Is anyone using VMware fusion and having trouble with USB devices not being recognised

I have an Terratec Axon AX50 Guitar to Midi interface. The editor software is not Lion compatible so I have attempted to run that bit in Windows 7 on a virtual machine.
The problem is that the VM machine will not recognise the USB device, even though when it asks which machine I want to connect to it names the device correctly.
Any Ideas ?

Device not recognized by iTune
http://support.apple.com/kb/TS1591

Similar Messages

  • I am having trouble with my ipad not being recognised in itunes when I connect

    Hi I need to connect to my itunes account with my ipad to manage content. I have an IMac and when iI connect via USB or WIFI itunes doesn't "find" my Ipad. I have had it for over a year and it has always worked before. I have read a lot of the posts on here and tried rebooting both, reinstalling, different leads and USB sockets (iphone picked up fine ) and nothing is working. Does anyone have any ideas as I'm stuck with a useless Ipad at the moment. I considered going to the apple store but from posts on here they seem to be useless as well. Thank you.

    Device not recognized by iTune
    http://support.apple.com/kb/TS1591

  • I have installed VMware Fusion but having trouble with Calyx Point software and was told Bootcamp needed to be installed.  Will I not have to uninstall Calyx, VMWare and Windows 7 prior to installing Bootcamp?

    I have just bought a new MacBook Pro and I really like it.  However, for my job I have to use Calyx Point software which has to be ran on the Windows side, so they sold me VMware Fusion software.  It works fine until I try to save a PDF or email docs.  I have called Calyx and they have advised me that bootcamp works.  I am wondering if this is going to help and since I have already installed VMware am I not going to have to uninstall that program, Windows and Point and then install bootcamp and reinstall Windows and Point?  If I'm beating my head against the wall, and just need to return the laptop, then that's what I will do, but I sure hate to as I really like my Mac.

    Checked VMware Fusion Community Forum?
    Most install Windows (natively) and then 'attach' the (Boot Camp) partition to Fusion.
    that way you can dual boot and run Windows natively when needed, and run Windows as a Guest OS VM under Mac OS.
    But.... and I don't know about Calyx, doing things like save pdf and email should work fine same as usual.
    Maybe there is something you didn't or need to do to Fusion (Tools or install Acrobat) or in configuring.
    I used Fusion but found I prefered running Windows natively at the time.
    If you do need to use one install in both manners, then you need to do through and partition your drive and reinstall Windows that way, and only then attach Fusion to it.
    If you need to run Windows for work, I'd exchange it - especially if you have only had it a couple days, and get another.  There are a lot of new laptops coming out in the next months that look nice, fast and won't have some of the issues you run into with Windows on a Mac.

  • I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need!  Anybody out there with a similar problem?  Help!

    I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need!  Anybody out there with a similar problem?  Help!

    Thanks - Of Course the first thing I checked and did.
    Disc Utility reads as follows:
    Capacity : 159.18 GB (159,182,127,104 Bytes)
      Format : Mac OS Extended (Journaled)  Available : 11.47 GB (11,472,896,000 Bytes)
      Owners Enabled : Yes  Used : 147.71 GB (147,709,231,104 Bytes)
      Number of Folders : 139,540  Number of Files : 511,832
    Activity Monitor(Disc Usage) shows something quite interesting.  Mac HD and Ramanan (Main User) - My hard drive is only 160GB!  Would the retired engineer gentleman please note as well.  Many thanks. Rams

  • Is anyone having trouble with their RAZR not ringing or only ringing sometimes? I also lose the use of any voice technology when this happens.

    Is anyone having trouble with their RAZR not ringing or only ringing sometimes? I also lose the use of any voice technology when this happens.

    What is going on with the motorola software fix?
    Tav Gauss CEO, President
    The Action Group, Human Resources Solutions
    252-237-3717
    1800-529-8470
    <http://www.theactiongrouphr.com/> www.theactiongrouphr.com
    PO Box 158
    Wilson North Carolina 27894-0158
    Follow The Action Group HR. Connect with us on  <http://capstr.at/Hd> Twitter |  <http://capstr.at/HY> LinkedIn |  <http://capstr.at/Hc> YouTube

  • Just bought a brand new Airport Extreme and having trouble with it being recognized. I have a Mac version 10.5.8. Is my computer compatible?  I have the Airport Express now and it works fine.

