Is ATA and ATA150 the same interface?

Is this hd compatible with a MacBook?
http://www.newegg.com/Product/Product.asp?Item=N82E16822146053

When you boot from the install DVD can you see it under the system profiler or disk utility to initialize it for the Mac? Most HDs come formatted for Windows and while our Mac should still see it, you will want to format it HFS+ for use in your Mac.

Similar Messages

  • ¿Can Extended and Ethertype (input) ACLs be applied to the same interface?

    Hello team:
    ¿ Is it possible to apply one Extended ACL and one Ethertype ACL, in input mode, to the same interface?
    Thank you very much in advance.
    Mariela Musitani

    Thank you very much Borys. I assumed that it was possible, but the documentation was not clear in this context.
    regards, Mariela

  • Stetting up FTP and SFTP adapters for the same interface

    Experts-
    I have a situation in which client has a requirement to setup both FTP and SFTP adapters (from adapetive adapters) for the same interface. They want to have a copy of file locally and also want a file to be sent out securly using SFTP. In my interface which was previously developed they have used one business system and added FTP and SFTP to the same. If try to add new Receiver Agreement it will say that the object already exists as the Interface Mapping is same.
    Please send me any suggestions which would resolve my problem

    Hi Hari,
    As you cannot create two Receiver agreement using only one receiver interface , please create a new receiver Interface, add that in interface determination step and then assing a different channel to new receiver agreement.
    If your requirement is to store the file ,i would suggest write the file in your unix directory using NFS( /usr/sap...). then run a AFT job (if already set up in your landscape) to transfer file securly to target destination.Not sure if its feasible in your case otherwise you can use  SFTP for the secure transfer.
    Best Regards
    Srinivas

  • How to config. different Operations of the same Interface to different BPM

    Hi Gurus
       I have a very urgent problem.
       The requirement is like this:
       Customer creates an invoice in A1S and release it. Information of the invoice is retrieved via two service interfaces:
            CustomerInvoiceProcessingInvoiceAccountingOut
            CustomerInvoiceProcessingReceivablesPayablesOut
            with operation NotifyOfInvoice;
       These two interfaces will transfer the information into XI and the information will be filled into a BAPI, BAPI_ACC_DOCUMENT_A1S, to R3. Then the finacial document together with the invoice will be created in the R3.
       when customer cancels the invoice in A1S, Information of the cancellation is retrieved via the same two service interfaces:
            CustomerInvoiceProcessingInvoiceAccountingOut
            CustomerInvoiceProcessingReceivablesPayablesOut
            with operation NotifyOfInvoiceCancellation;
       These two interfaces will transfer the information into XI and the information will be filled into a BAPI, BAPI_ACC_DOCUMENT_REV_POST, to R3. Then the reverse finacial document will be created in R3.
        My solution is like this:
        1. for invoice creation:
         Both messages sent to BPM_1, then send to R3.  3 interface determinations are needed for 3 abstract interfaces.
        2. for invoice cancellation:
         Both messages sent to BPM_2, then send to R3. 3 interface determinations are needed for 3 abstract interfaces.
        My problem is this:
        No matter during creation or cancellation, the same interfaces are triggered. The related receiver determination will distribute the information to both of two BPMs. However the information only contains data of one operaton: creation or cancellation. Error messages will appear in monitor for the other BPM. For example, when customer creates an invoice, the information only contains data of creation whereas it is sent to two BPMs via the receiver determination. the BPM for cancellation surely can not deal with this information then error appears.
        My question is : how can i solve the problem? How can i avoid the appearance of the error? thanks
    Message was edited by:
            SAP LCR

    Hi,
    In the receiver determination you can route the message to the RIGHT BPM according to the content of the payload. So each time only one BPM is called.
    Regards,
    Hui

  • Webvpn and anyconnect on same interface

    Hello !!
    Can we configure WebVPN and anyconnect on same interface ?
    We have ASA 5520 running with code 9.1(2) with vpn plus license installed. Webvpn is already configured in it. users are already using it. We have a legacy VPN concentrator for RAVPN. Now the client want to move all the RAVPN users from VPN concentrator to ASA using anyconnect.
    As we already have webvpn on the asa box, can we configure anyconnect on the same firewall on same interface. ? if so what are the parameters we need to consider.
    I am attaching the sh ver of firewall . Any help in this regard is highly appreciated.
    Cheers,
    Octopus.

