Is APEX3.2 support dot Matrix printing ?
Is APEX3.2 supports the dot matrix printing?????
Depends upon the environment you are running on.. If you are running on a Windows machine, the answer is : depends on if you have driver for the printer. Since your browser is the interface between you and the application, If you can print to the printer while on other websites, then yes it should work..
But, to handle the page breaks and formatting you will need to do some formatting and such in your report regions..
Thank you,
Tony Miller
Webster, TX
Similar Messages
-
11g Report supports Dot Matrix Printer ?
Hi,
We have 11g reports, with following Font;
Windows Font - Arial
Java Font - SansSerif
We have Billing with carbon-copy, so we have to print it on Dot Matrix Printer,
but printing is not of good quality.
When we print of Word,Excel documents with same font, its quality is OK.
I have tried other Fonts as well, but problem remains the same.
My question is, Can 11g Reports supports Dot Matrix Printer ?
Thnx/Regards,
Ben.Hi,
Have you tried applying Services Pack and Hot Fixes?
Please refer to the link for update and others,[ click here|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm]
Regards,
Clint -
Crystal Report Supporting Dot Matrix Printer
hi all.
Please tell me the crystal report's support for dot matrix printer , crystal reports are very slow on dot matrix.
RegardsQuestion is already answered in link
Printing Speed on Dot Matrix
Jeyakanthan -
Print PDF Report(XML) in Dot matrix Printer in Oracle E-Biz R12
Hi Friends,
Is it possible to print a PDF Report (xml report) in Dot Matrix Printer in Oracle E-Biz R12 assuming the Dot Matrix Printer supports Post Script.
If so , what configuration needs to be performed from Oracle E-Biz?
Regards,
DBuser4525564 wrote:
Hi Friends,
Is it possible to print a PDF Report (xml report) in Dot Matrix Printer in Oracle E-Biz R12 assuming the Dot Matrix Printer supports Post Script.
If so , what configuration needs to be performed from Oracle E-Biz?
Regards,
DBI do not think it is possible -- Please confirm with your printer vendor if your printer support PDF printing first.
Thanks,
Hussein -
Dot matrix printing on 15 x12 inch paper
Hi
I have created report for purchase register
Report is so large to print
so i have desiged this report in PDL for dot matrix printer and paper size 15 inch x 12 inch.
When i going to print this report, i not get proper print out
Please tell me the setting regarding to print this report on dot matrix 15 x 12 inch continous paper.
Regds
KishorHI
Thanks for you valuable suggestion
Printer at my end is not supported by SAP B1
ok
what is use of Function grouplinenum() in PLD
I wants the follwing output
docnum, Acct Code, Acct_total document_total
1 xyz1 500 1100
xyz2 600
2 abc1 1000 2000
abc2 500
abc3 500
Total 3100 3100
Please study the following query for above and Please tell me it is possible to design PLD
SELECT A.SERIESNAME, A0.DocType, A0.DocNum, A0.DocDate, A0.NumAtCard, A0.TaxDate,
A0.CardCode, A0.CardName, A1.City,
A2.TaxId11, A2.TaxId1, A2.TaxId2,
A4.TAXTYPE, A4.VATRATE, A4.vattaxable, A4.Totvat,
A0.DOCTOTAL, A0.WTSUM,
A5.TAXCODE, A5.formatcode, A5.ACCTNAME, A5.ACTOTAL,
(case when TAXTYPE IS NULL then A0.DOCTOTAL + A0.WTSUM ELSE 0.00 END) AS LabourChrg,
(case when TAXTYPE IS NOT NULL
then A0.DOCTOTAL + A0.WTSUM - ISNULL(A4.VATTAXABLE, 0.00) - ISNULL(A4.TOTVAT, 0.00) ELSE 0.00 END) AS LabourChrg
