Is anyone using 'niceshaper' successfully?

This program is exactly what I've been looking for. (a dynamic 'wondershaper'...?)
Has anyone got this working successfully with a p2p program?
if so, could a simple guide be wrote, most of the guide on the website goes over my head. :S
http://niceshaper.jedwabny.net/page/en/documentation
EDIT
should be in network section, oops.
Last edited by gav616 (2009-12-23 15:47:09)

Similar Messages

Blu-Ray Creator does not seem to work- has anyone used with success

I just purchased Blu-Ray Creator from the app store and it will not let me backup a hardcopy Blu-Ray disk onto my hard drive. Has anyone bought it and got it to work?

Hi abhi.p,
Thank you very much for your kind reply.
Yes, it does show the checkbox as checked if I use value="#{true}". However, it is checked permanently, user cannot uncheck it.
That's why I used the bean variable "#{pageFlowScope.fullExpressionEditor.categorySel.selected}".
The variable 'selected' is set to Boolean.TRUE in the bean. But in the UI the checkbox unchecked, strange!!
Regards,
-ab

Has anyone used VNC successfully with the portal?

When I try to connect to vnc through the portal (eg http://server:5803), I can view the correct login page, but get the error "java.net.ConnectException. Connection refused", yet it works when NOT through the portal. Anyone have any insight? Thanks.

Never tried VNC through the rewriter and http, but am not surprised at all that it won't work.
We have created a VNC netlet that works nicely.
VNC|/third_party/VNC-help.html|true|5900|TARGET|5900
Gary Beshara

What sustain pedal - exact make, model, type (momentary) is anyone using successfully on their controller? (I'm using m-audio)

what sustain pedal - exact make, model, type (momentary?) is anyone using successfully on their keyboard
? (I'm using m-audio controller)

I took an old Guitar cable, snipped off one plug, connected strand one to a metal plate and strand two to the metal part of a weighted lever. Plug it into the sustain port of my midikeybs. Press the lever onto the metal plate: sustain on. Let go: sustain off.
Even simpler: take a cable with a (mono) plug at on end and the naked two strands (mantel & core) on the other side. If you connect the two strands: sustain! if you disconnect the strands: sustain off.
What I am trying to say is: a sustain pedal is as simple as a doorbel button: on or off. So all that "the maker" can provide is "built quality", but really, any improvised simple momentary contact switch will do. In other words: there's really NO electronics to it, and if it is sold as a MIDI sustain pedal, it 'll work. But a doorbell button connected to jack cable will also work, so make and model (for a pure sustain-only pedal) are irrelevant.

Anyone use Citrix receiver (11.8.2) successfully on Yosemite yet?

Anyone use Citrix receiver (11.8.2) successfully on Yosemite yet?
I want to upgrade, but this is the 1 app that has to work for me before I take the leap.

DrDavidW,
After seeing your failed upgrade, I decided to upgrade one of my wife's laptops that had Citrix Receiver installed. The hardware is a late 2008 Macbook Pro 15" with 2.4 GHz Intel Core 2 Duo, 8 GB 1067 MHz DDR3 RAM, and 250 GB SATA Disk that has 212.99 GB free. Citrix version is 11.8.2. I used a bootable USB Yosemite installer to do the upgrade. My wife was able to log onto her Citrix Receiver without issue. I wonder whether it is a network issue rather than a application issue. I have seen some reports of wifi connection problems with Yosemite upgraders. Maybe someone in IT can help. Are you having any trouble with using Safari accessing other sites?

Dreamweaver CC mac is STILL unusably slow. I question if anyone using Dreamweaver CC mac successfully?

My setup is 3.4GH i7 iMac w24GB Ram and Fusion-SSD disk, running 10.8 (Mountain Lion), and Dreamweaver CC is still unusable. And from what I read on this site, many others have given up and gone back to CS6, like I have.
Very frustrating to lose days trying this or that to speed Dreamweaver up. It appears this is just now a bloated Pig that checks for too many things and have timeout issues somewhere.
I now question if Adobe has ANY users successfully using this program?

