Is Apple TV able to connect to more then one tv

I was wanting to get Apple TV but I have 3 TVs can I connect Apple TV to all of them or do I have to buy a seaprate Apple TV for each tv.

Ideally you'd need one for each TV unless you want to unplug and move it around for each set you want to watch on.
It only has one TV output, which is HDMI - you might find some kind of HDMI splitter to run HDMI to all 3 TVs but that would not be cheap when you'd payed for all the boxes and cables, plus you'd have the same content on each TV.
AC

Similar Messages

Connection of more then one device to a PC

Hi,
I have a product which need to work with 4 devices (no specific model - each time can be a different device[s]), at the moment we are using the PC Suite, and we found a limitation that only one device can be connected to each server.
Is there is away to connect more then one device to a PC using the PC suite?
Thanks,
Idan

As far as I know the short answer is no. The same applies with acyive sync and windows mobile. You can only sync one device at a time as far as I know.

Can't connect to more then one server in a java appl.

Hi:
I'm connecting to OCS via java as the administrator without problems. But, even if I close the first connection
I can't open the second one without getting an user unknown error. If I connect only to one or the other everything works.
Here's part of the code:
// Get system properties
Properties props = System.getProperties();
props.setProperty("oracle.mail.sdk.esmail.encryption", "false");
props.setProperty("oracle.mail.sdk.esmail.driver_type", "thin");
props.setProperty("oracle.mail.ldap.connectssl","true");
props.setProperty("oracle.mail.ldap.sslport","636");
props.setProperty("oracle.mail.ldap.admin_dn","cn=xxxx");
props.setProperty("oracle.mail.ldap.admin_password",xxxx);
session = Session.getDefaultInstance(props, new OracleAuthenticator());
// Connect to the mailstore (Oracle)
OracleStore store = (OracleStore)session.getStore("esmail"); // esmail is the Oracle provider name
store.connect(owserver, -1, owuser, null);
store.close();
owserver="anothermachine";
owuser="anotheruser";
store.connect(owserver, -1, owuser, null);
System.exit(0);
Please help.
Regards,
Jerry

Almost forgot, here is the error I am getting.
ESDS error code - 10010] User Doesn't Exist
at oracle.mail.ldap.ESDSContext.cacheUserAttrs(ESDSContext.java:690)
at oracle.mail.ldap.ESDSContext.cacheCallerParams(ESDSContext.java:534)
at oracle.mail.ldap.ESDSContext.<init>(ESDSContext.java:145)
at oracle.mail.ldap.ESDSDirServerAccess.ESDSClientLogon(ESDSDirServerAccess.java:829)
at oracle.mail.sdk.esmail.OracleStore.connect(OracleStore.java:921)
at WriteOJMA.connect(WriteOJMA.java:52)
at ReadOJMA.main(ReadOJMA.java:123)
Exception in thread "main" javax.mail.MessagingException: [ESDS error code - 10010] User Doesn't Exist
at oracle.mail.sdk.esmail.OracleStore.connect(OracleStore.java:1023)
at WriteOJMA.connect(WriteOJMA.java:52)
at ReadOJMA.main(ReadOJMA.java:123)

Can I use more then one apple ID on my computer/osx app store

Hi,
I use my MBP/iMac/ipad/iphone for both business and home. Right now everything is setup to my home apple id (and I have made quite a few purchases with that). With the release of the osx app store and FCPX, my company wants to buy these for my computers. But they want to do this on their apple id. Can I run more then one id on a mac? How can I make this work as I know they will want me to start getting more apps as they are released.

You can have apps from multiple Apple IDs on one Mac. The issue will be that to update Mac apps bought with A ID #1 will require signing into A ID #1 in the MAS. And later when apps bought with A ID #2 need an update you will need to sign into A ID #2 in the MAS to update them. If you can keep that straight and can abide that requirement, there should be no issues.
The same will be true to update iOS apps, but using iTunes.

Using more then one Multitouch.inputMode on one screen

Hi All,
I have figure out that on one screen I am not able to work with more then one Multitouch.inputMode. As per my requirement I am having two different component on the same screen,one is using the TouchEvent and another is using GestureEvent.I am getting the issue that if I am using both on the same screen then the GestureEvent is not firing.
Any help will be appricated.
Thanks in Advance.
With Regards,
Shardul

Or you could use gestouch:
https://github.com/fljot/Gestouch
With that you can detect various gestures all in one gesture mode. It may solve your issue.

Can printer connect to more than one network?

Hello.
I just bought the wireless HP deskjet 3050 printer. I've connected it to the internet (network) and it's working perfectly. Is it possible to connect to more than one network? We have more than one internet line in the house so I was wondering if I can set it up for both lines. I understand that I can print with multiple computers on the same network (and I am able to do so), but how about on different networks?
Thanks.