    Just bought a brand new airport extreme and having trouble with it being recognized.  My mac is version 10.5.8.  What should I do?

    The new AirPort Extreme needs the 6.x version of AirPort Utility, which comes packed in with Lion 10.7.5 or Mountain Lion 10.8.x......or......you can also configure the device using an iPhone or iPad running a recent iOS.
    From Apple's Specifications:
    Setup and Administration
    iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
    Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
    A few options.....
    Borrow another Mac running Lion or Mountain Lion for 10-15 minutes and set it up. The Mac running 10.5.8 will be able to connect to the wireless....but it will not be able to make any changes to the configuration of the Extreme.
    Update to Lion or Mountain Lion.....but check first to make sure that your Mac will support the operating system first.
    Use....or borrow an iPhone or iPad to set up the Extreme

  • Any one else having trouble with Creative Cloud not opening?

    Anyone else haveing trouble with Creative Cloud not opening? All I get is the splash screen and the :loading: symbol that keeps going around and around---forever.
    This just started ---.
    I am running Windows 8 on an i7 machine with 16 gigs of RAM. My internet connection is good---all other internet access opens just fine.
    Thanks
    gene

    Have you downloaded and installed the following updated Mountain Lion compatible driver and software for your model?:
        http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-107723- 1&cc=us&dlc=en&lc=en&os=219&product=4073738&sw_lang=
    Hope this helps

  • I am having trouble with my speakers not working while online in particular on windows.My audio works when playing audio files

    I am having trouble with my speakers not working while online particular on facebook. My audio works when playing audio files.

    Hi,
    Did it happen all the time or sometime?
    Please check online browser status:
    Click Volume icon in the taskbar, click Mixer link button as below:
    If it's fine, follow this guide to run troubleshooter to detect and fix the issue:
    Tips for fixing common sound problems
    http://windows.microsoft.com/en-in/windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=windows-7
    Meanwhile, this similar thread also could be referred:
    https://social.technet.microsoft.com/forums/ie/en-US/a4a1cfe5-93a5-4c0b-9bf6-f7db0304f2ba/no-sound-on-youtube-or-any-other-webpage
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

    I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't, and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

    Try leaving it plugged in and then restart the computer.
    If you are on Windows this link may help but it is a bit old.
    http://www.technologynext.org/error-usb-device-not-recognized-how-to-fix/

  • My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing called apple they did not know any help out there TX

    My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing i did not install any software before this happend i called apple they did not know, any help out there TX

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • I am physically disabled and having trouble with the sensitivity of the screen on my iPad mini - any suggestions?

    I am physically disabled and having trouble selecting apps because of the sensitivity of the screen - any suggestions on what to do?

    I would think assistive touch would be exactly what you are looking for.  It's engaged using the Accessibility method I described above.
    Here's the writeup about assistive touch from the iPad User Guide:
    AssistiveTouch AssistiveTouch helps you use iPad if you have difficulty touching the screen or pressing the buttons. You can use a compatible adaptive accessory (such as a joystick) together with AssistiveTouch to control iPad. You can also use AssistiveTouch without an accessory to perform gestures that are difficult for you.
    Turn on AssistiveTouch: Go to Settings > General > Accessibility > AssistiveTouch. To set Triple-click Home to turn AssistiveTouch on or off, go to Settings > General > Accessibility > Triple-click Home.
    Adjust the tracking speed (with accessory attached): Go to Settings > General > Accessibility > AssistiveTouch > Touch speed.
    Show or hide the AssistiveTouch menu: Click the secondary button on your accessory.
    Hide the menu button (with accessory attached): Go to Settings > General > Accessibility >
    AssistiveTouch > Always Show Menu.
    Perform a swipe or drag that uses 2, 3, 4, or 5 fingers: Tap the menu button, tap Gestures, and then tap the number of digits needed for the gesture. When the corresponding circles appear on the screen, flick or drag in the direction required by the gesture. When you finish, tap the menu button.
    Perform a pinch gesture: Tap the menu button, tap Favorites, and then tap Pinch. When the pinch circles appear, touch anywhere on the screen to move the pinch circles, then drag the pinch circles in or out to perform a pinch gesture. When you finish, tap the menu button.
    Create your own gesture: Tap the menu button, tap Favorites, and then tap an empty gesture placeholder. Or, go to Settings > General > Accessibility > AssistiveTouch > Create New Gesture.
    Lock or rotate the screen, adjust iPad volume, or simulate shaking iPad: Tap the menu button, then tap Device.
    Simulate pressing the Home button: Tap the menu button, then tap Home. Move the menu button: Drag it to any location on the screen.
    Exit a menu without performing a gesture: Tap anywhere outside the menu.