A lot of people are using CC successfully. Everyone's system is different. Slowness can be caused by various things including but not limited to:
network drives,
backup software,
anti-virus software,
GA Tracking code,
null protocol links // to scripts on 3rd party servers like Typekit.
Google Ads,
CSS @import,
code validation errors
If none of the above are relevant, try Deleting Corrupted Cache in DW
http://forums.adobe.com/thread/494811
If that doesn't help, try Restore Preferences
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
If all else fails, use the CC Cleaner Tools below followed by a software re-install.
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Also ensure that you have Java SE 6 runtime. Yosemite ships with 8 but that won't help you with DW.
Java SE 6 Direct download:
http://support.apple.com/kb/DL1572
Nancy O.

GTX 700 series-anyone using on Mac Tower successfully?

We have been using GTX680 cards on our numerous 12core macs running PPro.
We have another 12core which needs new gfx card. GTX680 can't be easily found anymore. So looking at 700 series...but can't find any info for Mac. Nvidia does not specify Mac or PC for 700 series. I see the newest iMacs are shipping with the 700 series.
Thoughts? Anyone using gtx700 series on Mac?
We are running latest PPro...OS-10.8.5...not mavericks.
Thanks for any input.
philc

philc452 wrote:
Should I be concerned?
Currently upon Boot Up I only see grey screen until machine has finished power up. This machine is using GTX680.
Phil
An unflashed PC nVidia card in a Mac Pro will run at PCI 1.0 speeds, not 2.0. It also will not show you the grey Apple boot screen; nothing will show up until the OS actually begins booting. Meaning you'll never be able to do network restores, or boot off of other devices.
If you want a properly built Mac-enabled nVidia card, talk to this guy.

Anyone using an nNovia HD with their cam & FCP?

I'm interested in the nNovia drives but wanted to check if anyone has experience using them successfully with FCP. I searched the FCP & FCE forums and there were a few references to Firestore drives but none on nNovia.
I film live events and often have issues with tape length, so I'd like to go tapeless. I'm aware of the 2GB file size limits on the nNovia & Firestore units & can put up with that if they otherwise perform well w/Final Cut.

Well, with miniDV the maximum is 60 mins per tape @ SP. When I've got a Shakespeare production with intermission at t=90+ mins I have a problem with tape length. I've been double-teaming 2 cameras to deal with the intervals where I have to swap tapes & it's a pain in the butt not to mention the occasional problems with having to feed audio to 2 cameras from my mixer. Tapeless would be a great solution.
The Firestore automatically breaks the DV feed every 2GB and begins a new file automatically, sequentially numbered w/o losing any frames. The nNovia must do the same but before I lay out my hard earned $ I wanted to check to see if anyone has experience with them.

Discussion Forum Portlets - Anyone using in Production?

This is a followup to another post.
Is anyone using the sample Discussion Forum and Discussion Forum Admin portlets provided in WebLogic Portal 8.1 in a production environment? I've already received feedback from one person who had difficulties and decided not to use them, but I wanted to know if there were any success stories.

Bryan,
I also put a lot of weight in Tom’s posts; I am however convinced that contacting Oracle Support is a better solution for direct, bug related questions. I do, for example not doubt that his human tasks did not work when put in parallel flows. There might be workarounds, such as putting the human workflow stuff in a separate service, but to me sounds like a bug and bugs should be reported, analyzed, and fixed.
As you can see from my profile, I do not live in Poland so I do not know about the training situation there, but I have, personally, delivered five SOA Suite classes so far during 2007 and I know that I am not the only one running SOA training in Sweden. I might be wrong, but based on my own experience, I have assumed that the lack of training that Tom is experiencing is due to communication problems, and that contacting Oracle Education would sort things out. (Training in Europe tends to be given in the local language. A quick look at the web shows that the next 5 day SOA Suite training in Poland seems to be scheduled for November 19th.)
On the topic of frequent changes in interfaces as mentioned above, I agree that an update of the table structure in a database must never cause business process updates. If that is the case, the architecture most likely suffers from tight coupling. I never recommend anyone to use adapters direct from BPEL try to but use (coarse gained) services published on the service bus as much as possible to avoid such problems. For an introduction to SOA best practices see (for example) Dave Schaffer’s 7 Steps to SOA in SOA World Magazine.
I am sorry if you feel that my posts are not providing the level of support you where hoping to find. Perhaps it is our expectations community/forums vs official product support that differs. Regarding whether Oracle has figured it out or not, you do not have to trust me – take a look at what InfoWorld or Forrester are saying.