FROM NNM1 A
INNER JOIN OPCH A0 ON A.SERIES = A0.SERIES
LEFT OUTER JOIN CRD1 A1 ON A0.CARDCODE = A1.CARDCODE AND A1.LINENUM = 0
LEFT OUTER JOIN CRD7 A2 ON A0.CARDCODE = A2.CARDCODE
LEFT OUTER JOIN
(SELECT C0.DOCENTRY,
MAX(case when C1.nftaxid = -7 then 'L' when C1.nftaxid = -4 then 'C' else 'O' end) as TAXTYPE,
MAX(C0.TAXRATE) as VATRATE, SUM(C0.TAXSUM) as TOTVAT, SUM(C0.BASESUM) as VATTAXABLE
FROM PCH4 AS C0, OSTT AS C1
WHERE C1.ABSID = C0.STATYPE
AND C1.nftaxid in (-7, -4)
GROUP BY C0.DOCENTRY) A4 ON A0.DOCENTRY = A4.DOCENTRY
INNER JOIN
(SELECT E0.DOCENTRY, E0.TAXCODE, E1.formatcode, E1.ACCTNAME, E0.ACTOTAL
FROM
(SELECT D0.DOCENTRY, D0.TAXCODE, ISNULL(D1.ACCTCODE, D0.ACCTCODE) AS ACCTCODE,
SUM(D0.LINETOTAL + D0.LINEVAT + D0.DISTRIBSUM + D0.STCKDSTSUM) AS 'ACTOTAL'
FROM PCH1 D0 LEFT OUTER JOIN PDN1 D1
ON D0.BASEentry = D1.DOCENTRY AND D0.BASELINE = D1.LINENUM
GROUP BY D0.DOCENTRY, D0.TAXCODE, ISNULL(D1.ACCTCODE, D0.ACCTCODE)) AS E0
INNER JOIN OACT E1 ON E0.ACCTCODE = E1.ACCTCODE) A5
ON A0.DOCENTRY = A5.DOCENTRY
WHERE A.SERIESNAME ='[%0]'
ORDER BY DOCNUM
Thanks -
Sales invoice Smartform printing in dot matrix printer in sucession
Dear all,
I am trying to Print Sales invoice on Dot matrix Printer.
My First Invoice is printed ok, but if i try to print second invoice without manually adjusting the paper the alignment on printer goes haywiered.
Do we have some option in smartform where we can trigger new page command.
Regards,
Gaurav SoodHi Amiya,
you need to check the paperformat which is used. I'm pretty sure that there is a wrong paperformat selected. The supported paperformats are published in the official documentation of the printer-model.
~Florian -
SAP B1 not printing on Dot Matrix Printer
Hello everyone
I'm trying to print from SAP B1 2007B PL:00 to a Dot Matrix Printer connected in network.I selected the printer and gave print.But it is printing one or two junk characters only.When i try the same in a laser printer it prints well. What might be the problem and solution for this
Thanks and regards
RaghuHi
The following dot-matrix printers are supported by SAP Business One.
+ Citizen PROdot 300
+ Epson FX-880
+ OKI MICROLINE 320 Elite
If you are using the 2005 version you can use also the Epson FX-890.
Paulo Calado
SAP Business One Forums Team -
Crystal Report printing on dot-matrix printer
Hello,
I've developed an application using VB.NET and Crystal Reports in VS2008. The report generated gets printed correctly on modern laser or inkjet printers. However, the entire formatting gets affected when I print these reports on dot matrix printer. Apart from that. the print speed is very slow. I tried exporting the report to PDF, DOC and other formats - but no solution. There was Export to Text function, which is not working in Crystal Reports now.
After a research on this issue, I found out few links to some solutions - which actually doesn't work. These links are as follows:
http://social.msdn.microsoft.com/forums/en-US/vscrystalreports/thread/e24a8084-ad53-48bc-a7d5-065ef82636ac
http://social.msdn.microsoft.com/Forums/en-US/vscrystalreports/thread/dd506c66-4cdc-48a7-9fa8-2c6f14daef24/ (Same issue in C#)
I've seen some software, in which, when Print on Dot Matrix (custom menu option) is selected, data is sent to DOS mode and reports are printed from DOS mode.