  • Edge Animation having troubles with iOS devices within Muse Site

    Hi All! I've been creating a mobile version of my website www.rinkdesigns.com and have it all complete. I created an animation/navigation bar within Adobe Edge Animate and imported it into Muse. It functions AMAZINGLY on my Nexus 4 (Android) in Chrome but on a buddies iPhone 5 Chrome only loads about 3/4 of the animation/nav bar, in Safari the animation does not load at all and half of the page background does not load either. Please check out the preview site here http://rinkdesignsmobile.businesscatalyst.com/phone
    Has anyone else been having animation/mobile troubles with iOS devices? Any hints as to how you fixed your errors would be extremely helpful! I also posted this question in the Muse forum and haven't gotten a response...
    Thanks,
    John

    Or, how about this:
    Does anyone know how to have Edge Animate objects that utilize "_top" in an open url trigger make the Muse site that they are a part of open a new window/tab with that action (as opposed to having it open the url in the current page, or using "_blank" in the trigger)?

  • Having trouble with iphoto, will not print full image

    Having trouble with iphoto on my laptop and desk top computers.  On laptop will not let me print full image and having trouble getting correct rotation to print
    On desk top printing too dark and cannot get correct rotation there either, seems like the problem just started recently

    Ronleedek-
    What App are you using with the microphone?  I've used Skype, which has a "test call" feature to check your microphone.
    There is a good chance your microphone is defective, possibly disconnected inside the iPad.  If an Apple Store Genius can not fix it, you may get a new iPad on the spot.
    Fred

  • Using VMWare Fusion and Vista for NetFlix Watch Now

    Hi, I have installed Fusion and Vista in order to use NetFlix's Watch Now feature on my MBA. The installation was easy and Vista seems to be working fine. However, I can't get the Watch Now movie going. The film will start (after NetFlix determines my internet speed, etc.) and alternate between play and pause. Has anyone used this combination with success? Would a downgrade to XP work better? Or I should just use Boot Camp? Thanks.

    I've used WinXP with Fusion on a MacMini and it was fine (but faster in BootCamp). I'm currently running Vista Business on a MacBook Pro in Parallels and while it isn't slow, it certainly is slower than in BootCamp. I expect Fusion would run Vista a bit faster - Fusion does tend to be a bit faster than Parallels but Parallels seems to get along better than Fusion with one of the applications I'm using.
    There are advantages to BootCamp and BC isn't incompatible with virtualization. I suggest that you go ahead and install Vista in BootCamp. If you haven't already bought Fusion, download the demo and see how it runs using the BootCamp installation and compare that to BootCamp itself. Then decide.

  • Downloaded new OS and having trouble with wifi, bluetooth Facebook and Skype performanc​e

    Dowloaded 10.2.1.537
    When I first loaded this it had a lot of trouble finding my Wifi again and would disengage.  Problem went away after a few hours but it recurred this am.  Also affected Facebook.
    Skype is loading more slowly and jumps to a black screen for 10-20 seconds.  Then it will load and function but only for a few seconds to a minute and then shuts off completely. 
    Launching Skype also resultd in my bluetooth headset being disengaged sometimes.
    Reinstalled Skype to see if that fixed anything. 
    Tried turning off bluetooth to see if that fixed the skype problem - nope still disengaged.
    Cycled my router and cable and still no fix...
    Running Z30
    Would love to get a fix on this.

    Hello,
    Given all of your issues, I'd guess that something did not go well with the update, and a clean reload would be in order. You accomplish that either through the LINK software or by obtaining an AutoLoader.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for