    Hi,
    The answer is yes.
    Check this for more information:-
    https://supportforums.cisco.com/discussion/11181216/webvpn-and-anyconnect
    http://www.cisco.com/c/en/us/td/docs/security/asa/asa80/configuration/guide/conf_gd/svc.html
    Thanks and Regards,
    Vibhor Amrodia

  • AP and AR in same interface?

    Hi,
    We are planning to do the AP and AR of a legacy system in SAP through interface.  If both AP and AR are done from a common inventory, can we do both the AP and  AR in the same interface? Or can it be done in two different interfaces? What is the difference between doing both in the same interface and two different interface?
    Please give me some info on it. I'm new to FI..
    Thanks..
    Uma.

    I can't think of any. If you separate them, you can run them in parallel, so that should be quicker too.
    But in the end, I think it's a business decision.
    Rob

  • NATting using the same interface ?

    hi there,
    I was wondering, is it possible to set up NAT/PAT for packets arriving/leaving (after being routed) the same interface , e.g. not going "through" the router ?
    I think that this is not possible but I need to be sure... Any help ?
    Thanks,
    Alex

    That is called nat on a stick.
    http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094430.shtml
    Once you understand how to do this NAT will never confuse you again.
    There may be a newer method with the new NAI interfaces in the latest IOS but I have not had time to test this and have not seen any documentation on using these new nat features for this purpose.

  • To upload a RTF and a PDF file to SAP R/3 and print the same through SAP

    Hi,
    I have a requirement to upload a PDF file and a RTF file to SAP R/3 and print the same.
    I wrote the following code for uploading a RTF file to SAP R/3 and print the same. However, the problem is , the formatting present in the RTF document( bold/italics..etc) is not being reflected when I do the 'print-preview' after the executing the code below :
    report z_test_upload .
    data: begin of itab occurs 0,
             rec type string,
          end of itab.
    data: options like itcpo.
    data: filename type string,
          count type i.
    data: filetype(10) type c value 'ASC'.
    DATA: HEADER  LIKE THEAD    OCCURS   0 WITH HEADER LINE.
    DATA: NEWHEADER  LIKE THEAD    OCCURS   0 WITH HEADER LINE.
    DATA: ITFLINE LIKE TLINE    OCCURS   0 WITH HEADER LINE.
    DATA: RTFLINE LIKE HELP_STFA OCCURS   0 WITH HEADER LINE.
    DATA:   string_len TYPE i,
            n1 TYPE i.
    selection-screen begin of block b1.
      parameter: p_file1(128) default 'C:\test_itf.rtf'.
    selection-screen end of block b1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
      CALL FUNCTION 'F4_FILENAME'
           IMPORTING
                file_name = p_file1.
    start-of-selection.
    move p_file1 to filename.
    call function 'GUI_UPLOAD'
         EXPORTING
              filename                = filename
              filetype                = filetype
         TABLES
              data_tab                = itab
         EXCEPTIONS
              file_open_error         = 1
              file_read_error         = 2
              no_batch                = 3
              gui_refuse_filetransfer = 4
              invalid_type            = 5
              no_authority            = 6
              unknown_error           = 7
              bad_data_format         = 8
              header_not_allowed      = 9
              separator_not_allowed   = 10
              header_too_long         = 11
              unknown_dp_error        = 12
              access_denied           = 13
              dp_out_of_memory        = 14
              disk_full               = 15
              dp_timeout              = 16
              others                  = 17.
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    loop at itab.
      string_len = strlen( itab-rec ).
      n1 = string_len DIV 134.
      ADD 1 TO n1.
      DO n1 TIMES.
        rtfline-line = itab-rec.
        APPEND rtfline.
        SHIFT itab-rec BY 134 PLACES.
      ENDDO.
    endloop.
    HEADER-TDSTYLE = 'S_DOCUS1'.
    HEADER-TDFORM = 'S_DOCU_SHOW'.
    header-tdspras = 'E'.
    CALL FUNCTION 'CONVERT_TEXT'
      EXPORTING
      CODEPAGE               = '0000'
        DIRECTION              = 'IMPORT'
        FORMAT_TYPE            = 'RTF'
       FORMATWIDTH            = 72
        HEADER                 = header
        SSHEET                 = 'WINHELP.DOT'
        WITH_TAB               = 'X'
        WORD_LANGU             = SY-LANGU
        TABLETYPE              = 'ASC'
      TAB_SUBSTITUTE         = 'X09  '
      LF_SUBSTITUTE          = ' '
      REPLACE_SYMBOLS        = 'X'
      REPLACE_SAPCHARS       = 'X'
      MASK_BRACKETS          = 'X'
      IMPORTING
        NEWHEADER              = NEWHEADER
      WITH_TAB_E             =
      FORMATWIDTH_E          =
      TABLES
        FOREIGN                = RTFLINE
        ITF_LINES              = ITFLINE.
      LINKS_TO_CONVERT       =
    if sy-subrc <> 0.
    endif.
    CALL FUNCTION 'PRINT_TEXT_ITF'
      EXPORTING
         HEADER        = newheader
         OPTIONS       = options
    IMPORTING
      RESULT        =
      TABLES
        LINES         = itfline.
    if sy-subrc <> 0.
    endif.
    Any hints or suggestions to solve this problem will be highly appreciated.
    Thanks,
    Avra