Is there any solution for this? OR DOS mode is the only solution?
This is high priority issue. Even though we're moving ahead in IT industry, govt. still depend on 4 color dot matrix printer reports.
Waiting for solution
Regards
Mayur Tendulkar | www.mayurtendulkar.comAlso, as of Service Pack 3 Microsoft updated their security models so a new C++ runtime is required. Please see these Kbase articles and Forum posts for more info:
https://bosap-support.wdf.sap.corp/sap/support/notes/0001495319
Forum thread for info Setup And Deployment Problem
Info:
Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update and is available using the link below.
This needs to be installed before installing a setup package that uses the SP 3 merge modules.
http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-40ff-b072-9112bab119c2&displaylang=en
Thank you all again and have a great day
Don -
Horizontal Vertical and logo is not printed in dot matrix printer
Hi All
i am printing a smartform in dot matrix printer
the form has horizontal vertical line
table lines , and logo
but when i print in Dot matrix printer
the line and logo is not display
Please say me how i design for it
wheather It is printer or smartform design problem?
Regard
RitenHi riten,
The Printer settings is not supporting the horizontal and vertical line ..check with the basis team for the printer settings.
Regards,
Sravanthi -
Right side Text not printing in Dot Matrix Print
Hi Gurus,
When i take print of the smartform with Laser Jet Printer its comming fine , but when i print using Dot Matrix Printer the text at right side is not printing.
Printer model : Epson DFX-5000+
Can any one tell me how to resolve this..
Thanks
Ganeshhi ,
SAPWIN Drivers which support those Epson printers check in SAP (windows support )
These will solve your Problem .
Regards
Deepak. -
Printing of Graphics and Frames ,not coming properly in dot matrix printer
Hi Experts,
I have one smartform layout for Good receipt note,have used the Logo and Frames .when i am printing in the Laser printer.everything is k.when i am printing in Dot matrix Printer(OKI Microline 380 24pin printer).the Logo and Frames are missing,but I could able to see the Print Priview Properly.
Could you give any urgent solution.it is very urgent.
Thanks in advance.
regards,
hppI agree with you that printing of Logo & Framesare not very supportive in Dot Matrix Printer.
You can ask the Basis consultant to check & change the printer setting & may be it may work, as you have already mentioned that it is OK in Laser Printer. The Dot Matrix printer is currently unable to read the Logo & frame for printing.
Regards,
Rajesh Banka
Reward points if helpful -
Printing Invoice Dot Matrix Printer in the paper size 9.5 x 11 inches
Dear All,
Am using Pre-printed Stationery but I have a problem with printing configuration for AR Invoice through Dot Matrix Printer in paper size 9.5 x 11 inches, when command to print the first page it print perfect but the continuation is not start on the body of the contents but it start from the header of the pre-printed stationery any one with experience on this please share with me.
Regards
Graysonhi,
Have you customized PLD according to paper size ?
Check whether you customized fields in start of report area ? If yes then it will be printed
only on first page.
Check for printer supported by B1 in below link
[SAP Business One Best-Practice System Setup and Sizing document ]
Jeyakanthan -
Clear printout when printing in dot-matrix printer but not in laser printer
Hi Experts,
When I am printing the output for change outbound delivery, output is clear in dot matrix printer like GI and and values are clearly getting printed, but when I use Laser printer no GI and details are fetched?
Kindly revert on this please, asap.
Thanks
Shireen.Hi Amiya,
you need to check the paperformat which is used. I'm pretty sure that there is a wrong paperformat selected. The supported paperformats are published in the official documentation of the printer-model.