Best, 
Mathias

Has anyone used a USB device server with a DAQmx or NI-VISA USB device?

Hi,
I have an application where I need to communicate with USB devices (some through DAQmx, others through NI-VISA) that will be more than 15 feet away from the controlling PC. I could use USB-ethernet-USB dongles, but I also see that there are USB-over-ethernet device servers available (like this one: http://www.usbgear.com/computer_cable_details.cfm?sku=USBNET-400&cats=104&catid=187%2C188%2C104%2C65...). Has anyone used these or similar USB device servers successfully with LabVIEW?
Thanks,
JasonP

http://forums.ni.com/t5/Multifunction-DAQ/Does-NI-offer-USB-extension-solutions/td-p/381873
http://forums.ni.com/t5/Dynamic-Signal-Acquisition/Using-a-quot-USB-2-0-extender-over-Cat-5-quot-to-...
http://forums.ni.com/t5/Multifunction-DAQ/Can-I-use-a-USB-Extender-with-USB-6008-or-cDAQ/td-p/920361
Let me know if you have any more questions.
Product Support Engineer
National Instruments

Anyone using Antares Auto-Tune 5 with Logic Pro 8 on a Mac Intel?

I just bought the upgrade from Auto-Tune 4 to Auto-Tune 5 since v4 didn't work with the Intel machines, and I'm using a Mac Pro.
After trying to tune one simple part of one song, I'm going nuts. The plug-in is full of bugs, it seems -- mostly in graphical mode. Is anyone else either successfully using this set-up or experiencing major bugs with it?

I'm thinking it's an Intel thing.
When I try to use the various tools in the graphical view, the plug-in will just basically stop responding. I can't close out the plug-in window, and sometimes the "options" window of AT 5 will pop up for no reason and freeze. Its "cancel" and "OK" buttons are non-functioning at that point.
I've hard to force quit Logic a few times now, which pains me to say. Not to mention that it's setting my project back.
Antares doesn't have a forum, and I can't find anything else about this apparent anomaly online anywhere.
Unrelated: I've had problems with Drumagog in LP8 as well. If I try to drag the Drumagog pop-up window around the screen, the only thing that moves is the semi-transparent LP 8 "container". The actual Drumagog window stays put as the LP 8 window that frames the Drumagog window moves about. Very strange.

Help!! Anyone use IIS4 with developer server

Hello folks,
My current setup
NT Application server :
1) Developer server6.0
2) IIS4.0
NT Oracle RDBMS
1) Oracle8i
The commumication between between the 2 servers using SQLNET has
no problem. I tested it using the SCOTT/TIGER combination.
But I need to setup the web connection where the browser is able
to connect to the RDBMS server for queries and data retriever.
I have tried using the form server, which I found the following
documentations to connect to the RDBMS.
ORACLE_HOME%\tools\devdem60\web\readme.htm
Although the readme file is for OWA server, I attempted the
configuration with IIS4.0. I understand the only different is
the configuration of virtual directory. There is a part in
configuration inthe readme file about editing "registry.dat"
file. This file contain "funny" character which make it
difficult to edit. Not sure if I have done it right.
Nevertheless, the configuration process is done, but when I load
the web page to execute the scripts, nothing appear on the
screen on the web browser.
1) Has anyone been successful in configuring this part of the
scripts ? Please tell me wrong may has gone wrong.
2) Has anyone use webDB to be the interface for web to database
interface ?
3) Is there any documented way beside CGI to get connect to the
database via web ?
I appreciate any pointers
Thank you very much
Regards
Jason
null

