected]]
Reply To: Robinson, Richard
Sent: 03 March 1999 18:29
To: '[email protected]'
Subject: Anyone using Select Enterprise for Forte?
Subject says it all. We're contemplating using eith Select or RationalRose.
Thanks in advance-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Sent from my PalmPilot.
The best thing since the Mac Plus!
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

What is the best program to use on Mac for editing, cropping photos from my computer. Looking for a free program that is good.

What is the best program to use on Mac for editing, cropping photos from my computer. Looking for a free program that is good.

If your needs are limited to those tasks then both Preview and iPhoto will fit the bill They are already on your Mac. There is a free download from Google called Picasa available here:
http://picasa.google.com/
It works much the in same manner as iPhoto. For some really heavy duty work there is GIMP available from SourceForge:
http://www.gimp.org/macintosh/ Also a free download.
Message was edited by: kennethfromtoronto

Edited footage from AE not playing correctly in PPro CS4

First- I'm a novice.
I captured footage from a Canon GL2 (shot on the Auto settings) into Premiere Pro CS4 that was shot in front of a blue screen. In the timeline, I selected the blue screen footage (avi file), photo for backgroundn (jpg), and audio, right clicked and choose the After Effects Composition feature to create a DynamicLink. In AE, used KeyLight to correct background. Then I clicked save. In PPro, the link is updated but when I play it, the video does not move with the audio. The video is much delayed in moving. How can I fix this? The frame rate is the same in both pre and post AE- 29.97fps.
Thanks-
Amy

Sorry I wasn't clear. I rendered the clip in AE and had the same video lag not matching the audio. I just went back and rendered the entire sequence in Premiere which resulted in the video in sync with the audio (yeah!) but all the video clips appeared to be a bit pixelated, not as crisp as prior to rendering. I may not be using the best way to render. I simply went up to the Sequence tab in the top menu, chose render entire work area.

Has anyone used Migration Assistant to move services from one system running Server to a new system?

So, I've purchased a Mac mini to replace my aging Mid 2009 mini on which I've been running Mavericks Server. In trying to answer the question of how best to move services from the old machine to the new, I've stumbled into the fact that Migration Assistant can apparently migrate not just user data for workstations and laptops, but also service data for servers. The problem is there isn't much detail in the docs about how good a job it does when going from one machine to another without changing OS releases. There's a very detailed document in the KB about going from older versions of Server to new (OS X Server: Upgrade and migration from Lion Server or Snow Leopard Server) and a general doc on migrating from another Mac under Mavericks (OS X: How to migrate data from another Mac using Mavericks) but that has no details about Server.
Has anyone used Migration Assistant to move services from one system running Server to a new system? Are there any details that are particularly important to get right? Are there things that require manual steps after Migration Assistant is done?
There are other ways I could tackle the problem, of course. I could simply swap drives between the systems, but the new system has two drives that are bigger, faster, and I intend to mirror them. That would complicate such an approach. I'd really like to keep the conversation constrained to a discussion of Migration Assistant as the primary method.

yes. I migrated a server frm lion to mavericks following these notes a while back:
OS X Server: Upgrade and migration from Mountain Lion
i do not recall having any problems with it.

I create an id. on review option when i enter visa card and security code, it always gives an error msg "Invalid Secruity code". but i use this code for money withdraw from ATM and for shopping also. plz tell the solution ????

i create an id. on review option when i enter visa card and security code, it always gives an error msg "Invalid Secruity code". but i use this code for money withdraw from ATM and for shopping also. plz tell the solution ????

The code they are asking for is the last three digits of the number on the back of the card (you don't use this when using an ATM or presenting the card in shops).

HT204587 I can't use touch id for purchasing app from iTunes in India

I can't use touch id for purchasing app from iTunes in India

Hi Love Apple,
If you are having issues with using Touch ID for purchases, you may find the following article helpful:
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
Regards,
- Brenden

Is anyone using iMovie 08 for editing footage from a Canon 5D Mark 11?

Similar Messages

Maybe you are looking for