    Hi Vishwas,
    Check out the thread [Efficient way of saving documents uploaded|Re: Efficient way of saving documents uploaded by users; and check the blog by Raja Thangamani.
    Also check the thread [Export Images through Function Modules   |Export Images through Function Modules;.
    Hope it helps you.

  • How to send IP Addr in an alert and receive the same?

    1. I have an 'alert handler' process that's sending an alert using 'Create Alert' activity.
    2. I have a listening/receiving process that get's triggered by this alert from the 'alert handler' process.
    3. The listening/receving process telnet's to a router. I want the listening/receiving process to extract the IP Address of the router from the alert that triggered this listening proecess.
    4. I tried sending the IP address of the router as 'Parameter 1' using the 'Create Alert' activity in the 'alert handler' process.
    5. In the receiving process, in order to telnet to the router, I chose 'Execute on this target reference' option for the 'Open Terminal' acitivity, but was unable to access 'Paramter 1' of the alert. It shows greyed out.
    Question:
    What is the best way to send the IP address of the router in the alert and receive the same in the listening process such that I can telnet to that router in the listening process?
    Please note: tried creating a 'terminal target'...there is no way for me to supply IP address info from outside into terminal target...looks like terminal target only takes a hard coded IP address or host name.
    Will appreciate your prompt response please.
    thanks,
    Jamal

    We discussed this, but just to post here. To view alert or other tasks parameters via the reference variable fields you have to select the show advanced checkbox.

  • HT201272 I have always had and used the same Apple ID, so where are the rest of the songs I bought from itunes? I've bought at least 400 songs and I only am being able to download 178. Where are the rest of my purchases?!

    I have always had and used the same Apple ID. I have changed credit card information on my Apple ID account several times though. Does that make a difference when downloading past purchases? I'm very angry at Apple and Itunes because I have been using itunes since 05/2005 and I do not have even close to the amount of songs and albums that I have purchased from itunes. If the credit card info does make a difference even though the account is the same one then itunes needs to make sure to notify users of this because I am not the only one who is wondering this same thing. I have numerous friends who i've talked to about this and they say the same thing, that they too have songs purchased in the past that have disappeared when trying to download past purchased items. It should not make a difference. $12 is $12. Especially since I have ALWAYS used the same account. If itunes does not change their ways, I will not be purchasing songs or anything else for that matter from them ever again. I will go back to buying CDs where I KNOW that it will always be with me and I don't have to deal with this. I will also make sure to find a better more reliable source to download music from and will make sure everyone I know and come in contact with knows what it is and how much better it is than itunes. There should be no experation date on the music I PURCHASE, nor should there be any other little loop holes that allow itunes to rob us of rightfully purchased products. What's the deal itunes?? 