No, it only has one network connection device so can only connect to one at time, sorry.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Can I connect with more than one iTunes acct

Can I connect with more than one iTunes acct

Laxman25 wrote:
If its multiple apple id's on one computer you can't because you have to log out of one and login on another.
I've only got one ID so I can't test but Winston says you can be signed into iTunes with multiple AppleIDs (i.e authorise iTunes for more than one ID content) at the same time, and that even different account content will stream so long as Home Sharing ID in iTunes matches AppleTV Home Sharing ID.
AC

HT5622 Can Face Time be used to connect with more than one person at a time?

Can I connect with more than one person at a time when using Face Time?

You mean like a conference call? No, unfortunately.

Can you connect more then one external screen to a mac with one mini display point?

Does any one know if you can connect more then one external screen to a mac, with one mini display point?

This company has a dual monitor solution for DisplayPort;
http://www.matrox.com/graphics/en/products/gxm/dh2go/

Can you have more then one iphone control the apple tv at the same time?

Can you have more then one iphone4 as a remote for one apple tv at the same time?

iCloud, iTunes & Apps Stores can be assigned different AppleID's from the Settings app. I have my phone and my wife's set up this way for the very reasons you are describing. Works well.

Can I connect more then one cDAQ-9188 in the same network?

Hi, I have one question for you.
Can I connect more then one cDAQ-9188 to moxa EDS-G205-T for querying simultaneously in the same PC?
thanks in advance for any response.

You will need a network switch and make sure they are different IP Addresses, but same subnet.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Ipod will not stay connected for more then a few seconds

I was going to update my nano this morning after downloading the newest version of software, and first off it said the firmware was corrupt. so then I restored it, and it would not restore to the new version so i used the older version. the ipod seems to work in my hand but when i connect it to my computer it will not stay connected for more then a few seconds, then it ejects its self, but itunes still shows it as being there even though the rest of the computer does not
I have not had any issues with it since i bought it which was last june.
any ideas?
John

Hi John,
I would suggest, with your iPod disconnected, that you force your iPod into disk mode (following the instructions in this article)
Connect your iPod to your computer.
Then, try restoring it in iTunes while it is connected in disk mode.
Can you successfully restore your iPod?
If so, when the restoring and resyncing process is all complete, now update your iPod to the latest firmware.
Any success with trying that?
-Kylene

TS2972 Getting more then one itunes library on apple tv

Can I have more then one library linked to the apple tv at a time? If so how can I add the library? The computer home sharing is on! And so its the apple tv home sharing..

Yes, but they both have to be under the same home sharing ID

I have a mac book pro and when I turned on iChat it would not let me video chat with more then one person even though I was able to in the past. It only showed an icon to video chat with one person. Please help!!

I have a mac book pro and when I turned on iChat it would not let me video chat with more then one person even though I was able to in the past. It only showed an icon to video chat with one person. Please help!!!! ASAP

Hi,
Check the iChat Menu > Preferences > Video Section > Bandwidth setting.
iChat needs to see a Minimum of 128kbps to do 1-1 chats in Video
For 3 and 4 way chats it needs 384kbps
Set the Bandwidth to 500kbps if it is set lower.
Also check the speed you are getting from your Internet supplier.
9:28 PM Thursday; February 23, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Simultaneous connection of more than one unit of GPIB device

Dear all out there,
Would anyone has any idea/ solution in programming of ATE that makes Simultaneous connection of more than one unit?
What's the better, if not the best, way of initialisation, acquisition and report generation for such system? without significant delay incurred.
For instants,
1. Initialise X number of, say, Agilent 34401A multimeter (GPIB)
2. Acquiring of meter readings from each meter, limit check and write to respective report
Any idea/ sample code/ solution is very much appreciated.
Regards
ian.f k
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com

albert geven wrote in message news:<[email protected]>...
> The connection of multiple multimeters to the gpib bus is normal, the
> only thing you need to do is switch them each to a unique address on
> this bus.
> Your program can best initialise all multimeters once in the beginning
> of your program and read out those meters when appropriate.
With many instruments there are two types of "initialise."
One type, which is a reset, choose range, etc., as you suggest can
be done at the beginning of a program or section of a program.
However, the other type of initialize is to sent the SCPI INIT command
to the instrument. This command tells the instrument to take a measurement
(or scan of measurements).
When dealing with multiple multimeters, there are at least 2 ways of
handling measurements. The slow way deals with one instrument at a
time -- using the SCPI commands INIT, wait FETCH?, or perhaps just READ?
sent to each instrument. It is slow because each instrument must wait
for the previous instrument to finish before it can start.
The better way is to set up each instrument for the desired measurement.
If simultaneous triggering is needed, either use some type of external
trigger or BUS trigger if the instrument can use it. After all instruments
are set up, issue the INIT command to each instrument, then trigger.
when all measurements are completed, use the FETC? command to get the
results from each instrument. Note that there may be Plug&Play drivers
to issue these commands for your instrument.
[email protected]
www.CompleteTest.com

Is Apple TV able to connect to more then one tv

Similar Messages

Maybe you are looking for