Hello folks,
My current setup
NT Application server :
1) Developer server6.0
2) IIS4.0
NT Oracle RDBMS
1) Oracle8i
The commumication between between the 2 servers using SQLNET has
no problem. I tested it using the SCOTT/TIGER combination.
But I need to setup the web connection where the browser is able
to connect to the RDBMS server for queries and data retriever.
I have tried using the form server, which I found the following
documentations to connect to the RDBMS.
ORACLE_HOME%\tools\devdem60\web\readme.htm
Although the readme file is for OWA server, I attempted the
configuration with IIS4.0. I understand the only different is
the configuration of virtual directory. There is a part in
configuration inthe readme file about editing "registry.dat"
file. This file contain "funny" character which make it
difficult to edit. Not sure if I have done it right.
Nevertheless, the configuration process is done, but when I load
the web page to execute the scripts, nothing appear on the
screen on the web browser.
1) Has anyone been successful in configuring this part of the
scripts ? Please tell me wrong may has gone wrong.
2) Has anyone use webDB to be the interface for web to database
interface ?
3) Is there any documented way beside CGI to get connect to the
database via web ?
I appreciate any pointers
Thank you very much
Regards
Jason
null

Anyone using Elgato Video Capture with good results?

I've got some VHS tapes that I want to edit in iMovie '11 (and/or FCE).
Viewed on a TV monitor, the image quality of the tapes varies from acceptable to very good - but I am very disappointed with the quality of the video once imported, using Elgato Video Capture, to my MBP. It is very indistinct and washed out. Only the audio remains as clear as the original.
Anyone had any success with using Video Capture to convert old tapes?
Any advice and/or feedback would be much appreciated!

conran wrote:
Thanks Coolmax - I tried that, but no discernible improvement unfortunately.
These are the tech specs from the Elgato site:
Video resolution: 640×480 (4:3) or 640×360 (16:9)
Video format: H.264 at 1.4 MBit/sec or MPEG-4 at 2.4 MBit/sec
Audio: AAC, 48kHZ, 128 kBit/sec
I've tried both H.264 and MPEG-4 without much success. The resulting footage is always extremely grainy and 'muddy'. Any other ideas?
If I understand this correctly, Elgato can save your footage either in H.264 or MPEG-4 and you tried both. If the original file plays with ok quality and the resulting footage after being finalized by iMovie 11 look worse, I think we need to determine what are you finalizing to?
In "Export to Quicktime", you can choose the compressor to "none". Do this with a short clip as the resulting file will be big. Play back this video.
If there is a degradation in video, then you know it is iMovie 11 process that is causing it. From here on, you can further compress the video using Handbrake and adjust the settings to give best quality vs size.
There are software available on the PC side that can enhance and resize an already weak VHS captured footage and make it look better before you import it into iMovie 11. But this require quite a bit of computer horsepower to complete it in any acceptable time frame.

Does anyone use NVARCHAR or NCLOB datatypes?

I would like to know if anyone has ever successfully used the NVARCHAR or NCLOB datatypes in a real world Java application?
It does not appear to be possible.

Hi Martin,
Do not use the NVARCHAR/NCLOB datatypes with 8i. They do not
work as expected. Consider using VARCHAR/CLOB.
--Shirish

- it doesnt want to drag? Has anyone used this software with imovie?

I am trying to transfer vhs movies to my harddrive using videglide I have successfully recorded it and saved it onto my desktop but I cant seem to transfer the movie to iphoto for editing - it doesnt want to drag? Has anyone used this software with imovie?

I presume you mean Videoglide - which I had never heard of.
Having read the specs:
http://www.echofx.com/videoglide.html
I am wondering how it manages to digitise analogue video from a VCR. For that I use an analogue to digital converter that imports straight into iMovie via firewire.
You should contact the developers of Videoglide for instructions on how to use it.

Is anyone using 'niceshaper' successfully?

Similar Messages

Maybe you are looking for