    mannyace wrote:
    Thanks for the response.
    So I basically won't run into any trouble? I
    There should be no issues. Its designed to work like that.  You don't change Apple IDs just because you get a new device.
    mannyace wrote:
    Thanks for the response.
    Is there any chance that the phones can fall out of sync?
    Unlikely. But nothing is impossible.   Though I don;t see how that would happen. As long as both are signed into the Same Apple ID / iCloud Account they will be N'Sync. (Bad Joke)
    mannyace wrote:
    Thanks for the response.
    If I get a message or buy an app or take a photo on the iPhone 5, how do I get those things onto the iPhone 6?
    If you buy an App, you have 2 ways to get it to the iPhone6: If Automatic Downloads is enabled in Settings->iTunes & App Store, it will automatically download to the iPhone 6 when you buy it on the 5 and vice versa if you buy it on the 6, it will download to the 5.
    Alternatively, you can simply go to the App Store App->Updates->Purchased and look for the App there and download it. Purchased Apps will not require payment again. i.e They'll be free to download to the iPhone 6 once purchased.
    SMS Messages will sync over using Continuity as long as they are on the same Wifi network. Otherwise, restoring the iPhone 5 backup to the iPhone 6 will transfer all messages received up until the backup was made onto the iPhone 6.
    Images, can be transferred either through Photo Stream
    My Photo Stream FAQ - Apple Support
    Or any Cloud service you want such as Dropbox, or One Drive.
    mannyace wrote:
    Also, something i forgot to ask initially: Should I update the iPhone 5 to iOS 8 first or does that not matter?
    If you want the Continuity features as explained above you need to update the iPhone 5 to iOS 8. Otherwise its not all that important.

  • I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

    I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen.  I've rebooted, I've reinstalled several times and get the same result.  Two days wasted!

    I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen.  I've rebooted, I've reinstalled several times and get the same result.  Two days wasted and I can't use my computer!!

    I don't know if you've already resolved your problem, but I had the same thing, it took me 6 hours to fix it. I had the exact same as you, installed the update and then it went to a white screen. After trying start up holding down cmmd r or holding down the alt key to try to install it again, nothing worked, same result every time. Then an angel came to me here somewhere but I can't find it now to thank him. Start in safe mode, press shift once you hear the start up chime and hold it down until you hear it again. Installation completion box came up and it was working. turn off computer and start up again normally and all is well. Except my final cut pro x doesn't work with it, have to update that now too. same as when I updated to mavericks.
    Hope this helps.

  • We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double

    We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?

    The most common reason is different versions of Flash, or different versions of web browsers used.  Some users may elect to not have Flash installed at all because of the processor overhead of Flash.  If you are going to make an application for a client, check what operating system and browser versions they are using first.  Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
    P.S. MAC is an acronym for Media Access Control.  Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc.

  • MacBook pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, etc

    MacBook Pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, line .. the noise like-fan going on, then turn off and turn on again. Tried starting holding option command P and R key and didnt work either. Starting to think I have lost all my data inside

    Try a SMC reset.
    http://support.apple.com/kb/ht3964
    It might be helpful if you indicated the exact model/year of your MBP.  Are you running Lion OSX?
    Ciao.

  • When I try to open a download PDF I get message to install Adobe Reader. I do it and get the same message already installed. I close Safari and reopen but get same message to install Adobe

    When I try to open a download PDF I get message to install Adobe Reader. I do it and get the same message already installed. I close Safari and reopen but get same message to install Adobe

    You don't provide any details, but from the sound of it you are trying to open an online PDF in a browser that does not use the Adobe Reader plugin: http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

Maybe you are looking for