~Florian -
Printing in Dot Matrix Printer
Hi to all,
As we know that the dos matrix printer supports dos prompt and thus printing speed and
life of the printing head is comparatively more than what we print the same in graphical format.
So when I tried to print from SAP Bone in dot matrix printer, the printing speed is very slow and quality of printout is not good enough.
Any clarifications on this regard would prove very helpful to me.
Regards,
Aditya
Consultant Business solutions.Do you use one of this printer types:
Dot Matrix, Printer, Needle Printer, Citizen ProDot 300 , Oki Microline
, Epson FX880, Epson FX890 ?
Here the stepwise I have tried :
In order to print using Dot Matrix printers, follow the below
instructions:
1. Run SAP Business One.
2. Click the upper menu 'File' and select 'Page Setup'.
3. The Print Setup window opens. Under 'Paper', in the field 'Size', select 'Letter' from the drop down menu.
4. Click OK to confirm your selection.
5. On your desktop, click Start => Settings => Printers.
6. Right click on the required Dot Matrix printer and select 'Printing Preferences...'.
7. Click the 'Paper/Quality' tab page and click the 'Advanced' pushbutton.
8. Under'Paper/Output'=> 'Paper Size', click on the underlined paper size(e.g. A4) and select 'Letter' from the drop down menu.
Note that if you leave the value 'A4', each page will be spreaded over 2 pages when printing using Dot Matrix printers.
1. Under 'Graphic'=> 'Print Quality', click on the underlined value (e.g. 230X250 dots per inch) and select '120X144 dots per inch' from thedrop down menu.
Note that in case the value '120X144' is not available you should select a similar value from the list.
After you do the stepwise, I am sure there will no problem any more. The slowly printing mostly caused by printer type and your hardware specifications for example your LAN, etc..
good luck...
Rgds,
null -
Which driver to use to print to a dot matrix printer?
All-
Hi, we are using Adobe Output Designer 5.7 to create invoice templates. We use a custom application that uses Adobe Output Central Server (5.6) to create invoices and print them to a network printer. We are about to do a new release in Chile, which requires a dot matrix printer be used for printing due to gov't regulations. Does anyone know what kind of print driver could be used to effectively print to a dot matrix printer? It seems like all the drivers we have used don't work.
Additionally, we also tried using the .pdf driver in conjunction with the Web Output Pak, but unfortunately that result is just as bad. Does anyone know of a workaround to get Pdf's to work with a dot matrix printer? By googling, I found that we could try copying the .pdf output and pasting into Word, but I haven't tested this yet and it makes for a cumbersome process.
Thanks,
AndrewHi Andrew,
Unless you can convert the PDF to a text file, and print that, I doubt there is any way to send PDFs to a Dot Matix printer.
If you're on Windows then one way is to use the 'windows' driver option in your template to generate the output directory for the target printer - this allows non-supported printers to be used with Output Server,
Regards,
Paul
Maybe you are looking for
-
How can i get my iPad back on the internet?
Everything wad down today...cable, internet, etc. Now it is back. My iMac is right back on line and all is well. The iPad, though, says I am not connected to the internet and nothing is working. How do I get the iPad back on line. I checked the
-
Problem loading texture with alpha channel
Hi there, I'm trying to load a texture from a png wich includes an alpha channel. Inside my texture loading routine I use some code along the lines of: // Uses the bitmatp creation function provided by the Core Graphics framework. CGContextRef imgCon
-
Stuck in Mac OSX Installer! How to get out?
SO GC
-
Hi, We ran SM35 to process the month end closing transctions;half way thro' it got terminated.This was run again.This time the run was successful. When i went to SM37 and compared the corresponding transactions in the relevant GL a/c [ using t/code:f
-
Problem with @Column annotation
Hi Everybody ! I'm using JDeveloper 10.1.3.4 and I'm building an application with EJB30 and ADF with JSF. In my entity I put: @Column(nullable = false, updatable = false, insertable=false) private Timestamp dat; The problem is that I can put